Clusterware Upgrade 12.1.0.2 complete

Hi,
Currently the cluster with the entire GI + RDBMS 11.2.0.4 stack with BP 11.2.0.4.12 (October 2014) is installed.
Now, a upgrade will be made to 12.1.0.2.
- Step 1 => GI 12.1.0.2
- Step 2 => CPU 12.1.0.2.4
How to check whether a GI 12.1.0.2 installation is complete, except on "crsctl query crs active version" after the root.sh on the "last" node was successful.
My main question is:
Do you have an idea on how to check a GI installation or upgrade is complete?
- Size of the software du -ksh?
- How can I check that all software components are correctly installed?
- Are there any new ressources which have to be keep in mind.
- For example the MGMTDB, GIMR repository and so on.
Is there a tool or something to check all this stuff?
Thank you in advance
SPA09

Hi,
so I did the check via
cluvfy
comp software -n labn1
Verifying software
Check: Software
3162 files verified
Software check passed
Verification of software was successful.
and with option POST CRS verification script
cluvfy stage -post crsinst -n labn1,labn2
regards SPA09

Similar Messages

"Database Upgrade" hangs at 0% during "Completing the Installation" phase

I 'm now installing the EGRCM8.6.3.4000 environment.
"Database Upgrade" hangs at 0% during "Completing the Installation" phase.
I checked the grc.log, and found the following WARN and DEBUG messages.
2012-07-20 02:40:05,544 WARN [Thread-35] DBConfigManager:1425 Database is not initialized yet.
2012-07-20 03:31:10,412 DEBUG [el.Default (self-tuning)'] GrcConfig:2530 Could not get value for key 'grc.sso.enabled' due to data base is not ready.
The connection to DB is OK, and the status of DB instance is open now.
I can't figure out why the console said "Database is not initialized yet".
Does anyone have a clue about it?
Thanks in advance.
Kai

Hi yasir,
Thanks for your response.
I haven't finished the installation yet.
"Completing the Installation" I mentioned in previous thread referred to the final installation phase.
After I entered GRC URL (http://hostname:port/grc), the "Database Upgrade" screen hanged at 0% and cannot proceed.
From the grc.log, I can read that the connection seemed OK, and the database also worked well through SQLPLUS.
I am wondering why it happens.
Thanks & Regards,
Kai
Edited by: 917394 on Aug 1, 2012 7:21 PM

Hi, Hi, Hi I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard. The updated the combo update. Now stuck on blue screen at start-up. Need help. Greatly appreciated. Thank you.

Hi,
I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard.
Then updated the combo update. Now stuck on blue screen at start-up.
Need help. Greatly appreciated. Thank you.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

While using FF Browser, a window appeared, telling me I had an outdated version and should upgrade and it won't complete install nor allow me to uninstall to re

First of all, I have Windows XP/HE/SP3 and my main browser is IE8, tho i also have Google and did have, FF V#21. And while using the FF browser, was alerted that my current version was outdated, etc, even tho I just installed V#21 only 1 week ago, but I took FF's word for it and clicked (x'd) to install the upgrade. The application (AP) used to install was called "Optimum Installer" and had the word "Firefox" in smaller print in the upper left hand corner. This seemed diff from the AP i had used to install just 1 week prior, but since i was using IE8 to install FFV#21 originally, I figured the FF browser used this "Optimum" AP, so I proceeded. The small window then said, "you have chosen to open this file" and yet there was no option to "open" only to "save" or cancel. So i x'd on "save" and my Norton file checker popped up to tell me this file is "safe." But afterwards no install window appeared, so i tried to DL the file again and still no Install window after a total of 8 attempts. I finally found the setup file in "my documents" and opened it and x'd to install. It seemed to work ok, tho again, I was asked alot of questions about making thus and such my default browser, or search engine, or home page, etc, and even some other, but i declined them all, i think, but not sure about one possible miscue. Anyways, the AP told me I'd successfully installed this newer version of FF. So of course i wanted to open it and see how it would work, and i went to my task bar/notification tray to X on the globe icon and instead it showed a "setup" icon. I put my mouse under it and it said "Mozilla Firefox" so i went ahead and x'd on it expecting FF to open. Instead, a small warning appeared telling me i had to reboot for the install..to be completed, so i did, but no change. Tried atleast half a dozen times and nothing, no new or any, version of FF working on my pc now. I even tried to look at support, but no answers, then tried to uninstall and it won't even let me do that, it keeps saying that "your computer must first be restarted to complete a previous upgrade"; yet that already hasn't been working. Also, i went from a V#21 to a V#13.0.1 with 77MB+ of space, which is way more than FF#21. Now I do believe this version is corrupt and really don't want it, but can't get rid of it. I even tried to reinstall V21 (also from IE8, since I don't even have FF browser now) and it goes to a point, but then also tells me I can't get this V21 til I complete an install/upgrade of another version. So basically, i have what i believe is a corrupt/malicious piece of software on my pc, calling itself Mozilla V#13.0.1 - which I can't get rid of, and also can't reinstall the version I had, least i finish installing the one i have but don't think I now want. Keep in mind also, I can't do any of the suggestions from within the FF browser that have been suggested, because I don't have it any more, only IE8 and Google....Any suggestions?

