COM License Bridge Serious Problem

Dear SAP Forum Team,
I am facing serious problem .
We have developed an Addon .
For restricted use ,  i have used COM Bridge License of 8.8 for controlling
Add-on user also put some validation so that it cannot be used by other company using COM bridge.
Addon is working fine on B1 Server but when it is used at B1 client, addon
is getting stopped.
This is because on Client m/c COM Bridge is not working
Operating System is Windows Server 2008 R2 Standard
I am clueless what to do.
Any help from you will be greatly appreciated

Hi,
Install your client Machine  COM License bridge setup.
Regards,
siva

Similar Messages

  • COM License bridge :addons works fine on server side but not on client side

    hi,
    i'm using the com license bridge to fetch license information for my addon. When i start my addon on the server where the license bridge was installed and registered everything works fine.
    But when i start my addon at client side the following error occurs:
    System.Runtime.InteropServices.COMException(0x80040154): Retrieving
    the COM class factory for component wiht CLSID
    {80D2BE0E-15FF-4793-A4DE-0C053B19D0A} failed due to the following
    error: 80040154
    at WindowsApplication1.CLicense..ctor()
    Can anybody help me?
    thanks
    Markus

    Hi,
    The following is written in the COM License Bridge documentation in SDN (https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/508623e3-425c-2910-38be-cbe56e65930c):
    "Please note that the COM License Bridge will only work on the system where the actual License Service is running."
    Regards
    Trinidad.

  • COM License Bridge for Busienss One 8.81

    I have tried using the existing COM License Bridge from 8.8 and it does not work.  I also need one that won't expire in 90 days.  All I need to do is get the hardware key of the license server programmatically.  How can I do this in 8.81?

    I have managed to create my own interface to the license server using IIOP.NET:
    http://stackoverflow.com/questions/6031381/how-to-access-corba-interface-without-idl-or-late-bound-invoke-remoting-methods/6048136#6048136

  • COM License Bridge support in 8.8

    Hi
    I am migrating a system from 2005A to 8.8. There is an existing console program that connects with the license API using the COM License Bridge. This does not seem to work any longer with 8.8. Does anyone have any experience with the COM license bridge and 8.8? Is it the case that I will have to rewrite my program and recompile to handle any differences in the API?
    Thanks.

    Hi,
    A new version of the COM License Bridge for B1 8.8 is already availabe in SDN:
    http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/007a9ef5-9a9c-2d10-f3bc-94f765f235ce
    Hope it helps
    Trinidad.

  • COM License Bridge

    Hai To All,
            Does anyone have idea abt the COM License Bridge to CORBA License Manager????????????////
           How to apply in our Addon??? and How to check our Addon????
    Regards,
    Anitha

    Dear ani nazir,
    The add-on license is like the B1 license that one license is assigned to one user.
    The difference is that the B1 license has two concurrent constraint for one user, but add-on license does not have this constraint.
    For example, the B1 user 'manager' can use B1 with two instance concurrently, however, it still is one user.
    If you give one customer two licenses, then the customer can assign two user to use the license, but there are not concurrent constraint, means that multiple instance for one user can use the add-on concurrently.
    But If the add-on is used in B1 application(UI API add-on), the user will have two concurrent constraint for use B1 license.

  • Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

    I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
    Here is a quick note from the event viewer:
    The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. 
     Process ID: 1138 
     Start Time: 01d07dcede19c458 
     Termination Time: 15 
     Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE 
     Report Id: 
    Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
    this add-in and check to see if an update is available. Do you want to disable this add-in?.
    I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
    someone could help me get to the root cause of the matter.
    My environment is as follows:
    Windows 7 x64 SP1
    Office 2010 v 14.0.7128.5000
    Adobe Reader MUI X and Adobe Acrobat X
    Feroze

    Hi,
    As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
    I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
    Or contact the support of Adobe and see if there is a known compatibility issue or not.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in.

