Colored circles appearing into view using an expression instead of keyframes?
Hello and thank you for your time,
I'll explain this as simply as I can,
I have a comp where a satelite is orbiting the Earth (the Earth is my comp space). The Earth is also in rotating but much slower. The satelite is one comp, and the Earth rotating is another comp. The orbiting satelite is looped, the Earth comp is rotating is looped - all is good there.
Everytime the satelite makes a complete orbit around the Earth, at a specfic point on the comp space of my choosing, I would like to add a colored circle. So it would look like that circle appears into view.
So the colored cirlce would appear into view, onto the comp (Earth) and follow the slow and gradual rotation of the Earth as it moves from left to right. The satelite would continue to orbit fast.
However I would like to perform this action of "add coloured circle onto Earth" perhaps 100's of times and at specific points.
The most important challenge here is : how can I perform this action using expressions so that I do not have to keyframe hundreds of colored circles appearing into view one at a time?
The second important thing is : how can I position these colored circles in a specfic pattern laid out over the Earth and not in a random fashion?
Thanks again!
D
Simply add the circles in the 2D texture or a separate comp synced to your Earth and make it a spehjre by using yet one more instance of CC Sphere. The timing could certainly be worked out using expressions based on the longitude/ latitude coordinates vs. angle, but that's gonna be more than copy&pasting 3 lines of code on a forum. If you can#t do it, hire someone or simply bite the bullet and hand-animate.
Mylenium
Similar Messages
-
safari won't load web page or freezes
Hope info from this article is helpful.
http://support.apple.com/kb/TS1473 -
Pipe delimiter string into rows using regular expression
hi Can anyone please help writing pipe' l 'delimiter values to rows
sample data 'something1|something2|something3'
i tried with below query
SELECT LEVEL,
TRIM ('"' FROM RTRIM (REGEXP_SUBSTR ('something1|something2|something3' || '|',
'".*?"||[^|]*|',
1,
LEVEL
'|'
) sub_str
FROM dual
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE ('something1|something2|something3' , '".*?"|[^|]*')) + 1SQL> ed
Wrote file afiedt.buf
1 with t as (select 'something1|something2|something3' as txt from dual)
2 -- end of sample data
3 select REGEXP_SUBSTR (txt, '[^|]+', 1, level)
4 from t
5* connect by level <= length(regexp_replace(txt,'[^|]*'))+1
SQL> /
REGEXP_SUBSTR(TXT,'[^|]+',1,LEVE
something1
something2
something3
SQL> -
working on powerpoint presentation and all the sudden a round multi-color circle appears, and I can't exit out or continue with my project. help please???
the spinning round circle is apple's way of showing that the computer is thinking... when it happens to me it often means the computer is frozen and if this is a repeating problem then it most likely means that the problem lies with the software that you are using. Try uninstalling and reinstalling the PowerPoint software, or maybe you can see if there is an update available to the software that fixes the problem. Good Luck! - Mark
-
How to maintain Ztable using function module instead of SM30
Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'S'
VIEW_NAME = 'Table Name'
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
OTHERS = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed -
Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?
Here's what I've found on the issue:
Pantone color definitions have changed (coinciding with CS6) — they are now "Pantone+" (I think that's what they're called). The "+" apparently means they're now LAB colors. Lab colors are not properly displayed in Preview (or in Finder previews) — they display as black (as far as I can tell, in all circumstances). I'm sure it's a tad more complicated than that, but that's the gist.
Now the bad news — nobody seems to know anything about a fix or workaround (unless you convert your PDFs to process — this might be a fix for sending to clients). It causes issues for me in AI files — being able to view them in the finder (with previews) is a HUGE time saver for my workflow... when they're all black, not so much.
In my chat with a director of product dev at Adobe, they placed the responsibility to fix on Apple (assuming Apple wants to support Pantone color definitions in their OS). -
I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
Create a view using common table expressions
I'm having trouble finding out if this is even possible in Oracle.
