Cloning WinXP onto Seagate Barracuda 7200.10 SATA hard disk

Greetings everybody!
I recently wanted to clone my existing (perfectly working) Windows XP Home boot hard disk onto a brand new 320 GB Seagate Barracuda 7200.10 SATA drive, model ST3320620AS. The existing boot C-disk is a 250 GB Western Digital SATA, which is in my Fujitsu Siemens Scaleo P (the CPU being an AMD Athlon 64 3700+). The motherboard is an ASUS A8NE-FM with the SATA interface being a NVIDIA nForce4 Serial ATA Controller.
I struggled quite a bit getting the cloned Seagate SATA disk to work as a Windows XP boot drive, but eventually got it working – using Acronis True Image Home version 9, build 3.854 (http://www.acronis.com/). Here’s how I eventually succeeded; hope it may be useful to others! ( - and I of course realize that ASUS motherboards are not made by MSI, but at the same time I have seen several MSI-users reporting similar difficulties…).
A small hint: You may download, at no cost, a full-functioning version of “Acronis True Image 10 Home”, usable for a 15 days trial period (http://www.acronis.com/homecomputing/download/trueimage/). If you can manage to clone your hard disk within this period, well, it’ll be completely free! A free Windows XP clone utility, which I don’t know how well functions, is XXclone, see http://xxclone.com/.
Here’s how I did (there may be other ways, but, well, this worked for me):
1) First mounted the Seagate ST3320620AS as the D-drive (the C-drive being the Western Digital boot drive). Kept Seagate factory-default jumper setting (“Limit data transfer rate to 1.5 Gbits per second “). Booted up, went into the BIOS (being Nvidia 42302e31 Phoenix AwardBIOS v6.00PG according to ”System Info for Windows” from http://www.gtopala.com/ ), and configured the Seagate drive as follows: Second Master SATA HDD, Extended IDE Drive: Auto, Access Mode: Large (NB: Do NOT select ”Auto” here!!), Capacity: 320 GB, Cylinder: 4095, Head: 240, Precomp: 0, Landing Zone: 65534, Sector: 255. Save configuration and exit BIOS.
2) Booted up on the old Western Digital C-drive. Used Seagate’s DiscWizard to format and partition the ST3320620AS (http://www.seagate.com/www/en-us/support/downloads/discwizard). The drive was formatted NTFS (4k block size, and one single partition). This went smooth (Windows XP however complained of some of the Seagate drivers not being ”WHQL certified” – just continued, anyway). Then right-clicked on ”My Computer" --> "Manage" --> ”Computer Management” --> ”Disk Management”. Right-clicked on the Seagate disk, then clicked ”Mark Partition as Active”. The Seagate drive is now seen in Windows as drive D, and is ready for use.
3) Ran Acronis True Image Home ver. 9, build 3.854 and cloned the Western Digital disk onto the Seagate. This went smooth and took less than five minutes (data amount on the Western Digital C-drive, containing Windows XP Home, \Program Files, \Documents and Settings and not much else, being approx. 10 GB). Impressing fast cloning! Exit and shut-down.
4) Removed the Western Digital drive from the PC, keeping only the new Seagate disk. Booted, went into BIOS, configured the boot drive as the Seagate: First or Second Master SATA HDD (according to what SATA cable is being used), Extended IDE Drive: Auto, Access Mode: Large (NB: Do NOT select ”Auto” here!!), Capacity: 320 GB, Cylinder: 4095, Head: 240, Precomp: 0, Landing Zone: 65534, Sector: 255. Save and exit BIOS.
5) Booted into Windows XP Home on the newly cloned Seagate SATA drive. Success!! End of story!
THANKS to several of ASUS forum users help!
Best regards,
Johan
Copenhagen
Denmark
NOTE the there seems to be an error in some of the ASUS motherboards (or in the BIOS?), incl. the A8NE-FM, which makes it impossible to boot from an apparently successfully Windows XP cloned Seagate SATA drive unless first having set the ”Access Mode” in the BIOS to ”Large” before formatting and cloning. Some also claim that NCQ for the Seagate drive must be disabled; I have not done this and the cloned drive boots and works perfectly with NCQ enabled. (NB: If not setting ”Access Mode” to ”Large”, but if keeping the default BIOS setting of ”Auto”, then it is perfectly possible to both format, partition, set active and clone onto the drive. When attempting to boot using the cloned drive one gets this message: ”Error loading operating system” (or in Danish: ”Fejl ved indlæsning af operativsystem”). Further links discussing this issue:
SATA boot problem: http://vip.asus.com/forum/view.aspx?id=20060822025446574&board_id=1&model=A8N-E&page=1&SLanguage=en-us
Cannot boot from SATA drive: http://vip.asus.com/forum/view.aspx?id=20061109224813953&board_id=1&model=A8N-E&page=1&SLanguage=en-us
Problem with installing XP on 320 GB HDD: http://vip.asus.com/forum/view.aspx?id=20060622193708298&board_id=1&model=A8N-E&page=1&SLanguage=en-us
Seagate SATAII disk unable to boot: http://vip.asus.com/forum/view.aspx?id=20060518000042851&board_id=1&model=A8N-E&page=1&SLanguage=en-us
A8N-E, SATA and XP Professional Installation: http://vip.asus.com/forum/view.aspx?id=20060327192440824&board_id=1&model=A8N-E&page=1&SLanguage=en-us

