CO11N header material quantity not populated

when doing co11n in single screen entry and i give 2 kg in the yield and go to goods movement tab, i dont see any quantity populated for the header material?
because of this when i post confirmation, not material document is generated. how can I make the header material quantity field to be automatically populated?
please note, this is not for componet materials and for the routing I have maintained auto gr for the final operation.

Dear
Header material added in goods movement Screen with movement type 101 and quantity instead of populating screen. kindly check goods movement screen, header material is added in screen.
if operation in order is more than one, kindly check all operation's goods movement one by one.
if problem is not solved, kindly recheck operation control key configuration that Auto GR indicator is set.
Thanks

Similar Messages

  • Sales BOM Header Material should not come in J1IJ or delivery

    Hi,
    We have one depot plant,  Now i am using the sales BOM, I have created one Material header with item category LUFM  pricing at item level only, BOM is created, When I am entering the Header material in SO  then alll child items are coming, then while creating the delivery all the child items and also the header items is coming in the delivery but same is coming in the J1IJ  also  I want that the header materal should not come in the J1IJ  and it will be better if it is not in delivery  if i set the indicator delivery block for header materia in SO  then that item si not coming in Delivery   but SO  is shoing  in Open SO  as the header material is not delivered.
    So is there any setting for this.
    Also  in quotaion I have maintain the item category assignment I have assign QT - LUFM - AGN
    but whhen I am entering the header material in VA21  Ffor which the item category is LUFM system is giving the error message
    No item category available (Table T184 QT LUMF  )
    regards,
    zafar
    Edited by: zafar karnalkar on Nov 24, 2011 7:56 AM

    Hi,
    Yes I want that the Header material should not come in J1IJ  only.  but i check the program of J1IJ  it is selecting all the materials  ref. to delivery number  without any further check. also is it possible  insted of SO if first we create the quotation  in quotation therr willl be header material as well as child item  but in SO only child item should get copy when creating ref. to that quotaion,  I try with item category copy control,  but then system is selecting non of the materils from Quotaion to SO,  and when I allowed coopy control of header material from Quotaion to SO  then it is copying Header as well as child items in the SO.
    regards,
    zafar
    Edited by: zafar karnalkar on Nov 24, 2011 10:53 AM

  • Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

    I am having a problem when creating a sale order using BAPI
    BAPI_SALESORDER_CREATEFROMDAT2
    Problem is that sale order item quantity field is not populating
    code is as follows
    ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
    ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
    ORDER_ITEMS_IN-TARGET_QU = 'LB'.
    ORDER_ITEMS_IN-TARGET_QTY = 1.

    Hi,
    Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
    Regds,
    Rudra

  • Invoice amount/quantity not populating when parking invoice before GR

    Hi gurus,
    When I am going to park an invoice without GR (the import cases where invoice comes first) the system is not populating the amount/quantity in the invoice (MIR7).
    If I will check the GR based invoice option in the purchase order than it picks the amount/quantity.
    My users requirement is the population of amount/quantity in case when GR not performed.
    Can anyone help me out from this scenario.
    Regards

    Dear Deepak
    Thanks for your reply but in the cases of import the GR won't be possible. The invoice will be received before GR and if the amount/quantity does not populated automatically then there is a 100% chances of error (manual entry).
    There should be some way through which these fields will be populated.
    Regards

  • EDI header segment E1EDK04 not populating

    Hello,
    We are currently using the intercompany EDI process to create vendor invoices based on an EDI output from a billing document. 
    This worked well for us, until we wanted to change our pricing procedure for tax condition type MWST print i.d. for condition line from "S" to "a". 
    Now when the iDoc is created it contains the correct tax values at the line item level in E1EDP04 but no segment is created for the header tax in E1EDK04. 
    Therefore, the iDoc fails with message 51.
    SAP note 398414 (from 2001) suggets setting "S" in the print i.d. 
    It seems our options are to have a correct idoc output or a correct printed form for EU tax, but not both.  This seems a limitation. 
    We are currently exploring a custom exit but I would like to know if anyone has a std SAP solution as being able to automate intercompany clearing does not seem a unique problem.
    Generous points awarded.

