Code generating in ITS
Hello,
I have a link on ITS Page.
In code I have written it as \dfsrb\DfsDE\LOC\aaAE\bb\cc\dd.html
But in source code the link generated is \dfsrbDfsDELOCaaAEbbccdd.html
Could you please tell me how this is happening.
What could be measure to avoid this .
Regards,
satya
Hello Satya,
Not sure why the forward slashes are being removed, but you could try encoding them. (%2F)
edgar
Similar Messages
-
How do I make this code generate a new pro when the "NEXT" button is pushed
How do I make this code generate a new set of problem when the "NEXT" Button is pushed
* To change this template, choose Tools | Templates
* and open the template in the editor.
/* Figure out how to create a new set of problms
* Type a list of specifications, include a list of test cases
* DONE :]
package javaapplication1;
import java.awt.GridLayout;
import java.awt.Window;
import javax.swing.*;
import java.awt.event.*;
* @author Baba Akinlolu -
class Grid extends JFrame{
int done = 0;
final int score = 0;
final int total = 0;
//Create Panels
JPanel p2 = new JPanel();
JPanel p3 = new JPanel();
final JPanel p1 = new JPanel();
//Create Radio buttons & group them
ButtonGroup group = new ButtonGroup();
final JRadioButton ADD = new JRadioButton("Addition");
final JRadioButton SUB = new JRadioButton("Subtraction");
final JRadioButton MUL = new JRadioButton("Multiplication");
final JRadioButton DIV = new JRadioButton("Division");
//Create buttons
JButton NEXT = new JButton("NEXT");
JButton END = new JButton("End");
//Create Labels
JLabel l1 = new JLabel("First num");
JLabel l2 = new JLabel("Second num");
JLabel l3 = new JLabel("Answer:");
JLabel l4 = new JLabel("Score:");
final JLabel l5 = new JLabel("");
JLabel l6 = new JLabel("/");
final JLabel l7 = new JLabel("");
//Create Textfields
final JTextField number = new JTextField(Generator1());
final JTextField number2 = new JTextField(Generator1());
final JTextField answer = new JTextField(5);
Grid(){
setLayout(new GridLayout(4, 4, 2 , 2));
p2.add(ADD);
p2.add(SUB);
group.add(ADD);
group.add(SUB);
group.add(MUL);
group.add(DIV);
p2.add(ADD);
p2.add(SUB);
p2.add(DIV);
p2.add(MUL);
//Add to panels
p1.add(l1);
p1.add(number);
p1.add(l2);
p1.add(number2);
p1.add(l3);
p1.add(answer);
p1.add(l4);
p1.add(l5);
p1.add(l6);
p1.add(l7);
p3.add(NEXT);
p3.add(END);
//Add panels
add(p2);
add(p1);
add(p3);
//Create Listners
Listeners();
void Listeners(){
NEXT.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
int answer1 = 0;
//Grab the numbers entered
int numm1 = Integer.parseInt(number.getText());
int numm2 = Integer.parseInt(number2.getText());
int nummsanswer = Integer.parseInt(answer.getText());
//Set the score and total into new variabls
int nummscore = score;
int nummtotal = total;
//Check if the add radio button is selected if so add
if (ADD.isSelected() == true){
answer1 = numm1 + numm2;
//otherwise check if the subtract button is selected if so subtract
else if (SUB.isSelected() == true){
answer1 = numm1 - numm2;
//check if the multiplication button is selected if so multiply
else if (MUL.isSelected() == true){
answer1 = numm1 * numm2;
//check if the division button is selected if so divide
else if (DIV.isSelected() == true){
answer1 = numm1 / numm2;
//If the answer user entered is the same with th true answer
if (nummsanswer == answer1){
//add to the total and score
nummtotal += 1;
nummscore += 1;
//Convert the input back to String
String newscore = String.valueOf(nummscore);
String newtotal = String.valueOf(nummtotal);
//Set the text
l5.setText(newscore);
l7.setText(newtotal);
//Otherwise just increase the total counter
else {
nummtotal += 1;
String newtotal = String.valueOf(nummtotal);
l7.setText(newtotal);
//Create End listener
END.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
// get the root window and call dispose on it
Window win = SwingUtilities.getWindowAncestor(p1);
win.dispose();
//new Grid();
String Generator1(){
int randomnum;
randomnum = (1 + (int)(Math.random() * 100));
String randomnumm = String.valueOf(randomnum);
return randomnumm;
public class Main {
* @param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
JFrame frame = new Grid();
frame.setTitle("Flashcard Testing");
frame.setSize(500, 200);
frame.setLocationRelativeTo(null);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
}Edited by: SirSaula on Dec 7, 2009 10:17 AMNot only are you continuing to post in the wrong forum but now you are multiposting: [http://forums.sun.com/thread.jspa?threadID=5418935]
If people haven't answered you other posting its probably because we don't understand the question. Quit cluttering the forum by asking the same question over and over and then next time you have a new question post it in the proper forum. Your first posting was moved becuase you didn't post it properly. -
How do I edit the file created by code generator?
