Collection of items for searching

I have number of items.
An item has:
- option 1 and price 1
- option 2 and price 2
I want to have a collection to store these items so I can
- get a price base on itemId and option
- get all prices base on itemId
- get all prices based on option (1 or 2)
At the moment, I use List<String[3]> to store these items and go through the list to search. It is slow...
I want to use Map but map only stores key and value but I have three values
Any suggestion, please ...
Many thanks

I have number of items.
An item has:
- option 1 and price 1
- option 2 and price 2From your description an item also has an id.
Create an Item class which groups together the id and both prices. Instances of this class can then be used in collections: as the values of a Map, or the elements in a List etc.

Similar Messages

Personnel Cost Planning: creating cost item for Org unit

Hi experts,
I am trying to attach a cost item to an org unit by maintaing feature hcp02 but the somehow the cost item applies itself to both org unit and position. Could anyone please let me know the how this can be done?
Thanks

It is extremely difficult to answer your question without knowing all the details of your scenario.
I can briefly explain the scenario I used:
1. I have maintained IT1005 on job level to further distribute this information along the organization structure.
2. First of all i had to run data collection on job level using method "Infotype planned compensation: 1005" and cost item that was a base for other items, e.g. basic salary. System creates records in infotype 5010 "Planning of Pers. Costs" for evaluated jobs.
3. Then I collected cost items for positions using method "Data from related cost planning objects", calculation type A, basis that I previously set up, evaluation path O_O_S_C (I started from head org.unit) and object type source C. I did it for positions to have possibility to adjust cost items on position level using transaction PHCPDCUI - Edit Data, e.g. you can ask managers to review your defaults on position level before staring consolidation on org.unit level.
4. Then you start data collection on org.unit level using cost items on position level. Process similar to step 3 but with different evaluation path and source object.
5. When it's done you run cost planning (PHCPADMN - Manage) using special plan for planning based on OM data.
There are plenty of other scenarios, so can't really give you exact answer on your question, as I don't which scenario you use.

Report to find open items and close items for given vendor

Hi All,
What are the steps needed to write a REPORT to find out
open and close items for a given vendor.
Which are the fields i'll have to take and what are the comparisons i'll have to make.
I know,
BSIK is for open Vendor &
BSAK for closed Vendors..
what are the conditions i'll have to check.
Thanks in Advance..
Pradeep Alex

