Column & Row Headings

Is there any way in Numbers to suppress the display (viewing and/or printing) of row and/or column headings? For example, I don't want to see A,B,C,... across the top or 1.2.3... down the left side. Besides, by suppressing these displays I should be able to gain some space both vertically and horizontally.
I'm coming off of AppleWorks and life used to be so simple and easy then!!

I'd use the same way as I use to send copies of tables in emails that I do not want changed.
If smaller than the screen use Quick keys, command shift 4 and draw around the table with the curser while the table is selected = png on the desktop showing ABC 123 etc, ready to attach to email or print for that matter.
Larger than the screen, use the print view and play around with the slider first
Note, command shift 3 for whole screen.
Have fun.

Similar Messages

Numbers moving column & row headings

I have a large document which has lots row and column headings (in the grey area) but they keep moving.
Is there any way I can freeze these so they stay static but the information below moves. ?
Just starting to use numbers so all your help is absolutely invaluable.

Loulou,
The gray area is a header area. Being gray doesn't make it a header area, but header areas are shaded gray by default to differentiate them from the body of the document. There are two elections that you can make regarding the header rows and columns. If you are in Print View, you can choose to have the headers repeat on every page. If you are in Sheet View, you can Freeze Headers. The controls are here, with the table selected:
Sheet View:
Print View:
Regards,
Jerry

Columns, cells and row headings

My printer continues to print column headings, cells and row headings even though none of these boxes are checked under the Appleworks (6.2.9) pull down menu

Welcome to Apple Discussions
When an application stops working as it should, it's likely due to corrupt preferences. You can follow the steps in this user tip or use the reset function of Dale Gillard's Sidekick.

Alv with row headings

Hi,
        Can any one send sample code for the follwing requirement.
I wnat to display alv with column and also row headings.
Ex:
         date1      date2       date3
orderno 01/01/2006 01/02/2006 01/03/2006
quantity 100         200        300
Thanks in advance.
Kiran.

Hi Kiran,
       First get the Final or Output Internal Table as
Date     Orderno    Qty
       then Convert it into
Date
Orderno
Qty
       You'll get what you have asked for.
Cheers,
Prashanth

How do I locate column/row (number) selected in applescript

I require a simple script to adjust the column widths of the current selected column only. I want to base it on a script below which I found on the internet. This script adjusts multiple column widths to the value input and adjusts the stub column to the remaining space. I would like to know how easy it is to create a script with a similar input window that adjusts the column/row selected leaving the others in tact.
tell application "Adobe InDesign CS4"
    activate
    if class of parent of selection is not cell then
        display dialog " Do not highlight any cells " buttons " OK " default button 1 with icon caution
    else
        set monTableau to parent of parent of selection
        set NbColonnes to count columns of monTableau
        set monBlocTexte to parent text frames of selection
        set maBoiteTexte to item 1 of monBlocTexte
        set {y, x, h, l} to geometric bounds of maBoiteTexte
        set largeurBloc to (l - x)
        tell text frame preferences of maBoiteTexte
            set NumColTexte to text column count
            set largGout to text column gutter
        end tell
        display dialog "Width of columns (mm) " default answer 20
        set largeurTexte to text returned of the result
        set largcol2 to (largeurTexte as integer)
        set largcol1 to ((largeurBloc - (NumColTexte - 1) * largGout) / NumColTexte - (NbColonnes - 1) * largcol2)
        if largcol1 < 2 then
            set largcol1 to ((largeurBloc - (NumColTexte - 1) * largGout) / NumColTexte) / NbColonnes
            set largcol2 to ((largeurBloc - (NumColTexte - 1) * largGout) / NumColTexte) / NbColonnes
        end if
        set width of column (1) of monTableau to largcol1
        repeat with counter from 2 to NbColonnes
            set width of column (counter) of monTableau to largcol2
        end repeat
    end if
end tell
Your help will be greatly appreciated
Thanks
Dave Williams