    Dear Roger,
    would you please be more specific on how you resolved this? when use new pricing IDs for item-level relevancy E1EDP04 is not getting populated.
    My requirement for printing is to show tax at item level, any header-relevant pricing ID incurres inconsistent processing of billing output.
    I'm not seing any standard way to meet both requirements, please advice.
    Dear All, any assistance on this topic would be highly appreciated.
    Kind Regards,
    Anastasia

  • Delivery Quantity not Populating in Multiprovider

    Hi
       I created a Multiprovider on ORDER and DELIVERY cubes, and created a QUERY on this Multipartite. In the QUERY OUT put I am not able to get the DELIVERY QUANTITY where as I am able to get ORDER QUANTITY. but iam able to get both in the LISTCUBE of MULTIPROVIDER.
        Please help in this regard
    Thanks
    BHANU

    Bhanuprakash,
    Just try listing out characteristics from both cubes in your query , if they come out matched with each other , then your multiprovider is working right , else it means that the multiprovider design should be relooked.
    Arun

  • Material number is not populating in PO in tcode ME23N

    Hi,
    The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
    This problem occured during the upgradation from 4.6C to ECC6.0.
    We have checked the SPRO configuration for field selections and these are not having any problem.
    Data is updated in database tabes but it is not displayed in ME23N screen.
    Please advice.
    Thanks,
    Rakesh

    check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
    maybe it helps to solve your issue

  • Line item for header material not updating in COEP table

    Hi all,
    from last few days, I found that   when I do confirmation and GR for process order, system is updating all line ( i.e. components, activity types) but line for header material that is finished goods  or semi finished goods is not updating in COEP table,  I have done GR for order and transferred stock from quality too.
    But still its not updating. What could be the reason for it .
    Thanks
    Vivek Varun

    Hi Krishnendu,
    Thanks for the reply ,  FI document is not getting generated.
    What could be the reason for it, as before it was working fine.
    Thanks
    Vivek Varun

  • Re-costing of header material when Sub-item material BOM is updated

    Hi ,
    A sales order is created with a header material (HM) and coressponding sub items (SM1 & SM2 ) got populated automatically from the BOM.Now the costing for this three line items happened as expected i.e.,
    For example :
    Header  Material : HM
              Sub item1 :-      SM1
              Sub item2 :-      SM2
                  MAP of Sub item 1 > SM1  = 20 USD
                  MAP of Sub item 2 > SM2  = 30 USD
    Costing in the main line item appears as 50 USD ( 20 + 30 USD) .
    Now business go to the transaction CU51 and make the changes in the sales order BOM subitem1 ,material SM1 by adding or deleting items in the BOM. After that they are trying to re-cost the sales order and it is observed that only the corresonding sub item (SM1) is getting re-costed with new value.But the header item HM is not getting updated with the new values it still have the old values .
    It would be really helpful if you can let me know what is the issue for this.
    Thanks!
    Regards,
    Dileep.

    Dear Pushpalas,
    IF my understanding is correct then the sub-items is only to split up the exact component quantity and it's usage in the exact
    production or assembly process for information or understanding purpose.
    Sub-items have no operational function in the BOM. They are not copied to the production order. However, you can use sub-
    items to help you create programs for your company (for example, automatic assembly programs).
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/ea/e9b1aa4c7211d189520000e829fbbd/frameset.htm
    Regards
    Mangalraj.S

  • Plant not populating in internal order

    Hi All,
    When we release a serivce order in CRM-Service, system is creating internal order. But it is not populating plant field in internal order. We have done the customizing of linking service organization to plant in CRM. Could you please let me know if there are some other configurations/enhancements to be done to derive plant field for internal order in ECC?
    Regards
    Suresh

    If plant is maintained in Customer-Material Info Master & Customer Master, it will be defaulted in Sales Order.
    But incase of Plant being maintained in Material Master, it is a common practice that it requires to be maintained in Sales Otder. If before entering the Material, Plant is maintained at Header level in sales Order, it will default in Line items, else it is required to be maintained for all Line Item.
    This is Stansdard SAP.
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Defaulting Valuation type of header material in production order

    Hi PP users,
    I have a scenario where a Semi-finished material SF is subject to split valuation as per valuation type = In-House & Export.
    However, the production of SF is always done in MTS environment and client wants that each production order for this SF should be posted for GR (through order confirmation) with valuation type = In-House. When they will have the requirements for SF to be exported, then they will be doing MB1B/309 for SF from valuation type = In-House to Export and then sale from valuation type = Export.
    Now I have seen that for split valuated SF or FG, when you create production order then in the GR tab of order, a field is autoamtically made available for Valuation type. This field is not a mandatory one and hence can be left blank also.
    At the time of order confirmation for SF, the valuation type field is open for input under 'Goods Movements' details. So, even though it is intended to do GR for valuation type = In-House, user can by mistake put valuation type = Export.
    Is there any way in SAP whereby the valuation type (whenever applicable as per header material) field in production order is made mandatory or even defaulted with desired valaution type (in our case, valuation type = In-House)?
    Once either of the two options will become possible, I will be using transaction variant for order confirmation transaction to make the field Valuation type for Output only (not ready for input).
    Thanks in advance,
    PP_HKV...

