Commands under "menu'

Hi
I add 4 commands to my canvas: Exit, Command1, Command2, Command3.
It shows on the cellular Menu, Command1 and Exit. Under Menu I have Command2 and Command3.
I want that only Menu and Exit will be on cellular screen and all Command1-3 will be under Menu. How can I do it?
Thanks.

Many(all?) Nokia phones will put your commands under 'Options' if you use generic Midp1.0 code, regardless of the priorities and types of the Command's.
The way around this is to use the Nokia specific libraries for full-screen and draw your own command labels. This way you can control exactly what is visible. What you do is include nokiaui.zip (find on nokia developer site somewhere) in your build path, and extend the FullCanvas class instead of using a normal Canvas. This will get you full-screen on even Midp1.0 Nokia devices.
The FullCanvas class has constants KEY_SOFTKEY1, and KEY_SOFTKEY2 that represent the Canvas.getGameAction(int keyCode) of the left and right soft-key's, so you can tell which corner key was pressed.
I hope this helps, I remember going through this problem when I released my first game a couple years back, and the distributor told me that the commands were stacking under 'Options' for nokia's.

Similar Messages

  • Black frame around icons when highlighted - double commands under the apple

    when anything highlighted with a mouse click a black frame appears - also there are double commands under the apple menu - example
    shut down
    shut down
    restart
    restart
    I did every trick I could think of - safe, single user, open firmware reset-all, account cache, disc utility, - only one account is effected, other accounts are ok - Monday was first time, I was 1 hour away form rebuilding account when the problem went away, on its own - this morning its back on a different machine, again just one account - G5 running 10.4.8 - any ideas?

    Turn off
    SystemPreferences>UniversalAccess>Seeing>VoiceOver
    While you're at it, go to the Keyboard&Mouse preferences>KeyboardShortcuts and uncheck the VoiceOver shortcut (Cmd-F5)

  • Window on mac is stuck under menu bar

    window on mac is stuck under menu bar

    In case this happens to anyone else (and searching the web, it seems fairly common), the application that was having this problem for me was iTunes.  Stuck under the menu bar, no way to move it.  I could get it to go full screen, but going back to a window put it in the same stuck position. Quitting and restarting the application didn't help.
    Finally found a solution that worked for me (2013 MacBook Air, Mavericks);  I usually have an external monitor plugged in when I'm at home, which enabled the following:
    I right-clicked the iTunes icon in the Dock, went to "Options" in the popup menu, and selected "Assign to Desktop on Display 2" (which is my Air's built-in screen).  I then started the application, and it opened in the middle of the Air screen.  After that I could move it anywhere (and I reassigned it to "All Desktops" from Options).
    Hope this helps someone...

  • Why don't I see the option Generate under menu item File in Photoshop CC?

    Hi,
    Why don't I see the option >Generate under menu item >File in Photoshop CC?
    I want to be able to generate a edge reflow project.
    /Thors

    Please confirm if you are updated to the latest version of Photoshop CC. Go to Photoshop>About Photoshop on Mac, For Win, go to Help>About Photoshop.
    We recently released a new update. Here is teh link for more info:http://forums.adobe.com/message/5674936#5674936
    Regards
    Pragya

  • Customize option is missing under menu button. It is missing under View Toolbars as well. Please help!

    Customize option is missing under menu button. It is missing under View > Toolbars as well. Please help!

    Screenshot:

  • No dialer command under ISDN BRI interface

    Hi all,
    I have a 2901 router voice bundle with 4 ISDN BRI ports and would like to have them bundled under Dialer1 interface. Unfortunately it doesn't give me option for Dialer command under BRI interface as expected. 
    router(config-if)#int bri0/0/0
    router(config-if)#dia
    router(config-if)#dia
                             ^
    % Invalid input detected at '^' marker.
    router(config-if)#dialer
                             ^
    % Invalid input detected at '^' marker.
    router(config-if)#
    I assume it's down to the UC license installed on the device but not sure. Does the ISDN BRI interface behave in different way under this license?
    Pasting portion of "show ver" as well.
    Cisco CISCO2901/K9 (revision 1.0) with 479232K/45056K bytes of memory.
    Processor board ID 
    2 Gigabit Ethernet interfaces
    4 ISDN Basic Rate interfaces
    1 terminal line
    DRAM configuration is 64 bits wide with parity enabled.
    255K bytes of non-volatile configuration memory.
    250880K bytes of ATA System CompactFlash 0 (Read/Write)
    License Info:
    License UDI:
    Device#   PID                   SN
    *0        CISCO2901/K9          
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package           Technology-package
                  Current       Type           Next reboot
    ipbase        ipbasek9      Permanent      ipbasek9
    security      None          None           None
    uc            uck9          Permanent      uck9
    data          None          None           None
    Configuration register is 0x2102

