Column A shows up on everypage of a large spreadsheet

The first column of my spreadsheet is gray and shows up on every page of a large spreadsheet. If I delete it from any page, it gets deleted from all. Any help would be appreciated.

Header Columns and Header rows can be set to repeat on every page in Print View.
Deselect the option in Inspector > Tables.
S.

Similar Messages

  • How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

    I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
    Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
    I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
    Best Regards,
    Drew

    Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
    The method of adding custom headers to searches is the same as the one described here for filters:
    http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

  • How to add a column that shows the difference of two metrics columns?

    I created a pivot table with two metrics columns. One metrics column has the aggregation rule of 'Min', the other has 'Max'. Now I want to add a column to show the difference of these two metrics for each row. Is this possible? How to do it? Thank you in advance.

    Use TimeStampdiff:
    TIMESTAMPDIFF(SQL_TSI_HOUR, MIN(xxxx), MAX(xxx))
    It's in the help file if you need more help.
    regards
    Alex

  • How can I add a column to show the website (web site) of an rss feed?

    I've got a lot of rss feeds coming into thunderbird. I organized some into folders, but also have a folder for several rss feeds as they adress the same topics and I prefer not to browse through 25 separate folders. However, the sender doesn't always make it clear which blog it's from, so I'd like to add a column which shows the website of the rss feed. (sender is often: [email protected], and there are different writers for a single blog who themselve have their own blog as well, so can't sort on sender name either).
    When opening an rss feed, it displays in the header: web site (with the space) and then the web adress. This is what I'd like to be able to see in my columns.
    I didn't see an option yet to customize columns, nor did I find an addon that does this.
    Does anyone know a solution?

    Thanks, that seems to work. I'm struggling to place the lightbox at the top of the page however - when I click the trigger I want the menu image to display anchored to the top of the page, but there's always a gap as it centers the image. Help is appreciated!

  • "Add a column to show each of these additional fields: " doesn't support person feild

    "Add a column to show each of these additional fields: "  doesn't support person feild
    I've seen that its not supported in 2010 version of sharepoint but I was hoping in the last 3 years  its been fixed for the 2013 
    Any idea if this will be fixed or not?

    Given that it hasn't been fixed so far, i doubt it.
    The reason it doesn't work for some columns is that they themselves  are a form of lookup column. I suspect MS have disallowed it to prevent looping, where a lookup column eventually starts trying to look up on itself. There may be other technical challenges
    to making a double hop lookup column.

  • Is there a predifined column which shows the number of support messages

    Hi,
    In test management work list (STWB_WORK), is there a predifined column which shows the number of support messages raised against a message (Yellow spark symbol), there is no ALV layout defined for this scenario, please advice is there any configuration required for this column to be displayed or a development has to be carried out?
    Regards
    Prakash Kalluru

    Hi
    Have you ever used the tab Messages in the same transaction
    It will list all the messages
    since its ALV display you can filter as per requirement
    Hope this solves ur prb
    Regards
    Prakhar

  • MTL_MATERIAL_TRANSACTION TABLE  column TRANSACTION_SOURCE_ID shows

    Dear All,
    MTL_MATERIAL_TRANSACTION TABLE column TRANSACTION_SOURCE_ID show null when transaction type is More order issue and Miscellaneous receipt
    Please guide how can i solve this iessue.
    Query
    SELECT
    MSI.SEGMENT1,
    MSI.SEGMENT2,
    MSI.DESCRIPTION,
    MSI.PRIMARY_UNIT_OF_MEASURE,
    (SELECT MTT.TRANSACTION_TYPE_NAME FROM MTL_TRANSACTION_TYPES MTT WHERE MTT.TRANSACTION_TYPE_ID = A.TRANSACTION_TYPE_ID) TRANSACTION_TYPE,
    A.*
    FROM
    MTL_SYSTEM_ITEMS MSI
    ,MTL_ITEM_CATEGORIES_V MIC
    ,MTL_TRANSACTION_TYPES MTT
    (SELECT
    DISTINCT
    M.TRANSACTION_DATE, M.TRANSACTION_ID , M.ACTUAL_COST , M.INVENTORY_ITEM_ID , M.ORGANIZATION_ID , M.SUBINVENTORY_CODE ,
    M.TRANSACTION_TYPE_ID ,
    M.PRIMARY_QUANTITY , M.TRANSACTION_QUANTITY , phpl.ITEM_DESCRIPTION , phpl.UNIT_PRICE , phpl.QUANTITY , R.PO_UNIT_PRICE
    from
    mtl_material_transactions m
    left outer join rcv_transactions r
    on m.SOURCE_LINE_ID = r.transaction_id
    left outer join (select * from po_lines_all pl join po_headers_all ph
    on pl.PO_HEADER_ID = ph.po_header_id) phpl
    on r.po_line_id = phpl.po_line_id
    ) A
    WHERE
    MSI.INVENTORY_ITEM_ID = A.INVENTORY_ITEM_ID
    AND MSI.ORGANIZATION_ID = A.ORGANIZATION_ID
    AND MIC.INVENTORY_ITEM_ID = MSI.INVENTORY_ITEM_ID
    AND MIC.ORGANIZATION_ID = MSI.ORGANIZATION_ID
    and A.ORGANIZATION_ID = 110
    --AND MIC.INVENTORY_ITEM_ID = MSI.INVENTORY_ITEM_ID
    --AND MIC.ORGANIZATION_ID = MSI.ORGANIZATION_ID                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    What are you talking about?
    This forum is for issues with the SQL Developer tool...
    Regards,
    K.

