CO03 cost analysis on wip

Hi,
After the settlement, I got the document posted and the double entry is like below.
When I go to CO03, cost -> analysis, I not able to see the wip related account there. Other account exist in the analysis list.
May I know why wip related account not shown there?
cr change in stock (wip)
dr wip production
Thanks

Hi,
After settlement of production order you cannot see the WIP in CO03,GOTO> cost -> analysis,
At month end when you calculate WIP as long as the status of Production Order is neither TECO nor DLV total costs posted will be treated as WIP
When production Order is settled the posting would be made to FI or to the respective profit Center if used.
In the next month if you want to do further postings to the order you can do provided the status in not TECO or DLV
and during the above case production variance is calculated and settled to FI
Regards,
Raj

Similar Messages

How to get Cost element for a component in co03 cost analysis report

Hi,
I'm using table COSP to find the quantity for a production order component. However, I need to identify the cost element first to get the unique data. In CO03 cost analysis report, there is cost element for the component. Does anyone know how to get it ?
Thanks.

CSKA stores the basic info about the cost element
There is no data in CSKB.
I'm trying to use different tables to get the cost element.
AUFK, AFKO, AFPO, RESB, ...but no luck...

CO03 cost Analysis report to BW Report

I need to create a report in BW same as (CO03) Cost - Analysis, I want to create an extractor that extract data the same as what the (CO03) Cost - Analysis shows, but unfortunately i dont know from which and what table, selection condition should i need to use for my extraction.
or can anyone tell me what function module is used by SAP for this and is it possible to use it in my extractor?
Thanks you very much in advance

Hi Joher,
You can look for Controlling extractors in R/3
Basically
0CO_PC_01
and other data sources related to that.
Also you can look for transaction SBIW and there you can look for Controlling and profitabilty analysis(COPA).
basically it covers all the requirements.But it will contain only those orders which have hit your accounts.
But basically CO03 is related at production planning and maintenace then you try for other sources also which are present in standard extrator those starting with
2LIS_17_.....
This all data sources are based on the PM.
I
I think it should help.

Co03 cost analysis target

Hi,
I see there is target quantity / target cost / actual qty / actual cost.
May I know what is target quantity and target cost? Is it similar to standard?
Thanks

Hi,
Though it is correctly /conceptually defined by Raja Sekhar about the Actual Quantity and Actual Cost.
As far as the Target Costing(Quantity) is concerned,Please find my response which elaborates precisely in genral terms of the business-
There is no clear definition to target costing. Organisations that have implemented it have
had to apply their own unique approach to the concept. In essence, it is a philosophy in
which product development is based on what the market will pay for it, not on what it has
cost to produce. In other words, market price becomes the determinant of cost and not the
other way around, as is the practice with most organisations.
Target costing is a strategic management tool that seeks to reduce a productu2019s cost over its
lifetime. Therefore, the target cost is not necessarily the cost to currently build the product.
Target costing presumes interaction between cost accounting and long-range profit planning; and a commitment to continuous cost reduction.
and you can apply the same logic while executing it for your desired business process in SAP determined by your process owners.
Hope it helps you at some extent.
Cheers
Chandra

Cost Analysis CO03 to BW

Hi BW Gurus
How can we extract data crom the R3 CO03 cost analysis? or is there a standard extraction that can be used for this or can you provide me a sample generic extractor that can be used to get this information.
thank you very much in advance

Hi Joher,
You can look for Controlling extractors in R/3
Basically
0CO_PC_01
and other data sources related to that.
Also you can look for transaction SBIW and there you can look for Controlling and profitabilty analysis(COPA).
basically it covers all the requirements.But it will contain only those orders which have hit your accounts.
But basically CO03 is related at production planning and maintenace then you try for other sources also which are present in standard extrator those starting with
2LIS_17_.....
This all data sources are based on the PM.
I
I think it should help.

