Clone XP system with CSA 6.0.2?

Can I clone an XP system with CSA 6.0.2 installed? I saw the document about 5.x, but I was wondering if that had changed for 6.0.2.

I'm sure that you can make the clone. There is nothing within CSA that should stop the OS from working. However, I think you might have some issues with the registration counters. Can you share the 5.x link ?
Matthew

Similar Messages

Systems with CSA not boot

After update from 6.0.1 to 6.0.2 some systems with CSA cun`t boot.
If manualy delete agent (in safe mode) - everething ok.
Few systems butable, but agent process takes more then 90% processor resourses.
Logs on CSA MC are clean
Any ideas? Manual uninstall agent on few hungreds workstaitions is unreal...

There has been a recent bug discovered with interaction of CSA and Windows 7 hosts where a file access control rule which implements digital suignature checking can cause a system to "hang" after entering credentials. The bug is CSCtg98849. The following workaround is provided in the bug:
Edit the "Base - Digital Signing of Downloaded Executables" rule module and disable the file access control "Send downloaded executables for scanning if opened for read".
Save the change.
Generate rules and deploy to affected hosts.
[Wrap text] [Edit this enclosure]
Release-note: Added 05/25/2010 06:26:54 by scfringe
[Unwrap text] [Edit this enclosure]
Release-note: Added 05/25/2010 06:26:54 by scfringe
[Unwrap text] [Edit this enclosure]
SS-Review: Added 05/25/2010 06:13:20 by scfringe
[Wrap text] [Edit this enclosure]
SS-Review: Added 05/25/2010 06:13:20 by scfringe
[Unwrap text] [Edit this enclosure]
SS-Review: Added 05/25/2010 06:13:20 by scfringe
There has also been an issue seen where agents that have not received the new 6.0.2 binaries, but have had 6.0.2 rules pushed encounter issues. The workaround in this instance is to schedule an update for the agents.
It would be advatageous to open a service request with TAC to effectively diagnose the issue, and ensure this is the proper bug for the behavior.
Scott
What
How Bad
Who
Versions
Status
   A-Assigned
Found
customer-use
Original-found
customer-use
Project
CSC.security
Product
csa
Component
client
Software
none
Obs-software
none
Hardware
none
Keyword
none
Priority
P3
Severity
   severe (Sev2)
DE-priority
2
Dev-escape
Y
BadCodeFlag
N
DE-manager
ibonias
DTPT-manager
vidhya
Engineer
bipswain
Submitter
scfringe
Assigner
pgiang
Version
006.000(002.126)
Original-version
006.000(002.126)
To-be-fixed
006.000(002)
History
Histogram of CSCtg98849: Covering 2 days and counting, currently in A-Assigned state.
          N -> A [    0] |
          A ->   [    2] ------------------------------------A-----------------------------------[100.00%]
                          <-----------------------------------+----------------------------------->
                    25-May-2010                         26-May-2010                         27-May-2010
cdreier
05/26/2010 09:52:05
Headline:
CSA: Windows Login Hangs or Takes Excessive Time with CSA Enabled   --> CSA: Windows 7 Login Hangs or Takes Excessive Time with CSA Enabled
cdetsbsi
05/25/2010 10:08:31
Trouble-Tickets:
--> 614262487
pgiang
05/25/2010 06:35:29
Assigner:
--> pgiang
pgiang
05/25/2010 06:35:29
Assigned Date:
--> 05/25/2010 09:35:29
pgiang
05/25/2010 06:35:19
Engineer:
--> bipswain
pgiang
05/25/2010 06:35:01
Status:
N   --> A
pgiang
05/25/2010 06:35:29
To-be-fixed:
--> 006.000(002)
cdetsbsi
05/25/2010 06:29:31
Trouble-Tickets:
--> 614327539
cdetsbsi
05/25/2010 06:29:31
Urgency-desc:
NA   --> P3
scfringe
05/25/2010 06:26:54
Note Title:
--> Release-note
scfringe
05/25/2010 06:14:01
Summary:
-->
scfringe
05/25/2010 06:13:20
RNE-Approval-Flg:
N   -->
scfringe
05/25/2010 06:13:20
Note Title:
--> SS-Review
scfringe
05/25/2010 06:12:14
Defect Created:
-->