Dear Colbabomb; thankyou for your links.
So far, I looked at your first solution, Revo Uninstaller and it gives you a 30 free trial. Ergo, it will eventually cost money so I'm leery of using those kinds of programs in general, meaning most "free trials" have unwanted strings attached and often are big probs to get rid of later. Perhaps you can assure me that it is easy and very user friendly, before I proceed. And I already ran malwarebytes and it found nothing tho the program still can't be uninstalled. I downloaded Adw Cleaner and during the install, my Norton's security popped up and warned that there were (low risk) threats with two of their "other offers" and i hadn't even actually clicked to agree either of them. Nonetheless, Norton warned me against the "lyrics finder" and "deal ply." In fact, there was a box already with an x in it, saying that you are accepting deal ply if you x on "next." Well, except I unchecked that box before clicking on next, yet when it went to fully install, it still showed that it was adding itself; so, just before the install was 100% completed, I had to abort the whole thing. I really do hope your other suggestions are programs that you personally know that they don't try and trick you. But right now, I would not suggest Adw Cleaner to anyone. I even read the fine print about what they will try and install and how to decline and it still tried sticking stuff on that i believed I had declined. Anyways, i have to leave now, shall pick up later this evening, if my pc is still functioning.

Oracle clusterware upgrade 10.2.0.4

Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciated

Clusterware sits in its own home ... what specifically is the issue not answered by the docs so we can help with the current issue?
Installation docs can be found at http://docs.oracle.com and there is additional support at metalink.

Can I upgrade from Single App to Complete?

If I subscribed to the Single App version of Creative Cloud, but then found I needed other programs, could I upgrade my subscription to Complete or would I have to wait until the subscription term ended in 12 months?

http://www.adobe.com/products/creativesuite/faq.html#subscriptions
"If I decide I would like to upgrade to Adobe Creative Cloud rather than continue to subscribe to an individual CS6 application, how do I do that?
You can upgrade your subscription to a Creative Cloud membership by logging in to www.creativecloud.com, going to the My Account page, and simply walking through the steps to upgrade. You will be given a partial refund on the remaining amount due on your existing subscription."

Clusterware upgrade patch

Hi,
we are trying to install Oracle Rac on Unix sun solaris Sparc 64 bit
I have installed Oracle software base version 10.2.0.1 and applied Opatch and a patch to 10.2.0.5. Now my software is 10.2.0.5
next i have downloaded 10.2.0.1 clusterware software. All i need is is there any patch upgrade to clusterware software from 10.2.0.1 to 10.2.0.5
what are patches i need to apply after installing the clusterware software.
Is there any best documentation that i can get to build my RAC?
i need mandatory patch numbers that i need to apply for my clusterware?
would appreciate your quick response
Thanks

Hi ,
I found it - Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER :)
Thanks anyway !

Is it possible to upgrade CC for photographers to complete educational abo when I realize that I need Premiere Pro too?

I am not sure if I really need Premiere Pro. Is it possible to upgrade to the complete edition later if I start with Photography only ?

Upgrade single to all Cloud http://forums.adobe.com/thread/1235382 may help

Can't upgrade from Photoshop CS6 to Complete CC

I'm trying to upgrade my current plan (Photoshop CS6 1-year plan) to the brand-new Complete CC. I follow this scenario:
1. In a new browser tab go to https://creative.adobe.com/plans?store_code=de
2. In the Special Offers section click the blue "Pick a Plan" button
3. Then choose Complete for CS6
And then I'm just redirected to https://creative.adobe.com/
What am I doing wrong?