Perhaps like this:
tell application "Microsoft Excel"
    set i to first row index of active cell
end
log i
Regards,
H

Uneven columns/rows

Does anyone know how to create uneven columns/rows in a table? I'm trying to design the attached table
When i do they all come out even.
here is my code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<table border="1">
<tr>
    <td rowspan="2">logo</td>
    <td bgcolor="#0d4881">Weekly newsletter</td>
</tr>
<tr>
    <td>Wednesday, July 15</td>
</tr>
<tr>
    <td rowspan="2">handshake photo</td>
    <td height="70"bgcolor="#0d4881">In the News</td>
</tr>
<tr>
    <td rowspan="3">lkajsfkljasfsaflsafjsajljsajlkajslfjalsjflkjsalfkdj df laks fjalskdfj ;akslfd lkajsfkljasfsaflsafjsajljsajlkajslfjalsjflkjsalfkdj alskfjdalksjfdl ksaalksjdf laks fjalskdfj ;akslfd lkajsfkljasfaflsafsjsajljsajlkajslfjalsjalskfjdalk sjfdl ksaalksjdf laks fjalskdfj ;akslfd lkajsfkljasfsaflsafjsajljsajlkajslfja lsjflkjsalfkdj alskfjdalksjfdl ksaalksjdf   laks fjalskdfj ;akslfd lkajsfkljasfsaflsafjsajljsajlk ajslfjalsj</td>
</tr>
<tr>
    <td>current</td>
</tr>
<tr>
    <td rowspan="3">lkajsfkljasfsaflsafjsajljsajlkajslfjalsjflkjsalfkdj alskfjdalksjfdl ksaalksjdf laks fjalskdfj ;akslfd lkajsfkljasfsaflsafjsajljsajlkajslfjalsjflkjsalfkdj alskfjdalksjfdl ksaalksjdf laks fjalskdfj ;akslfd lkajsfkljasfsaflsafjsajljsajlkajslfjalsjflkjsalfkdj alskfjdalksjfdl ksaalksjdf laks fjalskdfj ;akslfd lkajsfkljasfsaflsafjsajljsajlkajslfjalsjflkjsalfkdj alskfjdalksjfdl ksaalksjdf laks fjalskdfj ;akslfd</td>
</tr>
<tr>
    <td height="30"bgcolor="#0d4881">Contact us</td>
</tr>
<tr>
    <td rowspan="3">lkajsfkljasfsaflsafjsajljsajlkajslfjalsjfl afjsajljsajlkajslfjalsjflafjsajljsajlkajslfjalfjsajljsajlkajslfjalsjfl</td>
</tr>
<tr>
    <td bgcolor="#0d4881">keep in touch</td>
</tr>
<tr>
    <td>twitter fabkjls</td>
</tr>
</table>
</body>
</html>
Thank you in advance

Copy & paste this code into a new, blank document. Save as test.html. Adjust CSS borders, colors and background styles as desired.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Document</title>

<style>
margin: 0;
padding: 0;
-moz-box-sizing: border-box;
-webkit-box-sizing: border-box;
box-sizing: border-box;
body {
width: 1000px;
margin: 0 auto;
background: #CFC;
font-family: Cambria, "Hoefler Text", "Liberation Serif", Times, "Times New Roman", serif;
font-size: 100%;
div {
width: 49%;
border: 2px solid #999;
float: left;
background: #FFF;
color: #000;
font-size: 16px;
div h2 {
background: #09C;
color: #FFF;
padding: 12px;
border-bottom: 3px solid #999;
div p { padding: 12px }
div li {
margin-left: 45px;
padding-left: 12px
footer {
clear: left;
background: #999;
padding: 12px;
color: #FFF;
width: 100%
</style>
</head>
<body>