"NOTE the there seems to be an error in some of the ASUS motherboards (or in the BIOS?), incl. the A8NE-FM, which makes it impossible to boot from an apparently successfully Windows XP cloned Seagate SATA drive unless first having set the ”Access Mode” in the BIOS to ”Large” before formatting and cloning. Some also claim that NCQ for the Seagate drive must be disabled; I have not done this and the cloned drive boots and works perfectly with NCQ enabled. (NB: If not setting ”Access Mode” to ”Large”, but if keeping the default BIOS setting of ”Auto”, then it is perfectly possible to both format, partition, set active and clone onto the drive. When attempting to boot using the cloned drive one gets this message: ”Error loading operating system” (or in Danish: ”Fejl ved indlæsning af operativsystem”). Further links discussing this issue:"
that links are useless(for MSI owners), its described bug into BIOS which cannot determinate property HDD access mode. its specified problem related to this Asus board and specific BIOS version. exactly same problem happend and arrive with Gigabyte board after update BIOS to the latest one which suppose to fix "some things" and totally unexpected in background comes this issue..... seems some of Asus BIOSes got same issue...
MSI boards doesn't have this issue in any BIOS version.

Similar Messages

Seagate Barracuda 7200.8 Hard drive

In a Presario SR1817CL with Windows XP and 512MB memory, the Seagate 200GB 7200.8 hardrive is erratic, can't open desktop. Have a 500GB 7200.11 available to replace it. Will my PC support it and will I need any other changes?

Hibbs wrote:
In a Presario SR1817CL with Windows XP and 512MB memory, the Seagate 200GB 7200.8 hardrive is erratic, can't open desktop. Have a 500GB 7200.11 available to replace it. Will my PC support it and will I need any other changes?
The Presario is a desktop so a 500GB SATA hard drive should work..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Seagate Barracuda 7200.1 500GB 7200RPM S300 32MB

Will the:
Seagate Barracuda 7200.1 500GB 7200RPM S300 32MB
be compatible in my
2 x 2.66GHz Dual-Core Intel Xeon Mac Pro
I noticed that my machine has a Seagate Baraacude 250GB drive in so I assumed this would also work.
Do I need to purchase additional SATA cables or do these drives plug directly into the motherboard of the MacPro?

Yes, it will work. Installation information is in the Mac Pro User Guide manual that came with your computer. Page 38, I believe.

IMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

iMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

After doing a bit more research, the 2010 iMacs do appear to have a third cable connecting to the hard drive, for the internal temp sensor. This would appear to be the block of 8 pins that are on almost all drives, but they are normally intended for jumpers. Unfortunately I was unable to find any documentation or specs that would indicate this pin block connects to the internal temp sensor on either standard (non-Apple) WD Black or Seagate 7200.12 drives.
I did find some info that may be of some use:
WD: Where to connect an external temperature sensor to a Serial ATA or EIDE hard drive.iFixit: Replace the hard drive, how do I connect the hard drive thermal sensor?
Apple Technician Guide: iMac 2010 27" (mid-2010)
Various discussion threads I found through google searching indicated some people succeeded with installing an external temp sensor on the body of the drive.
Sorry I couldn't help more.

