Cloudscape Kills Windows 2000

I have installed J2EE SDK 1.3 beta 2, and was going along well until I reached the Dukes Bank sample application.
I have gone through step by step as stated in the tutorial, using ant to compile everything. I use the deploytool to open the resulting DukesBankApp.ear file and everything looks fine. I then attempt to deploy the application, set that going, and watch as the progress window appears. The messages displayed get to (I believe) "Making Server JARs", and then the system reboots. I've uninstalled and reinstalled everything, recompiled from scratch, and it still does it.
So I thought I'd go on a different tack to test out the database features. I ran the cloudscape server with "cloudscape -start", and then tried to connect to it with "cloudscape -isql". And it happens again - reboot.
I have Windows 2000 Pro (SP2), IE5.5, 384Mb RAM, J2EE 1.3 beta 2. Any thoughts on where to go next with this problem?
Thanks.

in my experiance the problem is not because of cloudscape, the same problem might happen in another database too...
in windows 2000 it shows some collition between java runtime environment.
This same problem may occure in any java installation of windows2000 in ur system. better try to reinstall java and set clear class path...
that means in dos prompt set classpath=new classpath then try to run cludscape, same should for j2ee, and deploytool in the same prompt.
( can u check what are the paths available in ur system by set | more command in ur system dos prompt )
can u inform me after u solving this problem....
i will try my level best to find out a solution
[email protected]

Similar Messages

ITunes/Quicktime killes my Windows 2000 SP4

After installing recent iTunes/Quicktime for Windows I am not able to boot my PC with Windows 2000 SP4. I can't reboot in save mode neighter - nothing goes.
Never saw a software which crashes your OS - I can't believe that!
What to do now? Don't tell me to re-install Windows 2000.
Thanks.

I had the exact problem on two of my Dell Dimension running Win 2000. I had to painfully re-install everything. Did you fix yours?

Error 1053 the oracle(8.1.6) service is not starting on a fresh windows 2000 install

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion.

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion. This is what I did to start the oracle service..
1. Change the startup type to manual in the windows service panel
2. Restart the Windows 2000 PC
3. Start the Oracle service by clicking the start button in the services window.
4. It will hit the same error ie 1053..
5. Now kill the oracle process using windows Task Manager
6 Once again go back to services window and click the start button
7. It will show the status meter window with a close button..
8. After the status meter crosses halfway hit the close button..
9. Your oracle process is started now..

Windows 2000 connector Patch issue (Patch ID: 8318738)