Installation Options for iMovie HD on Snow Leopard system with iLife '09

Greetings and thank-you for contributing suggestions on what is a well worn subject. I have read many of the posts existing on this topic and am trying to nip some details.
I have a late 2006 iMac that came with Tiger and iMovie HD which is now at version 6.0.3. When I upgraded to Snow Leopard (Boxed Set) I got iLife 09 but, as it was supposed to do, it left me iMovie HD which is what I have used. I have both sets of installation DVD's. (from the iMac and the SL upgrade)
Today I got a new MacMini and am plotting how to get iMovie HD on it.
I gather that I first need to remove iMovie 09 from the Mini. I do that by dragging its application bundle in finder to the trash and removing any receipt packages.
Do I have to remove all of the iLife 09 applications or just iMovie 09?
Then, I reinstall either all of iLife 06 from the iMac DVD or just iMovie HD. After that I can load iLife 09 from the SL DVD. That will leave the iMovie HD on the system but upgrade everything else.
Should I run software update from iMovie HD to try to get the 6.0.3 version or download and run the upgrade image? Does it matter?
I am good to go. Did I miss anything?
I also have a SuperDuper clone of the iMac system. Another possibility is to boot from that and clone it to the new Mini. Does anyone think this is a better idea?
Thanks again for the insights of your experience.

I think the issue is that if you install iMovie 06 on a system with iMovie 09 installed, iMovie 6 has no knowledge that iMovie 09 exists. Therefore iMovie 6 installs itself in the iMovie folder in the Applications Folder and assumes anything in there is old and can be trashed.
Apple fixed this with iMovie 6.04, but this is no longer available.
But if you install iMovie 6 first, and iMovie 9 second, iMovie 9 knows about iMovie 6 and will move it to a folder called "iMovie - Previous Versions".
In your case, I would uninstall iMovie 09 as you started to do, then run the migration assistant, then reinstall iMovie 09.
It should also work to create a folder on your old system called "iMovie - Previous Versions". Drag the iMovie 6 app into this folder and verify that it works. Then do the Migration Assistant. This should work, but I hesitate to recommend it because I have not tested it. Best case, it installs and you did not even have to uninstall iMovie 09. Worst case, delete the iMovie folder and reinstall iMovie 09.
For what its worth, I recently did a Migration Assistant from a SuperDuper clone (after a failed hard disk) that had both iMovie 09 and iMovie 6 installed, and it worked fine. But I have not tried your scenario.
I would use Migration Assistant because then you have the correct version of Snow Leopard for your system. You may not if you use a clone. A new machine may have microcode that is not released to the general release of OSX for several months. If your Mini is a used one and at least 6 months old, a clone should work OK.

How to change SID on a SAP System with Maxdb ?

Hello,
I've tryed to migrate /clone a productive system from physical to virtual for testing, and it went OK.
Now, i've done the same to another physical machine and SAP 4.6C r3 goes up,as well as the database MaxDB 7.5 on the new machine.
but now i have two problems:
First, the license key: i have to request a new one. i believe that i can do it using https://websmp110.sap-ag.de/licensekey
Second: the SID is the same, as i have clone the system from one side to another. Same OS, same kernel, etc etc etc.
In order to achieve the possibility to transform the new cloned system in a DEV system for my SAP landscape, i must rename the <sid> of my SAP.
I've changed already the SAPSYSTEMNAME = PRD to SAPSYSTEMNAME = DEV, created a new user like "devadm" renamed the directories where i could find "prd" to "dev" and even in the /home/<sid>adm files i've changed everything from PRD to DEV.
However, this have not worked for me. As that did not worked out, made the "cloning" again. And now i' again with the problem of entering the new license key ( i believe i can request it via that webpage mention above) and changing the <sid> of the system.
Is there any sap not where i can see how to change the <sid> / SAPSYSTEMNAME ?
Thank you
my system is a RHEL5 with MaxDB 7.5 64 bits
Filipe

Hi Filipe,
afaik the SID of a SAP instance cannot be changed later on.
But this is not a db-topic - so you're basically asking the wrong people here in the forum.
Perhabs is more suited for this question.
Concerning the licensekey : yes, you will need a new one if you change the hardware or db platform.
KR Lars