hi all,
I want to modify a java file that is generated when you create the webdynpro, but I can not change.
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
how can I disable the file to modify
thanks!Hi Pablo.
There's no way to modify it, NW2004s and its IDE has a code compilation based in some internal scripts based on eclipse plugin architecture.
In your code you must consider this.
1 - Try to find in your declared methods, importing directives, packages declarations some like this:
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.sap.teste;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateTesteApp).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import com.sap.teste.wdp.IPrivateTesteApp;
import com.sap.myimport.MyClass;
//@@end
//@@begin
//@@end
it means that between begin and end...you can add what you want..and the code will not be removed after class compilation....
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
//@@begin wdDoExit()
//@@end
int this case too....if you implement something between //@@begin and //@@end in the method scope...all part of your code will be surely safe. -
Automatic html code generated in {module_case} output
Does anyone know a work around for the automatic spacing and carriage return that BC system generates when the {module_case} is displayed? I have BC form that is transferring this data from BC to a third party site and the extra code being generated :
%0D = Carriage Return
%0A=line feed
Is killing the callback method of the form
Screenshot of how form looks on screen
http://screencast.com/t/aSw3pywL
Screenshot of backend with extra return
http://screencast.com/t/4xfESLGpu
Screenshot of extra code generated
http://screencast.com/t/NmlCxbGgiECIn struts my string pritns like this
var abc = new Array(["A", "B"]);
I pass this string to JSP. and in the outputted html,
all double quotes are replaces by its equivalent ASCII "
:( -
Air QR code generator/reader
Anyone have any current recommendations for Air QR code generator and reader (ANE, lib)?
I need a solution that will:
1) Generate a text/string QR code in Air desktop
2) Generate a text/string QR code in Air cross-platform mobile app (android or iOS). Same code base as #1.
3) Scan the QR code on cross-platform mobile device (android, iOS) from within my Air app.
I see a lot of search results for various ways, but so far nothing cross-platform.
Thanks!
DonHi Sbhave.
Thanks for your response.
I still need to read the post but it certainly looks interesting.
I think it explains how I can make a QR Code having contact details.
I got your AS3 Qr Code reader to work and it reads a QR Code BEAUTIFULLY, even a VCard. Now your code simply reads the QR Code and outputs the read to a window. Your code doesnt tell the mobile device what to do with the output. Now it is easy enough to add some code which, if the data is a web address, will go to that webaddress. However if I have used your QR Reader (in AS3) to read a vcard how do I code the Reader so that it knows that it must add the contact info to my mobile devices contacts list and can actually do this ? I have some commercial QR Code readers which use the Zing Library and recognise that its a Vcard and give the choice to save to the contacts list.
Thanks
Paul -
NWDS Webdynpro Code Generator overwrites custom source with old fragements
Hello,
I am developing Web Dynpro Components in Java with NWDS 7.1. and I am experiencing a strange behavoiur of the code generator. After I save the changes I made to a View in the "View Editor" the View is rebuild and the corresponding Java Source Code gets overwritten with an older version of it.
The same thing happens after editing the model or context bindings of the view controller, except that in this case all Java Sources are rebuild and overwritten. Its not that all method implementations are deleted, itu2019s the matter that they are replaced by older versions.
As a developer I think thatu2019s very dangerous, because sometimes I don't recognize which code areas are rewritten by designtime - I get Null Pointer Exu2019s by runtime.
Does anyone of you have an advice for me how to avoid these problems? Does anyone of you experienced the same behaviour before?
Thanks in advance!
Kind regards
Andreas HornYour question is not NWDI related. Post it in the [Web Dynpro for Java|Web Dynpro Java; forum or the [Java EE 5 @ SAP forum|Java Development;.
