Code Style - Line Wrapping - JSPX files

JDeveloper 11.1.1.0.2
I've got my Line Wrapping Line Width set to 180 and this works for my Java code but not for my JSPX files, which continue to break at 80 columns. In previous releases of JDeveloper my JSPX code would also wrap at 180, but I cannot remember what I did to make that happen. Can anyone give me a hint?
Thanks, Mark

Hi Mark,
JDeveloper 11.1.1.0.2
when I set Tools / Preferences / Code Editor / Display / Right Margin Column to 180 my line is on the same position also in jspx files
regards,
Branislav

Similar Messages

JDeveloper settings - change the default code editor view for JSPx files

Hi, when you open a .JSPX or JSP page the editor opens in 'design' mode. Is there a way to change this default behavior and open in 'source' mode? I write the JSF/JSP pages editing code and every time I open a new page I have to wait till the IDE opens in view mode and then manually switch to source mode by hand.
Thanks
Jordi

A year and a half after this post, and I still have this same issue as well. Even 10.1.3.3 has it.
Thanks for posting the solution as this will now save me lots of time waiting and often re-starting JDeveloper.

Line wrapping and font styles?

Hi,
If I have a piece of text which I would like to see line wrapped, and font styled, how should I do that?
javax.swing.JTextArea has the capabilities to set line wrapping to on.
javax.swing.JTextPane has the capabilities to set font styles like bold, italic and so on.
But what if you have a piece of text you don't know the (possible) length of (so you would like to have line wrapping), AND to which you want to apply font styles to. JTextArea and JTextPane are siblings, not ancestors. So I can't use it. I have looked in the code to see if I could use pieces of code in my own program. But not luck.
Do you have a suggestion for me?
TIA,
Abel

camickr wrote:
JTextPane wraps by default. I'm not sure what your problem is.I did not know that JTextPane did wrap. And I could not find it in the documentation.
But thanks for the information!

Getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

Question
getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

/* stops annoying focus-selection boxes in FF3 */
*:active, object:focus, embed:focus
outline: none;
}

Code Style one character indent after a comment line

I have a problem with "Code Style" formatting undesirably. Any time I put a comment (//) line into my code the next line is indented one space. I can't find any setting in "Code Style" that alters this. I end up doing a lot of manual format editing to get rid of those spaces (the real problem is when I cut and paste a large block of code after a comment line - then the entire code block, every line, has that extra space of indenting).
Does anyone know how to alter this behavior?
This is with JDeveloper 10.1.3.3.

You can use an "indent to here" character before Diesel or set up your paragraph as follows
left indent 0.125" (or whatever)
first line indent -0.125"
You should use your existing paragraph style, too. No need for a new one the way you've described it.

Errors in rendered attribute of main jspx files generated code using JAG

I have been using JHeadStart in JDeveloper 10.1.3 Release 3 using the JHeadStart from the update site: http://files.oraclecorp.com/content/AllPublic/SharedFolders/JHeadstart%2010.1.3%20Preview-Public/center.xml
When using JAG on a HR project with 5 levels I get an error in Locations, Regions, Countries, Departments, Employees.jspx files
It generates the following:
rendered="#{!createModes.CreateEmployees ${JHS.addELExpression(${JHS.current.group.insertAllowedExpression},"and")}}"
I fix the "and" problem
rendered="#{!createModes.CreateEmployees ${JHS.addELExpression(${JHS.current.group.insertAllowedExpression},'and')}}"
Disassembling the above for better readability:
rendered=""
!createModes.CreateEmployees ${}
JHS.addELExpression()
${JHS.current.group.insertAllowedExpression},'and'
This should be legal code!?
It complains that it encountered a "(" where another character is expected
Replacing ${JHS.addELExpression(...)} with ${1} I get an error saying Expression Language is not supported for rendered attribute!?
Where do I go from here?
Thanx in advance :-D
PS: I am giving a Java community presentation tomorrow at noon with a JHeadStart demo, so it would be really cool with a fix ASAP ;)
Perhaps using the JHeadStart from local file would fix the problem!? I will give it a try...