Lucreate fails with update 8 packages on system with zone

I have a Solaris 10 update 7 system with a single zone. Before installing the update 8 LU packages I was able to create a new BE without error. After adding the packages, lucreate gives the following error:
Creating clone for <rpool/ROOT/10u7ZFSa/zoneRoot/common@10u8> on <rpool/ROOT/10u8/zoneRoot/common-10u8>.
cannot mount 'rpool/ROOT/10u8/zoneRoot/common-10u8': legacy mountpoint
use mount(1M) to mount this filesystem
ERROR: Failed to mount dataset <rpool/ROOT/10u8/zoneRoot/common-10u8>
legacy is not an absolute path.
WARNING: split filesystem </> file system type <zfs> cannot inherit
mount point options <-> from parent filesystem </> file
type <-> because the two file systems have different types.
Any clues?

Hi Ish68,
It looks like the previous uninstallation didn't go through completely and that might cause conflict during the new installation. It is recommended to remove the program manually from Control Panel and if it still fails you can try to run the standalone uninstaller from F-secure. You can refer below link for the steps:
Uninstallation steps :
https://community.f-secure.com/t5/Security-for-PC/How-do-I-uninstall-the-product/ta-p/15384
Installation steps for F-Secure SAFE :
https://community.f-secure.com/t5/Security-for-PC/How-do-I-install-Internet/ta-p/43585
Thank you.

R12 shared application file system with Rac cloning help

Hello,
We have R12 with two application servers(Shared File system) and two db servers(on RAC). The same setup we have on test as well. We are using linux servers. Can anyone help me with cloning steps? Shared file system to Shared file system and RAC to RAC cloning. I am waiting for your replies.
Thanks
Mehmood

Hi,
Please refer to:
Note: 783188.1 - Certified RAC Scenarios for E-Business Suite Cloning
Note: 559518.1 - Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone
Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
Note: 756050.1 - Troubleshooting Autoconfig issues with Oracle Applications RAC Databases
Thanks,
Hussein

Central system administration (CSA) in solution monitoring

Hello,
I want to configure my solution manager for central system administration (CSA) which is a service provided under solution monitoring of transaction dswp.
I couldnt find any documents for this configuration.
Could you please help me out..
Regards,
Gurudath Pai

Hi Gurudath,
If you have an s-user id, step-by-step tutor files with screenshots are available at
https://service.sap.com/rkt-solman > Solution Manager > Solution Manager 7 > Technology Consultant & System Administrator > System Monitoring, Administration
Before configuring CSA, you have to:
1. Perform basic settings for Solman (use wizard based approach)
2. Setup the system landscape
3. Create solution
4. Now you can configure CSA
Revert if you need clarifications
Prasad

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

SSO for application systems with local users?

Hi all, I'm new to Oracle Identity Management. My company is going to implement SSO for inhouse applications. However, some applications have their own local users (e.g. admin, guest, etc.) who have to login to the application system through the same interface. We put all organization users in an Oracle enterprise Directory server, which is the authentication backend of the Access Manager. After implementing webgate, such local users can't get authenticated. I'd like to know if it's possible to configure particular users/applications to bypass SSO and use local authentication? Thanks.
Rgds
/ST wong

Possible solution is to create a new entry point for local users. Create two proxies one for actual user entry and another for local user. You can restrict n/w access to proxy with local login so that only few hosts based on your requirement who needs to access system with local accounts. This way you will have two web sites for single application.

Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long. Many of us have experienced difficulty connecting to banking and other secure sites. On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome. The problem started after the installation of 10.7.4. I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

Slow System with K7N420

I have a system with a K7N420 in which I had 256MB(x2) of Crucial memory. I stole on stick for a new box I was building while I waited for prices to go down. When they did I moved the second stick back to the K7N420 box. When I moved it back I also did some live updates on the drivers. Now the system takes a minimum of ten minutes to boot. At least 8 of those bedfore the USB comes up (intellimouse goes red?). When I check the system it shows that I only have 480MB of memory instead of the 512MB that is there. I boot seperatly on each card and they each register as 224MB. I have moved them from slot 0 to 1 or 2 with the same results. I upgraded to BIOS V2.8 and that didn't help. Have I introduced something ro has the board gone bad? Any suggestions? Thanks.

