Closing a partially order shopping cart

Hi,
How can user close a partially order shopping cart ?
I know the final invoice/delivery in PO level, I want to close in shopping cart level, so that no more PO will create against the shopping cart.
In detail:
User has created a Shopping cart with 20 quantiy. However purchase department created PO with 15 quantity against the shopping cart and both invoice/goods confirmation done against the PO. Now user does not want any PO to be created against the shopping cart and want to close the shopping cart.
Thanks,
Regards,
Jennifer

Hello Jennifer,
i guess purchase department created PO through Sourcing Cockpit.
So, Purchaser must use "Reject item" button for SC item concerned within Sourcing Cockpit.
In this way, SC item will be flagged as sourcing completed: Purchaser will not be able to create new PO item with reference to this SC item.
Regards.
Laurent.

Similar Messages

  • Limit Order Shopping cart

    Hi ALL
    In the limit Order Shopping Cart there are 2 values - Value Limt and Expected Value.
    -   I want to understand what is the significance of each of this for business
    -   What will the limit PO value be - Value Limit or the Expected value?
    -   On what basis will the workflow be trigerred?
    -   Which value will only be available for internal viewing purpose?
    I have been through the below forum discussion but is not of much help
    http://forums.sdn.sap.com/thread.jspa?threadID=1648976
    Thanks in Advance
    Regards
    Manoj

    Hi
    I want to understand what is the significance of each of this for business
    Ans:
    ■Limit items
    ■You can process the value limit (maximum purchase order value that goods or services must not exceed) and the expected value (estimated value of the purchaser, either under or the same as the value limit).
    Purpose of Expected value
    The expected value serves to update the commitment in Controlling and the budget is reduced by this amount.
    ■You can spread the value limit over partial limits (contract limits and remaining limits) or establish an undefined value limit. The sum of the contract limits created may be greater than the value limit. The system checks and ensures that the value of the ordered items is not greater than the value limit.
    ■You can assign the relevant product category and define the period in which the goods should be delivered or the service performed.
    Note
    If you do not specify a value limit or a remaining limit, the system designates the remaining limit by default as unlimited.
    Definition of limit
    limit item (SRM) 
    An ordered item that is assigned an upper value rather than a price.
    For example, if a service needs to be performed but the exact price is unknown, you can order it as a limit item and assign an upper limit to the amount that it can cost.
    - What will the limit PO value be - Value Limit or the Expected value?
    It is on the Value limit
    - On what basis will the workflow be trigerred?
    Vaue limit
    Regards
    G.Ganesh Kumar

  • Update Requestor and Goods Recipient in Purchase Order/Shopping Cart

    Hello guys,
    we have created a Z program that transfers objects Purchase Order/Shopping Cart from one user to another.
    In our Z program we transfer the CRMD_PARTNER-PARTNER_NO, ADDR_NR and ADDR_NP from the old user to the new user.
    Also in CRMD_ORDERADM_H and CRMD_ORDERADM_I we change the field CREATED_BY from the old user to the new user.
    The problem we have seen is that in header position in SRM portal we see the old user in Requestor and Goods Recipient, and in table CRMD_PARTNER the PARTNER_NO is the new user, Another strange thing is that if we see detailed position of the Purchase Order we see the new user in Requestor and in Good Recipient.
    In resume, we see different things in position that in header. Could it be possible? We are doing wrong the update?
    Many thanks in advance.
    Regards,
    Xavier.

    Hello Xavier,
    If partner "Requester" and/or "Goods Recipient" is different between PO items and there was previously a "Requester" and/or a "Goods Recipient" at PO header, after your update, partner at header level should have field CRMD_PARTNER-DISABLED set: "Requester" and /or "Goods Recipient" is active at header level only if the same partner is populated for all PO items.
    Concerning SC, there is no "Requester" and/or "Goods Recipient" at header level.
    Be that as it may, if you use function modules BBP_PD_PO_UPDATE,  BBP_PD_PO_SAVE and BAPI_TRANSACTION_COMMIT, modifications will be OK (do not forget to not populate table I_PARTNER for partner at header level if partners are different at item level).
    Regards.
    Laurent.