CO03 function module for cost analysis report

Hi
Can anybody pls let me know the function module for which gives the cost analysis data in CO03 transaction.
Regards

Hi
I'm sorry; BAPI_INTERNALORDER_GETDETAIL, this BAPI did serve my purpose
Pls let me know if any other FM.
Thanks for your help.
Regards

Cost analysis data in CO03 transaction

Hi Friends
Can anybody pls let me know any funciton module or method to retrieve cost analysis data from CO03 transaction. CO03 -> GOTO -> COSTS -> ANALYSIS, will give an ALV report.
very urgent.
thanks

Hi raghav,
i don't know a FM. I use in Report KOB1 via BDC.
Here a short extract:
DATA BEGIN OF BDCDATA OCCURS 500.
        INCLUDE STRUCTURE BDCDATA.
DATA END OF BDCDATA.
PERFORM KOB1 USING ITAB-AUFNR BUDAT_LOW BUDAT_HIGH.
FORM KOB1 USING AUFNR BUDAT_LOW BUDAT_HIGH.
DATA: BUDAT_LOW_C(10), BUDAT_HIGH_C(10).
WRITE BUDAT_LOW TO BUDAT_LOW_C.
WRITE BUDAT_HIGH TO BUDAT_HIGH_C.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO      USING 'RKAEP000'      '0110'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'    '=ONLI'.
PERFORM BDC_FIELD       USING 'AUFNR-LOW'     AUFNR.
PERFORM BDC_FIELD       USING 'AUFNR-HIGH'    SPACE.
PERFORM BDC_FIELD       USING 'AUFGR'         SPACE.
PERFORM BDC_FIELD       USING 'KSTAR-LOW'     SPACE.
PERFORM BDC_FIELD       USING 'KSTAR-HIGH'    SPACE.
PERFORM BDC_FIELD       USING 'KOAGR'         SPACE.
PERFORM BDC_FIELD       USING 'R_BUDAT-LOW'   BUDAT_LOW_C.
PERFORM BDC_FIELD       USING 'R_BUDAT-HIGH' BUDAT_HIGH_C.
PERFORM BDC_FIELD       USING 'P_DISVAR'      '/TEL'.
CALL TRANSACTION 'KOB1' USING BDCDATA MODE 'E'.
ENDFORM.
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
Hope it helps.
Regards, Dieter

Authorization control for cost analysis/itemization view

Hi Experts,
Can we control the access to cost analysis/itemization report in CO03 by authorization control ?
Thanks

Hi,
Most probably it may not be possible.
moreover, Why do you want this? Cost analysis will be in display mode only. Infact it benefits the user. They can analyse and correct the master if required.
Think once again before making control. Because, everytime people has to come to authorised person to see the cost difference, which will disturb the authorised person.
This is my personal opinion.
Madhava

Target Costs- Cost Analysis

Hi all
In the cost analysis screen of the productin order display (CO03), the target costs column shows zeros for all the cost components, but it is supposed to display the target figures for the order.
Any idea why all zeros are displayed?
Thanks in advance
Rasa

Hi,
Good evening and greetings,
The target costs will appear when the Planned Quantity and Actual Quantity are different...For ex, I create a production order with planned quantity as 100 and completed entire 100 before the production order settlement then the target cost will not be applicable because the variance is between Planned and Actual in this case...If the actual quantity is 80, then the system cannot find the variance between 100 and 80 thereby the entire 20 will be variance...in order to avoid that the system recalculates the planned cost based on actual quantity to arrive at target cost and finds the variance between Target and Actual.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Control cost and control quantity in production order cost analysis

Hi,
When I checked the WIP value, I found there are two field, control cost and control quantity, in the cost analysis of production order which has some relationship with WIP calculation. But I do not know where the control cost from and by what the control quantity is controlled. Could anyone who know advise please?
Regards

Anyone who can help please?

Results Analysis on WIP

Hi Guys,
Do we carry out the Results Analysis to know the cost of the WIP at a particular point of time?
What information does this Results Analysis yield and how do we use this information. Do we calculate the cost of WIP?
And where do we settle these costs?
Pls let me know about this concept of WIP and RA ??
Thanks
Kris..