Hi Pradeep,
This report I developed is definitely useful to you.
*& Report ZFI_PROV_IT_VENDOR
REPORT ZFI_VENDOR.
TYPE-POOLS: slis.
tables: BKPF,
        BSEG,
        bsik,
        bsak,
        bsid,
        bsad,
        lfa1,
        t005u,           "Region Description
        J_1IMOVEND.
TYPES: BEGIN OF ty_bkpf,
        bukrs type bkpf-bukrs,
        belnr TYPE bkpf-belnr,
        gjahr type bkpf-gjahr,
        blart TYPE bkpf-blart,
        budat TYPE bkpf-budat,
       END   OF ty_bkpf.
types: begin of ty_J_1IMOVEND,
         lifnr     type lfa1-lifnr,
         J_1IPANNO type J_1IMOVEND-J_1IPANNO,
         J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
         J_1ISERN type J_1IMOVEND-J_1ISERN,
       end   of ty_J_1IMOVEND.
TYPES: BEGIN OF ty_bseg,
        belnr TYPE bseg-belnr,
        gjahr type bseg-gjahr,
        bschl TYPE bseg-bschl,
        umskz type bseg-umskz,
        shkzg type bseg-shkzg,
        wrbtr TYPE bseg-wrbtr,
        hkont type bseg-hkont,
        lifnr TYPE bseg-lifnr,
       END   OF ty_bseg.
types: begin of ty_t005u,
        bland type t005u-bland,
        bezei type t005u-bezei,
       end   of ty_t005u.
types: begin of ty_lfa1,
        lifnr type lfa1-lifnr,
        name1 type lfa1-name1,   "35
        ort01 type lfa1-ort01,   "35
        ort02 type lfa1-ort02,   "35
        pfach type lfa1-pfach,   "10
        pstlz type lfa1-pstlz,   "10
        regio type lfa1-regio,   "3
        stras type lfa1-stras,   "35
        ktokk type lfa1-ktokk,
        telf1 type lfa1-telf1,   "16
        telf2 type lfa1-telf2,   "16
       end   of ty_lfa1.
types: begin of ty_bsik,
        bukrs type bsik-bukrs,
        lifnr type bsik-lifnr,
        augdt type bsik-augdt,
        augbl type bsik-augbl,
        belnr type bsik-belnr,
        budat type bsik-budat,
        blart type bsik-blart,
        shkzg type bsik-shkzg,
        wrbtr type bsik-wrbtr,
       end   of ty_bsik.
types: begin of ty_bsid,
        bukrs type bsid-bukrs,
        lifnr type bsid-kunnr,
        augdt type bsid-augdt,
        augbl type bsid-augbl,
        belnr type bsid-belnr,
        budat type bsid-budat,
        blart type bsid-blart,
        shkzg type bsid-shkzg,
        wrbtr type bsid-wrbtr,
       end   of ty_bsid.
types: begin of ty_out2,
        lifnr type bsik-lifnr,
        wrbtr type bsik-wrbtr,
        end of ty_out2.
types: begin of ty_out,
        lifnr type lfa1-lifnr,
        name1 type lfa1-name1,
        addr(162) type c,
        J_1IPANNO type J_1IMOVEND-J_1IPANNO,
        J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
        J_1ISERN type J_1IMOVEND-J_1ISERN,
        opbal type bseg-wrbtr,
        purch type bseg-wrbtr,
        PAYM type bseg-wrbtr,
        grdeb type bseg-wrbtr,
        othdeb type bseg-wrbtr,
        othcre type bseg-wrbtr,
        tds   type bseg-wrbtr,
        bal   type bseg-wrbtr,
        blart type bkpf-blart,
        bschl type bseg-bschl,
       end of ty_out.
types: begin of ty_bsegtemp,
        lifnr TYPE bseg-lifnr,
       end   of ty_bsegtemp.
types: begin of ty_bsegnew,
        wrbtr TYPE bseg-wrbtr,
        lifnr TYPE bseg-lifnr,
       end   of ty_bsegnew.
data: it_bsik type table of ty_bsik with header line,
      it_bsid type table of ty_bsid with header line,
      it_bsak type table of ty_bsik with header line,
      it_out2 type table of ty_out2 with header line,
      it_out3 type table of ty_out2 with header line.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
       it_listheader TYPE slis_t_listheader,
       it_alvevent TYPE slis_t_event,
       gt_events TYPE slis_t_event WITH HEADER LINE.
DATA: I_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA : wa_fieldcat TYPE slis_fieldcat_alv,
       wa_listheader TYPE slis_listheader,
       wa_alvevent TYPE slis_alv_event.
DATA: WA_SORT TYPE SLIS_SORTINFO_ALV.
DATA: ls_line TYPE slis_listheader.
DATA : g_repid LIKE sy-repid,                  " Program ID
       g_layout TYPE slis_layout_alv.           " Layout Workarea
DEFINE m_fieldcat.
wa_fieldcat-col_pos       = &1.               " Fieldcat column postion
wa_fieldcat-fieldname     = &2.               " Field name
wa_fieldcat-DO_SUM        = &3.
wa_fieldcat-seltext_m     = &4.               " Column Text
wa_fieldcat-outputlen    = &5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
END-OF-DEFINITION.
DATA: wa_lfa1 TYPE ty_lfa1,
      wa_bkpf TYPE ty_bkpf,
      wa_bkpf1 type ty_bkpf,
      wa_bsegtemp type ty_bsegtemp,
      wa_bsegnew type ty_bsegnew,
      wa_bsegnew1 type ty_bsegnew,
      wa_J_1IMOVEND type ty_J_1IMOVEND,
      wa_t005u type ty_t005u,
      wa_bseg TYPE ty_bseg,
      wa_out    TYPE ty_out.
DATA: gt_out TYPE STANDARD TABLE OF ty_out,
      gt_out1 TYPE STANDARD TABLE OF ty_out,
      gt_lfa1 TYPE STANDARD TABLE OF ty_lfa1,
      gt_bsegtemp type standard table of ty_bsegtemp with header line,
      gt_bsegnew type standard table of ty_bsegnew with header line,
      gt_bsegnew1 type standard table of ty_bsegnew with header line,
      gt_J_1IMOVEND type standard table of ty_J_1IMOVEND,
      gt_bkpf1 TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE,
      gt_t005u type standard table of ty_t005u,
      gt_bseg TYPE STANDARD TABLE OF ty_bseg WITH HEADER LINE,
      gt_bkpf TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
select-options: s_budat for bkpf-budat obligatory,
                s_ktokk for lfa1-ktokk obligatory.
               s_wrbtr for bseg-wrbtr.
parameters: p_bukrs type bkpf-bukrs obligatory default '1000'.
           p_gjahr type bkpf-gjahr obligatory.
           p_lifnr type bseg-lifnr obligatory default '300040',