Hi there
If you already have a Photoshop single app membership you can upgrade this to complete Creative Cloud from within your account - see http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html - Change to an annual membership or a full Creative Cloud membership
The special offer pricing you referred to only applies to customers who own a Creative Suite CS6 edition or individual product as a perpetual license.
Thanks
Bev

.983 upgrade problems - Contact sync cannot complete

I upgraded the OS to 5.0.0.983 last night and it didn't go well. It was getting the "Uncaught exception: java.lang.NullPointerException" error.
I wiped the whole BB and started fresh. Then I was getting 0x80040fb3 errors for Contact sync'ing.
I have ~700 contacts in Outlook and they sync'd fine. I went through the sync details screen and found a couple that once I deleted them, it would get to the end of the sync process and then give me that "Unable to Complete Synchronization" error. In utter frustration, I moved all the contacts to another contact folder and created asingle "Test Test" contact. It still had the unable to complete error - even with just ONE contact?
I used the Delete Data on the DTM software and created a single contact directly on the BB. The one entry repeats all down the contacts list, yet the Menu>Default>Number of Entries shows only 1.
Anyone have any ideas?

Same problem! All I did was update in response to an update notice and the process has ruined my day. I live by my contacts and now I have none, don't know who's calling when the phone rings, can't text, all because my contacts won't synch. The only official notice to the error code says make sure you have the latest DTM software. Yeah right, a lot of help that does. I had the latest software. This is really frustrating!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Cannot upgrade to iTunes plus or Complete My Album

Every time I try to upgrade to iTunes Plus or try to Complete My Album iTunes does not accept my password. I enter my password and the login box comes up again with the password feild is empty. It sometimes states that I've incorrectly input the password. It accepts my password for all other purchases. Does anyone know why and a solution to the problem?

I think I solved this for me. I had Netbarrier set to enable "Information Hiding" when I first had this problem. Unchecking that setting solved the problem.

Clusterware upgrade

Hello,
We have 10.1.0.3 database with 2 nodes RAC environment on Solaris SPARC 64 bit . We have to upgrade this RAC environment to 10.2.0.3 database .
I couldnt find any proper documents to upgarde clusterware and RAC database as well.I got some document from OTN which is given below.It is just a small piece of information
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/crsunix.htm#BEHIHBBF.
Please provide some document with steps for upgarde clusterware ASAP, if any has the document or performed the upgarde process .
Thanks in advance
Raj

I'm not sure what additional information you require. The documentation you found and referenced in your post is what I've used to perform this upgrade previously.
Are there parts of the process you have specific questions about?
I should mention that the documentation you follow is what you wrote as you did the upgrade on your test system. I hope you're not going to say you don't have a test system :).
If you have specific questions, please post them.

How to upgrade from single app to complete?

How do I upgrade from "Creative Cloud single-app plan — annual - Illustrator" to "Creative Cloud complete plan — annual"?
Please help. I need to use Photoshop and Flash.

See http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html#main-pars_text_2
"Change to an annual membership or a full Creative Cloud membership"

Upgrading iTunes 9.2 never completes

I started upgrading iTunes 9.2 on my MBP yesterday at around 2 p.m. PST and by midnight still had not completed - was simply showing grey screen with a "no" symbol (circle crossed through) and spinning progress circle beneath indefinitely. I force quit and restarted, brought back to same grey screen/symbols.
Suggestions?

Mate, Have same problem, dont know what to do... I restarted 3 times now and no success, even put my snow leopard os x cd in the drive and that didn't help. I have left it running at home, while I'm at work...

Clusterware upgrade to 10.2.0.4

Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4....
why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware and database to 10.2.0.4
Now due to some problems clusterware got crashed and we installed new clusterware 10.2.0.1 and need to upgrade clusterware to 10.2.0.4 with out touching the Oracle RAC database which is already upgraded to 10.2.0.4...
early response is appreciated

AIX is the operating system..... we installed new CRS ans it is functioning properly but now the problem is Clusterware version is 10.2.0.1 and ORacle RAC database version is 10.2.0.4.....
I read in some docs where Clusterware version should be same or newer level with Oracle RAC database home...
If there any patch can u just give the patch number for Clusterware 10.2.0.4....so that it can be downloaded from metalink.....

Clusterware Upgrade 12.1.0.2 complete

Similar Messages

Maybe you are looking for