    Hi,
              Snippet of "sh ver" with IOS version is below:
    router#show ver
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Fri 13-Sep-13 14:59 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
    router uptime is 2 days, 21 hours, 47 minutes
    System returned to ROM by reload at 16:48:03 UTC Mon Aug 18 2014
    System restarted at 16:50:01 UTC Mon Aug 18 2014
    System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M5.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    The output of trying to type dialer command is in the initial post, I'm also pasting all available commands under bri0/0/0.
    router(config-if)#int bri0/0/0
    router(config-if)#?
    Interface configuration commands:
      aaa                     Authentication, Authorization and Accounting.
      access-expression       Build a bridge boolean access expression
      arp                     Set arp type (arpa, probe, snap), timeout, log
                              options or packet priority
      authentication          Auth Manager Interface Configuration Commands
      autodetect              Autodetect Encapsulations on Serial interface
      bandwidth               Set bandwidth informational parameter
      bgp-policy              Apply policy propagated by bgp community string
      bridge-group            Transparent bridging interface parameters
      carrier-delay           Specify delay for interface transitions
      cdp                     CDP interface subcommands
      clns                    CLNS interface subcommands
      clock                   Configure serial interface clock
      cwmp                    Configure CPE WAN Management Protocol(CWMP) on this
                              interface
      dampening               Enable event dampening
      default                 Set a command to its defaults
      delay                   Specify interface throughput delay
      description             Interface specific description
      dot1q                   dot1q interface configuration commands
      dot1x                   Interface Config Commands for IEEE 802.1X
      down-when-looped        Force looped serial interface down
      encapsulation           Set encapsulation type for an interface
      ethernet                Ethernet interface parameters
      exit                    Exit from interface configuration mode
      flow-sampler            Attach flow sampler to the interface
      full-duplex             Configure full-duplex operational mode
      h323-gateway            Configure H323 Gateway
      half-duplex             Configure half-duplex and related commands
      help                    Description of the interactive help system
      history                 Interface history histograms - 60 second, 60 minute
                              and 72 hour
      hold-queue              Set hold queue depth
      ip                      Interface Internet Protocol config commands
      iphc-profile            Configure IPHC profile
      ipv6                    IPv6 interface subcommands
      isdn                    ISDN Interface configuration commands
      isis                    IS-IS commands
      iso-igrp                ISO-IGRP interface subcommands
      keepalive               Enable keepalive
      line-power              Provide power on the line.
      llc2                    LLC2 Interface Subcommands
      load-interval           Specify interval for load calculation for an
                              interface
      logging                 Configure logging for interface
      loopback                Configure internal loopback on an interface
      mab                     MAC Authentication Bypass Interface Config Commands
      mac-address             Manually set interface MAC address
      macro                   Command macro
      metadata                Metadata Application
      mop                     DEC MOP server commands
      mtu                     Set the interface Maximum Transmission Unit (MTU)
      netbios                 Use a defined NETBIOS access list or enable
                              name-caching
      network-clock-priority  Configure clock source priority
      no                      Negate a command or set its defaults
      ntp                     Configure NTP
      ospfv3                  OSPFv3 interface commands
      pulse-time              Force DTR low during resets
      rate-limit              Rate Limit
      redundancy              RG redundancy interface config
      routing                 Per-interface routing configuration
      sdllc                   Configure SDLC to LLC2 translation
      serial                  serial interface commands
      service-policy          Configure CPL Service Policy
      shutdown                Shutdown the selected interface
      smds                    Modify SMDS parameters
      snapshot                Configure snapshot support on the interface
      snmp                    Modify SNMP interface parameters
      source                  Get config from another source
      tarp                    TARP interface subcommands
      timeout                 Define timeout values for this interface
      topology                Configure routing topology on the interface
      transmit-interface      Assign a transmit interface to a receive-only
                              interface
      trunk-group             Configure interface to be in a trunk group
      tx-ring-limit           Configure PA level transmit ring limit
      vpdn                    Virtual Private Dialup Network
      vrf                     VPN Routing/Forwarding parameters on the interface
      waas                    WAN Optimization
    router(config-if)#