           p_ktokk type lfa1-ktokk obligatory default 'Z200'.
selection-screen end   of block b1.
START-OF-SELECTION.
PERFORM sub_fetch_data.
PERFORM sub_process_data.
END-OF-SELECTION.
PERFORM sub_build_fieldcat.
PERFORM sub_build_layout.
PERFORM eventtab_build USING gt_events[].
PERFORM comment_build USING it_listheader[].
PERFORM sub_disp_data.
*&      Form SUB_BUILD_FIELDCAT
      text
--> p1        text
<-- p2        text
FORM sub_build_fieldcat .
sort gt_out by name1.
*DEFINE M_SORT.
   ADD 1 TO WA_SORT-SPOS.
   WA_SORT-FIELDNAME = &1.
   WA_SORT-UP        = 'X'.
   WA_SORT-SUBTOT    = &2.
   APPEND WA_SORT TO I_SORT.
END-OF-DEFINITION.
*m_sort 'NAME1' 'X'.
*M_SORT 'ADDR' 'X'.
m_fieldcat 1 'LIFNR' ' ' text-026 10.
m_fieldcat 2 'NAME1' ' ' text-006 35.
m_fieldcat 3 'ADDR' ' ' text-007 162.
m_fieldcat 4 'J_1IPANNO' '' text-008 40.
m_fieldcat 5 'J_1ICSTNO' '' text-009 40.
m_fieldcat 6 'J_1ISERN' '' text-010 40.
m_fieldcat 7 'OPBAL' '' text-011 18.
m_fieldcat 8 'PURCH'    '' text-012 18.
m_fieldcat 9 'PAYM' '' text-013 18.
m_fieldcat 10 'GRDEB' '' text-014 18.
m_fieldcat 11 'OTHDEB' '' text-020 18.
m_fieldcat 12 'OTHCRE' '' text-021 18.
m_fieldcat 13 'BAL' '' text-023 18.
m_fieldcat 14 'TDS' '' text-022 18.
ENDFORM.                    " SUB_BUILD_FIELDCAT
*&      Form SUB_BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
FORM sub_build_layout .
g_layout-zebra             = 'X'.
g_layout-colwidth_optimize = 'X'.
ENDFORM.                    " SUB_BUILD_LAYOUT
*&      Form EVENTTAB_BUILD
      text
     -->P_GT_EVENTS[] text
FORM eventtab_build USING    gt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
ENDFORM.                    " EVENTTAB_BUILD
*&      Form COMMENT_BUILD
      text
     -->P_IT_LISTHEADER[] text
FORM comment_build USING    p_it_listheader TYPE
                                        slis_t_listheader.
data: v_text(30) type c,
      v_datelow(10) type c,
      v_datehigh(10) type c,
      v_month(2) type c,
      v_day(2) type c,
      v_year(4) type c.
v_day = s_budat-low+6(2).
v_month = s_budat-low+4(2).
v_year = s_budat-low+0(4).
concatenate v_day '.' v_month '.' v_year into v_datelow.
clear: v_day,v_month,v_year.
v_day = s_budat-high+6(2).
v_month = s_budat-high+4(2).
v_year = s_budat-high+0(4).
concatenate v_day '.' v_month '.' v_year into v_datehigh.
clear: v_day,v_month,v_year.
concatenate 'From' v_datelow 'To' v_datehigh into v_text
                                    separated by space.
clear: v_datelow, v_datehigh.
ls_line-typ = 'H'.
ls_line-info = text-116.
APPEND ls_line TO p_it_listheader.
ls_line-typ = 'S'.
ls_line-key = text-090.
ls_line-info = v_text.
APPEND ls_line TO p_it_listheader.
ENDFORM.                    " COMMENT_BUILD
*&      Form TOP_OF_PAGE
      text
--> p1        text
<-- p2        text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_listheader.
ENDFORM.                    " TOP_OF_PAGE
*&      Form SUB_DISP_DATA
      text
--> p1        text
<-- p2        text
FORM sub_disp_data .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = g_repid
      it_fieldcat        = it_fieldcat[]
      is_layout          = g_layout
      i_save             = 'U'
      it_events          = gt_events[]
    IT_SORT             = I_SORT[]
    TABLES
      t_outtab           = gt_out1[].
ENDFORM.                    " SUB_DISP_DATA
*&      Form sub_fetch_data
      text
--> p1        text
<-- p2        text
form sub_fetch_data .
select bukrs
       belnr
       gjahr
       blart
       budat
       from bkpf
       into table gt_bkpf
       where budat in s_budat
       and   bukrs = p_bukrs
      and   gjahr = p_gjahr
       and   blart in ('KR','KG','KZ','RE','DK','Z1','AB','SA','KA','DZ').
select belnr
       gjahr
       bschl
       umskz
       shkzg
       wrbtr
       hkont
       lifnr
       from bseg
       into table gt_bseg
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and   gjahr = gt_bkpf-gjahr
      and gjahr = p_gjahr
       and   bschl in (21,25,29,31,50,39,38,19,35).
      and kunnr in gt_
      and lifnr = '0000300019'.
select belnr
       gjahr
       bschl
       umskz
       shkzg
       wrbtr
       hkont
       kunnr
       from bseg
       appending table gt_bseg
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and   gjahr = gt_bkpf-gjahr
      and gjahr = p_gjahr
       and   bschl in (21,25,29,31,50,39,38,19).
break manukapur.
sort gt_bseg by lifnr bschl.
delete adjacent duplicates from gt_bseg comparing all fields.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
move: wa_bseg-lifnr to wa_bsegtemp-lifnr.
      append wa_bsegtemp to gt_bsegtemp.
      endif.
endloop.
delete adjacent duplicates from gt_bsegtemp comparing lifnr.
select lifnr
        name1
        ort01
        ort02
        pfach
        pstlz
        regio
        stras
        ktokk
        telf1
        telf2
        from lfa1
        into table gt_lfa1
        for all entries in gt_bseg
        where lifnr = gt_bseg-lifnr
        and ktokk in s_ktokk.
       and lifnr = '0000300030'.
select bland
        bezei
        from t005u
        into table gt_t005u
        for all entries in gt_lfa1
        where bland = gt_lfa1-regio
        and land1 = 'IN'
        and spras = sy-langu.
select lifnr
       J_1IPANNO
       J_1ICSTNO
       J_1ISERN
       from J_1IMOVEND
       into table gt_J_1IMOVEND
       for all entries in gt_bseg
       where lifnr = gt_bseg-lifnr.
*select bukrs
      belnr
      blart
      budat
      from bkpf
      into table gt_bkpf1
      where budat < s_budat-low.
      and zfdbt < s_budat-low.
select
       wrbtr
       lifnr
       from bseg
       into table gt_bsegnew
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and xopvw = 'X' .