32mb goes to the onboard video, but the long boot problem?
Well I am thinking one of those updates is causing problems or your HD may be going bad. If you have nothing to lose but time then I suggest a clean install, SP1 and then the unified drivers 2.03.
Stay away from live update or any MSI drivers for now.
Oh and if you used BootVis from micromush that could also be causing some problems.

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

How do you install Windows 8.1 on a system with multiple hard drives?

Specifically a system with a User folder located on more than one drive. I have programs installed on both drives in order to save space on one (a small SSD boot drive). Upon trying to install windows 8.1, the Windows Store tells me my PC can't run Windows
8.1 and gives me the error 0xc1900102. Suggestions?

Got it working :D... But it eats some time tho...
First run a cmd with admin privileges.
Then mklink /j C:\Users D:\Users
(Change D if you have users on other drive)
Now follow this guilde untill the profiles directory
http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html
Change it to %SystemDrive%\Users
Finish the guide and let it do its thing. (This will leave your Users map on the HDD)
Now activate the Administrator account
http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windows-8-a.html
Remove the mklink of C:\Users. Then copy the (hidden) Default User profile from D:\Users to C:\Users (yes create Users on the C partition)
Then log off and log in as the admin account.
Create a new online account (get an alternate email or make an account alias at https://account.live.com/summarypage.aspx)
Log in with that account.
Download and install the windows 8.1 Upgrade and let it finish everything (Took 3 hours at me)
Then login with your main account. It will generate a new account.
Restart your PC and login with the admin account.
Goto C:\Users and look what name it got. If the name is crappy then you can rename it at:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\<your profile ID>
Then do a mklink /j C:\Users\<ProfileName> D:\Users\<ProfileName>
Now restart the pc and login on your main account.
If everything went well you will have your old account back.
Now you can remove the C:\Users map and do a mklink /j C:\Users D:\Users
P.S. My store doesn't work anymore after this...

HT1923 I have a Vista Operating system with 2 users. Somehow I got two different play lists each with one user. One is too big for the storage and has a vast amount of duplicates. Can I delete the one that is twice as large and then access the other li

I have a Vista operating system with 2 users. Somehow I got two diffent libraries for the users. How can I delete the one and then access the correct library on the other users profile?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Unable to syndicate same Remote System with differnt value

Hi,
I am working on MDM 7.1 SP05 and I have the following issue with syndication:
I have a remote system table (Key Enabled) with System as Non-Qualifier and value as Qualifier and I have values in the MDM Datamanager as
MDM ID, Remotesystem (Multivalue Qualifier Table with Key Enabled)
111,((Qual1-Key,Val1),(Qual1-Key,Val2),(Qual1-Key,Val3))
When I syndicate I see only one value as 111, (Qual1,Val3)... But I want to have all the Qualifiers-Key with multiple values.. Where as in MDM 5.5 I can see all the Qualifiers with out any issues..Is this a restriction in MDM 7.1?
If I map System instead of Remote Key of Qualifier Table then I can see multiple times of same remote system with appropriate values.. But If I map remote key then I see the consolidated/the latest system-remote key wiht value... But I want system-remote key value appear multiple times...
Thanks alot
Rajeev

I am using customised...
Did you tried syndicating Remote key of that table or the field of the Qualifer table?
I am able to syndicate out with the system field and values.. But I want to syndicate out the multiple values wiht remote key of the table..
As mentioned Remote keys are AAA and BBB for System Sys1 and Sys2..
First I imported remote system table with Sys1 and Sys2 with remote Keys as AAA and BBB. then along wiht main table record I imported Sys1 and Sy2...
While Syndicating I want to syndicate AAA and BBB values along with Value field...
Suppose:
I have data :
MDM ID, RemoteSystem(System, Value)
111, ((Sys1,Val1),(Sys1,Val2),(Sys1,Val3),(Sys2,Val1))
Remote Keys for Sys1AAA and Sys2BBB
In the Syndication Manager I mapped as below: RemoteSystems RemoteKey and value are mapped to target...
RemoteSystem
--RemoteKey
System(DFNQ)
--Value(Qualifier)
I mapped RemoteKey and Value to the target fields.. Which is a XML output..
<REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val3</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
</REMOTE_SYSTEM>
Where I need the following Output:
<REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val2</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val3</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
</REMOTE_SYSTEM>
Any inputs.
Thanks
Rajeev

Clone XP system with CSA 6.0.2?

Similar Messages

Maybe you are looking for