    Hi
    The field - Valuation type can be made mandatory in T-code MIGO. There is a setting in customizing as Enjoy Setting in Material Management. Using this you can make the field mandatory in MIGO (GR).
    Similarly bu using screen variant you can also make the field mandatory in Order confirmation - Goods movement. (CO11N).
    For making the valuation type as default, there might be a solution in BAdI. Please check with your ABAPer.
    Regards
    Amit parkhi

  • Contract updation for Delivered material quantity

    Hi All,
    I have a problem related, contract and release order updating with reference to delivered material quantity.
    for example let's say contract is created for 1000 units of material A, after that sales order with reference to contract is created for 500 units and delivery is created for 300 units then remaining order quantity cannot be delivered as  customer master is maintained so.
    Now I want to create sales order for 700 units of 'A' but system is not allowing to do so saying the 500 units are already referenced.
    If i use rejection reason in sales order still system is not allowing to create a new sales order with 700 units.
    How to solve this issue?
    Please Help
    Thanks and regards
    Amit

    Hi Manam,
    thank you very much for your immediate reply.
    But the issue is a sales order will have only one delivery as the sales order contains freight amount at header level which helps calculate the excise duties as the prices quoted to customer include freight and duties.
    So now is that possible to update the delivered quantity at contract level so that undelivered quantity can be referenced to create another sales order and can be delivered.
    To describe the process:
    A contract will be created, a sales order will be created for required delivery quantity then delivery will be created. In case due to some problems if delivery quantity is less than sales order then the undelivered quantity will be getting updated in sales order. and the sales order undelivered quantity will be rejected and the contract will get updated.
    Please help.
    Regards
    Amit

  • Target finish value and Actual confirmed value for the header material

    Hi guys,
    For a given production order, I need to get the below mentioned two values for the header material of the production order:
    1. Planned or Target finish value
    2. Actual confirmed value
    will this value be calculated like: 
    Target finish quantity x standard price of the material (maintained in MBEW-STPRS)  = Target Finish Value
    Actual confirmed quantity x standard price of the material (maintained in MBEW-STPRS)  = Actual confirmed Value
    OR
    I can get these required value directly in DB table.
    Please guide here.
    Thanks & regards,
    Ravish
    Edited by: Ravish Kumar Ojha on Oct 28, 2009 5:41 AM
    Edited by: Ravish Kumar Ojha on Oct 28, 2009 5:41 AM

    CO03- go to Costs-- Analysis should give you these details.
    if you are not OK with the columns appearing, you can change by selecting the change Layout and selecting the required options.
    Regards
    Ratan

  • Batch characteristic value not populated!

    Hello guys,
    please would appreciate advice to following:
    I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
    Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
    Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
    Any idea how to populate these chars in batch?
    Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
    Thanks for prompt replies!
    Br, Jan

    Hello,
    SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
    Issue solved using non reference charactereristic and adding code into ZXMBCU04.
    Br, Jan

  • Fields not populated in cube

    hi experts,
                       i have one problem i have sales item,and header dso's which i have loaded the data using flat files.when am trying to load to cube some of the fields of header is not  getting populated.when i am loading only header data that time it is showing the data in cube.when i am loading item data also that time some of the fields of header are not populating in cube.i have tried by taking two seperate cubes for header and item and tried to  loading data to multiprovider. but same issue came.for ur reference i am providing screen shots of that. this is multi provider screen shot in this u can observe that division ,region and some fields are not populating data. in local sand box i have done this please help me to resolve this issue.
    header  cube screen shot before loading to multiprovider.
    item cube screen shot before loading to multiprovider.
    regards
    jaswanthi

    How are you "loading" to a MultiProvider? A MultiProvider is merely a "view" on 1 or more InfoProviders, nothing gets loaded in it.
    The screen shot of your MultiProvider shows data of your items InfoCube only... have you filtered on the InfoProvider field? If not, try and filter on your header InfoCube and see whether it shows any data. If not, then there's something wrong with your mappings in the MultiProvider definition.
    It's perfectly normal to have empty fields if you're combining 2 InfoProviders into 1 MultiProvider. If that's not what you want, you should consider an InfoSet (which "joins" data) or model it so that when you're sending item data to a new InfoCube, you "look up" the missing header data in your header data DSO and add it.

Maybe you are looking for