Seagate Barracuda 7200 160gb Won't Mount

I have a Seagate Barracuda 7200 160gb from a PowerMac G5. It spins up just fine. Sounds normal but is not mounting. I have used a Manhattan USB Dock, A Universal USB Drive Adapter. I had it mounted once externally and ran Disk Repair on it, and it still would not mount in the G5. I even took it to a local data recovery shop and they can't see it either. I've read a lot online about possibly replacing the PDB Circuit Board or the BIOS chip. I've also ran Disk Warrior - doesn't see it.
Is there a way to check what is actually the issue? BIOS, Board, Corrupted OS, etc.?
Tomorrow I'm calling Seagate to see if they can do anything. Basically I'm trying to get the data off of it for someone, then get a new drive and install then migrate assist if possible.
Thanks for any help

why would I need another drive.
To scavenge the board.
You can't just slap any old board on there.
The same model and the same firmware are the general requirements for board swaps to gain access to data....
Why would it need this?
The data rate limit is needed on retail drives to allow proper communication with the G5 controller.
The G5 controller and Seagate retail drives have a nasty history. One, the limit jumper is needed, but NCQ was enabled by default, and later, so was SSC. Neither of these features is compatible with the G5 controller.
It is the drive that was shipped with it when he bought it brand new from Apple.
Hmmm, my ESP wasn't working as well as it usually does.....
If the drive is OEM Apple shipped, then it has Apple firmware which changes jumper requirements.

MSI K8N Neo4-F + Seagate Barracuda 7200.7 120Gb PATA = PIO

If I have the two above components together, and enable DMA in the BIOS, the system won't boot. I have to disable DMA to get the system to boot, but then transfer speeds are excruciating!
Suggestions? Can't be a driver issue as I get this problem even before an OS is installed.
K8N Neo4-F (non SLI edition) [BIOS v1.6]
Athlon 64 3700+
PC3200 Crucial 1Gb (2x512Mb sticks in dual channel)
BFG 7800GT OC 256Mb
Creative X-Fi Fatality FPS
Seagate Barracuda 7200.7 120Gb (EIDE) [ST3120026A]
Seasonic S12 500W PSU
XP Pro

Bump

Stop the beeps with the 7200 rpm hard disks of the MacBook Pro

http://www.hardmac.com/news/2009/07/13/stop-the-beeps-with-the-7200-rpm-hard-dis ks-of-the-macbook-pro
Stop the beeps with the 7200 rpm hard disks of the MacBook Pro
from HardMac.com by [email protected] (Lionel)
At the beginning of week, we have spoken about the unpleasant beeps made by the 7200 rpm hard drive proposed as an option in the MacBook Pro 2009.
A solution has been found, the details are given by Rémy.
These tedious beeps occur when the disc is inactive and are caused by a system
to reposition the play-back head carried out in a repetitive way.
In addition to the beeps of the hard drive, Mac OS X displays the pretty multicoloured wheel during some seconds while waiting for hard drive to finish these loadings and unloadings of the play-back head.
The solution comes with a utility of the name hdapm (for Hard Disk Advanced Power Management) which makes it possible to change the level of energy management (APM) of the hard drive.
Hdapm can be downloaded from : http://mckinlay.net.nz/hdapm; hdapm being a command line utility, it is thus necessary to use the Terminal (which is in /Applications/Utilitaires).
After copying hdapm into your user file, the command to enter is:
sudo ~/hdapm disk0 max
disk0 corresponds to the disc to regulate knowing that hdapm should function with any ATA disk supporting APM
max is the level of APM which is a number ranging between 1 and 254 included
the word following are preset and can used in the place a number for the level of APM
max (maximum performance) is the parameter to use to eliminate the “beeps”.
min (maximum economy of energy)
default (returns to the default setting)
The level of APM is a temporary adjustment in the firmware of the hard drive, this adjustment is lost when the disk is powered down and it is thus necessary to redo this at each for each start up.
To install hdapm so it is launched at each start-up, it is necessary to copy hdapm to the hard drive (/usr/local/bin is advised) and to copy the file hdapm.plist in /Library/LaunchDaemons.
It will be can be necessary to you to edit hdapm.plist with the desired parameters; the default settings are: the repertory where hdapm is /usr/local/bin, the hard drive is regulated on the first (disk0) and the level of APM is the maximum.
You can simply copy the file hdapm into /usr/local/bin file if you want to avoid modifying Plist.
Simplest way to reach these files is to use the Go/go to the file and to copy/paste this address before validating.

