ColHdrString property of Multi-Column lisbox - Append Table to Report.vi not working - solution.
Solved an interesting problem today. Rather than stash somewhere on the laptop I'll post
here in hopes of being able to find it again next year Maybe save someone else some time, too.
Application with several similar multi-column listboxes, each of which has to be printed in a standard
report. Put each mc box on a tab, wire references array to a for loop in the print .vi. Print function
uses the ColHdrString property node to pull out the column headers to send to Append Table to Report.vi.
First 4 tables print properly, last 2 have no column headers. Property node is retrieving all correctly, no
errors propogated.
Turns out that the last 2 tables were copied from one of the first 4 but required fewer columns.
Unneeded columns were deleted. Apparently deleted columns, however, have their header
blanked, not deleted. ColHdrString property node was returning empty strings for the unused
columns and Append Table to Report.vi was internally generating errors but not passing them
out. Tables printed properly other than missing headers.
Solution was to delete and replace tables. Everything works fine now.
Matt
Easier than replacing the table is to use property nodes to retrieve the corrupt header list,
delete from array to correct it, and a property node to put it back. Once a table is corrected
it stays corrected so this snippet can be deleted after running once.
Matt
Similar Messages
-
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava ChunduriHi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava -
Passing multi value parameter to the Drill through report
Hi
I have two reports say Report A and Report B.
Both reports using same parameters.
I am Navigating from Report A to Report B using Jump to Report option.
Now when I pass multiple parameter to the Report B it only displays first parameter results.
In report B I have parameter multi value select to true.
I would like to know if its possible or not to pass multi value parameter in drill through report?
I would appreciate if someone can help me here.
Regards
AmitYes you can pass multi value parameters to a drill through report.
It works similar to multi value parameters for subreports, which is discussed in detail in this thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=163803&SiteID=1
-- Robert -
Append table with multi-line cells to word report
Hi,
I am using LabView 7.0. I need to append table to word report and I am using Append Table to Report VI. My VI works fine as long as the table cells do not have multiple lines. For multiple lines, each line is put is a seperate cell in the word report.
Is there a way to append multi-line cells to Word Report??? If not, any suggestions on how I can copy the multi-line table to Word report???
Please kindly help!!
Please see the attached document for details on the problem.
Thanks,
Mim
Attachments:
Table with multiple line cells.doc 33 KBHi Mim,
Yes I understood the multiple-lines part. I think the doc is the report you want. Correct ?
The doc is generated with your VI without any modifications.
I am using XP, Office 2002 SP3 and LV7.1
Attachments:
Verification Report.doc 39 KB -
Result Type Condition for Multi value Manage Property not working
Hi All,
I have created one template & I wanted to show this template on particular condition. So I created the result type. The Managed property (MP) that I used, I have verified its attributes all attributes are selected and its type is Multi value. I am trying
to apply the "Show fewer conditions" and some how the value not matched.
I have checked MP ; it has all the values but some how the template not called. When I removed this condition it working and when choose other MP other then Multi valued. It is working as expected.
Please let me know if i miss something here.
PS: I have checked each option from the Query drop down like "Equals any of" and "Contains any of" not working in case of multi value attribute. Please help.
I have explain this issue more details in this post : http://sharepointfordeveloper.blogspot.com/2015/02/sharepoint-search-2013-result-type-with.html
Regards,
Basant Pandey
http://sharepointfordeveloper.blogspot.comUpdate on above mentioned issue.
I have verified the same at my end. So I come to this conclusion this is product issue. Either need to raise the ticket to Microsoft related to this issue.
Regards,
Basant Pandey
http://sharepointfordeveloper.blogspot.com -
Pagination using table growing property and multi-select table issues
Hi,
We're using the growing property on a table, thus the pagination is handled by the control it self.
However, if we want to update some item in the table, in order to get those details reflected, we're refreshing the model, which is performance intensive.
Is there any way we can update the UI only without creating any UI inconsistencies?
Another question is that, is there any way to disbale the checkbox on the table items, based on some property from the backend. we tried to use editable property, but it hides the entire row.
We need to disable the checkbox on the rows for particular items?
Also, I need to know any resources on the mobile library where I can find the CSS related documentaion.