-
Warning codes generated in UCCHECK - Technical Upgrade - 4.0b to ECC 6.0
Hi SDN'ers ,
I am currently working on Technical Upgrade project from 4.0 b system to ECC 6.0 system . I am facing a
problem relating to the analysis of the warnings displayed whehn we run the UCCHECK for the client inventory by
checking the "Display lines that cannot be analyzed statically" option under the Selection-screen block
"Statements that cannot be analyzed statically" .Based on the warning codes generated during UCCHECK, they can
be classified into 12 different categories given below in the list ( Viz. ABB,MESSAGEG!C,MESSAGEG!D......MESSAGEG!P).The same are given below in the end
I want to know
- Which are the warning codes which need resolution so that the program does not encounter any runtime
errors or during Integration testing ?
- Do all the offset related errors (For example ;variable A = B+offset(length)
or variable A+offset(length) = B ) need resolution so that the program gives no runtime error.
- Also, do all statements where length is calculated using STRLEN also need changes ? I have seen offset length related warnings come under MESSAGEG!M warning code.
The objective of this is to make sure that the upgraded system ECC 6.0 in Australia ,when rolled out to
non-English speaking geographies in APAc such as Malaysia,Japan or China would only need translations and no ABAP Coding effort even when using languages such as Japanese which have double byte characters.
S.No. Error Code Message
1 ABB Syntax Check Aborted
ABB Total
2 MESSAGEG!C check at runtime. at runtime.
statement because of untyped or generic operands. It can only carry out this
The system could not perform a static convertibility check on the current
MESSAGEG!C Total
3 MESSAGEG!D out this check at runtime. It can only carry out this check at runtime.
to a table line because of untyped or generic operands. It can only carry out
The system could not perform a static check on convertibility from a work area
MESSAGEG!D Total
4 MESSAGEG!E check at runtime. at runtime.
defined by a "DATA" statement. .
statement because of untyped or generic operands. It can only carry out this
Field "ELEMENTN" is unknown. It is neither in one of the specified tables nor
The system could not perform a static comparability check on the current
MESSAGEG!E Total
5 MESSAGEG!F operand "<FELD1>" for the current statement. .
MESSAGEG!F Total
6 MESSAGEG!G current statement on incompletely typed operand "<DATA>". .
MESSAGEG!G Total
7 MESSAGEG!H for the incompletely typed operand "<S>". . - - - - - - - - -
The system cannot perform a static check on a character-type field data type
MESSAGEG!H Total
8 MESSAGEG!I incompletely-typed operand "<A>" in the current statement. .
The system cannot perform a static check on a character-type data type for the
MESSAGEG!I Total
9 MESSAGEG!J "<%_1_SYSINI>" in the current statement to check whether the operand can be
The system cannot perform a static check on incompletely-typed operand "VALUE"
MESSAGEG!J Total
Early response wil be highly appreciated.Hi Karthik
>
> 1) SPDD adjustments are done in which phase? PREPARE or UPGRADE?
>
SPDD is done in Upgrade ->Phase ACT_700
> 2) Are here special cases where the adjustments need to be done before running the UPGRADE phase?
>
At ACT_700 phase stop the upgrade and take a backup of the DB and the PUT<DIR> before starting the SPDD activity.
Make sure there are no pending tp request. Either release them or delete them.
All phase need to be completed successfully in PREPARE, before starting UPGRADE
Cheers
Shaji
Edited by: Shaji Jacob on May 5, 2008 9:23 PM -
Warning codes generated in UCCHECK
Hi SDN'ers ,
I am currently working on Technical Upgrade project from 4.0 b system to ECC 6.0 system . I am facing a
problem relating to the analysis of the warnings displayed whehn we run the UCCHECK for the client inventory by
checking the "Display lines that cannot be analyzed statically" option under the Selection-screen block
"Statements that cannot be analyzed statically" .Based on the warning codes generated during UCCHECK, they can
be classified into 12 different categories given below in the list ( Viz. ABB,MESSAGEG!C,MESSAGEG!D......MESSAGEG!P).The same are given below in the end
I want to know
- Which are the warning codes which need resolution so that the program does not encounter any runtime
errors or during Integration testing ?
- Do all the offset related errors (For example ;variable A = B+offset(length)
or variable A+offset(length) = B ) need resolution so that the program gives no runtime error.
- Also, do all statements where length is calculated using STRLEN also need changes ? I have seen offset length related warnings come under MESSAGEG!M warning code.
The objective of this is to make sure that the upgraded system ECC 6.0 in Australia ,when rolled out to
non-English speaking geographies in APAc such as Malaysia,Japan or China would only need translations and no ABAP Coding effort even when using languages such as Japanese which have double byte characters.