      and zfbdt < s_budat-low.
select bukrs
       lifnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsik
       into table it_bsik
       for all entries in gt_bseg
       where lifnr = gt_bseg-lifnr
      and   lifnr = '0000300000'
       and   bukrs = '1000'
       and   budat <= s_budat-low.
select bukrs
       lifnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsak
       appending table it_bsik
       for all entries in gt_bseg
       where bukrs = '1000'
       and   lifnr = gt_bseg-lifnr
      and   lifnr = '0000300000'
       and   budat <= s_budat-low
       and   augdt > s_budat-low.
select bukrs
       kunnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsid
       into table it_bsid
       for all entries in gt_bseg
       where bukrs = '1000'
       and   kunnr = gt_bseg-lifnr
      and   kunnr = '0000300000'
       and   budat <= s_budat-low.
select bukrs
       kunnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsad
       appending table it_bsid
       for all entries in gt_bseg
       where bukrs = '1000'
       and   kunnr = gt_bseg-lifnr
      and   kunnr = '0000300000'
       and   budat <= s_budat-low
       and   augdt > s_budat-low.
if it_bsid[] is not initial.
append lines of it_bsid to it_bsik.
endif.
*delete gt_bsegnew where lifnr <> '0000300000'.
*break manukapur.
*sort gt_bsegnew by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*collect wa_bsegnew into gt_bsegnew1.
*endloop.
loop at it_bsik .
it_out2-lifnr = it_bsik-lifnr.
*it_out1-budat = it_bsik-budat.
*it_out1-blart = it_bsik-blart.
if it_bsik-SHKZG = 'H'.
it_out2-wrbtr = it_bsik-wrbtr.
else .
it_out2-wrbtr = it_bsik-wrbtr * -1.
endif.
append it_out2.
clear: it_out2, it_bsik.
*endif.
*clear it1.
endloop.
sort it_out2 by lifnr.
loop at it_out2.
it_out3-lifnr = it_out2-lifnr.
it_out3-wrbtr = it_out2-wrbtr.
collect it_out3.
clear: it_out3, it_out2.
endloop.
endform.
*&      Form sub_process_data
      text
--> p1        text
<-- p2        text
form sub_process_data .
*sort gt_bsegtemp by lifnr .
sort gt_bseg by lifnr bschl.
sort gt_bsegnew by lifnr.
sort it_out3 by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*at end of lifnr.
*sum.
*endat.
*endloop.
sort gt_bkpf by blart.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
read table gt_lfa1 into wa_lfa1 with key lifnr = wa_bseg-lifnr.
move: wa_lfa1-name1 to wa_out-name1,
     wa_lfa1-lifnr to wa_out-lifnr.
read table gt_t005u into wa_t005u with key bland = wa_lfa1-regio.
concatenate wa_lfa1-stras ',' wa_lfa1-ort01 ','
            wa_lfa1-ort02 ',' wa_t005u-bezei ','
            wa_lfa1-pfach ','
            wa_lfa1-pstlz ',' 'Ph:'
            wa_lfa1-telf1 ','
            wa_lfa1-telf2
            into wa_out-addr separated by space.
read table gt_J_1IMOVEND into wa_J_1IMOVEND with key lifnr = wa_bseg-lifnr.
move: wa_J_1IMOVEND-J_1IPANNO to wa_out-J_1IPANNO,
      wa_J_1IMOVEND-J_1ICSTNO to wa_out-J_1ICSTNO,
      wa_J_1IMOVEND-J_1ISERN to wa_out-J_1ISERN.
      read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 31 or
wa_bkpf-blart = 'KR' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KR' and wa_bseg-bschl = 50.
*wa_out-tds = wa_out-tds + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr * -1.
endif.
endif.
*wa_out-tds = wa_bseg-wrbtr.
endif.
if wa_bkpf-blart = 'KG' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 25
*or wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29
**and wa_bseg-umskz = 'A'
or wa_bkpf-blart = 'SA' and wa_bseg-bschl = 25.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DK' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'SA' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 38.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DZ' and wa_bseg-bschl = 19
and wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 39
and wa_bseg-umskz = 'G' or
       wa_bseg-umskz = 'H' or
       wa_bseg-umskz = 'J' or
       wa_bseg-umskz = 'L' OR
       wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 35.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if ( wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29 )
   and wa_bseg-umskz = 'A' or
       wa_bseg-umskz = 'B' or
       wa_bseg-umskz = 'I' or
       wa_bseg-umskz = 'M' or
       wa_bseg-umskz = 'O' or
       wa_bseg-umskz = 'V'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21 .
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
**if wa_bseg-shkzg = 'H'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr.
**else.
**if wa_bseg-shkzg = 'S'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr * -1.
**endif.
**endif.
**endif.
***if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
      wa_out-othdeb = wa_bseg-wrbtr.
***endif.
***if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21.
      wa_out-othdeb = wa_bseg-wrbtr.
***endif.
read table it_out3 with key lifnr = wa_bseg-lifnr binary search.
on change of wa_bseg-lifnr.
*move: wa_lfa1-name1 to wa_out-name1,
    wa_lfa1-lifnr to wa_out-lifnr.
wa_out-opbal = it_out3-wrbtr.
endon.
*if wa_out-opbal is not initial.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
**else.
*wa_out-bal = wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
*endif.
wa_out-bal = wa_out-opbal + wa_out-purch + wa_out-paym + wa_out-grdeb + wa_out-othdeb + wa_out-othcre.
at end of lifnr.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
append wa_out to gt_out.
*collect wa_out into gt_out.
clear wa_out.
clear it_out3.
clear wa_bsegnew1.
endat.
endif.
clear: wa_bseg, wa_bkpf, wa_J_1IMOVEND.
endloop.
loop at gt_out into wa_out.
collect wa_out into gt_out1.
endloop.
endform.                    " sub_process_data
Regards,
Santosh Kumar M.