  • Limit Order Shopping Cart issue

    Hi SRM Gurus,
    I have some issue regarding Limit Order SC.
    Currenty I am using SRM 4.0 and doing the Limit Order SC.
    The Limit Order SC has been created successfully in SRM and the PO is also getting populated in ECC.
    But the problem is like,
    When we create Limit Order(blanket) Shopping cart, then there has 2 options to do that.
    (Under Follow-Up Action)
    1. Confirmation and invoice
    2. Invoice Only.
    Depending on the above in ECC, the Item category for the PO will be D(Confirmation and Invoice only)and B (Invoice Only).
    But for my case it's always showing Item Category D in both of the cases.So as because of this issue, some thing is going wrong from ECC perspective.
    So please help me out from this problem.
    Thnaks for your help in advance.
    Full points for the answer.
    Thanks again,
    Shraman

    Hi Shraman,
    We would like to start using limit shopping cart, but do not know how to implement this.
    Can you enlighten me in regards to this?
    Can you do it without using extended classic scenario?
    I have the option in the shop on behalf but not in normal shopping
    Thanks in advance,
    Thomas

  • How to change delivery address of limit order shopping carts?

    I created and hold a limit sc. Afterwards I wanted to change the delivery address of the position by starting 'status check' and update sc.
    I cannot find a tab with delivery address according to the screens of 'wizard'.
    I get only the display of preferences for new shoppinc cart lines.
    We have SRM 5.5 Server and ECS.
    Can anyone help me?
    Regards Joe
    Edited by: Joe on Oct 16, 2008 5:35 PM

    Hi Joe,
    Did you try to do via default ADDR_SHIPT address atribute? so this default values applicable to your limit sc also.I agree Joe. you are absolutely  correct . There is no ship to address / location folder  to change the delivery address in limit shopping card. We can not see ship to address folder in limit sc.
    DEFAULT SETTINGS FOR ITEMS HAS SHIPT TO ADDRESS so you could not see.
    regards
    Muthu

  • Limit Order Shopping Cart Invoice posting issue

    Hello Experts,
    I am not able to post invoice for LIMIT ORDER SC(I am using Extended classic scenario); using MIRO when i enter PO no. in the specified field ; in the line item both the amount & quantity appears as zero. and it does not allow to change or edit. Ideally it should allow the posting of invoice but with block payment.
    The same thing i tried for "Describe requirement SC" and it allowed me for posting invoice even without GR/Confirmation.

    Hi,
    You can enter the Invoice, remove the GR/IR based invoice indicator from the invoice tab of the PO line item.
    thanks
    Padhi

  • FM for approver list BEFORE shopping cart is ordered?  DOC_CHECK_BADI

    Is there a function module that can be called from DOC_CHECK_BADI to return the approver list as it shows in the approval preview?  This will be before any workflow is created, since the shopping cart has not been ordered yet.

    Hello,
    Definitly not an easy thing to do.
    You have to consider at least 3 cases:
    - No workflow instance nor buffered (SC creation, approval preview not called)
    - Buffered workflow (approval preview has been called)
    - Wf instance exist (Hold or ordered Shopping cart).
    In all cases the function BBP_PDH_WFL_APPROVAL_SIMULATE will give you the correct information if you call it with the correct parameters.
    I think you already check the form simulate_approval_pbo of fg bbp_pdh_wfl. You should try to reproduce this logic and need to retrieve first some global variable from this program (gv_buffer_wfdkey, gv_check_status, etc.) with memory import/export of dynamic call (if possible).
    Rgds,
    Pierre

  • What operation result SC status'  I1106 Shopping cart ordered'

    we use  SRM7.0 in standalone scenario.
    today we found that one SC status'I1106 Shopping cart ordered' appeared.
    i don't know , what makes this status appeared .
    regards
       claud