Here is what I'm trying to accomplish with my view. A subject takes a survey numerous times across numerous dates. Depending on the responses to different questions, that subject is marked as having a set disease or affliction. The view that I'm building collects the necessary answers for each survey into one place (the first common table expression), then in subsequent CTEs, I'm adding the disease classification when the responses to the needed questions match. Sometimes the requirements state that the survey can't already be positive for other diseases, meaning that I need to ultimately discount them when checking subsequent diseases (each disease is built using it's own CTE of which there are 13). I built the query which performs these tasks with no problems. It runs and gives the responses that I'm looking for.
The problem comes into play when I attempt to wrap the existing working query into a create view process. When I add CREATE OR REPLACE VIEW TESTENV.TESTVIEW AS ( and the ending ); after the query, it is giving me the error: ORA-32034: unsupported use of WITH clause.
Am I getting the error simply because I can't put CTE's into views, or is it because the syntax for putting CTEs into Views is different than a normal view build process? Also, in case it makes a difference, the version of Oracle I'm using is: Oracle 10g.
Thank you.Here is the view that I'm trying to build:
<pre class="jive-pre">
CREATE OR REPLACE VIEW GI_DEV.PAIN_COMP AS (
WITH gatheredQuestions AS (
SELECT
s.date_of_survey_id,
a.question_1 as A_1,
a.question_5 as A_5,
a.question_6 as A_6,
a.question_7 as A_7,
a.question_8 as A_8,
a.question_9 as A_9,
a.question_10 as A_10,
a.question_12 as A_12,
a.question_13 as A_13,
a.question_14 as A_14,
a.question_15 as A_15,
a.question_16 as A_16,
b.question_1 as B_1,
b.question_4 as B_4,
b.question_5 as B_5,
b.question_6 as B_6,
b.question_7 as B_7,
b.question_8 as B_8,
b.question_9 as B_9,
b.question_11 as B_11,
b.question_12 as B_12,
b.question_13 as B_13,
b.question_14 as B_14,
b.question_15 as B_15,
b.question_16 as B_16,
b.question_16a_a as B_16a_a,
b.question_16a_b as B_16a_b,
b.question_16a_c as B_16a_c,
b.question_16a_d as B_16a_d,
b.question_16a_e as B_16a_e,
b.question_16a_f as B_16a_f,
b.question_16b as B_16b,
c.question_1 as C_1,
c.question_2 as C_2,
c.question_3 as C_3,
c.question_8 as C_8,
c.question_9 as C_9,
c.question_10 as C_10,
c.question_11 as C_11,
c.question_11a as C_11a,
c.question_11b as C_11b,
d.question_1 as D_1,
d.question_2 as D_2,
d.question_3 as D_3,
d.question_4 as D_4,
d.question_5 as D_5,
d.question_5a as D_5a,
d.question_5b as D_5b,
d.question_5c as D_5c,
d.question_6 as D_6,
d.question_6a as D_6a,
d.question_6b as D_6b,
d.question_6c as D_6c,
d.question_6d as D_6d
FROM
new_date_of_survey s
LEFT OUTER JOIN new_section_a a on a.solid_visit_a_id = s.date_of_survey_id
LEFT OUTER JOIN new_section_b b on b.solid_visit_b_id = s.date_of_survey_id
LEFT OUTER JOIN new_section_c c on c.solid_visit_c_id = s.date_of_survey_id
LEFT OUTER JOIN new_section_d d on d.solid_visit_d_id = s.date_of_survey_id
), functDyspepsia as (
SELECT
date_of_survey_id,
'Functional Dyspepsia' as pain_type
FROM gatheredQuestions g
WHERE
g.A_1 in (4, 5)
and g.A_5 in (3, 4, 5, 6)
and g.A_6 in (0, 2, 3)
and (g.A_7 in (0, 2) and g.A_8 in (0,2))
and (g.A_9 in (0, 2) and g.A_10 in (0, 2))
), IBSLower as (
SELECT
date_of_survey_id,
'IBS Lower' as pain_type
FROM gatheredQuestions g
WHERE
g.B_1 in (3, 4, 5)