WCS11G - Start Menu Items for Admin interface?

I'm looking into WCS 11G since I need to migrate a 7.5.5 site.
As it looks now, code or structure won't be modified to better support features such as supporting the contributor interface better so a lot of our users will expect to use the admin interface.
I am however having an issue enabling simple start menu items for content. I.e. a simple Start Menu Item for a Page, simply will not show up. It shows up just fine in the contributor interface however.
I've been going through all the documentation, but I cannot see any references to there being any limits on what kind of assets can be presented in the admin interface.
Is this a bug I'm experiencing? Or simply an approach taken to force users over to the contributor interface?
Thanks
/Lars

By default the Admin UI will not show certain asset types, this is intentional and controlled by the property advancedUI.enableAssetForms in futuretense_xcel.ini. If you set this to true and restart then the Page assets and others will show up. Here's an extract from the Property Files Reference Guide:
advancedUI.enableAssetForms
Used to enable and disable the WebCenter Sites
Admin interface for content contributors. Access
to the following assets is affected:
• All flex assets and their parent assets
• All basic assets
• Engage assets, such as recommendations,
segments and promotions
• Query, Collection, and Page assets
By default, this property is set to false, which
disables the WebCenter Sites Admin interface for
content contributors. The assets listed above
cannot be created, edited, searched for, or deleted,
except from the WebCenter Sites Contributor
interface, where they are supported by default.
Note: In the Contributor interface, asset types and
assets intended for developers are either available
only for inspection or they are inaccessible. They
must be accessed from the WebCenter Sites
Admin interface. For a comparison of features in
the Contributor and Admin interfaces, see the
WebCenter Sites User’s Guide.
Default value: false
Phil

Closing Collections Work Items based on FI-CA Transactions

Hello Colleagues,
We have a requirement to close Collections Work Items when certain transactions are performed, e.g. Creation of Instalment Plan, Write-off, Payments to name just a few.
Because some of these items involve clearings, Dunning will not be triggered for the cleared items. Therefore I assume the Dunning BRF configuration cannot be used to close the Work items.
Is the only way to close work items when these FICA transactions are performed is by coding FICA Event logic that is specific to each of the transactions? (e.g. use a Write-Off Event to close work items when items are written off, an Installment Plan Event when Installment Plan is created, and so on? )
Your insights will be very helpful.
Thanks in advance,
Ivor Martin

Thanks Bill.
I understand and agree with the expectation gap about Instalment Plans.
Some good news on clearing of dunned items:
We did some more testing after un-checking the "Enforcement" Work item in the Work item category configuration.
Now the work item is closed when the document that is in dunning is cleared (i.e. via payments, write-offs, reversals, acct maintence, etc). The Work item Status turns to "G" (closed due to incoming payment).
I have logged an OSS in regards to the Instalment Plan on the request of my client - I would be surprised if they send us a fix to close the work item upon creation of an Instalment Plan. I think we will end up coding our work item closing logic in FI-CA Event 3040 (after the Instalment Plan is created).
Regards,
Ivor

Strange problem with Outlets and Collection View Items

This is a strange issue. I am using XCode 3.2.2 and I am building a Collection View. To do this I have a non-document based application that uses Core Data.
*Collection View Item Class*
I created a new class that inherits NSCollectionViewItem and built it to have an outlet to the Label.
*Collection View Item NIB*
I created a Empty NIB for my Collection View Item. To the NIB I added a Custom View object and set the Class Identity to NSBox. I then added a Label to the new NSBox. I changed the File Owner to the new class and connected the "view" outlet to the new NSBox and the Label to the label outlet.
*Main Menu NIB*
I added a new NSCollectionViewItem object to the Main Menu NIB and set the Class Identity to the new class mentioned above. I then set the NIB Name to the name of the NIB mentioned above. In the window I added a NSCollectionView then set its Item Prototype to the new NSCollectionViewItem object I just configured. This is the typical way to set up a collection view with its item in a different NIB.
*Back to the problem*
Everything seem to work well except that in the setRepresentativeObject in the Collection View Item class when it attempts to set the Label to a value. Nothing happens. When I check closely I find that the Label is coming back nil. It is properly linked. I deleted everything and rebuilt the collection view item and relinked everything without success.
*How I made it work but not happy with it*
I have finally made this work by simply putting the line "[self view];" just before I attempt to run "[label setStringValue:name];". If I remark out the "[self view];" the label returns nil. I have a note near the line to make it easier to spot. It seems that I should not need to access the superclass's "view" accessor just to access one of view's subviews. Is this a bug or have I written this wrong?
The Collection View Item code is below. Any help is appreciated.
Thanks,
Rob
#import <Cocoa/Cocoa.h>
#import "PersonManagedObject.h"
@interface PersonSelectionViewItem : NSCollectionViewItem {
NSTextField *label;
#pragma mark Finalizers
- (void)dealloc;
#pragma mark Outlets
@property (nonatomic, assign) IBOutlet NSTextField *label;
#pragma mark Instance Methods
- (void)configureKeyValueObserving;
- (void)removeKeyValueObserving;
#pragma mark Overrides
- (void)setRepresentedObject:(id)representedObject;
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context;
@end
#import "PersonSelectionViewItem.h"
@implementation PersonSelectionViewItem
#pragma mark Finalizers
- (void)dealloc{
[self removeKeyValueObserving];
[super dealloc];
#pragma mark Outlets
@synthesize name;
#pragma mark Instance Methods
- (void)configureKeyValueObserving{
PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
[person addObserver:self forKeyPath:@"lastNameFirstName" options:0 context:NULL];
- (void)removeKeyValueObserving{
PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
[person removeObserver:self forKeyPath:@"lastNameFirstName"];
#pragma mark Overrides
- (void)setRepresentedObject:(id)representedObject{
[super setRepresentedObject:representedObject];
NSString *personName = (NSString *)[representedObject valueForKey:@"lastNameFirstName"];
[self view]; //<---Without this line the "label" variable 2 lines down will be nil.
if (personName) {
[label setStringValue:personName];
[self configureKeyValueObserving];
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context{
if ([keyPath isEqualToString:@"lastNameFirstName"]) {
[[self label]setStringValue:[object valueForKey:@"lastNameFirstName"]];
} else {
[super observeValueForKeyPath:keyPath ofObject:object change:change context:context];
@end