    Hi Claud,
    The SC status changes as shown
    I1015 (awaiting approval)-> I1021 (created)-> I1038 (complete)-> I1106  (ordered)-> I1129 (approved)-> I1111 (in transfer)-> I1113 (follow on document is created.)
    So once you click on 'order shopping cart', its status changes to  I1106  (ordered)
    Regards,
    Nikhil

  • BAPI which creates a PO from Shopping cart

    Hello All,
    Irrespective of any scenario, How is that the PO is getting created out of an ordered shopping cart? Is it a BAPI, if so, where can we see this ? I mean which trans code should we use  in the GUI?
    Thanks in advance,
    Nagarajan

    Hi
    <b>Please go through the related pointers -></b>
    Re: How the Order is created in R3?
    Re: Regarding direct material procurement in Classic scenario.
    DATA VALIDATION INSIDE  BAPI_PO_CREATE / BAPI_PO_CREATE1
    Re: How do debug BBP_ECS_PO_OUT_BADI?
    Re: BAPI_PO_CREATE1
    Re: bbp_pd_po_transfer_exec
    <u>Do let me know.</u>
    Regards
    - Atul

  • Shopping cart Awaiting approval

    We are using SRM6.0. We have activated the WF10000060.
    On ordering shopping cart get the status "Awaiting Approval".
    On checking the status of the Shopping cart in SWI6..we see lot of errors in workflow log undrr steps history.
    1. (Sub)workflow created - No Errors
    2. Work Item Submitted for Execution - No Errors
    3. Exception occurred - Error when starting work item 000000065623
    4. PROCESS_NODE -
    Error when processing node '0000000007' (ParForEach index 000000)
    5. CREATE - Error when creating a component of type 'Step'
    6. CREATE_WIM_HANDLE - Error when creating a work item
    7. CREATE_VIA_WFM - Error within method CL_SWF_RUN_WIM_FACTORY->CREATE_VIA_WFM
    8. GET_WITYPE -  Unable to determine work item type for step at node 0000000007
    9. GET_TASK_HANDLE - Error when loading task WS10000049
    10.FIND_BY_WFDWIZ - Workflow definition of task 'WS10000049' cannot be activated
    11. Error Message Created for Admin - No errors
    12. Executing flow work item - Work item 000000065623: Object FLOWITEM method EXECUTE cannot be executed
    13. Executing flow work item- Error when processing node '0000000007' (ParForEach index 000000)
    14. Work Item Submitted for Execution - No errors
    Under Messages tab we have error message: Error when processing node '0000000007' (ParForEach index 000000).
    The above errors are similar even when we activate other work flows of shopping carts.
    It looks

    SAP Note 962488 requests for the SWD_WFD_REPLICATE_FROM_9999 function module teo be executed. However did not solve the problem.
    Also note 981295 was verified and is not for our problem.
    Any better answer?
    Vasu

  • Shopping Cart approval process in SRM using Black Berry

    Hi,
    I am very new to SRM. Here the user wants the whole approval/rejection process of shopping cart should be done via the Black Berry.
    When a shopping cart is created in SRM then automatically a mail should appear in this mail box(outlook or lotus) as well as in the black berry mail box, so from black berry the user will accept/reject the shopping cart.
    What workflow should be used? for mailing to outlook as well as in the blackberry whether we should implement any BAdI and also for integrating SRM & black berry whether we require any plug-in or configuration to be done..
    Please do the needful..
    Thanks and Regards,
    Chandra Sekhar