    I've installed Adobe Presenter V7.0.7 Build 7746. When I open an existing PowerPoint file and try and use Presenter, I get the following error: PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in. If you have seen this message multiple times, you should disable this add-in and check to see if an update is available. Do you want to disable this add-in?
    No, I don't want to disable it. When I click No, PowerPoint stops working. I get a message that says: Microsoft PowerPoint has stopped working. A problem caused the program to stop working correctly, Widows will close the program and notify you if a solution is available. My only choice is to click the Close program button.
    When I open the PPT file again, I get the same "experienced a serious problem" message. If anyone has a solution to this, I'd appreciate knowing what it is. It took me a while just to get the Presenter option to appear in the PowerPoint toolbar. Now that I have it, it's not working.
    Thank you!

    Thank you for your quick reply. Here are the answers to your questions.
    1. The file I'm having issues with was not created using any version of Presenter. It is simply a PowerPoint file.
    2. The file is a PPT not PPTX.
    3. I am running Windows7 and Office 2010.
    I think I might have found the solution to the problem. I opened the PPT file and saved it as a PPTX file. Then I clicked the Presenter option in the PowerPoint toolbar and was able to select different Presenter options with no issues. I opened other PPTX files and I did not get the error window stating 'PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in'.
    This seems to work. So, it appears that any PPT file needs to be saved as a PPTX file before using Presenter. If you have another solution that I might be able to keep in my back pocket (in case this happens again and what I did does not work), then please answer. Otherwise, I'm good now.
    Thanks!

  • I have serious problems with I OS 6 - I am loosing internet connection after a few seconds or minutes. What can I do? Can I come back IO S 5.1.1.?

    I am experiencing serious problems after downloading iOS 6. I am loosing my connection after a few seconds/minutes. What can I do? Can you come back to 5.1.1.? How can I do that?

    You can't downgrade the iOS.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Serious problem with TSCAL per user Licensing (Event 4105 on Licenseserver)

    Hello,
    i've got a problem with Terminalservice-Licensing: We migrated our AD from W2003 to W2008. At the same time, we updated our Terminalservice-Licenseserver to W2008 (Memberserver, no DC). We are using per-user TSCAL licensing. The problem is, that for (nearly) every user that logs on to a W2008 Terminalserver, an event 4105 is generated in the eventlog of the Licenseserver, that  means that the licence server cannot update the ad user properties when he delivers the cals.
    We have discovered that the terminalserver-licenceserver group is under the security properties of the user listed but has no rights. For new created users the rights "terminalserver-licenceserver read/write" are correctly set and for those users no event 4105 is generated. The problem is, that License-reporting (usage) is only working for those newly created accounts and not for old ones. Why doesn't the terminalserver-licenceserver group have the rights to modify the Terminalserver-AD attributes for older accounts (these accounts were created when the domain-level was W2003)??? Is there a workaround or hotfix from Microsoft to correct the securitysettings ??
    Many thanks
    Ralf

    Hello Ralf,
    Thanks for your post in our forum.
    Based on my understanding on your post, you have met the following issue:
    You have migrated the Active Directory domain from Windows Server 2003 to Windows Server 2008; You have also upgraded the Terminal Server License Server from Windows Server 2003 to Windows Server 2008. After that, when the existing terminal users access the Terminal Server, an Event ID 4105 is logged to claim that the License Server fails to update the AD user’s properties.
    According to the analysis on the second paragraph of your post, I think it is a known issue caused by insufficient permissions of the migrated users created in Windows Server 2003 domain environment. As you’ve found, the permissions required are for the Terminal Services Licensing Servers
    group:
    ·          Read Terminal Server license server
    ·          Write Terminal Server license server
    To fix this issue, please give these two permissions to the existing users.
    After that, please confirm if the License Usage Report is working for the old users.
    For more information about Event ID 4105, please refer to:
    Event ID 4105 — Terminal Services Per User Client Access License Tracking and Reporting
    http://technet.microsoft.com/en-us/library/cc775179(WS.10).aspx
    Please feel free to let me know if I can provide any further assistance. Thank you for your cooperation.
    Lionel Chen
    TechNet Subscriber Support in forum
    If you have any feedback on our support, please contact [email protected]

  • When I receive word documents via my yahoo on my mac, the format always come up as a TEXTEDIT doc.  This is causing me serious problems.  How do I enable my documents to open in the original format it was sent?

    when I receive word documents via my yahoo on my mac, the format always come up as a TEXTEDIT doc.  This is causing me serious problems.  How do I enable my documents to open in the original format it was sent?