Like we need to create a icon + text structure, which controls should be ideal to use? I have used
<HBox><Icon src="abc"/><Text text="abc"/></Hbox>, but it creates alignment issues. Any ideas here?
Thanks!
Aamir855354 wrote:
We are implementing pagination in our application and comparing the scrollable result set approach with using ROWNUM provided by oracle.The rownum approach scales better.
Does this literrally mean that Oracle stores all the records in client-side memory cache? Well if it is scrollable it has to store all the rows somewhere, that is the disadvantage.
Can we use fetchSize attribute or any other work around to limit the number of records in client-side memory?No. If you want that behavior that is how the rownum approach works.
In the above case, when MAX_ROW_TO_FETCH is a large number (say 50000), then oracle will have to create a temporary table in memory with all the 50000 records and then will fetch from that table required records as per MIN_ROW_TO_FETCH.No, that is not how it works, where did you read that?
In this case, reading rest of the records and storing in temporary in memory table will impact performance. Is my understanding correct or i am missing something here?Your understanding is not correct. The rownum approach does not work the way you think and behaves more like the way you want the scrollable result set to work. -
SubVI with while loop + event structure not working in multi tab VI
Hello Everyone,
I am developing an interface for the control of a prober using Labview 2012, and I am stuck with some issue.
To start with I provide you with a simplified version of my control interface VI, and with the sub-VI used to build and manage the wafer maps.
The VI consists of several tabs: Prober Initialization, Wafer Handling, Wafer Map, Status, Error.
The sub-VI can:
1/ initialize the grid to display the map (sub VI Init Grid not provided here)
2/ import XY coordinates from a txt file (sub VI Wafer Map Import)
3/ display the coordinates and index of the die below the cursor
4/ and when a die position is double clicked, and the boolean "Edit Wafer Map" is true, then the user can change the state (color) of the die between On-wafer die and Selected Die
My issue:
If I use the sub-VI by itself, it works fine. However when I use it as a sub-VI in the tab "Wafer Map", the map does not build up and I can no further use the embedded functionalities in the sub-VI.
I suspect the while loop + event structure of the sub-VI to be the bottleneck here.
However I don't know which way to go, that's why I'd be glad to have some advice and help here.
Thank you.
Florian
Solved!
Go to Solution.
Attachments:
Control Interface.zip 61 KBHi NitzZ,
Thank you for your reply.
I tried to save the VIs in LV10, please tell me if you can open them now.
Inside he event structure there is quite some code, and since I don't want to make the main vi too bulky, I would like to keep it as a sub-VI.
As you can see from the sub-VI, the event structure is used for extracting cursor position and tracking the double click action. These events are linked, through a property node, to the image "Wafer Map" which is passed to the main vi through connector pane.
All values are passed this way as well (through connector pane). Is there another way?
Maybe "refnum", but I don't really understand how to use them...
If I use the event structure in the main vi, the wafer map is still not working. I tried it earlier.
To implement the multi tab front panel, I used a tab control, and a for loop + case structure. For each element of the case structure, there is a corresponding action.
For the case where I put the code (element=2) for Wafer Map, I also control the execution of the code with a case structure activated by the button "REFRESH". Otherwise I end up with a freezing of the panel right after the start.
I hope these comments help you understand better.
Regards,
Florian
Attachments:
Control Interface.zip 104 KB -
New 500 GB DVR Multi Room Not working!
I received the new 500 GB DVR this past Friday and set it up over the weekend. I'm having issues with viewing the new content on the new DVR with other STBs.
I've tried rebooting all the boxes and unplug each one but still get the same message that There was error connecting to the DVR STB. It's almost like the boxes are trying to still access the previous DVR. I tried to submit to Verizon Support on Twitter and it's been 3 days without hearing back if they had a solution. They tell me the same cut and paste message they give everyone to DM them on Twitter and here is the link to the form but then you don't hear back at all.
Has anyone else experienced issues with the new 500 GB DVR and Multi Room access?
Solved!
Go to Solution.I switched from a 7216 MR-DVR to a 7232 and had tech support switch the MR feature to the new box, and have no problems. The STBs and DVRs talk to each other on their own little MoCA network. COAX or splitter issues can cause problems. Router not involved. I have MRDVR running and all routing functions are turned off on the Actiontec, and the the WAN ports are not even connected. The Actiontec is bridge LAN to MoCA. My router is a Linux box. The Actiontec does filter STB broadcast traffic from my LAN. It sees no MoCA traffic except for VOD and guide updates. All other UDP broadcast traffic is blocked on the bridge.