and g.B_4 in (2, 3, 4, 5, 6)
and 2 <= (CASE WHEN g.B_5 in (3, 4, 5) THEN 1 ELSE 0 END) + (CASE WHEN (g.B_6 in (3, 4, 5) and g.B_7 not in (3, 4, 5)) or (g.B_6 not in (3, 4, 5) and g.B_7 in (3, 4, 5)) THEN 1 ELSE 0 END) + (CASE WHEN (g.B_8 in (3, 4, 5) and g.B_9 not in (3, 4, 5)) or (g.B_8 not in (3, 4, 5) and g.B_9 in (3, 4, 5)) THEN 1 ELSE 0 END)
), IBSUpper as (
SELECT
date_of_survey_id,
'IBS Upper' as pain_type
FROM gatheredQuestions g
WHERE
g.A_1 in (3, 4, 5)
and g.A_5 in (3, 4, 5, 6)
and 2 <= (CASE WHEN g.A_6 in (3, 4, 5) THEN 1 ELSE 0 END) + (CASE WHEN (g.A_7 in (3, 4, 5) and g.A_8 not in (3, 4, 5)) or (g.A_7 not in (3, 4, 5) and g.A_8 in (3, 4, 5)) THEN 1 ELSE 0 END) + (CASE WHEN (g.A_9 in (3, 4, 5) and g.A_10 not in (3, 4, 5)) or (g.A_9 not in (3, 4, 5) and g.A_10 in (3, 4, 5)) THEN 1 ELSE 0 END)
), abMigraine as (
SELECT
date_of_survey_id,
'Abdominal Migraine' as pain_type
FROM gatheredQuestions g
WHERE
g.B_16 in (3, 4, 5)
and 2 <= ((CASE WHEN g.B_16a_a = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.B_16a_b = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.B_16a_c = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.B_16a_d = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.B_16a_e = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.B_16a_f = 2 THEN 1 ELSE 0 END))
and g.B_16b = 2
), lowerFunctAbPainSyndrome as (
SELECT
date_of_survey_id,
'Functional Abdominal Pain Syndrome - Lower' as pain_type
FROM gatheredQuestions g
WHERE
g.B_1 in (4, 5)
and g.B_4 in (3, 4, 5, 6)
and date_of_survey_id not in (select date_of_survey_id from functDyspepsia union select date_of_survey_id from abMigraine union select date_of_survey_id from IBSLower union select date_of_survey_id from IBSUpper)
and
((g.B_15 in (2,3,4,5) and 2 > ((CASE WHEN g.B_11 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.B_12 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.B_13 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.B_14 in (2,3,4,5) THEN 1 ELSE 0 END)))
or (g.B_15 not in (2,3,4,5) and 2 <= ((CASE WHEN g.B_11 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.B_12 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.B_13 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.B_14 in (2,3,4,5) THEN 1 ELSE 0 END))))
), upperFunctAbPainSyndrome as (
SELECT
date_of_survey_id,
'Functional Abdominal Pain Syndrome - Upper' as pain_type
FROM gatheredQuestions g
WHERE
g.A_1 in (4, 5)
and g.A_5 in (3, 4, 5, 6)
and date_of_survey_id not in (select date_of_survey_id from functDyspepsia union select date_of_survey_id from abMigraine union select date_of_survey_id from IBSLower union select date_of_survey_id from IBSUpper)
and
((g.A_16 in (2,3,4,5) and 2 > ((CASE WHEN g.A_12 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.A_13 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.A_14 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.A_15 in (2,3,4,5) THEN 1 ELSE 0 END)))
or (g.A_16 not in (2,3,4,5) and 2 <= ((CASE WHEN g.A_12 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.A_13 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.A_14 in (2,3,4,5) THEN 1 ELSE 0 END) + (CASE WHEN g.A_15 in (2,3,4,5) THEN 1 ELSE 0 END))))
), lowerFunctAbPain as (
SELECT
date_of_survey_id,
'Functional Abdominal Pain - Lower' as pain_type
FROM gatheredQuestions g
WHERE
g.B_1 in (3, 4, 5)
and g.B_4 in (3, 4, 5, 6)
