Code Style one character indent after a comment line
I have a problem with "Code Style" formatting undesirably. Any time I put a comment (//) line into my code the next line is indented one space. I can't find any setting in "Code Style" that alters this. I end up doing a lot of manual format editing to get rid of those spaces (the real problem is when I cut and paste a large block of code after a comment line - then the entire code block, every line, has that extra space of indenting).
Does anyone know how to alter this behavior?
This is with JDeveloper 10.1.3.3.
You can use an "indent to here" character before Diesel or set up your paragraph as follows
left indent 0.125" (or whatever)
first line indent -0.125"
You should use your existing paragraph style, too. No need for a new one the way you've described it.
Similar Messages
-
Changes on code editor code style are not applied on restart
Jdeveloper 11.1.1.3.0
Tools > Preferences > Code Editor > Code style > Edit > Modify "Indentation Size" > OK > OK > Close Jdev > Open Jdev => modified "Indentation size" not applied.
Any solution?hi user474075
I have noticed something similar for which I have created service request 3-1764420131 ,
which resulted in bug 9740870 , "CODE STYLE USE TAB CHARACTER ISSUE"
for which "... We are waiting for the review process of the bug to be completed. ... "
So, if you can create your own service request (at http://support.oracle.com ) and refer to bug 9740870 that might speed things up.
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
regards
Jan Vervecken -
In Reader X, printing one character off
View of the doc is fine but intermittently starts printing one character off after 1 or 2 pages of good print.
Are you printing the PDF file from a web browser? Have you tried to Print PDF as image in the Reader print dialog?
-
Character Styles Panel not refreshing after adding character styles
Hello,
Anyone know how to get Illustrator's Character Styles panel to refresh after programatically adding new styles by calling CreateCharStyle()?
Currently, the user must save the document and reopen it in order for Illustrator to refresh the character style list within the UI. This is obviously not ideal.
You may replicate this issue in the sample code by executing the SnippetRunner Text Styles snippet and then executing the CreateCharacterStyle snippet. This sample code also successfully adds a new character style but fails to update the Character Styles panel within the UI.
One side note: The AIATECurrentTextFeaturesSuite has an Invalidate() method. I tried adding this call but it doesn't seem to have any impact.
Any help would be greatly appreciated.
Thanks,
PeterI'm seeing success with the Notification call in CS4 too; thanks. But not in CS5 (Windows). I still need to save the document to refresh the panel. And (in fact, probably due to this fact), while the new Style has appeared, none of the features (such as font size, leading) that I have added using NewCharStyle.SetFeatures(features) show up. Any clues? The code (basically copied from the SnipperRunner project) is identical between CS4 and CS5; I'm just building against the different SDKs.
DF -
Trouble nesting more than one Character Style...
I am trying to create the below heading in CS5 on a Mac:
Lesson 2.1: Who am I?
So I made the Lesson 2.1 a character style called "Lesson #." And then I made Who am I? a paragraph style called "Lesson title" and nested the "Lesson #" though 1 colon. And that worked great. But then I felt like the space between "Lesson #" and "Lesson Title" was too big. (This seems really nit-picky I know but the boxes the lesson titles need to fit in are small and the titles vary in length so I was trying to save all the space I could for the longer titles.)
Lesson 2.1: Who am I?
So I made the space (see the underline above) a character style of it's own that was the same as the "Lesson Title" in all aspects except that it was 11 pt font. I then made this a nested style in the "Lesson Title" that came after "Lesson #" through 1 letter.
But it doesn't seem to be working very well...which made me question if there was something else I needed to do in order to nest more than one character style? Or whether I should be even approaching this issue in this way....
Thank you for any thoughts on this!YES!!! IT WORKED! I think InDesign and I are now friends. All my styles are working! (knock on wood.)
Weird that the horizontal scaling would work though and not changing the font size? or maybe I jsut don't understand exactly how InDesign thinks yet... -
Find texts with more than one Character Style applied
Hi,
If you need to find - and replace/restyle - texts where more than one Character Style is applied - here is tool for you - for ID CS3 and ID CS4:
http://www.adobescripts.com/search.php?query=multi+findreplace+grep&action=results
You can define options for up to 8 characters - by using GREP expressions.
Script is only for PC platform.
robin
www.adobescripts.comNever tried with bullets but nested styles might work... I think you can chain two or more nested style, and then you can define first nested style to effect only first character, second nested style to next character and so on....
-
How to read from a text file one character at a time?
Hello
I wish to read from a text file in a for loop and that on every iteration i read one charachter and proceed to the next one.
can anyone help me?
Lavilava wrote:
I wish to read from a text file in a for loop and that on every iteration i read one charachter and proceed to the next one.
can anyone help me?
Some additional comments:
You really don't want to read any file one character at a time, because it is highly inefficient. More typically, you read the entire file into memory with one operation (or at least a large chunk, if the file is gigantic) and then do the rest of the operations in memory. One easy way to analyze it one byte at a time would be to use "string to byte array" and then autoindex into a FOR loop, for example.