The hub errors people were seeing on the older 1.7 img were not HUB as in router related. The hub acts as the master on the MoCA network. Looking at the STB diagnostic menu D16 for "Connected Home" my DVR shows as the hub and is verified by the MAC address my Linux box assigns an IP address to. If you are having Multi Room DVR issues I can almost guarantee that it is not a router issue. Check and make sure you have good quality RG-6 coax and the proper splitter(s). Make sure there is no line loss or interference between the boxes. Also make sure Multi Room is assigned properly only to the DVR wanting to be the Multi Room DVR. It can not be assigned to more than one DVR. Now with the 1.9 image the rules may change, but I am not sure. Right now it is my understanding that only one DVR can be the HUB. Now that may be changing, we will need to wait and see. I believe it will change.
Now back to removing the old DVR and having Multi Room Enabled on your new DVR. You may want to have both DVRs connected so the feature can be disabled on the old DVR and enabled on the new. If you do not do this and reconnect the old DVR you may end up with two trying to act as HUBs. May not work well with 1.8. Not saying I know for sure, and my assumptions are only based on observations. But when I had Multi Room moved from old to new, both my DVRs were connected, and my system works great. -
Multi gestures not working on iPad Air ios8 onwards
Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?
MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
ITs it's almost like they don't care
come on Apple sort this out !! It's been too long -
Multi scanner software not working after E71 FW U...
Multi scanner software not working after E71 FW Update to 3.1
Nice bit of trouble-shooting. Thanks for sharing the final solution.
-
After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBACI downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!) -
I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
hello,
I have 2 lab tops.. and have family members that use them.. I used to have FB open with mult family members accounts. Ad of today you updated to firefox 15..
Now when I go to use multifox 1.3.3 ( that is so you can have mult accounts open. ) .. if trying to go into Fb none of the features work. now since I have upgrade. it use to work fine.
So, the new FF does not work would like to unistall and go back to the old FF.. where I, can have mult accounts open at the same time and have the funcation work when your on the mult account in FB... Like talk to some one in FB chat. or just look at other items in the accounts.
if you can tell me how to fix this or can you please give me the old link back.. or tell me how to get the old link back instead of 15.. Because 15 does not work.
ThanksInstall or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.
The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.
-
Multi room dvr not working in other rooms
My mr dvr is not working in any of my other rooms. It has never worked. I just don't have the time to sit on the phone with tech support.
I have 3 other sd stb in other rooms and I have programs recorded on the dvr that are not in H. So shouldn't i be able to watch these in the other rooms?
When I look at my Fios TV info online it states this "Your STB record cannot be found."
any help would be appreciated
Solved!
Go to Solution.It is listed on my bill under TV additional services. " home media dvr- high definition" is this just for the actual DVR unit? Do I have to pay for the unit and then pay an additional amount for special programing? If so why wouldn't I have opted for the regular DVR instead of the Multi room dvr? I guess I will be spending most of my night on the phone with verizon!!!!
thanks for your help.
Maybe you are looking for
-
How to make a block as invisible at SSCRN Output ?
Hello All, I have 3 Blocks on my SSCRN and I have 2 Radio Buttons. I want to make 2 Blocks as Invisible when one of the radio button is selected. Can any one tell me how to do so ? Regards, Deepu.K
-
Hi! I need to make a downloadable page out of a stream (or byte array - it doesn't matter) with a content of any type (e.g. a csv file or a binary file). I would like to make a link on a page which whould trigger an event. In the event handler I woul
-
MobileMe Preference Pane: Sync tab. MAJOR ISSUE.
this is absolutely killing me. System Preferences-> MobileMe [ok, that works fine] click the tab for Sync... spinning beach ball of death. i have to force quit System Prefs every time. somewhat related, my address book has become all fubar. duplicate
-
My lightroom basic settings are set, and not zero'd out. How do I fix it
When I import photos, some of my sliders are already set. I want them in the middle so I can adjust. Specifically shadows and highlights are set to extremes. How do I correct this?
-
How do i get office on my ipad?
does knowabout downloading officeto an ipad? is it avaialble? i need tocreat word and excel docs?