and date_of_survey_id not in (select date_of_survey_id from functDyspepsia union select date_of_survey_id from abMigraine union select date_of_survey_id from IBSLower union select date_of_survey_id from IBSUpper union select date_of_survey_id from upperFunctAbPainSyndrome union select date_of_survey_id from lowerFunctAbPainSyndrome)
), upperFunctAbPain as (
SELECT
date_of_survey_id,
'Functional Abdominal Pain - Upper' as pain_type
FROM gatheredQuestions g
WHERE
g.A_1 in (3, 4, 5)
and g.A_5 in (3, 4, 5, 6)
and date_of_survey_id not in (select date_of_survey_id from functDyspepsia union select date_of_survey_id from abMigraine union select date_of_survey_id from IBSLower union select date_of_survey_id from IBSUpper union select date_of_survey_id from upperFunctAbPainSyndrome union select date_of_survey_id from lowerFunctAbPainSyndrome)
), functConstipation as (
SELECT
date_of_survey_id,
'Functional Constipation' as pain_type
FROM gatheredQuestions g
WHERE
2 <= ((CASE WHEN g.C_1 in (0, 2) THEN 1 ELSE 0 END) + (CASE WHEN (g.C_2 in (2,3) and g.C_3 <> 2) or (g.C_2 not in (2, 3) and g.C_3 = 2) THEN 1 ELSE 0 END) + (CASE WHEN g.C_8 = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.C_9 in (3, 4, 5) THEN 1 ELSE 0 END) + (CASE WHEN g.C_10 = 2 THEN 1 ELSE 0 END) + (CASE WHEN g.C_11 in (4, 5, 6) THEN 1 ELSE 0 END))
and date_of_survey_id not in (select date_of_survey_id from IBSLower union select date_of_survey_id from IBSUpper)
), fecalIncontinence as (
SELECT
g.date_of_survey_id,
'Nonretentive Fecal Incontinence' as pain_type
FROM
gatheredQuestions g
left outer join new_date_of_survey s on s.date_of_survey_id = g.date_of_survey_id
left outer join new_demographics d on d.solid_demographics_id = s.demo_id
WHERE
4 <= trunc((months_between(s.survey_date, d.date_of_birth))/12)
and g.C_11 in (4, 5, 6)
and g.C_11a in (2, 3)
and g.C_11b in (3, 4, 5, 6)
and g.date_of_survey_id not in (select date_of_survey_id from functConstipation)
), aerophagia as (
SELECT
date_of_survey_id,
'Aerophagia' as pain_type
FROM gatheredQuestions g
WHERE
2 <= ((CASE WHEN (g.D_1 in (3, 4, 5) and g.D_2 not in (3, 4, 5)) or (g.D_1 not in (3, 4, 5) and g.D_2 in (3, 4, 5)) THEN 1 ELSE 0 END) + (CASE WHEN g.D_3 in (3, 4, 5) THEN 1 ELSE 0 END) + (CASE WHEN g.D_4 in (3, 4, 5) THEN 1 ELSE 0 END))
), cycVomitSyndrome as (
SELECT
date_of_survey_id,
'Cycllic Vomiting Syndrome' as pain_type
FROM gatheredQuestions g
WHERE
g.D_5 in (4, 5)
and g.D_5a in (3, 4, 5, 6)
and g.D_5b = 2
and g.D_5c = 2
), adolRumSyndrome as (
SELECT
date_of_survey_id,
'Adolescent Rumination Syndrome' as pain_type
FROM gatheredQuestions g
WHERE
g.D_6 in (4, 5)
and g.D_6a = 2
and g.D_6b = 0
and g.D_6c = 0
and g.D_6d = 0
), gatheredPains as (
+
select * from functDyspepsia
union
select * from IBSLower
union
select * from IBSUpper
union
select * from abMigraine
union
select * from lowerFunctAbPainSyndrome
union
select * from upperFunctAbPainSyndrome
union
select * from lowerFunctAbPain
union
select * from upperFunctAbPain
union
select * from functConstipation
union
select * from fecalIncontinence
union
select * from aerophagia
union
select * from cycVomitSyndrome
union
select * from adolRumSyndrome
SELECT
date_of_survey_id,
string_agg(pain_type) as PainType
FROM gatheredPains
GROUP BY date_of_survey_id
</pre>
I tried remove the leading and ending parenthesis, and ended up getting the error that it is missing the select keyword. When I take the create view step out of this, the query builds with no problem, so I know that it's not missing a select or that it isn't in the correct place.