<div>
<h2>Heading 2</h2>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Mauris vitae libero lacus, vel hendrerit nisi!
Maecenas quis velit nisl, volutpat viverra felis. </p>
<h2>Heading 2 </h2>
<ul>
<li>List item</li>
<li>List item</li>
<li>List item</li>
<li>List item</li>
</ul>
</div>

<div>
<h2>Heading 2</h2>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Mauris vitae libero lacus, vel hendrerit nisi!
Maecenas quis velit nisl, volutpat viverra felis.
Vestibulum luctus mauris sed sem dapibus luctus.
Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius.
Quisque varius scelerisque nunc eget rhoncus.
Aenean tristique enim ut ante dignissim.</p>
<h2>Heading 2</h2>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Mauris vitae libero lacus, vel hendrerit nisi!
Maecenas quis velit nisl, volutpat viverra felis.
Vestibulum luctus mauris sed sem dapibus luctus.
Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius.
Quisque varius scelerisque nunc eget rhoncus.
Aenean tristique enim ut ante dignissim.</p>
</div>
<footer> <small>© 2013 Your Company Name. All rights reserved.</small> </footer>
</body>
</html>
Nancy O.

Column / Row Spanning in UIX table

Hi There,
Anybody know how to achieve column/row spanning when using the uix databound table?
For example, i would like a table which looked similar to the following:
     | Cell1 | Cell2 | Cell3 |
     | A spanned cell         |
     --------------------------Is it also possible to combine this with row spanning in a UIX table and then further combine it with the single-selection bean, producing an output similar to the below (how complex can i make this :)) :
     | Select | Column 1 | Column 2 | Column 3 |
     |        | Cell 1 | Cell 2 | Cell 3 |
     |   o    |---------------------------------
     |        | A spanned cell                |
     |        | Cell 1 | Cell 2 | Cell 3 |
     |   o    |---------------------------------
     |        | A spanned cell                |
     -------------------------------------------I guess I should add that both rows on the same select line would come from the same row of the data source.
I get the impression that spanning can be done from looking through the BLAF standards at http://www.oracle.com/technology/tech/blaf/specs/tables.html#banding_group_colrow, although maybe this just related to the table layouts (where spanning of this type is easy enough) and isn't applicable/implemented for the databound table itself?
Anyway, thanks in advance for any help :)
Cheers,
Lee

Hi ,
I have updated the function and its working fine.
alter
FUNCTION [dbo].[fnGetFirstOcurrences]
(@Text nvarchar(max),
@Delimiter
char(1),
@StopAt
smallint)
RETURNS
nvarchar(max)
BEGIN
DECLARE @Return
nvarchar(max),
@Final
int = 0,
@Times
smallint = 1,
@Delimiters
smallint
SELECT @Delimiters
= LEN(@Text)
- LEN(replace(REPLACE(@text,'
','#'), @Delimiter,
IF
(@Delimiters
>= @StopAt)
BEGIN
WHILE @Times
<= @StopAt
BEGIN
SET @Final
= CHARINDEX(@Delimiter, @Text
+ @Delimiter, @Final
+ 1)
SET @Times
= @Times + 1
END
SET @Final
= @Final - 1
SELECT @Return
= LEFT(@Text, @Final);
END
ELSE
BEGIN
SELECT @Return
= @Text +
REPLICATE(' '
+ @Delimiter,
(@StopAt - @Delimiters)
- 1)
END
RETURN
ISNULL(@Return, @Text)
END
Thanks
Thankx & regards, Vipin jha MCP

How to avoid column/row nesting in crosstab

Hi,
I am using Cross Tab to get out put in following format. But every time i insert new column/row in cross tab it gets nested. I am trying to get following format. Could you please help or any pointer
                           Total          Col1+Col2 Col1          Col2          Col3+Col4     Col3          Col4
Group          Total                  0.00          0.00          0.00          0.00          0.00          0.00          0.00
          Sub Group1          0.00          0.00          0.00          0.00          0.00          0.00          0.00
          Sub Group 2          0.00          0.00          0.00          0.00          0.00          0.00          0.00
Regards,
Kuldeep
Edited by: Kuldeep Chitrakar on Apr 9, 2009 7:24 AM
Edited by: Kuldeep Chitrakar on Apr 9, 2009 7:31 AM