Yeah, I don't buy that. I spoke with Seagate a couple of months ago when I was looking for the impossible to find 500 GB 7200 RPM HD and asked them that very thing. They told me it would work fine, but I should disable SMS. Apple told me the same thing. I ultimately waited and got a non G-Force model, but Seagate told me it would work.
I also don't believe that they'd OEM the drive to Apple knowing it wouldn't work. That makes absolutely no sense. If Seagate knew the G-Force drive would not function properly in an Apple MacBook/MacBook Pro, and they OEM'd it to Apple for that purpose anyway, what does that say about Seagate?
I admit it's odd that the used the G-Force model given the presence of SMS, but apparently Seagate has prioritized the manufacturing of the G-Force drives and probably offered it to Apple.

Can I install and use any 2.5" SATA hard disk on my Mac Mini (Late 2012)?

I have a Mac Mini (Late 2012) which is currently housing a 500GB SATA hard disk. Unfortunately read errors have been detected and it seems to be slowing down. I want to replace this with another 500GB SATA hard disk and I was wondering whether any notebook (2.5") hard disk would work or whether I have to look for one with specific specs (such as RPM, SATA version, etc).
Any help would be greatly appreciated.

Any 2 1/2 inch STA HD will work as long as the height is 9.5 mm or less. All most all meet this requirement except very larger capacity ones
I would opt for a SSD since those are a lot faster than a 2 1/2 HD and now they are very reasonably priced.
You can consider installing a second disk to using:
http://eshop.macsales.com/item/OWC/DIYIMM11D2/

Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          6 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Hardware UUID:          00000000-0000-1000-8000-0017F2059956

It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases.

SATA - Hard disk led

hi guys... i got 2 HD Sata / Ata. the problem is that when i use the SATA disk the hard disk led wont come up, but when i use the Ata one it does!!.. any ideas?¿
TIA

My IDE LED also works fine with a SATA hard disk, but I use only one SATA drive. A buddy told me that his LED does not work with SATA when he uses his drives as part of a RAID array, but it works only when he uses a single SATA drive. That may be the reason your LED isn't working if you are using dual SATA drives in a RAID configuration, or one SATA and one EIDE drive.

Seagate Barracuda 7200.11 or ES.2 for RAID 5

Hello all.
I've searched through past topics to avoid repetition, and my knowledge of RAID is somewhat limited. Nonetheless.....
I've purchased a Mac Pro 2x Quad Core for the audio company that I work for, and plan to fill up the hard drives with an extensive audio library which will be accessed via Logic Studio.
We are planning on purchasing a RAID card, using RAID 5 in order to stripe and mirror the drives.
The hard drives we are looking at are Seagate Barracuda 1TB drives, and I am struggling to determine which will be most appropriate.
Having researched around, it was suggested to me that the Seagate Barracuda ES.2 drives are more appropriate for using with a RAID card, although considering the increased cost compared to the 7200.11 drives [an extra £180), I'd like to find out is this is really necessary.
If any of you have any advice, suggestions, etc., I would be most grateful.
Louise.

If you are in an enterprise in which these drives will be in relatively continuous use, then it would be wise to purchase the ES enterprise models because they are intended for heavy enterprise usage. If all you do is an occasional backup to the RAID and the usage is light and the drives are not running 24/7, then you may do fine with the less expensive versions.
Here is some information and additional links to help you learn more about RAIDs.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison>.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

G5 Tower doesn't see SATA hard disks...a TOTAL mystery...