    Do you have Microsoft Word installed on your Mac? If so, you can reassign all .doc files to Word by selecting the file in Finder and choosing "File > Get Info" from the menu. In the window that opens look for "Open with" and change the entry to "Microsoft Word".

  • Some serious problems with Mountain Lion

    Hi everyone,
    I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
    - Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
    - Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
    - Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
    Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
    Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.

    HI,
    - Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
    Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
    What Messages to what type of Buddies or Contacts ?
    This
    I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
    WIll be part of the Issue as will be DNS issues.
    mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
    In this case mDNSresponder also being stopped will stop DNS working.
    I would guess if you have resolved these that you can Chat to people again.
    4:33 PM      Friday; July 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Com Corba Bridge

    Does anyone succesfully use EJB or CORBA
    with the Oracle Com Corba Bridge
    on Oracle 8.1.6?

    In case anyone else is looking at the License API, I've been asking SAP support these questions also, and they've confirmed that the License API is still available in 8.8, is still CORBA based, and that SAP has no developer documentation or other information on it at all apart from the example bridge to COM code. They also say that they will not support any issues with the bridge.
    So, I'm left with two sets of questions really - one set is around the commercials and licensing of samples on the SDN site here (my questions about the license terms that appear when you download the bridge, and about redistribution). The other set is around ownership and maintenance of the bridge - if it isn't an official SAP supported component, it would seem if we used it we are at the mercy of whoever is maintaining it in terms of support and maintenance, presumably only contactable through this forum.
    This isn't a big problem necessarily. As long as the License API itself continues to be supported by SAP we could create our own solution if we found the bridge was abandoned. The lack of documentation on the CORBA interface is a problem, but I could probably reverse engineer it from the sample bridge code if only I had the missing files from the source download!
    So, has the bridge been abandond? Who is maintaining it if not? Could they provide me with the missing files?
    Regards,
    Greg

  • Serious problems including battery overheating

    My dad and I both bought Revolutions and have had the same issues with our phones (listed below). We truly believe that the LG Revolution is a defective phone - what are the odds that we would both get "lemons"? While at the Verizon store on 3/13, the store, corporate customer service, and LG claimed to not be able to do anything for us except send us refurbished phones or return our phones to LG and have them worked on (HA. Seriously? Go without a phone? We don't have a land line anymore - might as well dump us on a deserted island). We were notified today, 3/15 that the phones were in the store ready to pick up, but they didn't come with new batteries! SERIOUSLY?!?! THE MAJOR ISSUE WITH BOTH IS THE BATTERY OVERHEATING! These phones are bound to either burn us or kill us. We don't want someone else's "fixed" phone, because it will just do the same thing! Unless Verizon will help us, I'm afraid we are going to get iPhones from another provider, as well as go to the BBB to file a formal complaint. I really don't want to, but I can't believe how much we have spent for our little death machines. We really hope Verizon will cooperate and uphold the standards they set forth in their employee handbook. We would love to be contacted by someone who can help. Please, don't give us the run-around. As anyone can see, factory resets, changing settings, etc. don't work. We have put up with those suggestions for months with no improvement.
    My Dad's Revolution:
    Bought LG Revolution ~July 3, 2011 for $250 + taxes & fees, car charger, (and eventually extra chargers). Over $300 total put in.
    Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My dad's chest was almost burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
    Not receiving text messages and picture messages that are sent
    Internet doesn’t work properly - only when it feels like it
    Loses data connection between 3G/4G/Wireless
    Not always getting voice mail notifications
    Phone burned up 2 wall chargers
    Freezing
    Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
    Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
    Not keeping a charge
    Called sister next door and Dad could hear them, but she couldn't hear him. He called back and he could hear her fine, but she said he was very "scratchy" - keep in mind this is NEXT DOOR.
    My Revolution:
    Bought LG Revolution ~July 9, 2011 for $250 + taxes & fees, (eventually, multiple) car charger(s), insurance plan, (eventually, additional wall chargers) $400+ for the total cost
    Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My thigh has almost been burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
    Paying for “Unlimited Data” and phone constantly says “Mobile Network State: Disconnected”
    Not receiving text messages and picture messages that are sent
    Not being able to send text messages or picture messages
    Getting the same text 3-4 times
    Sending a text once and recipient getting it 3-4 times
    Internet/apps don’t work due to no data
    Loses data connection between 3G/4G/Wireless
    Not always getting voice mail notifications – getting voice mails 14+ days late. This creates a serious problem for time sensitive messages.
    Phone burned up 4 wall chargers and 2 car chargers
    Freezing
    Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
    Not keeping a charge. On a daily basis between 7:30am-12:30pm, I go from 100% to 20%. In the store on 3/13, the Verizon rep witnessed my phone go from 81% to 68% in about an hour
    Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
    In the beginning, I would get email notifications and after I would read them, it would appear that they were “marked as read”, however, after I back out of the program, it notifies me of the same emails that I just read, only they’re once again “unread”. Now, I’m not getting ANY notifications of email except in the top drop-down screen, which if I click on it, I can see the emails, but after I back out, they disappear because the program decides not to work.
    GPS is unreliable. It often says that I'm 2+ miles away from where I actually am.
    The phone does what it wants to do when it wants to do it – not when you tell it to! All of our previous phones have given us reliable, clear service. What is wrong with this picture? HELP!!!