Hi Kuldeep,
Condition 1:
If you try to take one Dimension and one measure like Year and sales revenue using e-fashion demo universe then new column inserted will be nested when using cross tab where the measure values will be spread across multiple columns.
In this case you have to use condition to refer individual column names like
=[Sales revenue] Where([Year]="2001" )+ [Sales revenue] Where([Year]="2002")
and calculate the sum.
Select the measure column in the cross tab then click the u201CInsert Sumu201D button it will display the sum in the last column of the cross tab then you can modify the formula generated to specify the condition which columnu2019s sum you want o display in that column.
Ex: Use e-Fashion universe and take Year and sales Revenue turn it to cross tab and follow the process I mentioned.
Condition 2:
However if you use one dimension and multiple measure like the one you are using where you are trying to calculate sum of col1+col2 and so on. In this case you can directly insert the column and calculate the sum of column referring their names.
Ex: Use e-Fashion universe and take objects Year, Sales revenue. Quantity sold, Discount, margin here you can directly sum individual column values like sales revenue, quantity sold and discount +margin by inserting the column in between the columns using u201Cinsert Columnu201D
I Hope this helpsu2026
Thanksu2026
Pratik

Appraisal: Setting Column/ Row Access for substatus

Dear All,
I was setting column & row access for the Appraisal template.
I have already set it for the three main status i.e. "In Planning", "In Review" & "In Process".
But i am unable to set it for different substatuses i.e. substatus of status "In Process". Actually i want to give different access for different substatus of the main status.
Looking for your valuable advice.Please consider this matter as urget.
Thanks & regards,
Tarun

Hi Tarun
How did u do it thru ABAP? Could you kindly explain me in detail? Have u changed any standard FM? Please explain
Thank you in advance

Display Column & Table Headings in Pivote Table

Hi,
Can we display the Table Headings in Pivote Table ??
There is an option of displaying the same in Table view,is there any way of displaying the same in Pivot Table View??
Thanks

Hi,
Try this.
Table heading:-
We do not have any direct option to do this.
But as a workaround, we can achieve this using the following approach.
Add a column to the criteria. Use the following in the column formula.
'<table width="100%" align="center" bordercolor="#C9CBD3"
frame="void" rules="cols" cellpadding="0" cellspacing="0">
<tr>
<td align="center" width = "200">
'|| 'This Month' ||' </td>
<td align="center" width = "200">
'|| 'Accumulated YTD' ||'</td>
</tr>
</table>'
Where This Month & Accumulated YTD are the table headings.
Do not forget to change the Data Format to 'HTML'
Place this column on top of measures labels in Columns Section.
But, you need to fix the width of all the measure columns and adjust the <td> width accordingly.
"Display Column & Table Headings" equivalent for pivot tables?
Hope this help's
Thanks,
Satya

Report painter - eliminate zero columns/rows

Dear Experts,
Can anyone tell me how to hide (or) remove the columns and rows contains zero values, in a report which is developed by report painter.
Thanks
Balu
Edited by: balu 18 on Feb 20, 2010 11:05 AM

Hi
It is available to control the display treatment for column/row item with zero amount by Standard Layout.
1. From report
If you change this behavior online during checking report such as cost center report: S_ALR_87013611, go to menu -> Settings -> Report Layout.
You can hide/unhide the column/rows with zero value in Tab Rows and Columns.
2. Default setting for report execution
As described above, this setting comes from Standard Layout.
You can change it by transaction code GR12.
Best regards, Takashi

We used to be able to sort by multiple columns/rows at once by right clicking on the header and choosing show more options-how do we do that in the new Numbers?