S.No. Error Code Message
1 ABB Syntax Check Aborted
ABB Total
2 MESSAGEG!C check at runtime. at runtime.
statement because of untyped or generic operands. It can only carry out this
The system could not perform a static convertibility check on the current
MESSAGEG!C Total
3 MESSAGEG!D out this check at runtime. It can only carry out this check at runtime.
to a table line because of untyped or generic operands. It can only carry out
The system could not perform a static check on convertibility from a work area
MESSAGEG!D Total
4 MESSAGEG!E check at runtime. at runtime.
defined by a "DATA" statement. .
statement because of untyped or generic operands. It can only carry out this
Field "ELEMENTN" is unknown. It is neither in one of the specified tables nor
The system could not perform a static comparability check on the current
MESSAGEG!E Total
5 MESSAGEG!F operand "<FELD1>" for the current statement. .
MESSAGEG!F Total
6 MESSAGEG!G current statement on incompletely typed operand "<DATA>". .
MESSAGEG!G Total
7 MESSAGEG!H for the incompletely typed operand "<S>". . - - - - - - - - -
The system cannot perform a static check on a character-type field data type
MESSAGEG!H Total
8 MESSAGEG!I incompletely-typed operand "<A>" in the current statement. .
The system cannot perform a static check on a character-type data type for the
MESSAGEG!I Total
9 MESSAGEG!J "<%_1_SYSINI>" in the current statement to check whether the operand can be
The system cannot perform a static check on incompletely-typed operand "VALUE"
MESSAGEG!J Total
Early response wil be highly appreciated.
10 MESSAGEG!K "<F_YEAR>" in the current statement to check whether the operand can be
The system cannot perform a static check for incompletely-typed operand "WINY2"
MESSAGEG!K Total
11 MESSAGEG!M .
at runtime. .
check will take place at runtime. .
entries for operand "<F_SOURCE>(2)". This check will take place at runtime. .
entries for operand "<F_SOURCE>+2(2)". This check will take place at runtime.
The system cannot perform a static check on the validity of the offset/length
MESSAGEG!M Total
12 MESSAGEG!P out this check at runtime. at runtime.
statement because of untyped or generic operands. The system can only carry
The system could not perform a static compatibility check on the current
MESSAGEG!P Total
Grand TotalHi Monica,
as bhaskar said no need to worry about warnings.
warnings will not lead to dump. only runtime errors will lead to dump.
if the system is unicode, remediate the objects without errors.
we can observe mainly,
open dataset, structure incompatibilty, offset, in byte or char mode etc
thanks
vinod -
Code generate report in excel format from portal(Application Server)
Hi all
Please give some solution with code generate report in excel format from
oracle portal(Application Server).Not feasible.
Why? Because "the Excel format" is a binary and proprietary Microsoft file format. And writing a generator to generate Excel files will be complex, and resource expensive. In the vast majority of cases this will not be justified.
As an alternative the very basic Microsoft XML office format can be used. But note that this is not a a ISO standard (it has been shot down in flames) - and effort and resources for that would be better spend on the Open Document XML standard (which very likely will be ratified as the ISO standard instead).
Of course, you could have meant a CSV file - in which case, you need to play close attention to details. CSV is not an Excel format. A software designers and developers, our success is determined by attention to technical detail. In which case you are not paying any attention to technical detail by confusing CSV with Excel. -
Hello All,
I'm facing problems when using t-code CS03 in ITS.
1. When I click on Document item in a BOM, it is not navigating to document in CV03N. the system reacts nothing....
2. From document tab, I cannot come back to Material and General tab
3. Back button and few more buttons are not working in ITS - CS03 tcode
I came across similar threads, However the solutions are not mentioned in it.
Could you please let me know any solution provided by SAP for this ITS limitations? Thanks!!
Regards,
SaravanaHello
In transaction CS02/3 shows the document assigned to the BOM item
transaction MM02 is showing the document assigned to the material master.
Transaction CV02N/03N
Go to the object links tab: there you can choose the material master ' and ' the BOM item separately. -
Hello,
It seems that FPGA module cannot interface custom FPGA board.
I wonder if FPGA can be used as a HDL code generator.
Here is what I'd like to do :
- code an algorithm in a LabVIEW block diagram
- make a HDL from the BG with FPGA module
- build the HDL code in my FPGA IDE (Quartus II, in this case)
- download it in my FPGA target with the JTAG probe
- use RS232 (or any VISA interface) to communicate the results to another LabVIEW vi
The main question is : can LabVIEW FPGA module generate HDL code ?