Hi,
We have applied the latest Windows 2000 connector Patch on our DEV environment.
While trying to provision the Windows resource (the user’s home network shared folder), effectively there is some permissions issue that is encountered while executing in the DLL and it effectively causes some page fault that prompts the OS to kill the process and the OC4J instance is restarted.
FYI..
10/01/11 01:26:17 Running GETUSERANDPERMISSIONS
10/01/11 01:26:17 Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
10/01/11 01:26:17 Running GETGRANTUSERPERMISSIONS
10/01/11 01:26:17 Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
10/01/11 01:26:17 Running GETPERMCOMMANDANDFOLDERPATH
10/01/11 01:26:17 Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
10/01/11 01:26:17 Running GETFULLGRANTUSERSHARECOMMAND
10/01/11 01:26:17 Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
10/01/11 01:26:17 Running EXECUTEGRANTUSERFOLDERPERMISSIONSCOMMAND
10/01/11 01:26:17 Target Class = com.thortech.xl.integration.WindowsNT40.tcUtilWindowsNT40
Entering method runRemoteCommand
szAdminName is =:OIMADMIN
szDomainName is =:dev.abc.com
szCommand is =:cmd /c cacls %home%\user70065 /E /P User70065:C 2>C:\WINDOWS\system32\windowsConnectorError.txt
temp is \\hou016.dev.abc.com\root\cimv2
connecting to server
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x695befe7, pid=2212, tid=4184
# Java VM: Java HotSpot(TM) Server VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# C [tcWindowsNT40.dll+0x1efe7]
# An error report file with more information is saved as hs_err_pid2212.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
10/01/11 01:26:20 Start process
WARNING: Code-source D:\product\OASDev_2\j2ee\halOIM\applications\Xellerate\soap.jar (from manifest of /D:/product/OASDev_2/j2ee/halOIM/applications/Xellerate/xlGenConnector.jar) has the same filename but is not identical to /D:/product/OASDev_2/webservices/lib/soap.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\OASDev_2\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader Xellerate.root:0.0.0.
WARNING: Code-source D:\product\OASDev_2\j2ee\halOIM\applications\Xellerate\http_client.jar (from manifest of /D:/product/OASDev_2/j2ee/halOIM/applications/Xellerate/xlGenConnector.jar) has the same filename but is not identical to /D:/product/OASDev_2/j2ee/home/lib/http_client.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\OASDev_2\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader Xellerate.root:0.0.0.
WARNING: Code-source D:\product\OASDev_2\j2ee\halOIM\applications\Xellerate\xlWebApp\WEB-INF\lib\share.jar (from WEB-INF/lib/ directory in D:\product\OASDev_2\j2ee\halOIM\applications\Xellerate\xlWebApp\WEB-INF\lib) has the same filename but is not identical to /D:/product/OASDev_2/jlib/share.jar (from <code-source> in /D:/product/OASDev_2/j2ee/halOIM/config/server.xml). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader Xellerate.web.xlWebApp:0.0.0.
10/01/11 01:26:38
GMS: address is HOUOIM602V:4079
WARNING: Code-source D:\product\OASDev_2\j2ee\halOIM\applications\Xellerate\xlScheduler\WEB-INF\lib\xlScheduler.jar (from WEB-INF/lib/ directory in D:\product\OASDev_2\j2ee\halOIM\applications\Xellerate\xlScheduler\WEB-INF\lib) has the same filename but is not identical to /D:/product/OASDev_2/j2ee/halOIM/applications/Xellerate/xlScheduler.jar (from manifest of /D:/product/OASDev_2/j2ee/halOIM/applications/Xellerate/xlDataObjectBeans.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader Xellerate.web.xlScheduler:0.0.0.
10/01/11 01:26:42 Loading xalan.jar for XPathAPI.
10/01/11 01:26:43 Nexaweb Technologies Inc.(C)2000-2004. All Rights Reserved.
10/01/11 01:26:43 Nexaweb Technologies Inc.
10/01/11 01:26:43 10 Canal Park
10/01/11 01:26:43 Cambridge, MA 02141
Any one of you faced a similar issue if you also happend to apply this patch? Please suggest if you interpret any other issue from the logs.
Thanks in advance.

Guys,
Any Help on this Issue?

Problem Starting WLS 5.1 from windows 2000 program group

Hi
I couldn't able to start Weblogic server 5.1 from windows 2000 program
group(start > Programs > Weblogic 5.10 > Weblogic Server). I can start WLS
without any problem from the console . I've check every configuration and
environment setting, the problem still come out. Whenever I start WLS from
program group , a window dialog with error messages will come out , here's
the error messages :
wlserver.exe - Application Error
The instruction at "0x04d5d0d6" referenced memory at
"0x00000000". The memory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
Any suggestions/solution will be appreciated .
Thanks
Chew Leong
[email protected]

look for weblogic.system.password property in your weblogic.properties
file and see what's in there.
Shailesh Mungikar wrote:
I am trying to install WLS 5.1 SP12 on my Windows 2000 machine.
I have WLS 6.1 already installed my PC.
When I try to install, at the very end when
"System" password required
dialog pops up, I get another dialog box saying
WLPASS~1.exe Application Error
The exception Floating point division by zero (0xc000008e) occured in
the application at location 0x50147c14
When I press OK, it kill the "System password" dialog.
The installation seems to be complete.
If I go ahead and try to start weblogic, I get Exceptio
java.security.AccessControlException: access denied
(java.lang.RuntimePermission createSecurityManager)
Any solution/workaround?
thanks,
_shailesh

Running Essbase 6.1 as a service on Windows 2000

OK, what's the scoop about running Essbase 6.1 as a service on Windows 2000?Besides not seeing the graphic interface, are there any issues? Are there any issues with shutting down the Essbase server by either clicking "Stop" in the Services panel or issuing a Net Stop service command?Finally, has anyone successfully used Microsoft's "Srvany" utility to run Essbase as a service yet still display the graphic windows?Do most of y'all on NT or 2000 run as a service or as an app?