We used to be able to sort by multiple columns/rows at once by right clicking on the header and choosing show more options-how do we do that in the new Numbers? It doesn't appear anywhere. Do I now have to sort massive tables by each column one at a time now? Also there used to be an easier way to merge/unmerge cells without me having to go to the table menu each time. Am I missing something?

Multiple column sort is a missing feature in the new version. Hopefully soon to return. You can do a multicolumn sort by sorting one at a time in reverse order of importance.
For merging and unmerging cells, I select the cells and right click to bring up the contextual menu. Merge and unmerge are on the menu. You could also create keyboard shortcuts for Merge Cells and Unmerge Cells in the Table menu.

Table headings and column/row sizes

I have mapped my FM table format to a table style defined in my CSS. However, I have the following issues with the resulting RoboHelp tables:
I have a header row in the FrameMaker table, but the header doesn't come over into RH. All of the table rows are <td> instead of <th>. Therefore, the shading defined in my CSS for the table header row does not appear.
A bunch of inline formatting that I don't want is coming over, defining the table width and the row width and height. Here's an example:
<table class="formatA" cellspacing="0" width="600">
    <tr style="height: 18.00pt;">
        <td style="vertical-align: top; padding-left: 6.00pt; padding-top: 3.00pt;
             padding-right: 6.00pt; padding-bottom: 3.00pt;" width="198"><p>Report/Visualization</p></td>
        <td style="vertical-align: top; padding-left: 6.00pt; padding-top: 3.00pt;
             padding-right: 6.00pt; padding-bottom: 3.00pt;" width="402"><p>Description</p></td>
    </tr>
Is there any way to get RH to recognize table header rows?
Also, is there any way to prevent the size information from coming over? What I'd like is for the table width to be 100% and the cell widths and heights to be determined by their content (which would happen automatically if the inline formatting weren't added).
If there isn't a way to accomplish this, then I'd probably be better off not trying to map the table styles and just going with "Source". The sizes would still be fixed, but at least the shading would appear.

Forget FM for a moment. I think that if you create a table in RoboHelp using TH you will find RoboHelp simply does not understand TH.
The more people who report a bug or request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Adding columns/rows to a jTable in netbeans

Yes, i realize there are other threads covering this, but none of them have seemed to work for me.
I'll start by explaining by what i'm trying to do, so if you have another suggestion, I'd gladly listen.
I have a very long list of data, some 200+ parameters that will be tested multiple times. So what i would like to do, is to create a table, with the name of the parameter always showing, the ability to scroll through the parameters, and the ability to color the parameters a certain color based on value.
without color maybe look like the following:
param1 param2 param3 param4 paramN
Test 1 12345 123124 123123 123123 ........
Test 2 123123 123123 123123 12312312
(horizontal scroll bar to go through the N params)
unfortunatley, i'm having difficulty finding out how to change the number of columbs/rows on the fly (the number of parameters is not static and could vary by hundreds).
I know it has something to do with the table model, and i've found where it is initilizing the table in the code, but i can't find where i can gain access to the table model itself so i can add columns as i need to.
I'm really new to this stuff, but I pick up quickly, any links to tutorials or suggestions would be awesome. Thanks guys.

Swing tutorials.
The parameter names are column headings which are displayed in the table header.
The display of data in cells is the job of a renderer. Customizing the renderer might give you different colors based on the value of the cell.
Here is the general tutorial for tables:
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
There are oodles of JTable articles on the Interweb.
Good luck.

Custom Report: Columns with headings merged

Hello All,
Is there a way to get a custom layout in reports as depicted in the following image -
http://tinypic.com/r/20sbqtx/6
I can generate the simple layout with A, B1, B2 and B3 headings, but I'm not sure how and where to aggregate the B1, B2 and B3 into B.
Thanks

Create a custom report template including an extra row with column spanning in the header section of the template.

Column & Row Headings

Similar Messages

Maybe you are looking for