Thanks,Hello,
The LabVIEW FPGA module generates *.vhd files, located in the directory C:\NIFPGA80\clntTmp\[projectDir]\ (if you use LabVIEW 8.0); those files are then sent to Xilinx tools to generate the FPGA bitfile. LabVIEW FPGA module is not designed for non-NI products, this is why those intermediate files are encrypted.
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
CTD - Certified TestStand Developer / Développeur TestStand Certifié
CLAD - Certified LabVIEW Associate Developer -
OWB Code generator - does not generate consistent code in every deployment
Hi,
I have a mapping to load dimension WM_USERS_ADVISORS_DIM.
Every time I generate the code for this mapping code generated is different than previous. Hence the query optimization applied at database level does not work.
following are 2 different queries generated for the same mapping.
Also, In target load order for this dimension, automatically values are populated like USERS_ADVISORS_STG, where as I have not declared this table/dim.
I am unable to remove this from load order. Every time code gets generated these _STG is added to each level in Dimension.
Please suggest how to have a consistent ETL generated every single time ETL deploys?
INSERT /*+ APPEND PARALLEL ("USERS_ADVISORS_STG") */ INTO "OWB$ *USERS_ADVISORS__1FFE2A* " "USERS_ADVISORS_STG" ( "PERSON_ID", "ADVISOR_PERSON_ID", "INVITE_CLIENT_ID", "IS_PRIMARY_ADVISOR", "SCHEMA_NAME", "DUMMY_LEVEL_KEY", "DESCRIPTION", "DUMMY_VALUE") (SELECT "INGRP1". "PERSON_ID" "PERSON_ID$10", "INGRP1". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$10", "INGRP1". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$8", "INGRP1". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$10", "INGRP1". "SCHEMA_NAME" "SCHEMA_NAME$9", "INGRP2". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY$8", "INGRP2". "DESCRIPTION" "DESCRIPTION$12", "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" "LOOKUP$$$_1_DUMMY_VALUE$6" FROM ( SELECT "LOOKUP_INPUT_SUBQUERY$5". "USERS_ADVISORS_KEY$6" "USERS_ADVISORS_KEY", "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" "PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" "ADVISOR_PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "INVITE_CLIENT_ID$9" "INVITE_CLIENT_ID", "LOOKUP_INPUT_SUBQUERY$5". "IS_PRIMARY_ADVISOR$11" "IS_PRIMARY_ADVISOR", "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" "SCHEMA_NAME", "LOOKUP_INPUT_SUBQUERY$5". "LOOKUP$$$_1_DUMMY_VALUE$7" "LOOKUP$$$_1_DUMMY_VALUE" FROM (SELECT "DEDUP_SRC_0$2". "USERS_ADVISORS_KEY$7" "USERS_ADVISORS_KEY$6", "DEDUP_SRC_0$2". "PERSON_ID$12" "PERSON_ID$11", "DEDUP_SRC_0$2". "ADVISOR_PERSON_ID$12" "ADVISOR_PERSON_ID$11", "DEDUP_SRC_0$2". "INVITE_CLIENT_ID$10" "INVITE_CLIENT_ID$9", "DEDUP_SRC_0$2". "IS_PRIMARY_ADVISOR$12" "IS_PRIMARY_ADVISOR$11", "DEDUP_SRC_0$2". "SCHEMA_NAME$11" "SCHEMA_NAME$10", "DEDUP_SRC_0$2". "LOOKUP$$$_1_DUMMY_VALUE$8" "LOOKUP$$$_1_DUMMY_VALUE$7" FROM (SELECT CAST (NULL AS NUMERIC) "USERS_ADVISORS_KEY$7", "AGG_INPUT$2". "PERSON_ID$13" "PERSON_ID$12", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13" "ADVISOR_PERSON_ID$12", MIN( "AGG_INPUT$2". "INVITE_CLIENT_ID$11") "INVITE_CLIENT_ID$10", MIN( "AGG_INPUT$2". "IS_PRIMARY_ADVISOR$13") "IS_PRIMARY_ADVISOR$12", "AGG_INPUT$2". "SCHEMA_NAME$12" "SCHEMA_NAME$11", MIN( "AGG_INPUT$2". "LOOKUP$$$_1_DUMMY_VALUE$9") "LOOKUP$$$_1_DUMMY_VALUE$8" FROM (SELECT ( :B4 ) "USERS_ADVISORS_KEY$8", "USER_ADVISOR". "PERSON_ID" "PERSON_ID$13", "USER_ADVISOR". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$13", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$11", "USER_ADVISOR". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$13", ( :B3 ) "SCHEMA_NAME$12", 0 "LOOKUP$$$_1_DUMMY_VALUE$9" FROM ( SELECT "SET_OPERATION$2". "PERSON_ID$14" "PERSON_ID", "SET_OPERATION$2". "ADVISOR_PERSON_ID$14" "ADVISOR_PERSON_ID", "SET_OPERATION$2". "CREATED_ON$2" "CREATED_ON", "SET_OPERATION$2". "IS_PRIMARY_ADVISOR$14" "IS_PRIMARY_ADVISOR", "SET_OPERATION$2". "MOD_TAG$2" "MOD_TAG", "SET_OPERATION$2". "MODIFIED_ON$2" "MODIFIED_ON" FROM (SELECT "PERSON_ID" "PERSON_ID$14", "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$14", "CREATED_ON" "CREATED_ON$2", "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$14", "MOD_TAG" "MOD_TAG$2", "MODIFIED_ON" "MODIFIED_ON$2" FROM (SELECT "USERS_ADVISORS". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS" "USERS_ADVISORS" UNION SELECT "USERS_ADVISORS_DLOG". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS_DLOG". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS_DLOG". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS_DLOG". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS_DLOG". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS_DLOG". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS_DLOG" "USERS_ADVISORS_DLOG") ) "SET_OPERATION$2" ) "USER_ADVISOR" LEFT OUTER JOIN ( SELECT "INVITE_CLIENTS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "INVITE_CLIENTS". "PERSON_ID" "PERSON_ID", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID" FROM "ADVIEWPROD". "INVITE_CLIENTS" "INVITE_CLIENTS" ) "INVITE_CLIENTS" ON ( (( "USER_ADVISOR". "PERSON_ID" = "INVITE_CLIENTS". "PERSON_ID" )) AND (( "USER_ADVISOR". "ADVISOR_PERSON_ID" = "INVITE_CLIENTS". "ADVISOR_PERSON_ID" )) ) WHERE ( ( "USER_ADVISOR". "CREATED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) OR "USER_ADVISOR". "MODIFIED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) ) ) ) "AGG_INPUT$2" GROUP BY "AGG_INPUT$2". "PERSON_ID$13", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13", "AGG_INPUT$2". "SCHEMA_NAME$12" ) "DEDUP_SRC_0$2" ) "LOOKUP_INPUT_SUBQUERY$5" WHERE ( (NOT ( "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" IS NULL)) ) ) "INGRP1" LEFT OUTER JOIN ( SELECT "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY", "DUMMY_LEVEL_0". "DUMMY_VALUE" "DUMMY_VALUE", "DUMMY_LEVEL_0". "DESCRIPTION" "DESCRIPTION" FROM "WM_USERS_ADVISORS_DIM" "DUMMY_LEVEL_0" WHERE ( "DUMMY_LEVEL_0". "DIMENSION_KEY" = "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" ) AND ( "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" IS NOT NULL ) ) "INGRP2" ON ( ( "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" = "INGRP2". "DUMMY_VALUE" ) ) )
INSERT /*+ APPEND PARALLEL ("USERS_ADVISORS_STG") */ INTO "OWB$ *USERS_ADVISORS__1FEA66* " "USERS_ADVISORS_STG" ( "PERSON_ID", "ADVISOR_PERSON_ID", "INVITE_CLIENT_ID", "IS_PRIMARY_ADVISOR", "SCHEMA_NAME", "DUMMY_LEVEL_KEY", "DESCRIPTION", "DUMMY_VALUE") (SELECT "INGRP1". "PERSON_ID" "PERSON_ID$10", "INGRP1". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$10", "INGRP1". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$8", "INGRP1". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$10", "INGRP1". "SCHEMA_NAME" "SCHEMA_NAME$9", "INGRP2". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY$8", "INGRP2". "DESCRIPTION" "DESCRIPTION$12", "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" "LOOKUP$$$_1_DUMMY_VALUE$6" FROM ( SELECT "LOOKUP_INPUT_SUBQUERY$5". "USERS_ADVISORS_KEY$6" "USERS_ADVISORS_KEY", "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" "PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" "ADVISOR_PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "INVITE_CLIENT_ID$9" "INVITE_CLIENT_ID", "LOOKUP_INPUT_SUBQUERY$5". "IS_PRIMARY_ADVISOR$11" "IS_PRIMARY_ADVISOR", "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" "SCHEMA_NAME", "LOOKUP_INPUT_SUBQUERY$5". "LOOKUP$$$_1_DUMMY_VALUE$7" "LOOKUP$$$_1_DUMMY_VALUE" FROM (SELECT "DEDUP_SRC_0$2". "USERS_ADVISORS_KEY$7" "USERS_ADVISORS_KEY$6", "DEDUP_SRC_0$2". "PERSON_ID$12" "PERSON_ID$11", "DEDUP_SRC_0$2". "ADVISOR_PERSON_ID$12" "ADVISOR_PERSON_ID$11", "DEDUP_SRC_0$2". "INVITE_CLIENT_ID$10" "INVITE_CLIENT_ID$9", "DEDUP_SRC_0$2". "IS_PRIMARY_ADVISOR$12" "IS_PRIMARY_ADVISOR$11", "DEDUP_SRC_0$2". "SCHEMA_NAME$11" "SCHEMA_NAME$10", "DEDUP_SRC_0$2". "LOOKUP$$$_1_DUMMY_VALUE$8" "LOOKUP$$$_1_DUMMY_VALUE$7" FROM (SELECT CAST (NULL AS NUMERIC) "USERS_ADVISORS_KEY$7", "AGG_INPUT$2". "PERSON_ID$13" "PERSON_ID$12", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13" "ADVISOR_PERSON_ID$12", MIN( "AGG_INPUT$2". "INVITE_CLIENT_ID$11") "INVITE_CLIENT_ID$10", MIN( "AGG_INPUT$2". "IS_PRIMARY_ADVISOR$13") "IS_PRIMARY_ADVISOR$12", "AGG_INPUT$2". "SCHEMA_NAME$12" "SCHEMA_NAME$11", MIN( "AGG_INPUT$2". "LOOKUP$$$_1_DUMMY_VALUE$9") "LOOKUP$$$_1_DUMMY_VALUE$8" FROM (SELECT ( :B4 ) "USERS_ADVISORS_KEY$8", "USER_ADVISOR". "PERSON_ID" "PERSON_ID$13", "USER_ADVISOR". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$13", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$11", "USER_ADVISOR". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$13", ( :B3 ) "SCHEMA_NAME$12", 0 "LOOKUP$$$_1_DUMMY_VALUE$9" FROM ( SELECT "SET_OPERATION$2". "PERSON_ID$14" "PERSON_ID", "SET_OPERATION$2". "ADVISOR_PERSON_ID$14" "ADVISOR_PERSON_ID", "SET_OPERATION$2". "CREATED_ON$2" "CREATED_ON", "SET_OPERATION$2". "IS_PRIMARY_ADVISOR$14" "IS_PRIMARY_ADVISOR", "SET_OPERATION$2". "MOD_TAG$2" "MOD_TAG", "SET_OPERATION$2". "MODIFIED_ON$2" "MODIFIED_ON" FROM (SELECT "PERSON_ID" "PERSON_ID$14", "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$14", "CREATED_ON" "CREATED_ON$2", "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$14", "MOD_TAG" "MOD_TAG$2", "MODIFIED_ON" "MODIFIED_ON$2" FROM (SELECT "USERS_ADVISORS". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS" "USERS_ADVISORS" UNION SELECT "USERS_ADVISORS_DLOG". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS_DLOG". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS_DLOG". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS_DLOG". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS_DLOG". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS_DLOG". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS_DLOG" "USERS_ADVISORS_DLOG") ) "SET_OPERATION$2" ) "USER_ADVISOR" LEFT OUTER JOIN ( SELECT "INVITE_CLIENTS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "INVITE_CLIENTS". "PERSON_ID" "PERSON_ID", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID" FROM "ADVIEWPROD". "INVITE_CLIENTS" "INVITE_CLIENTS" ) "INVITE_CLIENTS" ON ( (( "USER_ADVISOR". "PERSON_ID" = "INVITE_CLIENTS". "PERSON_ID" )) AND (( "USER_ADVISOR". "ADVISOR_PERSON_ID" = "INVITE_CLIENTS". "ADVISOR_PERSON_ID" )) ) WHERE ( ( "USER_ADVISOR". "CREATED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) OR "USER_ADVISOR". "MODIFIED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) ) ) ) "AGG_INPUT$2" GROUP BY "AGG_INPUT$2". "PERSON_ID$13", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13", "AGG_INPUT$2". "SCHEMA_NAME$12" ) "DEDUP_SRC_0$2" ) "LOOKUP_INPUT_SUBQUERY$5" WHERE ( (NOT ( "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" IS NULL)) ) ) "INGRP1" LEFT OUTER JOIN ( SELECT "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY", "DUMMY_LEVEL_0". "DUMMY_VALUE" "DUMMY_VALUE", "DUMMY_LEVEL_0". "DESCRIPTION" "DESCRIPTION" FROM "WM_USERS_ADVISORS_DIM" "DUMMY_LEVEL_0" WHERE ( "DUMMY_LEVEL_0". "DIMENSION_KEY" = "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" ) AND ( "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" IS NOT NULL ) ) "INGRP2" ON ( ( "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" = "INGRP2". "DUMMY_VALUE" ) ) )
Thanks in advance
Meg
Edited by: Meg on Jan 4, 2012 5:33 PMHello,
These wrappers were separated into different templates. What you would need to do is to run the templates that you need. You can find these templates in the C:\Program Files\National Instruments\MATRIXx\mx_71.4\case\ACC\templates folder.
