Colors of the Icons in the Print Document Content Window

When you right click a single source layout and click properties and then click next it takes you to the Print Document Content Window, where you can take topics and by clicking the arrow that points to the right hand frame, move the topics into your print document.
I have seen posts on this forum where people talk about the colors of the icons on this screen. I have seen these icons colored blue, white and grey, but nowhere in the documentation or on these forums are the colors specifically documented, telling you what they really mean.
I have a situation where for one of my single source layouts, the colors of the topics on the left pane are blue and the colors on the right pane are white. Meanwhile, in another one of my single source layouts the colors on the left are blue, but the colors on the right are grey and that single source layout doesn't generate the topics that I want.
Can anyone explain to me what these colors mean, and if as I am thinking, grey means not there, why are they there in one single source layoput and not in the other?
Below are some screen shots that illustrate my issue.
This is the bad screen.
and this is the good one.

Hi there
The gray icons signify that the topics have been excluded by virtue of using a Conditional Build Expression.
The blue icons signify that the topics are included in the Printed Output.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Similar Messages

Just updated to new Firefox - now when clicking on a website to visit the color of the print no longer changes to indicate that I have visited that site already. How can I get that feature again?

Since updating to new firefox I have lost a very helpful tool. Before, when I clicked on a website to visit, the color of the print would change from blue to purple to indicate that I had visited that site. Now it does not do that so it is difficult to keep track of what sites I have visited and what sites I haven't when looking down the list of possible sites to visit.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
Make sure that the History is enabled:
* Tools > Options > Privacy > Firefox will: "Use custom settings for history" > Remember my browsing history
See also http://blog.mozilla.com/security/2010/03/31/plugging-the-css-history-leak/

Books are not shown in the TOC of the printed document

Hello,
I am using Robohelp 10. I have a project with several books and topics. When I generate a web help, everything is fine. But now, I have to generate a printed version of it. My problem is that on the table of contents of the generated document, the books are now shown. I need those books to be shown. Please advise.
I can not post the project I am using so I just used a very simple project which I created.
This is the original TOC.
and this is the resulting TOC in the printed document.
The books should still be part of the contents same with the original TOC.
I do not know what is wring with my set-up since I only used the default one. It will be great if you can reply to me ASAP since we need to publish our help document. Thanks a lot!

OK, the samples are a known quantity and normally generate correctly. Thus we know it is something about your environment, assuming you used the supplied style mapping template?
In the last page of the print dialog, are you using the supplied Rh Style Mapping template?
After generating with whatever you are using, have you tried right-clicking alongside the TOC and choosing Update Field. That might correct the TOC.
What version of Word are you using?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can I make the printed document writable?

Hi everyone,
Is there a place in RH9 where I can set an option so that I can save the Word file using its original file name? I want to preview the printed document (Word) and make minor adjustments before I make a PDF.
I have gone through the folders and set them all to be writable--although that doesn't seem to matter; they go right back to being read-only!
Thanks in advance,
Mary

To be honest it is always best to generate the Word file separately first anyway, make any edits and then save it as a PDF.
@robocolumn
The RoboColum(n)
Colum McAndrew

When printing, my preview is correct, but the printed document shows only the center of the printed document

When printing from my MacBook Air, Pages shows the correct preview, but the printed document is only a column taken out of the center of the printed page. What's going on?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

My Mac won't share the printer to my windows 7 computer

My Mac won't share the printer to my windows 7 computer. Worked fine with Snow Leopard but with Lion it won't print from my computer. It also won't connect with file sharing anymore. Any solution that may help please? Thank You

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

Using the PDF Icon in a print document

I would like to use the PDF icon in a printed piece to describe a PDF file that is available. We have a PDF form that we distribute to users. There is also an online version of this form, with a little more functionality. Users can choose between using the PDF form or going online. In a small brochure we outline the purpose of the form and then give the user the option to request the PDF form or go to the online form. I would like to put the PDF icon in the printed brochure so the users can easily identify that it is actually a PDF. Does anyone know where I can get the art for the PDF icon that will be of a high enough resolution to go into a printed brochure? Thanks!

Hi,
The workaround is install Foxit PDF reader - available free.
In DC30 for PDF files mention PC-3-%AUTO%
In MS Explorer change the settings to open PDF files with Foxit.
In CV02N as you select print for PDF files it will directly print the file without opening it thru standard network printer.
Anirudh,
Bill - Please award if useful.

Why do colours change in the printed document

When I add a logo to my artwork in illustrator, import the illustrator file to a word template and print, it changes the printed colours dramatically..(black to blue, green to black and yellow to pink). Do I need to change a setting for that imported logo to make it compatible to print? Without that particular logo, the document prints fine.

open the file in illustrator--set color space to RGB--save--re add to word doc--try again--by default 'Word' uses an RGB color space-and-most printers convert that, on the fly, to CMYK--however a CMYK file that is converted to CMYK on the fly will usually appear colored as you decsribed

Unnecessary black lines being printed in the printed document

I have an year old HP M1136 Laser jet printer ( Serial No. - CND8B9QJ65 ) and use orignal HP cartridges.
And I use Windows 7 ultimate (32-bit) as my operating system.
I guess, The problem isn't regarding the software. It might have something to do with hardware.
The issue is whenever I give the print command to printer, it prints the document as it is but also adds a bunch of blurred black lines on the left side of the printed A4 sheet. This thing ruins the whole look of the document.
Nothing like this happens when Scan command is given. Its only when the printer receives a Print or Photocopy command.
This problem started appearing in the month of February. At the start I adjusted but now the problem has got bigger. Please help.
An earliest response in this reagrd would be highly grateful.