Thank you for all your help so far. -
How do i stop the rainbow coloured circle from appearing especially when using IPhoto?
how do i stop the rainbow coloured circle from appearing especially when using IPhoto?
Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
Why won't some of my songs, that used to sync, sync to my iPhone5 now? There is an empty circle appearing to the left of the check mark in iTunes for the songs that are not properly syncing.
I've continued tests on different films, and tried my entire collection. I've found about two dozen that will play fine on the PC, but will not cooperate when streamed to either Apple TV or my iPad. I tried several more tests with the audio, and that turned out not to be a factor -- I could not replicate that on another test.
I wonder if something in the header of these files is corrupted or a flag is set incorrectly or something along those lines, as the data appears to be fine -- it's just not "handshaking" with my streaming hardware and/or the Apple Home Sharing code that powers it.
Is there any way for me to "scrub" these files and amend their headers, or get into the file and tinker with that info by hand? -
Problem using views containing xpath expressions with Oracle Forms
Mark,
Nice to see you back on the forum answering questions.
This example is based on the standard purchaseorder schema.
i registered the schema, created a relational table and then created
a view using xpath.everything works well and i am able to select the data
using sql*plus. Now this views is like any other view, when i describe the
view, i can see the all the data types are valid for the columns and also the lengths.
Now when i try to base a data block in oracle forms using this view, i get error
"ORA-24324 - service handle not initialized."
Whereas if i create another view on top of the first view and then base the data block on this view, it works for me. i described the second view from sql*plus and everything seems to be same for me.
this is the same behaviour from database 9i r2 and it exists in 10g r1 also.
Any hints as what might be the problem or you would like me to file a tar for this.
create or replace view purchaseorder_header_xml
as
select id
,extractvalue(xml_data, '/PurchaseOrder/Reference') reference
,extractvalue(xml_data, '/PurchaseOrder/Requestor') requestor
,extractvalue(xml_data, '/PurchaseOrder/User') po_user
,extractvalue(xml_data, '/PurchaseOrder/CostCenter') costcenter
,extractvalue(xml_data, '/PurchaseOrder/SpecialInstructions') spl_instructions
from tab_xmldata
create or replace view purchaseorder_header
as select * from purchaseorder_header_xml
/RaghuNot used Forms for years. However I suspect that Forms is trying to poke around behind the view and not understanding what it sees. I expect you'll need to open a Forms Tar to get to the bottom of this. It also appears that you a workaround which is to create a view on the view by the sound of it..
-
Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.comSorry if I failed to mention, I have done this as well.
-
Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.
You will need to find a forum for MS Word since that is the software that you are trying to manipulate in this. If you think the processing/creation of the PDF plays a role then you should ask in the forum for the software that you are using to create the PDF.
This forum is for issue regarding downloading and installing Adobe trial products, so in any circumstance, your issue does not fit in this forum. -
Unable to apply color formatting to document library custom view using javascript
Hello,
I have applied color formatting to some values in Document library at "Allitems.aspx" page.
Created one view where record of library displaying as per sort rule and trying to apply the color formatting on that view, but its not getting apply.
also tried to insert that list as web part in one page with the same view(created by me) and tried applying color..but not working.