I think you must be correct. I just ran into the problem again in yet another NIB. It was in the setRepresentedObject method. I simply put in the same line "\[self view\]" just before I needed to set the value of the view component and it worked again. If it is the same in other components I guess I just need to pay attention to it. Thanks for the information.
Message was edited by: Cycles4Fun

Crawl log error in sharepoint 2013 for search services

Dear Support,
please find below mention crawl log error in sharepoint 2013 for search services.
8,597 The server is unavailable and could not be accessed. The server is probably disconnected from the network.
423 This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also
want to crawl this repository during off-peak usage times.
59 Processing this item failed because of a timeout when parsing its contents.
11 The filtering process has been terminated
4 SharePoint returned an empty response.
3 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly.
2 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.
would request your support for resolving this type of issue

1. Are you able to browse the sites on SP server. server is unavailable means that application pool
of that site is down. Check application pool on all server. if you start any application pool. make sure it does not stop few minutes later. you need to update password if it does stop
2. Create a disable loopbackcheck of registry on all servers
http://blogs.technet.com/b/sharepoint_foxhole/archive/2010/06/21/disableloopbackcheck-lets-do-it-the-right-way.aspx
http://support.microsoft.com/kb/926642/en-us
3. Create a new search service application and check if you face same issue.
4. I assume you have change some password or other setting when you started facing this issue. what changes were made in environment
If this helped you resolve your issue, please mark it Answered

FM for Actual cost line items for orders.

HI EXPERTS,
I was working on Actual cost line items for orders / Internal orders of an employee.
standard program RKAEP000 is present through TCODE KOB1.
I want some customization of report, so debugged the program and found that its using a FM 'K_LINE_ITEMS_SELECT_AND_LIST' to calculate internal orders.
But the FM has used REUSE_ALV_* and displaying output itself.
the requirement is to customize the output display .
I searched with K_LINE_* and found some other function modules too.
K_LINE_ITEM_CHECK
K_LINE_ITEM_APC_SIGN_GET
K_LINE_ITEM_GET_CONTEXT_MENU
K_LINE_ITEM_GET_TOOLBAR
K_LINE_ITEM_LOGICAL_KEY_GET
K_LINE_ITEM_TECH_SETTINGS_SET
K_LINE_ITEM_VALUE_TYPES_GET
K_LINE_ITEM_VALUE_TYPES_SET
K_LINE_ITEMS_ACT_GRID
K_LINE_ITEMS_SELECT
K_LINE_ITEMS_SELECT_AND_LIST
K_LINE_ITEM_ACT_CALL_WITH_DATA
K_LINE_ITEM_ACT_DATA_GET
K_LINE_ITEM_CM_CALL_WITH_DATA
K_LINE_ITEM_DEV_CALL_WITH_DATA
K_LINE_ITEM_PLN_CALL_WITH_DATA
K_LINE_ITEM_PROCESS_UCOMM_ACT
K_LINE_ITEM_STEERING_GET
Can anybody tell which FM should i use so that result i will get in an internal table?
or suggest any other methods
Thanks in Advance.
Lucky

I also had the same requirement and used function module K_LINE_ITEM_ACT_DATA_GET
this function is calling K_LINE_ITEMS_SELECT_AND_LIST function with I_NO_DISPLAY parameter
and returning the result.
Already they are in same function group,
I wrote this for future requirements of people after 4 years of this thread

Re:- How to see customer/vendor open items for profit center wise

any one help me regarding : How to see customer/vendor open items for profit center wise. That is possiable or not please suggest to me. I am using 4.6c version .