  • A matrix column that shows a field from a linked table

    Hello,
    I'm creating a custom UI form for a UDO of type document.
    This UDO (say FATHER) has one child table (say CHILD). I show its data in a matrix.
    Every line in CHILD links to a sales order line (RDR1).
    In the matrix I'd like to show:
    A) some columns from CHILD (I succeded)
    B) a linked button column that links to ORDR using CHILD.U_OrderEntry (I succeded)
    C) a column that shows RDR1.DocDueDate (how?)
    D) a linked button column that shows RDR1.ItemCode and links to OITM (how?)
    Something similar is done by B1 in pick list standard form (id 85), for instance.
    Can you help me solving issues C and D?
    I guess I should link my CHILD.U_OrderEntry and U_OrderLine with RDR1.DocEntry and LineNum.
    Many thanks!

    Hi Simone,
    I agree, my explanation was partial.
    When I am creating a new form, I'm basing every single piece of the UI on DataTable (I never use DBDataSource and UserDataSources only for Folders). One for the header, one for each Matrix/grid, etc.
    By doing this, it allows me to have the correct layout and validate the UI with the project manager (or the Customer, when this is me the project manager ).
    Then, I am creating the queries, to extract data from the DB exactly as the previously defined DataTables are expecting these data (so, calculating the LineId from the query...).
    And finally, this is the beauty of the design, DataTables allows to to extract (since 2007PL47?) the data from a DataTable as an xml String and to import it in a different DataTable.
    So, to make the full picture, I have a specific DataTable to execute queries, from which I'm extracting the xml definition to load it in the "UI's DataTable". It ends with a matrix.LoadFromDataSource...
    Definitions are staying as defined, querying and loading is sub-second time (depending on your SQL expertise), layout doesn't flicker...
    If you need an excerpt of code (frankly, I'd prefer you to write it with this "how to"), just ask.
    Regards,
    Eric

  • Two separate calculated columns - results show up only in one of them

    Hey,
    I've recently run into some peculiar behaviour in OBIEE (Oracle Business Intelligence 11.1.1.7.0). I'm using three attribute colums (deliv. on time, ordered, backlog) to calculate a monthly service level. In addition I'm using a customer ID number to separate our customers into export and national customers. I've three calculated columns - Service Level Export, Service Level Total and Service Level National. I'm using a simple case-statement to distinguish between international and national customers (When custID between xxx and yyy then...). The total service level column doesn't have a case-if calculation, only a couple of simple mathematical operations and it works fine.
    Now the problem is that the results show up only in one of those calculated columns containing case-if calculations - not both at the same time. Using a prompt in a pivot table I can verify that both columns get proper values but when I remove the prompt half of the values randomly disappear from these columns so that only one of the columns has a value for a specific month. The calculations in all three columns are identical - the only difference is that Serv. L. Exp. exludes a spesific CustID whereas the Serv. L. Nat. only includes that one CustID.
    Example - both Serv. L. Exp and Serv. L. Nat should have values for every month, now only one of them gets values
    Month          Serv. L. Exp.               Serv. L. Nat.               Total Serv. L.
    01                         15 %                                                       15 %
    02                         17 %                                                       17 %
    03                         13 %                                                       13 %
    04                                                          20 %                      20 %
    05                                                          22 %                      22 %
    I've a few months of OBIEE experience under my belt so I'm not that experienced but usually I've been able to figure out what's wrong on my own. This time, however, this leaves me dumbfounded. Any help or advice would be much appreciated.
    Regards,
    Silver

    Hi,
    Serv.L.Nat is calculated 100 * INVOICED / (ORDERED + DELAYED). For National Service Level the case statement (including the calculations) is as follows (the inner CASE limits the Serv.L.Nat per cust to a range of 0 - 100 %):
    CASE WHEN "fact"."CustID" = 100001 THEN (
         CASE WHEN Serv.L.Nat > 100 THEN 100
         WHEN Serv.L.Nat < 0 THEN 0
         WHEN Serv.L.Nat IS NULL THEN 0
         ELSE Serv.L.Nat
         END)
    END
    For Export the sql is exactly like the one above, barring the reversed condition.
    Regards,
    Silver
    PS. The above is a burst of pseudoSQL so don't mind the typos, the actual code is tested to work as intended... barring the fact that something's wrong with getting the values to appear.