I used below script for color formatting, included in script editor web part:
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.10.0/jquery.min.js"></script>
<script type="text/javascript">
$(document).ready(function()
$Text = $("td.ms-cellstyle.ms-vb2:contains('Very limited risk - acceptable A')");
$Text.css("background-color", "#7FFF00");
$Text = $("td.ms-cellstyle.ms-vb2:contains('Measures Required (in 6 months) - M')");
$Text.css("background-color", "#D2691E");
$Text = $("td.ms-cellstyle.ms-vb2:contains('Immediate measures required - I')");
$Text.css("background-color", "#6495ED");
$Text = $("td.ms-cellstyle.ms-vb2:contains(Stop work until measures are taken - S)");
$Text.css("background-color", "#DC143C");
</script>
Could please suggest a way out.
Thanking you in advance.
Regards,
JayashriHi Jayashri,
Follow the steps to debug your JS code, preferable in IE browser
Press F12 to open your developer tool
Select Script tab
Search for your code, set debugger point by clicking on the left extreme position on line numbers
Click on Start debugging at top, if its not there in your browser just refresh the page, it will hit the debug point.
Hope it will help you in debugging your code, if you need any further details about debugging this, mail me @
[email protected]
Thanks
Shakir -
Scrolling component into view programmatically without using javascript
Hi,
Is it possible to scroll an adf component into view programmatically without using javascript?
I know of <af:scrollComponentIntoViewBehaviour> that can be added to a command component , but is there a way to do that programmatically in a bean?
Problem with using javascript is its not guaranteed to work in different browsers.
Regards,
Rakesh.Hi John,
Thanks for the reply.
If i use the af:scrollComponentIntoViewBehavior, then i wont be able to achieve my desired functionality.
In my use case, i want the id, of the component that needs to be scrolled into view, to be determined in the server listener of the button which is not happening.
Code snippet in jspx page is as follows:
<af:commandButton id="cb1" immediate="true">
<af:clientListener method="clickButton" type="click"/>
<af:serverListener type="customEvent"
method="#{pageFlowScope.bean.doScroll }"/>
<af:scrollComponentIntoViewBehavior id="#{pageFlowScope.bean.compId}/>
</af:commandButton>
And the java code for method doScroll is something like :
public void doScroll (ClientEvent clientEvent)
//logic to determine compId goes here
compId = "id";
So, the problem here is "compId" is set to some value when bean is loaded and the id in the af:scrollComponentIntoViewBehavior will be set to that value forever.
I cant find any way of telling it to re-read the "compId" value, say after clicking the button. I can refresh the button in the server listener to update the compId .
But the updated compId will come into picture from *next click*. This is because, after the button is clicked, "scroll" action happens first and then serverListener executes.
Is there a way to change order of this execution like "execute server listener first and then do the scrolling thing" ?
Regards,
Rakesh.
Edited by: 927925 on Jul 27, 2012 2:02 AM
Maybe you are looking for
-
Hi, can anyone help please. This is the first time I have used this forum. I use Premier Elements 12, a PC, 64 Bit, Windows 7, high powered computer. Just started trimming AVCHD in this software. I would like to know if it is possible to export trim
-
I have the newest Flashplayer, newly installed, AND the latest Internet Explorer. (operating system: Windows Vista). When I open a Flash site I ALWAYS have to load twice (load, then refresh) to see the content. No error message, site seems to load--b
-
my iphone 4 performance has degraded after i did ios 5.0.1 update.. there is a visible delay in all the actions.
-
i just made a project and my text that i made in live type isn't the best looking quality. it's kind of pixelated and fuzzy. it especially shows up when i have it finished and on my dvd i made. what settings to i need to change in order to make the t
-
Macbook slow since Yosemite...EtreCheck included
My MacBook Air (bought this year) was fine until Yosemite. Now it is slow as the old microsoft OS I got rid of! Can anyone take a look at the EtreCheck copied below and tell me what I should do to fix this? By the way, this is my first Mac and I am N