Hello Srikusap,
WIP means work in progress suppose the production order is made up of 10 qty but at the time of confirmation of order only 8 qty is confirmed for production out of which 6 qty is confirmed as finished nad 2 qty is still on production line to be completed , at the month end if this two qty is not decleared as finished then it will be considered under wip(work in process)
RA is resault analysis in which the WIP is calculated.
Hope this can help .
Thnx

Authorization for Cost Analysis in Production Order

Hi,
Can I maintain the authorization for displaying cost analysis in production order.
I try to create transaction variant....into ZCO02 and ZCO03
but in COOIS it is still branching to CO02 when changing and CO03 when displaying.
I want to disable the cost analysis view in production order so PP people can not access it.
is there any idea?
Please help.
Best regards,
Freddy Ha

Hi,
as i know K_ORDER is authorization for internal order.
We have activate the check in SU24,
but when we tried to trace the authorization when CO02 -> GOTO -> COST _> ANALYSIS
this auth K_ORDER is never check.
Did I miss something here?
Best regards,
Freddy Ha

Cost analysis - Plan cost

Hi all
In the cost analysis screen of the productin order display (CO03), how does the system calculates the plan costs column?
Thanks in advance
Regards
Yiming

Hi
The plan costs come from the preliminary costing of the production order.
See attached link for further information:
http://help.sap.com/saphelp_erp2005/helpdata/en/90/ba6505446711d189420000e829fbbd/frameset.htm
Regards, Elaine

Cost Analysis by Sale Order

Hello,
I'm seeking to enable in BI a Cost Analysis Scenario with repect to the Sales Orders. That is, something similar to the analysis you can easily perform in the R/3 area Accounting -> Controlling -> Product Cost Controlling -> Product Cost by Sales Order.
For instance in standard report KKBC_KUN, you can choose a sales order number and get all the cost elements related to that sales order, with the corresponding costs.
I have examined the following objects provided by the BW's Business Content:
- InfoCube 0PC_C01: it contains only the costs related to production orders, and not the costs associated with sales orders.
- InfoSource 0CO_OM_CCA_9: it seems interesting, in fact it delivers some header and line item data of the Controlling Object Document. Unfortunately it doesn't deliver the crucial characteristics Controlling Object and Controlling Object Type, which I definitly need for enabling my analysis scenario!!
(By the way, are these 2 characteristics delivered by the BC? There exists a 0COSTOBJ characteristic, but it's not used by any object in the flow afterwards. Moreover, I can't find a standard DataSource in R/3 which I can use to load either its attributes or its texts, and see what data enter it..)
Business Content for Product Cost by Sales Order), but none could help me.
It seems really weird that it's not possible to carry out a Cost Analysis by Sales Order in BW, so if anyone has some suggestion it'll be very appreciated indeed.
Thanks & Regards, Davide

I eventually found the following SAP Note. No BCT for this analysis scenario....
Note 584791 - BW-BCT-CO: Costs not extracted on sales orders
Symptom
In R/3, costs are posted directly to sales orders. The costs have to be analyzed in the BW system. In the standard system, however, this data is not extracted into the BW system.
Other terms
0CO_OM_OPA_1; 0CO_OM_OPA_6
Solution
1. There are currently no DataSources for costs on sales orders in the standard BW Business Content. Unfortunately, there are currently no resources scheduled for a new development in this area either.
2. Therefore, the DataSources and the Business Content must be created in the customer project within the framework of consulting as a customer solution concerning the generic extraction options of the BW Service APIs or function modules you have programmed yourself for extracting data.
3. Technical background information about costs on sales orders:
The transaction data is available in the following R/3 tables
COSS and COSP - Totals records or COEP - Line items.
This concerns records for the VB* object numbers.
The master data of the sales orders is contained in the VBAK and VBAP tables.
The 0CO_OM_OPA_1 and 0CO_OM_OPA_6 DataSources only extract costs for orders with master data in the AUFK table. These types of requests always have OR* object numbers. Therefore, these DataSources cannot be used for sales orders.
However, you may be able to assign requests from the AUFK table (for example, maintenance orders or production orders) to a sales order through the AUFK-KDAUF table field.

Process Order Cost Analysis Target and Actual Quantity Missing

This is related to Process order costing .
Issue : Before activating Material Update field in Costing view 1 of Material master , we have created few process orders and Delivered .
Hence cost analysis shows Actual and target cost fields Empty in COST ANALYSIS report of order . After Updating field in Material master , New Process orders are calculated with Actual and Target cost .
Solution needed : How to do Actual and Target cost estimation back in cost analysis report for old process orders which are created before Material Update field ?

You have deleted the Component in the BoM.
Then you have created a production order, check if the start date of this order is after the date change in the BoM..... Can be that the component stills exists in the order ? Have you tried deleting the compoent in the order BoM ?

CO03 cost analysis on wip

Similar Messages

Maybe you are looking for