    Hi,
    pl. read this:
    Mobile Enterprise Buyer
    Use
    Users can log on to the Enterprise Buyer system using a WAP-enabled cellular phone or any other WAP-enabled front end. This allows them to perform many procurement tasks completely independently of any docking station. These mobile applications are part of the standard system setup for Enterprise Buyer.
    Managers can approve shopping carts while on business trips far away from the office.
    The start URL for the mobile scenarios is:
    http://.:/scripts/wgate/wapbbpstart/!?~language=
    where <language> = de or <language> = en, for example.
    The initial screen is displayed in the relevant language.
    Integration
    You can either use your own WAP gateway or you can use a WAP gateway service from a telecommunications provider. If you have your own gateway, you can position it behind your firewall. This means that communication is via a dialup line as far as the WAP gateway, that is, a secure connection going behind the firewall. Beyond this point, communication is via HTTP. If you are using a WAP gateway service, the dialup line stops outside your firewall with the less secure HTTP communication starting outside the firewall.
    The graphic shows a standard configuration with a WAP gateway located behind the firewall.
    Prerequisites
    You require the following:
    WAP-enabled mobile device
    WAP gateway
    WML-enabled catalog that supports OCI
    You have configured your Web server to handle the MIME (Multipurpose Internet Mail Extensions) types required for WAP. These are as follows:
    File extension
    MIME type
    Wml
    text/vnd.wap.wml
    Wmlc
    Application/vnd.wap.wmlc
    Wmls
    text/vnd.wap.wmlscript
    Wmlsc
    Application/vnd.wap.wmlscriptc
    Wbmp
    image/vnd.wap.wbmp
    If you have your own Web server, you define the MIME types using the Web server's administration tools. In Microsoft IIS, you have to enter the types on the Properties page of your site on the tab card HTTP Headers. If you are not using your own Web server, inform the administrator or provider running the Web server.
    Features
    The following functions are available:
    Create new shopping cart
    Users can:
    Select catalogs using input help
    View catalogs (by product group)
    Search for products in catalogs (full text)
    Display item details
    Add items to shopping carts
    Delete items from shopping carts
    Change item quantities
    Delete shopping carts
    Order shopping carts
    When a shopping cart is ordered, an order confirmation is displayed giving the shopping cart name and the total value of the shopping cart.
    Status check
    Users can:
    Display overview of shopping carts (shopping cart name and status)
    Display header data for shopping carts (for example, shopping cart name and date of last change)
    Inbox
    Users can:
    Display overview of work items (only shopping cart approval) and messages
    Display detail view of messages (sender and full short text)
    Display detail view of work items (full short text only)
    Managers can approve or reject shopping carts
    Managers can only approve or reject complete shopping carts. Approval and rejection at item level is not possible.
    Reporting
    Managers can display the most recent purchase orders created for their cost center(s).
    to get presentable doc mail me on
    [email protected]
    BR
    Dinesh
    <b>Reward if helps</b>

  • Creation of shopping cart

    Hi all,
      I have the following queries
      Could any one explain me in detail the step-by-procedure for creating a  shopping cart .
      what are the prerequisites for creating the shopping cart
      whether we have to create shopping cart in sap transaction or thriough web server
    Thanks in advance.
    S.Jenibalet.

    Hi
    <b>User Roles in Enterprise Buyer</b>
    <u>Employee</u>
    Employees are responsible for the procurement of the goods and services that they need for their work area. To do this, they search for suitable products in electronic catalogs and order them. They can check the procurement status at any time.
    Once the goods have been delivered or the service has been performed, they can create a confirmation. Afterwards, they can create the invoice for their purchase order.
    Manager
    Activities
    Managers are responsible for various approvals that are necessary in the approval process. This includes, for example, the approval of:
    User master records requested by employees in the manager's organizational unit
    Shopping carts created by employees in the manager's organizational unit
    Settlements for procurement cards that are assigned to employees in the manager's organizational unit
    Secretary, Office Assistant
    Activities
    Secretaries can define templates for recurring procurement processes. Employees can then use them when creating shopping carts.
    Secretaries can confirm goods receipts or service entry sheets centrally for the employees in their department. Afterwards, they can create the invoice for the purchase orders that belong to it.
    Purchaser
    Activities
    Professional purchasers are responsible for processing and issuing purchase orders in Enterprise Buyer. If the requester creates a shopping cart with incomplete data (for example, the vendor is missing for an item), purchasers receive the incomplete purchase order in their worklist. They can complete the data and send the purchase order to the vendor.
    Creating public and restricted bid invitations and comparing received bids also belongs to this work area.
    Purchasers can define templates for recurring procurement processes, which employees can then use when they create shopping carts.
    Purchasers are also responsible for processing the purchasing data in the business partner master records.
    Administrator
    Activities
    Administrators are responsible for setting up and monitoring the Enterprise Buyer system. They are responsible for analyzing and solving problems that occur in the system itself, in the interfaces to the back-end system, and in the applications. System administrators also manage user master records for internal employees and external business partners.
    Vendor
    Activities
    Goods and services are procured from vendors. In Enterprise Buyer, vendors can confirm that they have delivered goods or performed services. They can also create invoices for their purchase orders.
    Vendors can submit bids against bid invitations and reverse auctions.
    <b>Three options for adding an item to a shopping cart:</b>
    1)Catalog: the catalog is able to supply the product ID, product text, product category, price, vendor and other data. It can be displayed in a separate window or inframe.
    2)Special Request: it can either be entered a text description or a product number
    3)Favorites: Single items, personal templates, public templates, ordered shopping carts
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Hi controlling area and shopping cart