Of course you could also read the file directly as a U8 array instead of a string.
Message Edited by altenbach on 06-10-2008 08:57 AM
LabVIEW Champion . Do more with less code and in less time . -
JDeveloper 11.1.1.3 (PS2)
We're using a code style with
-- Indentation Size = 4
-- Use Tab Character = Checked
-- Tab Size = 4
Every time we restart JDeveloper, my documents appear to be reformatted with a tab setting of 2, although the code style still says it's 4. I can reformat the document by going into Code Style, and clearing the Tab Checkbox. I then have to go back in and recheck it. Can someone please take a look?
Thanks,
TomThere appear to be bugs filed for this and related issues already (c.f. bug#9793235). They are marked as fixed in 11.1.2 or 11.1.1.4 (depending on the bug) - I guess you could file an SR and ask for a backport to 11.1.1.3
John -
Reading a string one character at a time
Hi,
I'm hoping you use SmallBasic for year 10 exam students at my school. But, I have found a problem I cannot solve.
I need to be able to read one character at a time from a string (txt file) and convert each char to its ACSII code.
How do to I read one char at a time from a string to enable processing?
Thanks for your help.
BazHere is an over the top solution that will display the Hex value of the character codes of every character in the file.
TextWindow.Write("Enter full file name: ")
filnam = TextWindow.Read()
contents = File.ReadContents(filnam) 'read the entire file
TextWindow.Clear()
TextWindow.WriteLine("File Name: " + filnam)
TextWindow.WriteLine("Offset: 0")
col = 0
row = 5
TextWindow.CursorLeft = col
TextWindow.CursorTop = row
For i= 1 To Text.GetLength(contents)
ch = Text.GetSubText(contents, i,1)
chVal = Text.GetCharacterCode(ch)
ConvertToHex()
TextWindow.CursorLeft = col
If chVal < 32 Then
TextWindow.Write(".")
Else
TextWindow.Write(ch)
EndIf
TextWindow.CursorLeft = 20 + 2 + (col * 3)
TextWindow.Write(Text.GetSubText(hexstr,1,2))
col = col + 1
If col = 8 Then
col = col + 1
EndIf
If col > 16 Then
col = 0
row = row + 1
If row > 20 then
TextWindow.CursorTop = 23
TextWindow.CursorLeft = 25
TextWindow.Write("< < < Press ENTER to Continue > > >")
TextWindow.Read()
TextWindow.Clear()
TextWindow.WriteLine("File Name: " + filnam)
TextWindow.WriteLine("Offset: " + i)
row = 5
EndIf
TextWindow.CursorTop = row
EndIf
EndFor
TextWindow.WriteLine("")
TextWindow.WriteLine("")
Sub ConvertToHex
HexValue[0] = "0"
HexValue[1] = "1"
HexValue[2] = "2"
HexValue[3] = "3"
HexValue[4] = "4"
HexValue[5] = "5"
HexValue[6] = "6"
HexValue[7] = "7"
HexValue[8] = "8"
HexValue[9] = "9"
HexValue[11] = "A"
HexValue[12] = "B"
HexValue[13] = "C"
HexValue[14] = "D"
HexValue[15] = "E"
val = chVal
hexstr = "h" 'Need to force Small basic to concatenate rather than add
While val > 0
hexPos = Math.Remainder(val, 16)
hexstr = HexValue[hexPos] + hexstr
val = Math.Floor(val / 16)
EndWhile
For hi = Text.GetLength(hexstr) To 2
hexstr = "0" + hexstr
EndFor
EndSub
Enjoy! -
Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?
Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter -
How do I display font one character at a time?
Right now the way I present my font is it all appears
instanenous. I don't know if this is even possible or not, but I
would like to find a way to have the font be displayed one
character at a time over the course of a variable amount of
seconds. For example, some of you might recognize this font
presentation from the game "Phoenix Wright" for the Nintendo DS:
Click
here
for example.
That is the font effect I'm trying to capture - where the
font is presented in a character by character fashion. Now
obviously I could achieve this by putting a new letter on every
frame, but let's be realistic - that's not the logical way to do
it. Does anyone know the code/options involved in making this font
display stylization logically possible? Bonus points if you know
how to make the characters mouths move with the sychronized font
and then stop once the text stops =).Place a dynamic textfield on your stage and label it myText.
In frame one place the following code,to increase the write
speed lower the value of 100 in the setinterval call:
myText.text="";
var dText="My text I want to display";
var dTmr=setInterval(ShowNextChar,100,0);
var cPos=0;
stop();
function ShowNextChar()
myText.text=myText.text+dText.substr(cPos,1);
cPos++;
if (cPos==dText.length) clearInterval(dTmr);
} -
Reading one character at a time
Hello
How can i read one character at a time from standard input (System.in) ?
I have tried to use
ir=new InputStreamReader(System.in)
ir.read().