This forum is intended for Oracle customers. Please use the Oracle internal mailing list [email protected]
Steven Davelaar,
JHeadstart Team.

Center text in a text component with line wrapping

I need to display dynamic text in a text component. I need line wrapping (on work boundaries) and also need horizontal and vertical center alignment.
How do I do this? I saw a previous post on aligning text in a JTextArea that said to use a JTextPane but I don't see in JTextPane how to do word wrapping.
Thanks,
John

// File:          SystemInfoWindow.java.java
// Classes:     SystemInfoWindow
// Package:     utilities.msglib
// Purpose:     Implement the SystemInfoWindow class.
//     Author:          JJB
//     Revision History:
//     Date            By   Rel# Description of change
//     ============= === ==== ===============================================
//     Jul 3, 2006   JJB 1.00 Original version
// Public Types / Classes          Type Description
// ========================     =============================================
//     SystemInfoWindow
package utilities.msglib;
import java.awt.BorderLayout;
import java.awt.Dimension;
import javax.swing.JDialog;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTextArea;
import javax.swing.JTextPane;
import javax.swing.SwingUtilities;
* TODO Enter description
class SystemInfoWindow extends JDialog {
      * @param args
     public static void main(String[] args) {
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    Test thisClass = new Test();
                    thisClass.setVisible(true);
                    SystemInfoWindow window = new SystemInfoWindow(thisClass);
                    window.setMessage("System shutdown in progress ... lot sof atatarte athis tis a sa logoint of tesxt it keeps going and going and going thsoreoiat afsjkjslakjs fshafhdskrjlkjsdfj");
                    window.setVisible(true);
     //     ------------------------ Inner Classes ---------------------
     static class Test extends JFrame {
          private JPanel jContentPane = null;
           * This is the default constructor
          public Test() {
               super();
               initialize();
           * This method initializes this
           * @return void
          private void initialize() {
               this.setSize(300, 200);
               this.setContentPane(getJContentPane());
               this.setTitle("JFrame");
           * This method initializes jContentPane
           * @return javax.swing.JPanel
          private JPanel getJContentPane() {
               if (jContentPane == null) {
                    jContentPane = new JPanel();
                    jContentPane.setLayout(new BorderLayout());
               return jContentPane;
     //     ------------------------ Static Fields ---------------------
     private static final long serialVersionUID = -8602533190114692294L;
     //     ------------------------ Static Methods --------------------
     //     ------------------------ Public Fields ---------------------
     //     ------------------------ Non-Public Fields -----------------
     private JPanel jContentPane = null;
     private JTextPane textField = null;
     public SystemInfoWindow(JFrame frame) {
          super(frame);
          initialize();
          //setUndecorated(true);
          setLocationRelativeTo(frame);
          pack();
     //     ------------------------ Interface Implementations ---------
     //     ------------------------ Public Methods --------------------
     public void setMessage(String text){
          textField.setText(text);
          adjustSize();
     //     ------------------------ Non-Public Methods ----------------
     private void adjustSize(){
          Dimension oldSize = textField.getPreferredSize();
          textField.setPreferredSize(new Dimension(
                    oldSize.width, oldSize.height + 30));
          pack();
     //     ------------------------ Generated Code --------------------
      * This method initializes this
      * @return void
     private void initialize() {
          this.setSize(300, 200);
          this.setModal(true);
          this.setContentPane(getJContentPane());
          this.addWindowListener(new java.awt.event.WindowAdapter() {
               public void windowOpened(java.awt.event.WindowEvent e) {
                    //setLocationRelativeTo(MsgLibGlobals.parent);
                    pack();
      * This method initializes jContentPane
      * @return javax.swing.JPanel
     private JPanel getJContentPane() {
          if (jContentPane == null) {
               jContentPane = new JPanel();
               jContentPane.setLayout(new BorderLayout());
               jContentPane.setMaximumSize(new java.awt.Dimension(50,2147483647));
               jContentPane.add(getTextField(), java.awt.BorderLayout.CENTER);
          return jContentPane;
      * This method initializes textField
      * @return javax.swing.JTextPane
     private JTextPane getTextField() {
          if (textField == null) {
               textField = new JTextPane();
               textField.setEditable(false);
               textField.setMaximumSize(new java.awt.Dimension(20,2147483647));
          return textField;
}Message was edited by:
BaltimoreJohn