Hope this helps.
Ricardo S.
National Instruments -
Hallo,
ich muss hunderte Visitenkarten erstellen auf denen ein personalisierter QR-Code oben sein soll. Laut Adobe Neuerungen in der CC 2014 InDesign, soll es nun
einen 'Erweiterter QR-Code-Generator' geben mit dem QR Codes automatisch erstellt werden können. Nur wo finde ich den? Help!
Danke!Hallo zusammen!
Ich glaube hier ist die Lösung.
Auto Generate QR Codes with Data Merge in InDesign CC 2014
Hatte nämlich auch das Problem und wusste nicht wie die Spalte für den QR-Code benannt werden musste.
Die Spalte muss so benannt werden "#QRcodes" damit sie erkannt wird.
Habe das ganze aber noch nicht ausprobiert.
Ich hoffe ich konnte euch helfen. -
my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4
If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
1) press and hold the power button until you see the slide to power off option
2) swipe to power off
3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
Hope this helps.
Cheers. -
ADVICE!!:Reading in a module of code and testing its complexity
Hi,
I'm very confused about coding this program.
I have to read in a text file of a module of java code and test its cyclomatic complexity. I can't use a parser because it has to run on networks which wouldnt allow it installed. It has to be made by the java jdk 1.1.8 API.
Things that are confusing me are as follows:
1)how to read the file in: I would read the file in line by line but I feel this could lead to problems with measuring the modules complexity.
i.e a do while statment.
2) how to measure the complexity. I have thought of several ways these are counting the braces(wouldnt work because many people dont use braces in one line if statements etc) Count the keywords for,while,do while,if is the other one.
I'd be grateful for any advice, i think im confusing myself quite a bit over something thats probably simple.
Thanks in advance,
ChrisHello Chris,
Check the below link (if you have not already done so) to alleviate some of your confusion.
http://www.sei.cmu.edu/str/descriptions/cyclomatic_body.html
As mentioned in the paper, you have to calculate the cyclomatic complexity by CC=E-N+p
All you have to do is rightly figure out how to calculate E,N and p
:D
Ironluca
Maybe you are looking for
-
I have read some of the posts and i found out that some of the Thinkpad users have the problem of unable to connect wireless network using Access Connection but not Window wireless network connection. For my case, i have connect the network with both
-
Hi, We are planning to upgrade Oracle and OS.Can anyone please tell whether the following oracle versions will be compatible with the OS specified 9.0.3.1on Solaris 8 and Solaris 9 9.2.0.6.0 on Solaris 8 and Solaris 9 9.0.3.0 on Solaris 8 and Solaris
-
Lost album artwork on my ipad2 how do I recover it?
Need help to recover on my IPad2 lost album art work?
-
Programmatically select a property
Hello, Is it possible to programmatically select a property for a FP object? Properties for which a value change is required are stored in a database (as are the values itself). I can't use a property node because the poperty to change is not fixed a
-
Windows 7 Beta installation issue- Disc not recognized??
Hello everyone, im trying to install windows 7 beta 1 x64 in boot camp. I downloaded the beta ISO from Microsoft and checked the SHA1 checksums to make sure they're ok. The disc burned fine in Disk utility I get this error "The installer disc could n