Just a little extra information about running Essbase as a Service. We are running on NT 4.0. If one application is causing a problem, you can kill the one application without having to reboot the server. You will need to know which application is causing your problem and You will need to know it's "process id". If you can't find the right process id by looking at "tlist", you can look in the ESSBASE.LOG. Start at the bottom of the log and search backwards for the text "started with process id". When you find the process id of the problem application, you can then kill it at the DOS prompt by typing "kill ###", where ### is the process id.This is helpful for us because we have about 10 applications on one server and we don't want to have to take all of Essbase down just for one application. Hope this is helpful to someone.

Error starting the 9iAS installer on Windows 2000 on P4 laptop

I am having problem running 9iAS Installer on my P4 Laptop.
any solution?

Hi
I have successfully installed Oracle products in P4 hardware configuration and there is a know bug in Oracle & P4. Follow these steps below and I am sure that you will be successful in installing Oracle on P4.
Background:
When installing and configuring Oracle 8i to support a Syllabus Plus timetabling application on a Pentium 4 Server with Windows 2000 Advance Server, the following issues were encountered:
1.     The Oracle 8i Universal Installer (OUI) aborts without notice
2.     When installed using either the Oracle 9i OUI or the patched 8i OUI downloaded from Oracle Corporation, errors occurred during installation and java based configuration tools such as the Database Configuration Assistant and the Network Configuration Assistant would not run.
Problem Causes
Oracle Corporation have documented the following known issues:
1.     The OUI 8.1.x fails to recognize the P4 processor and aborts without notice.
2.     The OUI 8.1.x or above has problems on machines that use the Sun JRE and Symantec JIT. Windows 2000 (all versions) and Netware platforms are affected by this.
Work Around
The following work around has been used successfully at the Northern Territory University to overcome these problems.
     1.     Install Oracle 9i patched installer available from Oracle Technology Network website on the machine running on Pentium 4 Processor.
     2.     After installing Oracle Universal Installer, open file oraparam.ini and make the following modifications: (Assuming CD-ROM Drive is d: and you are installing Oracle from CD-ROM)
     a.     Change the Source= line to use the full path to the CD instead of relative path. (i.e. Source=d:\stage\products.jar)
     b.     Change the JRE_Location line to use the full path to the CD instead of relative path. (i.e. JRE_Location=d:\stage\components\oracle\swd\jre\1.1.7\1\datafiles\expanded)
     c.     Change the OUI_Location line to use the full path to the C drive (where the installer is installed) instead of relative path. (i.e. JRE_Location=c:\stage\components\oracle\swd\oui\1.6.0.9.0\1\datafiles\expanded)
     d.     Change the JRE_MEMORY_OPTIONS line to add -nojit as the first argument. (i.e. JRE_MEMORY_OPTIONS=-nojit ms16m ms32m) Other entries should remain same.
     3.     Launch OUI and this will use the modified oraparam.ini file and pick up the information from the CD-ROM. (since the absolute locations are specified)
     4.     Choose the custom install and choose not to create the database during the install. This way, the DBCA will not be launched during installation.
5.     The Net8 Configuration assistant will still be launched and there is no way to suppress it. If you need to kill it due to installer hanging then in the configuration tools window highlight the Net8 Configuration Assistant and click Stop. If this does not work then look for the most recent JRE process using task manager and kill it manually. Note: The OUI itself will also have a jre process. Make sure to kill the only the most recent process.
6.     After killing the configuration tool, continue through the installation to the End of Installation screen. We can modify the configuration tool to use this option nojit.
     7.     Once installation is complete, each of the following files in the ORACLE_HOME needs to be modified:
Each file will contain a command similar to the one following, which should be modified to include the option -nojit.
Eg: Command=(c:\program files\oracle\jre\1.1.7\bin\jrew nojit classpath.
     a.     assistants\dbca\dbassist.cl
     b.     assistants\dbma\dbmig.cl
     c.     assistants\ifa\ifa.cl
     d.     bin\owm.cl
     e.     ldap\oidamdin\oidadmin.cl
     f.     network\tools\netasst.cl
     g.     network\tools\netca.cl
     h.     owm\install\instelogin.cl
     i.     owm\install\instowm.cl
This (-nojit) is the only modification required to enable the configuration tools. After these changes the configuration tools like Net8CA and DBCA can be launched from the start menu.
Note: if your Oracle server is already installed and running but configuration tools are not running then just edit these files mentioned above (from a to i) and then launched configuration tools, they all will work.
Thank you
Amit