  • Missing setipmm command under listenerconfig

    Team,
    I have been trying to test the mail merge feature on test environment and somehow I can not find a way to execute setipmm command on CLI. As per the user guide 8-5-6, Use the setipmm subcommand of listerconfig to enable the IPMM on the listener.
    When I execute listerconfig command I see 4 options 1) NEW 2) EDIT 3) SETUP 4) DELETE and cli won't allow to execute setipmm command under any sub options. Any clue as to what am I missing? 
    Thanks,
    SJ

    10.6.8
    CS6
    Essential or Advanced
    I ended up uninstalling, restarting, reinstalling from the cloud.
    I was missing the plugins.
    I think I've resolved the issue.

  • How to remove transaction that was added under Menu - Role Menu

    We have roles that we need to remove some transactions.
    These transactions were added under Menu - Role Menu and expanded for ex: Logistics and Picked Miro transaction.
    When I go to PFCD and check under s_tcode I cannot remove Miro transactions since it's grayed out.
    The only way to remove this is to go back to the Menu and do a find on miro and work through the menu until I get to Miro transaction and then delete it.
    Is there another way to accomplish this.
    Thanks
    Joe

    This is the intended way a role built from a menu works. What might be the use of an authorization without any corresponding transaction to start it? It is only a risk...
    Unless of course you know better or design differently and don't make the effort to adjust SU24, then you can insert manually or cause "changed" authorizations, but PFCG will not look at it from a "your own fault" view and not adjust it or protect it against illogical changes.
    To use the discipline of the one approach but keep the flexibility of manual authorizations is not possible for S_TCODE, S_RFC and S_SERVICE objects (the entry points).
    Cheers,
    Julius
    PS:
    > Total Questions:  42 (36 unresolved) 
    Please follow-up on your unresolved questions. There is a limit now of 10 open questions asked since July 2008.

  • Weird open command stuck under menu bar for just one specific file

    I'm having a weird problem where a little arrow in a small grey box sits under the menu bar, no matter which program is active. If I roll over it, an icon for a quicktime file shows. Clicking it open a specific file. It's one I had dragged to the desktop from the trash. If I click the icon, it opens the file from the trash. If I delete the trash, the little grey box and arrow stays there, pointing to the file in the trash even though it doesn't exist anymore. I cannot get rid of it!
    Here are some screenshots since this is hard to explain.
    MacBook   Mac OS X (10.4.9)  

    Hi Jerymander , Welcome to Apple Discussions,
    Have you tried starting in "Safe Mode"?
    Let us know.
    -mj
    [email protected]

  • Application stuck under menu toolbar

    An application I'm running (Filezilla FTP client) is stuck under the mac menu toolbar. I can't grab the toolbar of the application to move it or access what I need to access. I've researched this issue and other people have had the same problem, but none of their solutions have worked for me. I've tried changing the resolution of my screen, disconnecting my dual monitor, "zoom" is not available in the program I'm working with, and I've tried a multitude of expose/spaces/random key commands to no avail. Any other ideas?
    Using 10.9.5

    I can't see from your screenshot if there available screen space around the window. You could try dragging the window down from one of the bottom edge - making it smaller first if necessary (when the cursor is near the edge it has double arrow that indicates changing the window size), then make sure that your mouse is enough inside the window that the cursor is a normal one-arrow and drag it down. Repeat if necessary until the title bar reappears.