Disable Line wrap in Terminal

How do you disable line wrap in bash? As in
$ls -la
or
mysql> select * from db;
displaying exceedingly lengthy data. Or perhaps readline options to disable wrapping?
May be just a horizontal scroll bar in Terminal?

Thanks for responding. I believe that setting is for input not output. Plus it is on. I think terminal needs a horizontal scrool bar.
$ bind -v
set bind-tty-special-chars on
set blink-matching-paren on
set byte-oriented off
set completion-ignore-case off
set convert-meta off
set disable-completion off
set enable-keypad off
set expand-tilde off
set history-preserve-point off
set horizontal-scroll-mode on
set input-meta on
set mark-directories on
set mark-modified-lines off
set mark-symlinked-directories off
set match-hidden-files on
set meta-flag on
set output-meta on
set page-completions on
set prefer-visible-bell on
set print-completions-horizontally off
set show-all-if-ambiguous off
set show-all-if-unmodified off
set visible-stats off
set bell-style audible
set comment-begin #
set completion-query-items 100
set editing-mode emacs
set keymap emacs

JDeveloper 11g breakpoints do not work in .jspx file.

Hi, there is an issue with the JDeveloper 11g debugger, running an ADF application with embedded WL server (JSF version - Trinidad).
It stops at the breakpoints in the .java file, but not in the .jspx files.
Any suggestions on configurations to check....
Currently:
-Generate Debug info is checked,
-precompile JSP is unchecked
-server and application are being ran in debug mode
Spent a lot of time already seeing similar posts but there is no meaningfull answer as to what configurations are responsible for the debugger.
Please do not waist your time or mine advising to reboot pc or re-install Jdev ;-)
Thank you

Hi John,
Thank you for your prompt response.
Here is a sample code with the breakpoint.
(breakpoint here)<tr:outputText value="Date of hire #{bk_editSalesRoleBean.salesRole.person.effective}">
<f:convertDateTime pattern="#{res['date.format.readOnly.display']}"/>
</tr:outputText>
It's a source line type breakpoint and the execution should be halted at it. I wanted to review value in the pattern reference in the convertDateTime tag.
Thanks,
Taras

How can I redirect in a jspx file?

Hi,
In a jspx file I want to redirect to other jspx file if a condition is true.
i have this source code, but it does not work on tomcat.:
<jsp:useBean id="BeanUsuario" class="bean.BeanUsuario"
type="bean.BeanUsuario" scope="session"/>
<jsp:setProperty property="opcion" name="BeanUsuario"
value="PagWebUsuarios"/>
<c:if test="${!sessionScope.BeanUsuario.blnOk}">
<jsp:scriptlet> response.sendRedirect("../faces/Login/login.jspx");</jsp:scriptlet>
</c:if>
This is the line: response.sendRedirect("../faces/Login/login.jspx");</jsp:scriptlet>.
thanks in advance.
Nelson Villamizar

Redirect with the jsp:forward tag.
http://java.sun.com/products/jsp/tags/11/syntaxref11.fm9.html