Migrating Users and Groups from Windows 2000 server to Windows 2013 Standard.

OK...let me see if I can get this question out the way I need to....
I inherited a Windows 2000 Server that's on it's last legs. We have a new server, a Windows 2013 Standard machine that we just recently purchased. I need to migrate the users and groups over to the new server, but there are two things that are
making it difficult:
The 2000 machine is NOT a Domain Controller
The 2000 machine is NOT running Active Directory
This is a file server that hangs onto another network of which I have no control of. It has its' own IP address and there is NO WAY we can run Active Directory or make it a domain controller.
I have close to 300 users, groups, and printers to bring over to the new server. Rather than kill myself doing manual input, is there any other way to do this?

Hi,
When you import the CSV file to new server, you need to create a new user account then import the CSV.
http://blogs.technet.com/b/heyscriptingguy/archive/2014/10/01/use-powershell-to-create-local-users.aspx
If you have any issue, i suggest you could ask in PowerShell forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Oracle stability on Windows 2000 and Windows 2003

Hello everyone,
since the beginning of my career in the database world (5 years ago), I work in a company where the operating system we are using is windows.
Since the beginning, we are shutting down and restarting every database server (including the OS) on a weekly basis to ensure stability I suppose.
My question is:
Is it still a "good practice" to do that (restarting every database server)? On windows 2000? On windows 2003?
If it is still a "good practice", should it be done on a weekly basis or more on a monthly basis?
Thank's for any input on this open question.
Best regards,
Carl

I ran a 9i RAC on Win2K3 for over 16 months and only periodic reboots for maintenance (OS patches). I had a scheduled time each month (4 hours) to shutdown, take a cold backup, patch the OS, and get everything back up in time for production. This seemed to work just fine. I would caution not to upgrade all your nodes with the OS patches at the same time, however. Leapfrog them so a single bad patch doesn't kill your entire DB.

Installation problem on windows 2000

Hi,
Please help!
I've been tring to install oracle on windows 2000 machine unsuccessfully. the setup program aborted without error message. I've tried many versions of oracle database, 8.1.7 all editions, 8.1.6ee, 9iAS. the only message error I got when 9iAS failed to install (iSetup.exe). the problem seems to be with the java runtime environment. the jre 1.1.7 came with 9iAS would not run properly. I've tried to install java2 and jdk1.1.8 from javasoft, still no luck.
Any idea?
Thanks,
Jay Lee
[email protected]
null

Hi,
The problem of installing Oracle Product on P4 computers comes from the symcjit.dll (Java Jusit in time compiler) which doesn't recognize the P4.
I installed Oracle products on my P4 just by copying the CD's on a harddisk and manually replacing the dll (which is Version 3...) by a one I found to be Version 4.0.0.7.
It is maybe not the best solution as it can result some instability (I don't know yet) but at least I didn't bought a brand new computer for nothing.
The question is to know when Oracle will deliver some patches to allow a normal installation on P4s.
Let me know if you want me to send you the dll.
Regards,
Jacques.