  • App stuck under Menu Bar after Unlock

    Random application's Title bars are getting stuck under the Menu Bar at the top left of the screen after I unlock my Air.  Attempts to drag the window to a different location results in them snapping back to the original position.  The only fix is to close the application and restart.
    Anyone else seeing this?  Could this be an Accessibility option that's on that shouldn't be?

    I ended up re installing Mavericks after the last update (10.9.1) from a bootble USB stick. The problem appears to have gone away, so maybe my original upgrade of Mavericks caused the problem???
    I downloaded Mavericks again from the app store. When it had finished downloading (approx 5Gb) I exited the installer and created a bootable USB (needs to be 8GB minimum). Then booted from USB and ran the Mavericks installer. As I said problem seems to have disappeared......
    I used this article http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html and used the method in Option 1 in the article to create the drive. A Synopsis of the steps are:
    Format the USB using Disk Utility to Mac OS Extended with GUID partition.
    Open Terminal and paste the following command press Return and enter admin password when prompted
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    It takes a while to create and copy the installer. (Could be up to 30 mins)
    Finally reboot and hold down Option key while computer boots then select the USB drive.

  • On screen Keyboard stuck under menu bar

    On one of my GB songs when I select window> Keyboard, to get the onscreen keyboard to show, half of it is running off the top of my screen under the menu bar. I cannot click and drag it down so I can use it. It allows me to stretch it to the right but I cant click on a part of it that allows me to move it/re-position it on screen. The position it is in now will not allow me to use it.
    Help Please.
    Paul

    Hey thanks a lot! It was very nice of you. I have noticed that you help a lot of people with GB in these forums. Every time I search these forums I see your name helping out someone. You should be commended:)
    Back to the topic at hand, After reading your post I tried something and it worked. What was happening is when I recorded or worked on something on my 17" MacBook Pro and then brought it over to my G5 with regular (non widescreen format) dual displays it was forcing the keyboard off the screen. So I tried opening the file on the MBP and moved the keyboard way down to the bottom, saved, moved the file to the G5, and when I opened it the keyboard was in the middle. Problem solved.
    You learn something new everyday. And I am sure this will happen to someone else and hopefully they will search these forums and find this post for a solution.
    Thanks Again,
    Paul

  • Cannot find any of the links under menu

    Hi guys,
    I made a installation of PT8.51 on Oracle11gR2 on Win2k8R2 64-bit.All scripts ran successfully.Everything went fine.Iam using 2 machines i.e. one as an application server and other as an database server.I configured the application server and booted it.I configured the PIA and i logged into it but to my surprise i cannot find any of the links or anything under the menu.Why is it.Do i have to run any scripts to grant the user PS some permission to access the menu or what??Pls help me.Do i have to make any further configuration on any of the servers?

    Thank you for your reply.No nic i have not managed for an upgrade.Is there any other way to check that i have got everything in my PIA.I doubt it may be something like the PS user is not granted the security to access any of the links.PLs advise what to do?

  • Java windows slip under menu bar, how to move?

    Hi, I have accidently dragged some Java windows beneath the (transparent) menu bar.
    Safari browser windows do not slip under the menu bar, but those created by a Java application can slide beneath it, up to the edge of the screen...just far enough to make accessing their title bars impossible. I'm able to resize the Java windows by dragging their accessible edges but I am unable to click on their title bars in order to drag them back down beneath the menu bar.
    How can I click upon title bars or resize these windows to lower them in desktop space, so their title bars are lower than the menu bar? I am currently unable to drag or click upon their obscured title bars to move these windows. Is there another way to move windows without clicking upon their title bars?
    thanks

    apparently there is a third party app called windowsmover or something like that
    do a google search for "windows mac os move shortcut keyboard"
    to answer my own post

  • Windows slide under Menu Bar

    I've noticed recently that I can make application windows slide under the Menu Bar.  Some slide under then 'snap' back into view when I release the mouse button holding the window down.  Others that don't display the grey bar at the top of the window (like the iTunes mini player for example) don't 'snap' back into view.
    Anyone else have this issue or offer a solution?  I am running 10.8.5.  Thanks.

    Render at least standard sized previews for all photos prior to displaying in the slideshow.

Maybe you are looking for