Run the report from Tcode FBL1N for vendor open item and from FBL5N fron Customer open items.
When you get the report, click on Change Layout icon ( or press Control + F8 from keyboard), search Profit Center fron the Table of Hidden fields on the right hand side. Move that field to the Left hand side table. Click ok, now you should be able to see the Profit Center column in your report.
You can save this layout by clicking on the Save Layout icon ( or press Control + F12 from keyboard)
Next time you can choose the saved layout by clicking on the Select Layout icon ( or press Control + F9 from keyboard)
Regards
Dharmveer

Retrieve list items from the textbox text value and display the dropdownlist item for that particular list item

hi,
I have created a custom list in my sharepoint :
List1 name: employeedepartment -
Title empdepartment
A D1
B D2
C D3
List2 name: employeedetails
emptitle empname empdepartment(lookup) --> from the list "employeedepartment"
x Ram D1
y Robert D2
z Rahim D3
My task is to create a custom webpart that will be for searching this employee details by entering emptitle
For this, i have created a visual webpart using visual studio 2010, my webpart will be like this:
emptitle ---> TextBox1 Button1--> Text property : Search
empname---> TextBox2
empdepartment--> DropDownList1
For this, i wrote the code as follows:
protected void Button1_Click(object sender, EventArgs e)
using (SPSite mysite = new SPSite(SPContext.Current.Site.Url))
using (SPWeb myweb = mysite.OpenWeb())
SPList mylist = myweb.Lists["employeedetails"];
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + TextBox1.Text.ToString() + "</Value></Eq></Where>";
SPListItemCollection myitems = mylist.GetItems(query);
if (myitems.Count > 0)
foreach (SPListItem item in myitems)
string a1 = Convert.ToString(item["empname"]);
string a2 = Convert.ToString(item["empdepartment"]);
TextBox2.Text = a1; // displaying properly
//DropDownList3.SelectedIndex = 1;
It is showing the list item in textbox according to the item entered in the textbox1... But I am stuck to show in the dropdown list.
Suppose, if i enter X in textbox and click on search, then dropdownlist need to show D1,
for Y --> D2 and for Z-> D3... like that.
What code do i need to write in the button_click to show this...
Please don't give any links...i just want code in continuation to my code.

Hi,
Since you have got the data you want with the help of SharePoint Object Model, then you can focus on how to populate values and set an option selected in the Drop Down List.
With the retrieved data, you can populate them into the Drop Down List firstly, then set a specific option selected.
Here is a link will show how to populate DropDownList control:
http://www.dotnetfunda.com/articles/show/30/several-ways-to-populate-dropdownlist-controls
Another link about select an item in DropDownList:
http://techbrij.com/select-item-aspdotnet-dropdownlist-programmatically
Best regards
Patrick Liang
TechNet Community Support

Custom display template for search

HI
I have Created a custom Item Template as shown below.I want to map this with my custom result type but it is not working
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>News Item</title>

</head>
<body>
<div id="StoraEnso_Item_Default">

<div id="_#= $htmlEncode(itemId) =#_" name="SEItem" data-displaytemplate="StoraEnsoDefaultItem" class="ms-srch-item" onmouseover="_#= ctx.currentItem_ShowHoverPanelCallback =#_" onmouseout="_#= ctx.currentItem_HideHoverPanelCallback =#_">
<h2 class="heading"><a href="_#= ctx.CurrentItem.Path =#_">_#= ctx.CurrentItem.Title =#_</a></h2>
<div id="_#= $htmlEncode(hoverId) =#_" class="ms-srch-hover-outerContainer"></div>
<p>_#= Srch.U.processHHXML(ctx.CurrentItem.HitHighlightedSummary) =#_</p>
<div class="footer">
<dl class="desc">
<dt>SiteTitle</dt> _#= ctx.CurrentItem.SEDWMPNewsPublishDate =#_
<dd><a class="status" href="#">_#= ctx.CurrentItem.SiteTitle =#_</a></dd>
<dt>Author</dt>
<dd><a class="status" href="#">_#= ctx.CurrentItem.DisplayAuthor =#_</a></dd>
</dl>
</div>
</div>

</div>
</body>
</html>
If you see in "managedPropertyMapping" I have added a new property "SEDWMPNewsPublishDate" and when I use in my html I am not getting the value.
I checked with fiddler and I found that This property is not getting mapped. Json object does return this property.However this property has value. I have tested with content search webpart nad my code also.it returns value.
Can anyone let me know is there any issue in the above rendering template code
On update to this, I was using resultscript webpart on the page to display data and I have created custom result type to modify the display.What I found that when I add the custom properties which I need, on result script webpart using as
follows
scriptWebPart.SelectedPropertiesJson = "[\"SEDWMPNewsPublishDate\",\"SEDWMPIntroduction\"]"
and save the changes then I start getting the value of my custom properties.
I don't know how the result type works in accordance with display templates and when does it gets applied on the search data.If anyone is aware please let me know.
If I can't use the display templates with custom properties then what is the use of ManagedPropertyMapping on display templates.Can anyone please make me understand?

You need to update the js file also.You can upload the js file also.In js file you have a column "ManagedPropertyMapping" this denotes which managed property should come for item in search.
For uploading the js file you can use as follows under module
<File Path="ModSearchDisplayTemplates\x.js" Url="x.js" Type="GhostableInLibrary">
<Property Name="Title" Value="xjs" />
<Property Name="MasterPageDescription" Value="$Resources:Microsoft.Office.Server.Search,DisplayTemplateDescription_SearchDefaultItem" />
<Property Name="ContentType" Value="$Resources:TemplateContentType_Code_Name" />
<Property Name="DisplayTemplateLevel" Value="Item" />
<Property Name="TemplateHidden" Value="0" />
<Property Name="TargetControlType" Value=";#SearchResults;#" />
<Property Name="HtmlDesignLockedFile" Value="TRUE" />
<Property Name="ManagedPropertyMapping" Value="'Title':'Title','Path':'Path','Description':'Description','EditorOWSUSER':'EditorOWSUSER','LastModifiedTime':'LastModifiedTime','CollapsingStatus':'CollapsingStatus','DocId':'DocId','FileExtension':'FileExtension','ParentLink':'ParentLink','FileType':'FileType','IsContainer':'IsContainer','SEDWMPNewsPublishDate00':'SEDWMPNewsPublishDate00','SEDWMPIntroduction':'SEDWMPIntroduction','SEDWMPNewsIsSticky':'SEDWMPNewsIsSticky','SEDWMPNewsPostThreadId':'SEDWMPNewsPostThreadId'"/>
</File>

Can i assign a collective srch help for select option in list display

can i assign a collective srch help for select option in list display

Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva.