Hello Shubham22,
First, let me welcome you to the HP Consumer Printer Forums.
I am not sure what would cause the issue you are experiencing. Check out the following link for possible troubleshooting you can try:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02003606&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How do I replace font colors across the whole document?

So I know how to change a certain font across the whole document.
I can replace let's say, Times New Roman with Arial throughout the whole document.
However, what if I want to replace a font color?
For example, I want to change the black 0,0,0,0 with black 40,30,30,100 across the whole document, instead of searching one by one and replacing the existing color.
I'm using CS5 on PC

As Peter says, it is better to do with paragraph styles. The above shows where.
In general, you should be using p. styles with little or not local formatting (depends on use). And for local formatting that is repetitive, character styles should be used.
Take care, Mike

When I want to print a document on the internet or web-site, I get the save as menue instead of the printed document.

No more detail available except my other servers work.

Is your printer selected in the Printer - Name box? Is Print to File selected?
http://kb.mozillazine.org/Problems_printing_web_pages

My reader xi opens the wrong document.(windows 7 home premium)

When I click on one pdf, a different one is opened. If I drag the correct document icon to the desktop from the list of pdfs that appears by clicking on the adobe application button at the bottom of the screen (taskbar?), what appears on the desk top is a document of another name . Btw, my Windows 7 home premium finder cannot find the correct document at all. Yet Adobe reader xi knew has it listed. help!

Hard to say. Please let us know exactly the problem, including messages in full.

CS2/CS3/CS4: Cannot get file path in Unicode of the current document on Windows

Hi All,
In my automation plugin I need to have full absolute path of the opened document with any possible non-English letters. Using SDK examples Listener and Getter that come with Photoshop SDK the full absolute path which I obtain is in the default ANSI code page (CP_ACP) and I can convert it to Unicode using MultiByteToWideChar() API. However this works well when I have corresponding to document name language set in the "Control Panel -> Regional and Language Options -> Advanced -> Select a language to match the language version of the non-Unicode programs you want to use." For example if name of the document has Russian letters and chosen language in "Regional and Language Options" is also Russian the described conversion works well. If I change "Regional and Language Options" to English for example, full path returned by Photoshop SDK API (AliasToFullPath in PIUFile.cpp) for the document with Russian letters will contain "????????.psd" symbols.
So I need to have an ability to get absolute file path in Unicode. Is it possible in Photoshop CS2/CS3/CS4 for Windows? I have searched forum and SDK but could not find info on it.
Is it possible to have native HANDLE of the opened file to get file info using Windows API?
Please advice.
Below given slightly modified code from Photoshop CS3 which I use to get absolute file pat of the opened document.
Thanks and regards,
Sergey
std::string outFilePath;
int32 theID = 0;
SPErr error = kSPNoError;
error = PIUGetInfo(classDocument, keyDocumentID, &theID, NULL);
if (error == kSPNoError)
Handle theFileHandle = NULL;
error = PIUGetInfoByID(theID, classDocument, keyFileReference, &theFileHandle, NULL);
if (error == kSPNoError)
int32 length = sPSHandle->GetSize(theFileHandle);
Boolean oldLock = FALSE;
Ptr pointer = NULL;
sPSHandle->SetLock(theFileHandle, true, &pointer, &oldLock);
if (pointer != NULL)
outFilePath = (char*)pointer;
sPSHandle->SetLock(theFileHandle, oldLock, &pointer, &oldLock);

Hi All,
Does anybody know, whether it is possible to get Unicode file path of the current document in Photoshop via Photoshop SDK API or without them?
Thanks,
Serhiy

How to add the library document version to the parent Document content type?

Hi All,
I have a PWA instance with a project site for each project.
Each project site has its own document library.
Now I want to create several Templates to be available within each document library.
I have created the new content Site Content Types (Site Settings > Site Content Types) to fit my needs; each content type has the "document" content type as parent type.
Now I want include the "version" property (the dynamic value from the versioning) to each new document type, so I have tried to enable the "Information management policy settings" to the parent "document" type or the new ones,
including the label "{Version}", but I receive this error:The label reference, Version, could not be found.
So the only way to do this, is to open each site document library and make this change within it.
Why I can't enable the Lable at the Site level?
Thanks

Hi,
I can reproduce the issue by adding {version} or {_UIVersionString} in site content types > Document > Information Management policy settings > enable label.
As workaround, please create a document library, then add label in document library settings > Information Management Policy settings. Now save this document library as template and create new document library based on this template, the policy settings
will be saved for new document libraries.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

PLD copy to shown on the print document

Hello
What field or what is the trick to have a remark "copy" when you print a document which was already issued first
Thank you

Hi
I am sending the full steps for that, exacly as I did on my test system. Please just adjust the fields number accordling to the one you have in your system and for the documents you are working at (I did for A/R Invoice).
Add the following fields at the Page Header:
1. Field_1
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Database
Table: A/R Invoice
Column: Printed
2. Field_2
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Formula
Field_1=='N'
3. Field_3
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Formula
Field_1=='Y'
4. Field_4
General Tab
Link To: Field_2
Content Tab
Source Type: Formula
Original
5. Field_5
General Tab
Link To: Field_3
Content Tab
Source Type: Formula
Copy
Note: If you don't want to get 'Original' but only 'Copy' you can just remove the Fields: Field_2 and Field_4 from the solution.
I hope that helps.
Paulo Calado
SAP Business One Forums Team

Colors of the Icons in the Print Document Content Window

Similar Messages

Maybe you are looking for