    Hi SRM gurus,
    Can anybody suggest us for the following error for SRM 5.0 decoupled scenario.
    1)  When we try to create a shopping cart from our development server and in step 3 when we click "Add to Shopping Cart " a popup shootsup which asks for the "Controlling Area".
    2) When we give controlling area it goes in and creates a shopping cart. But that shopping cart is not visible in the webportal where in "Check status" this number is skipped. The steps followed in SAPGUI are :
    BBPSC02,
    Describe Requirements,
    Add to Shopping cart,
    Give controlling area,
    Continue,
    Complete and Order &
    Shopping cart.
    The same requirement doesnt arise in the sandbox client.
    May I know what could be the reason for the same from any of the experts from this forum.
    Sincerely,
    Sridhar.

    Hiiiiiiiiiiii alllllllllllllll,
    Does anyone able to give suggestion of the issue.
    Sridhar.

  • How to delete shopping carts from Favourites(EBP)

    Hi,
    Could any one help me ASAP .
    I have a problem that a user is using EBP since 2.5 years and all the shopping carts that she orderd filled up in Favorites(under my Ordered shoppingcarts).
    So when she is ordering from Favourites(My Order shoppingcarts) ,the shopping cart is not showing in Order Status.
    So how to delete my ordered shopping carts from Favourites.Please advice me asap because this is a Production issue
    Message was edited by: Sreenivasa Reddy

    HI Mani,
    The problem is not in viewing the shopping carts orderd more than one year, i can view all the shopping carts ordered in favorites(since 2004).
    The Problem is:
    If user follow the path to create shopping cart:Reuisitioning-shop-Special Request- enter text-order-then shopping cart showing in order status(there is no problem )
    But, if user follow the path:Reuisitioning-shop-Favorites-My Ordered Shopping cart-Add to shopping cart-order-then this created shopping cart is not showing in Order status(i mean cart is not getting saved, there is no number also).Is there any thing that after filled up some number of shopping carts in favorites, we cannot follow this path?
    I think now the problem is clear, could you please advice me

  • Close a shopping cart having partial delivery

    Hi,
    How can I close a shopping cart which is partially delivered ?
    Ex: I have mentioned quantiy 100 PC in shopping cart, a received 70 PC and invoice 70 PC against the shopping cart purchase order. As we don't expect any more material to be received against the shopping cart, i would like to close the shopping cart.
    How can I achive the above ?
    Thanks in advance.
    Regards,
    Jennifer

    Hi Jennifer,
    1. If the shoppgin carte is created and is waiting for approval
    Option is: Reject the Shoppoing via approval / or you can delete the shopping cart from check status if you are the requister
    2. If the shopping cart is approved
        A. In case the porduct category is sourcing relevant then in sourcing buyer can selecting complegted indicator without  assigning source of supply. Then automatically SC will goes to completed status without any follow on document
       B. In case if the cart is from catalog / source is assigned then PO will be created automatically once the SC is approved. Buyer can delete the PO then sytem will allow you to deleted the SC from checkc status.
    regards,
    krish

Maybe you are looking for