  • How do you use the status column to show progress of a step in an OI?

    Hi everyone,
    I was just doing a little browsing and noticed the picture at the top of the http://www.ni.com/teststand/ web page.  It shows a progress bar in the status column of a step being executed.
    I have several applications where this would be a very useful addition.  I use the progress bar at the bottom of the OI and sequence editor regularly, but would very much like to show progress of an individual step in the status column.  It would be particularly useful where you turn the tracing off into a sequence but want to see that progress is being made through the steps within it...
    Anyone know how to do this?  I have been unsuccessful in trying to find examples....
    Cheers,
    Barry

    James,
    I believe your answer to Bazza's question also applies to my situation, but I wasn't sure so I thought I would ask.  I am working on a custom TestStand operator interface in LabVIEW using the UI controls.  I would like it to behave as closely as possible to the old Test Executive.  Specifically, I would like the operator to be able to see the contents of the sequence file, interact with them, and see the execution results all in the same view.  Is that possible?  In other words, can I display and interact with a sequence file (display the sequence steps, run selected steps, loop selected steps, etc.) and display the sequence's execution results (including tracing) in the same SequenceView control or do I have to use 2 of them?
    Thanks,
    Ryan Wright

  • Custom list column not showing up in View Order by or Group by dropdown list

    Hi All,
    I have created a custom list with a custom column called "Description". Some items in the list do not have a description. What I wanted to do is create a view where the items with a description show first, and the items with no description are
    at the bottom of the list. I thought I could make a simple view that uses the Order by or Group by on the description column.
    The problem I am having is the description column doesn't show up in the dropdown list for either Order by or Group by within the custom view. Can someone please tell me why this happens and if there is anything I can do to rectify this problem.
    I hope you can help
    Colin

    Hi,
    I believe the "Description" field type is Multiple Lines of Text. Sorting doesn't allow in this field type. In order to do the sorting, you would require to create additional column like single line of text column (note that it supports only 255
    chars and require to truncate the data if more than 255) and update the data using event receiver or workflow. and do the sorting with that column.
    kmhsad

  • Drive column not showing in finder

    Hi sorry if this is dumb but I'm new to Mac. My friend's cat sat on my keyboard and now Finder is not showing the column that listed drives, cds, etc, it just starts from within Macintosh HD. I have the settings checked to show Hard Discs, External Discs, CDs and DVDs

    Did you check in Finder on your menubar > View menu > Show Sidebar?
    -mj

  • Created column not showing in the Document Library View for a Custom Content Type based on Document

    We have a custom content type based of Document Content Type. The OOTB "Created" column does not show up in the view as well as in the Site Settings -> Columns.
    But it shows up in the Display Form and Edit Form of the Item at the bottom "Created at " by " " and "Modified by" at by ""
    Would anyone know how to make this column appear as part of the view ?
    thanks,
    Harsh

    Hi,
    They should by default be possible to add to a view. The only reason they would disappear from the UI if someone has changed the attribute of the Field to hidden = true. You can verify that with PowerShell and if so you can use PowerShell to revert the setting
    to false.
    $w = Get-SPWeb http://dev13$f = $w.Fields.GetFieldByInternalName("Created")$f.Hidden$f.Hidden = $false$f.Update()

  • Pivot table total on a computed column not showing when using a filter

    I have this strange issue. I will try to explain.
    I have three columns in my report - Delivered Qty, Opened Quantity, and the third one is computed that is (Delivered Qty - Opened Qty). The data is displayed in a table by quarter. So basically I have Quarter, Delivered Qty, Open Qty, Not Opened Qty. I also have the total row. A pie chart shows the opened vs. un-opened quantities. It all works fine.
    The issue is when I add a prompt and the corresponding filter, the total for the computed field is blank. This happens whether it is pivot table or a regular table. That causes the pie chart to show 100% for the Opened qty.
    When I remove the filter, it works again. I can see the total for the computed field and the pie chart looks great.
    Can anyone please help me? I have a number of hours trying to play around with this and also looked in the forum to see if any one might have already discussed similar issue in the past. I could not find any.
    Thanks.

    I found the issue with my table total not showing up. Basically the new materialized view had its own data table alias. However, in the filter I was using date columns from different date table alias (copy and paste problem). As soon as I changed to the right date columns from the associated alias table, the row total showed up.
    Thanks anyways for your support.

  • More than 34 columns to show in a report

    hi,
    I select 50 columns from a table; in the report I can see only up to 34; where is this limit set and how can I change it?
    (It is not the field: "Maximum number of generic report columns" in tab Region definition, this has no impact for the report);
    all 50 atttributes are ticked to show.
    Thank you for any hint
    val
    Application Express 3.1.2.00.02

    Hi,
    Copy the source of your report. Delete the report and then recreate it with the query. All should display then.
    Mike

Maybe you are looking for