Can I install Oracle 8.1.7 Enterprise Edition on Windows 2000 Professional

Sorry if this is a stupid question, but I have Windows 2000 professional edition loaded on my PC and I'm not sure what it allows. Can I load Oracle 8.1.7 Enterprise Edition of the database on this operating system, or do I need to load windows 2000 server software.
Thanks
Ryan

Its a problem with oracle and pentium 4 processors actually. The solution involves renaming or deleting the symcjit.dll in the 8i installation package after you've copied the whole Cd onto your HDD!
I've tried this and it install OK, with a few errors along the way, now I can't get the apache server working, nor on the 9i AS that I've installed as well. Let me know if you get anything useful please?
Michael.
[email protected]

Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
Zurvaan

Yes, of course. Both versions works but you have to be prepared for lots of RAM.

Live! Cam Voice + Windows 2000 - No video input

Hi all,
Since purchasing my Live! Cam Voice, I've always used it with a Windows XP Home machine. Recently, though, I tried to use it with a laptop running Windows 2000 Professional. The installation process encounters no problems and applications like MSN Messenger detect the cam without any difficulty. However, when *any* application attempts to view video from the camera, nothing is returned but darkness (I have lights on :-P) - it's as though it's simply not been switched on. Anyone got any ideas for dealing with this?
Mike
If anyone's interested, the laptop's spec is . . .
Model - Compaq Armada M700 (USB2 connectivity provided via PCMCIA card)
CPU - Intel P3 650Mhz
Memory - 92MB
HD - 6GB
Not sure about anymore details of the spec (graphics accelerator, etc) - I guess Googling for the model would give more details.

I am having the same problem. I am using windows Vista and have tried?recording sound in other applications and it works fine, just not when trying to record in LIVE! cam. I jbought this cam 2 months ago and just now find out it does not work when I need it the most. I am due to give a video presentation in two weeks and will probably have to buy a new cam, what a dissapointment!

Msi GeForce 4 4200 frame rate locked at 60 with Windows 2000

Lost here..... I have an MSI Geforce 4 4200 120MB Video Card slotted on an Asus A7V motherboard - AMD Thunderbird 1Ghz processor with 640mb of ram.
There is a common problem with the Nvidia chip and Windows 2000 in regards to a lock frame rate at 60fps within games.
I've tried several programs to fix this i.e. "Refresh Lock", "Windows 2000/XP Nvidia Refresh rate lock", "PowerStrip 3.15" and "NVFresh Tool 1.0"
But nothing seems to work. I'm sure these program work with older Nvidia cards but not with GeForce 4.
Any Ideas? I even turned the Vsync off and on.
HELP!

p-fulla, I'm not to sure about your system and Windows XP but check out these tweeking sites.
GEFORCEZONE.COM
http://www.geforcezone.com/
and
TWEAKED.NET
http://www.tweak3d.net/
TECHTV.COM/SCREENSAVERS
http://www.techtv.com/screensavers/
(A little advice: If you can, dump XP and install a copy of Windows 2000 second edition. They both have the same KERNAL but I find that Win 2000 is much more compatible for now. I give XP 2 more years before it's the OS for all. I've reinstalled 6 systems with Windows 2000 because of compatibility problems.)

Upgrading from NT 4.0 to Windows 2000

Hello,
I have iPlanet 6 installed and running under Windows NT 4.0. I need to upgrade the server to Windows 2000. Is there anything I need to do to iPlanet 6 before or after the Win2K upgrade? Or do I just upgrade the server, and the iPlanet software will run normally after the OS upgrade?
Thanks for any advice on this topic.
Sincerely,
--John

Dear Darren,
Finally, I tried to use "Out Port.vi" under Windows 2000 (the AccessHW was added in NT as well as in 2000). It seemed to work (it means there was no more error "capability not supported", however it did not work (the result of reading a port using "In port.vi" was always 255, regardless the value I expected.
The configuration of board was exactly in the same state as before crash of Windows NT (no change of base address of board etc.). But it is true that both boards (custom one and PCI-MIO-E-16E-4) were removed and than reinstalled. The LabView program was without any change.
It is just my impression - I did not examine the problem very carefully, so may be there was some other reason of failing.
But finally we decided to reinstalled N
T, because of other (non-NI) devices which are not supported by Win 2000.
Thank you. Regards
Ferda

Cloudscape Kills Windows 2000

Similar Messages

Maybe you are looking for