Hi All--
I was having some serious HD corruption & start-up problems with my 2 original HDs. 2 weeks ago, I bought a 1.5 TB Seagate internal Barracuda. Disk Util took a coupla tries to properly format & partition it, but I was finally able to create 5 HFS+ (Journaled) partitions. (At this stage, my goal was to create a new Boot Disk so I could run Disk Warrior on the corrupt drives since DU wasn't able to--bad b-tree Nodes--and also have a quick data-dump area in case the original HD got recognized, as it occasionally did).
At first, everything on the new Seagate (new Boot Drive) was fine. But...Disk Warrior locked up once while fixing permissions (and/or repairing the disk--I forget)...and my poor computer hasn't recognized any SATA drive since (new Seagate nor two original HDs. When I try to boot them I get broken folder icons, Prohibitory symbols, or the command-line errors superimposed on the gray startup screen (mach_kernel stuff?).
(One thing I noticed when I was booted from the OS X install disk was that the Log said that the 5 new ("now "unfindable") internal Seagate drive partitions were "inaccessible" becasue there was no Open Firmware path.) At one point, I also had to reconnect one of the HD's power connectors to the motherboard (near the PCI-X slots) since it came loose when I was installing/removing my Soundcard to test the sys w/o any peripherals. (A BIG bonk on the head to Apple for its ridiculously difficult PCI, RAM, and hard-disk mounting on the G5--just ask the stressed Motherboard PC board, the open/unprotected Hard Disk underbellies (and my skinned knuckles) about it.
Sorry for this next part which is WAY convoluted, but I want to be as specific as possible to see if I can get the help I need:
• The orig Superdrive (Sony, DW-Q28a) will ONLY boot and/or read my orig OS X install DVD. After some OS upgrade or another, about a year ago, it now spits ALL other CDs/DVDs out--so no booting from Disk Warrior or anything else. (I have an external USB DVD drive (Sony), but it is, or course, not bootable with a PPC.)
• Here's my MAJOR workaround to get some kind of working system: Bought a 1.5 TB USB Seagate Free Agent external HD. I unplugged the Superdrive (IDE) and plugged in a 4-year old IDE HD from my old G4 (running 10.3.9). I copied all data from my external LaCie Firewire HD to the FreeAgent. Unhooked the IDE HD, put the Superdrive back in & booted off the Install Disk. Erased/formatted/partitioned the LaCie FW HD and made it a boot drive. The FreeAgent is for data storage. (This is nutty as ****, though: my giant G5 tower is a giant motherboard for 2 external HDs...it's like Connecticut & New Jersey running an inaccessible New York City!)
• I bought Data Rescue 3 (still waiting for disk in the mail)--and just like DU & Disk Warrior, it doesn't even see the 2 SATA HDs.
. Replaced 3.6v PRAM battery.
• I have done every single "recommended" action: command-line fsck -y, "mac-boot", "reset-nvram", "set defaults", "reset-all". I have tried boot+Option, Single User Mode, Safe Mode, cmdOption+PR, shiftOption+CommandDel...you name it, I've done it.
Most of my data was backed up, but there are still a number of things I want off the 2 original HD's.
Can someone puh-LEASE help me? I have been tearing my hair out for 4 weeks, and my wife and kids miss me!
Thanks for bearing with me, and thanks in advance,
Nick

No you do more than everything, and more than enough. I was only saying WHY and the purpose behind 'zapping pram' thing. If the drive shows up in System Profile properly, and shows in Disk Utility as 1.5TB SEA.... you are done.
OF is my choice as quick, simple, and more thorough set of commands.
I worry about Seagate firmware. When they bought Maxtor, they seem to have lost their chef and chief cooks, that cook up firmware. Their SATA doesn't live up to their Cheetahs, that is for sure, and have had issues with iMac G5 firmware and Mac.
WD is very popular on Mac Pro, very much so, whether Black Caviars, 10K VelociRaptors, and most important: compatible.
Even on PCs, defrag tests show even current Barracudas takes much longer than any other make. And I've seen people try to zero their drives and take 10x longer (trouble with the small write I/O).

Can you a second Sata Hard Disk Drive in M Series?

Hello,
Can I install a second hard drive in M Series?
In particular I would like to install a Seagate Barracuda SATA 1TB drive.
I know it only has one bay, but I can house the disk in a separate case.
Thank you
Solved!
Go to Solution.