    Hi I recently had the same problem with the LG Revolution. In fact it had been one of multiple replacement models that I had received in just a few weeks. The first two devices I had problems with them recycling power, I would make calls and they would make the same call multiple times i.e I would get through to the person I was intending on calling and the phone would call them on like a three way call asking me to merge the conversation I was only having with one other person... The 2nd replacement only lasted a few days. I was playing Words with Friends it gave me a sim error out of nowhere shut down. I checked the card after removing the battery and powered it back up. I was fine for about 10 minutes shut down and I was never able to turn it on again. The next phone they sent I received a few day ltr was the frosting on the cake. As soon as I tried to set it up the problems began. The phone was recycling power so much that it wouldn't fully power up before shutting down. Tech support insisted it had to be the battery, that there was no way they sent me 3 bad phones within 2 1/2 weeks... The new battery was sent over night. So I charged it up and gave it a go. It seemed fine at first, but then started acting up again. I resorted to it wasn't the battery and figured when I got to a land line  or another line I would call Tech support. I was driving the phone was in my right lower scrub pocket apparently because of whatever mechanical defect it had overheated and burned me. I have been kind of at a loss when it comes to the Customer Service Dept. I have reported the incident to them even called to find out who to send my co pay bills too, no response. However they did have the nerve to send me a text asking for the device back or they were going to charge me $500. Now I'm thinking may be if people started taking things like this to the media they would act on it...

  • Lookout OPC Client – Asynchronous I/O and Update Rate serious problems (Sequence of data)