But this method blocks until it gets a return key pressed before going forward
Any other solution?public static char readChar() {
int ch;
char r = '\0';
boolean done = false;
while (!done) {
try {
ch = System.in.read();
r = (char) ch;
if (r == '\r') {
System.out.println("Not a character. Please try again!");
System.in.skip(1);
done = false;
} else {
System.in.skip(2);
done = true;
} catch (java.io.IOException e) {
done = true;
return r;
Try this as an method and then use it..
This code will read will be in response untill you hit the return key but will take only the first character.... -
ExtendScript Illustrator - Change color of text one character at a time.
I'm trying to write code for ExtendScript ToolKit to target Illustrator. I've been writing in JavaScript, but am open to switching to AppleScript if needed. The goal of the code is to change the characters in a text box one by one to the color of the image behind that letter. The end goal is to have the color of the text create the image.
Basically, I select a character. And lets say that character is at 720x648 (in pixels) in a 24x36 in image. Then I detect the color in the image layer at that location. Then turn the selected character to that color.
I have encountered two problems, finding a way to have the script detect the color of the picture at a given location (ideally in pixels) and then change that one character to that color.
So far my code is this, with a color hard coded in for testing purposes since I haven't figured out the detection part yet.
if ( app.documents.length > 0 ) {
var doc = app.activeDocument;
//get text from textbox
var numChars = 0;
textArtRange = doc.textFrames[0].contents;
numChars += textArtRange.length;
//loop through to select characters one at a time
for (x=0; x<numChars; x++){
var selectChar=textArtRange.charAt(x)
doc.characterStyles.removeAll();
var charStyle=doc.characterStyles.add("NewOne");
var charAttr=charStyle.characterAttributes;
var detectedColor = new RGBColor(); //ideally the detected color would go here. But for now it is hard coded.
detectedColor.red = 242;
detectedColor.green = 51;
detectedColor.blue = 51;
charAttr.fillColor = detectedColor;
charStyle.applyTo(selectChar); // I got an error here: "Object expected".
}//end for loop
To detect the color, I tried using the following code, but it only works in Photoshop and even there I can't find a way to store that color the way I need to.
app.activeDocument.colorSamplers.removeAll();
var pixelLoc = [UnitValue(16) , UnitValue(16)];
var myColorSampler = app.activeDocument.colorSamplers.add(pixelLoc);
I have put in so many hours into this and just want to rip my hair out. Any help or guidance anyone can give would be SO appreciated! Thanks in advance!!!finding a way to have the script detect the color of the picture at a given location (ideally in pixels)
there's no native command to do this in illustrator,
I tried using the following code, but it only works in Photoshop.....
unless you get extremely lucky (working with matching Object names) photoshop code won't work in Illustrator.
a possible workaround, clip your text to your image, rasterize it, trace it, you might end up with a solid color per character, where you could read their color. -
ORA-12709: error while loading create database character set after upgrade
Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein -
my iMac keeps typing a minus sign. I switched my wireless keyboard for a plug in Windows keyboard, and it keeps typing this one character. I took the batteries out of the Mac keyboard, so that is not the problem. I am running Mac OS X 10.6.8. In parallels, I don't have any problem, just on the Mac platform.
tebasj wrote:
Thanks for your observation. I realize they are different versions, but when I use the "Software Update" menu, this is as far as it would update. Is there some way to update the iMac beyond what "Software Update" does? I've tried it several times.
Please Note.
Upgrading OSX 10.6.8 (Snow Leopard) to 10.8.3 (Mountain Lion) is not an update. It is a paid upgrade. Just as with 10.7 (Lion) you must purchase it from the App Store with yor Apple ID and install it after backing up your current computer state for safety.
Cheers
Pete
Maybe you are looking for
-
when I chose an email address directly, while using firefox browser, it triggers an overflow of tabs, numbering in the hundreds. It makes me have to force quit firefox and I lose whatever I may be doing online. this is consistent for some months and
-
What is default web access password for HP Laserjet P2055dn
I tried to logon to the printer's web access interface, but do not know the username and password. I need to know either the default username and password, or how to reset it to the default. Thanks,
-
Wireless connection lost in few seconds [solved]
Hi everyone just come back to Arch after one year. The community grown fast and support seems to be fantastic. Anyway, I have problems with my wireless connection. I installed the system from cd including ipw2200 driver (the right one for my card). I
-
HT204382 Opening wmv on OSX 10.8.3
Trying to open a wmv file on my mac air (OSX 10.8.3), it won't work and sends me to download flip for mac. But when I try to download "flip for mac" I get this message "Disk image couldn't be opened flip for mac 3.2.0.16 dmg not recognized."
-
Sharing Address book via Server generates duplicated groups.
Hi, I generated a user to share the addressbook within the company. While connecting works for all users, just as the second connects, all groups are duplicated. It does not happen every time, it seems, at least if the same user connects again it see