I believe it depends on the version of the m series you have.
on the m72e series (small form factor); there is only one 3.5" sata bay.
on the motherboard, there are 3 sata headers (cd drive/ hard drive + 1 other).
the way i did it was to order a silverstone dual 2.5 => 3.5" drive adapter that screwed into the drive slot (you have to be careful; not all drive adapters have bottom screw mounts).
This allowed me to put a 2.5" ssd and a 2.5" hard drive in the case.
otherwise, it would be pretty tight/impossible to squeeze in 2 full size 3.5" hard drives in the m72e

K8N Neo2 Platinum MB + SATA Hard Disks

Hi,
I would like to use some additional disk in my PC and therefore buy SATA disks.
The OS is WIN XP Pro and I want to keep my IDE configuration which is:
C:\ = IDE hard disk Primary Master
E:\ = IDE hard disk Prmary Slave
D:\ = DVD Secondary Master
F:\ = IDE hard disk secondary slave
and to this I want to add just as data storage SATA 300GB hard disks (¿ up to 4 ? is that possible ?)
regards Rainer

I am not familiar with K8N Neo2-F so consult your manual to confirm my answers to your questions:
1- "Is this also the case for the SATA connectors on the K8N Neo2-F ??" Highly likely since your motherboard is a stripped down version of the Neo2 Platinum.
2- "And do SATA 1&2 require different drivers than 3&4?" For normal SATA operation these SATA drives are respectively contol by your NF3 chipset and you Realtek chipset. When you install or update your Nvidia & Realtek driver package you install all that is required to run normal SATA operation. Should you decide to use a RAID configuration with your SATA drive then another RAID specific driver would have to be installed at system level.
3- "Also, is there a significant increase in performance when going from PATA to SATA on this series of mobos?" My answer does not take into account RAPTOR HDs which are in a super class of their own. Medium to High end latest PATA & first generation SATA HDs in the 7200 RPM class are promoted by their OEM as having respective top transfer speeds of 133 and 150 MB/s. Comparing my Seagate 120 gigs PATA HD to my other two Seagate 200 gigs SATA HDs is not very scientific since they are not all 200 Gigs. Therefore use discretion interpreting results.
a. PATA - Peak transfer = low eighties ; Steady Transfer = high sixties
b. SATA - Peak transfer = mid nineties ; Steady Transfer = low eighties
It has ben a while since I did these PATA/SATA test so I am working from memory only. One thing that however sticks in my mind is that the delta between my PATA & SATA drives, for peak and steady performance, was very close to 12 MB/s in favor of first generation SATA. Could this be possibly related to (150-133), I do not know for sure.
SATA II generation are now coming to market. These new generation SATA II drives will most likely widen the performance gap between them and older SATA I or PATA drive.
Take good care,

How to migrate win 8.1 from sata hard disk to ssd

I brought an Intel SSD 730 480GB 5GBs Sata 3
I also brought a RAID CARD SYBA| SYPEX40039 bootable. attached the ssd to that.
I like to migrate the Windows volume to the SSD.
but I have trouble to get the boot manager on to the ssd. despite not using uefi on the original install on the 1Tb drive. I can't use ghost. if I use ghost form the other partition(vista) I can clone partition but the 1TB is too huge to
for disk to disk cloning to ssd 480GB
Can I start w 8.1 DVD to do a repair on the ssd to get the boot manager to there?

Hi fs - ab,
Since third party clone software frequently cause system corruption and it’s not fixable, we only recommend two ways for system installation on new hard disk: performing a clean install or using windows system image restore and both ways need reactivate
Windows 7. And for system image restore, you can only do a system image recovery to a HDD or SSD that is the same size or larger than the one(s) included in the system image when it was created. You will not be able to do a system image recovery to a smaller
HDD/SSD. If the HDDs/SSDs are larger, then you will have "unallocated" space afterwards that is left over from the difference that you can extend into.
In that case, we VERY recommend you to perform a clean install for new hard disk.
Note: If you decide to use windows system image to restore your computer, you need to create a windows recovery disk (drive) for entry to Windows repair environment.
About windows recovery disk:
http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
Regards

Cloning WinXP onto Seagate Barracuda 7200.10 SATA hard disk

Similar Messages

Maybe you are looking for