    I am using the Lookout OPCClient driver to connect to AB PLCs (EtherNet/IP protocol) and power measurement equipment (Modbus TCP protocol). The OPC server is the NI OPC Servers. The data that are read out from PLCs and PMs are energy meter readings, energy counters, power, voltage, current, frequency, power factor and el. energy quality measurements (THD). That energy meter readings are being stored in SQL database.
    I am experiencing a serious problem regarding the accuracy of the meter readings. Several times per day, randomly, meter readings are losing the time sequence. For example, sequence is: 167, after few seconds 165, 166.  In other words, present value followed by two previous old values. That generates a serious problem in our application that is expecting a naturally rising sequence of counter values.
    Analyzing further, I isolated the problem to the connection between Lookout OPCClient and OPC Server. I made a simple application in Lookout 6.7 (opcproc.lkp, attached) with OPCClient parameters: NIOPCServers, OPC2, Asynchronus I/O, Update rate: 10000, Deadband: 0.0, that is reading just one tag from NI OPC Servers demo application (simdemo.opf).
    By using OPC diagnostic tool from NI OPC Servers I record the sequence of OPC requests and responses.  I found out that OPCClient sends every 2.5 sec “IOPCAsyncIO2::Refresh2()” call that is request for refreshing of all items in one OPC group. Few milliseconds later OPC Sever responds with callback function “IOPCDataCallback:: OnDataChange()(Device Refresh)” that actually refresh the data.
    This periodic sequence is intrinsic to the OPCClient and cannot be disabled or changed (by my knowledge).  This sequence is periodically interrupted by “IOPCDataCallback:: OnDataChange()” caused by update rate parameter of OPCClient (client is subscribed to server for periodic update of changed items).
    In the case of demo application on every 4 refresh callbacks caused by refresh requests (2.5 sec) there is one update subscription callback determined by Update rate (10 sec).
    QUESTION 1:
    What is the purpose of update sequence and update rate when we have every 2.5 sec fresh values?
    PROBLEM
    The problem arises when we have a large number of items in OPC group. In that case the OPC Server starts to queue refresh requests because they cannot be fulfilled in 2.5 sec time because of large number of I/O points that must be scanned. At the same time update subscription callbacks are running at the period determined by Update rate. I observed in my production system that regular update callbacks has higher priority than refresh callbacks from the queue. That causes the loosing of timed sequence of data. After the update callback with fresh data, sometimes follow one or two refresh callbacks from queue with old (invalid) data. By adjusting Update rate parameter (1 hour, 2hours …) I can postpone the collision of data refreshes but I cannot eliminate it. Furthermore, the 2.5 sec automatic refresh are large burden for systems with many I/O points.
    QUESTION 2:
    Is there a way to disable automatic refresh request every 2.5 sec and just use update requests determined by Update rate?
    QUESTION 3:
    Is there a way (or parameter) to change the period of automatic refresh (2.5 sec)?
    This problem is discovered for Lookout 6.5, 6.6 and 6.7 so I could say it is intrinsic to OPCClient. If I use synchronous I/O requests there is not an automatic refresh, but that is not an option for large systems.
    Thanks!
    Alan Vrana
    System engineer
    SCADA Projekt d.o.o.
    Picmanova 2
    10000 ZAGREB
    CROATIA
    T +385 1 6622230
    F +385 1 6683463
    e-mail [email protected]
    Alan Vrana
    SCADA Projekt d.o.o.
    ZAGREB, Croatia
    Attachments:
    opcproc.zip ‏4 KB

    The physical connection from LV to the switch is (I believe) copper crossover to fiber converter into a switch.  Then, fiber from the switch to the end device (relay).  The relay has all of the typical modbus registries and has been verified by inducing signals in to the system and measured/polled in LabVIEW and observed Variable Monitor.  I am working with LV 8.2 and 8.5. 
    An OPC server would only add an additional translation of addressing within the configuration.  The only real draw back would be the network overhead required to do this processing and not being representative of the end design configuration.
    I will reiterated my question in another way:
    I must answer the question to management that relates to data collection, test results and analysis; how often are you polling the client in relation to the outcomes measured?  At this time I can not point at any configuration in the set up and execution that directs the data framing rate.  I only measure the traffic and work with results.  This needs to be clearly identified based on the relay modbus/tcp design capability of supporting an fixed number of client requests per second. 
    For testing purposes, I would like to be able to stress the system to failure and have prove capabilities with measured data.  The present problem is that I have no basis to establish varying polling rates that effect the measured data transmission. 
    This raises another question.  What handles the Variable Monitor data requests and how is this rate determined?
    Thanks for your interest in my efforts.
    Steve

  • When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

    Hi, I bought an e-book in PDF format that uses Adobe DRM.  I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device). 
    It tries to download the book but get's the following error:
    Error getting License. License Server Communication Problem:
    E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
    Has anyone come across this?  Any guidance would be most appreciated!
    Thanks!
    Tony

    Please refer to the KB article, Public Knowledge Base

Maybe you are looking for