Field values are repeating for search help.

Hello Friends.
I have a problem. When I create a search help for a field the identical field values are repeating. What should I do to trigger only the first time.
for example:
<u>Field-name</u>-                        <u>field-value</u>
Supplier Nr ---                                 Commodity
5001 -
                                           casting
5002 -
                                           casting
5003 -
                                           casting
So when I create the search help for commodity it is showing 'casting' 3 times in a pop-up window. It should not repeat. Can you please give me the solution what should I do?

Hi
Search helps
Standard search help
Types of search helps
Concept of search help
Search Help Interface
Dialog behavior of search helps
Selection method for search helps
Performance of search helps
Attaching search helps
Hierarchy of search helps
Standard Search Help
The input help (F4 help) is a standard function of the R/3 System. It permits the user to display a list of possible values for a screen field. A value can be directly copied to an input field by list selection.
The fields having an input help are shown in the R/3 System by the input help key to the right of the field. This key appears as soon as the cursor is positioned on the corresponding screen field. The help can be started either by clicking on this screen element or with function key F4.
If the number of possible entries for a field is very large, you can limit the set of displayed values by entering further restrictions.
Further meaningful information about the displayed values is included in the display of possible entries, especially if the field requires that a formal key be entered.
TYPES OF SEARCH HELPS
Elementary search helps
Describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
Collective search help
Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
Search Help Interface
Search help interface determines how the exchange of values between the screen template and the selection method is implemented.
The search help interface defines the context data that can be used in the input help and the data that can be returned to the input mask. Analogously to the interface of a function module, the search help interface comprises interface parameters.
When you define an interface parameter of a search help, you must also define whether it should be used to copy data to the input help (IMPORT parameter) or whether it should be used to return data from the input help (EXPORT parameter). A parameter of a search help can also have both attributes at the same time.
The location from which the IMPORT parameters of a search help get their values and the screen fields in which the contents of the EXPORT parameters of the search help are returned are defined in the search help attachment. The search help itself should always be attached to an EXPORT parameter of the search help. If this parameter is also the IMPORT parameter, its contents are only used in the input help if it is a search string (that is, if it contains a ´*´ or a ´+´).
You must define the parameter types of a search help. You can do this by assigning them data elements.
Value Transport for Input Helps
NOTE:In the above example, screen fields A, B and C are linked with parameters of the search help. As a result, values can only be transported between the screen and the search help for these three fields. Existing contents of screen fields A and B can be used for selecting the hit list since they are linked with an import parameter of the search help. The values of parameters A and C can be returned to the screen from the hit list since these parameters are declared as export parameters of the search help.
Description of dialog behavior
A hit list might contain plentiful number of entries. A
dialog provides the user with an option to restrict the
entries displayed on the hit list.
In an input help process, the set of possible entries is presented in the dialog box as a list for displaying the hit list. The user selects the required value from this list by double clicking. Since the possible entries are often formal keys, you must be able to display further explanatory information about the possible entries in the list.
If the set of possible entries is very large, the user should be able to define additional conditions for the attributes of the selected entry. Restricting the set of data in this way both increases the clarity of the list and reduces the system load. Additional conditions can be entered in a further dialog window, the dialog box for restricting values.
Specifying the dialog type of a search help defines whether the dialog box for restricting values should be offered and if so under what conditions.
The attributes in the dialog box for displaying the hit list or in the dialog box for restricting values must be defined as internal parameters of the search help. An internal parameter can also be used in only one of the two dialog boxes. It can also belong to the search help interface.
The internal parameter types are also defined with data elements. These data elements define how the parameters are displayed in the two dialog boxes.
Reward if usefull

Times ten to improve performance for search results in Oracle eBS

Hi ,
We have various search scenarios in our ERP implementaion using Oracle Apps eBS, for example searching for an item . Oracle apps does provide item search but performance is not great. We have about 30 million items and hence to improve the performance of the search thought Times ten may help.
Can anyone please clarify if Times ten can be used to improve performance on the eBS database , if yes how.

Vikash,
We were thinking along the same lines (using TimesTen for massive item search in e-Business Suite). In our case massive Item / parametric search leveraging the Product Information Management application. We were thinking about setting up a POC on a Linux Server with a Vision Instance. We should compare notes?
SParker

Service Items for Line Type as Service

I have created a new line type in purchasing as 'Service'. The Value Basis is 'Amount' and Purchasing Basis is 'Services'. Now when I am trying to create a PO for this line type, the Item field is non updateable. I cannot search for any items.
Can I not create and select items for this line type?

Hi,
This seems to be the current functionality. Instead of choosing the item, you can fill the category and description.
If you are trying to treat your purchasable services as item, than try using line type with similar setting as Goods
Thanks

Collection of items for searching

Similar Messages

Maybe you are looking for