How can I return all line in a file that matches using regexp

Hi!
I want to return whole line from a file. This lines must to contains matches for a pattern.
How Can I do this.
I make some samples, but only return the matches segment of the line.
Sample code to look for 00:00
If I put .*00:00.* in the pattern this return whole line, but is to slow in this file about 300,000 lines.
If I put just 00:00 in the pattern only return the 00:00, but so fast.
What can I Do, or I must use indexOf in a sequential read?
          try {
               // Create matcher on file
               Pattern pattern = Pattern.compile(".*00:00.*");
               Matcher matcher = pattern.matcher(fromFile("logusers_0712"));
               // Find all matches
               while (matcher.find()) {
                    // Get the matching string
                    String match = matcher.group();
                                 //Here I display the matches
                    System.out.println(match);
          } catch (IOException e) {
               e.printStackTrace();
          }Thanks in advance

My two cents:
Grep is a Bad Idea (TM). It is not java and itties
es the solution to a the operational system.Not necessarily bad. Like you say--we don't know much
about the OP's requirements, so grep may be just
fine.
!java != badYour assertion is true. But creating an solution tied to the system when you can do it pure java does not seem like a good Idea especially when we not even know which system he is using. What if he is using Windows or MacOS? Sure he can use grep on non *nix systems, but that would fore him to install the necessary tools, making his solution even more complex.
>
About using indexOf, it is a little limited, not
ot knowing what exactly the OP is searching for itis
difficult to say if it is enough. RegEx would workin
both ways.He said he was searching for "00:00". I think that was just a sample. He apears to be scanning a log file as far as I understood. 00:00 could be a timestamp for whose he wants to see the entries. Using a RegEx make the job easier, like "01:\\d{2} am" to get the whole range of entries inside that morning hour.
If it's really
that literal string he needs to match, as opposed to
say "\\d\\d:\\d\\d" then indexOf is simpler. It will
probably perform better too. I don't know if that
difference will be significant, but on a file of
300,000 lines, it might be noticable.The only way to know that is testing both solutions. But you are right, we are just wondering here, with no better info on the requirements anything can go. I agree with you, indexOf is the simple way to go and probably will sufice.
May the code be with you.

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

Appending to new line in text file

I am trying to append text to a new line to a file. I set the append parameter to true and I try to output the new line character after I write the string to the file. However it is still appending the next string to the end of the first rather than in the line below. My code is below. Can someone please help me?
Thanks
public static boolean WriteToFile(String nameOfFile,
String contents)
FileWriter myFileWriter = null;
try
System.out.println("Attempting to write text to = " + nameOfFile);
myFileWriter = new FileWriter(nameOfFile,true);
myFileWriter.write(contents);
myFileWriter.write('\n');
myFileWriter.close();
return true;
catch (Exception e)
System.out.println("EXCEPTION thrown ");
return false;
}

I am trying to append text to a new line to a file.
I set the append parameter to true and I try to
o output the new line character after I write the
string to the file. However it is still appending the
next string to the end of the first rather than in
the line below. My code is below. Can someone please
help me?
Thanks
public static boolean WriteToFile(String nameOfFile,
String
String
String contents)
FileWriter myFileWriter = null;
try
System.out.println("Attempting to write
ting to write text to = " + nameOfFile);
myFileWriter = new
eWriter = new FileWriter(nameOfFile,true);
myFileWriter.write('\n');
myFileWriter.write(contents); myFileWriter.close();
return true;
catch (Exception e)
System.out.println("EXCEPTION thrown ");
return false;
try the change what i have made in bold

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

How to get the number of lines of a file?

Folks:
Is there a way to get the number of lines of a text file? I don't know if there is an existing method to do that.
Thanks a lot.

HI
I found some solution
other than increment loop and all
here is the code it might helpful to u
//returns the number of lines in a file
//author : Ravindra S
//Symphony software Hyderabad
try
RandomAccessFile randFile = new RandomAccessFile(csvFile,"r");
long lastRec=randFile.length();
randFile.close();
FileReader fileRead = new FileReader(csvFile);
LineNumberReader lineRead = new LineNumberReader(fileRead);
lineRead.skip(lastRec);
countRec=lineRead.getLineNumber()-1;
fileRead.close();
lineRead.close();
catch(IOException e)

Code Style - Line Wrapping - JSPX files

Similar Messages

Maybe you are looking for