Commitment registered wrongly
Hi Experts,
This problem occurs in a service purchase order with Multiple Account Assignment and the S.-Based IV is marked.
Commitment is registered wrongly because the system registers double Adjustment by Follow-on document.
Could you help me please.
Thanks in advance.
I attached an image:
http://subefotos.com/ver/?b3f6ec9a9d33de10de998357f3cd3e0bo.jpg[url]
José Luis
Hi,check note 1455122 and 152571
Similar Messages
-
AppWorld Email address registered WRONG
Hello All,
First time! And I know I'd sound like a complete **bleep**!
The email address I registered in Appworld for my BB Playbook, unfortunately, was mistyped and incorrect. It was fine until i forgot the password and now could not login. I was trying to use another AppWorld login (the one I use for my BB Pearl) unfortunately (again ), the Playbook doesnt allow changes in the registered email address somehow ( or am just really a total **bleep**! ).
I have already gone through a lot of verification and all, which ends up sending a new password to the email I registered, which i cannot access because I did it wrong.
Would appreciate an assistance, please.
thank you!
JenYour choices are:
--Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
--Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I got PNY 8GB RAM and it said it was 1067 MHz. When I installed it it registered in my MBP as 1333 MHz. The package says its compatible with 1067 MHz and 1333 MHz systems. Will this damage my MBP? I'm wondering if I should send it back and try another brand.
It's working. Just noticed it registering the different MHz under the About This Mac tab.
-
Wrong A/P invoice and effect of Credit memo
If we registered wrong AP invoice there is no way unless issue credit memo. And this process cause other wrong record in system. In SAP Business One there is no option to cancel an invoice but with Credit Memo. This is the only way and it has to be this way because of the law, in Venezuela every invoice that is cancelled has to have a credit memo to support it. First of all I would like to bring your attention to this point that it is we are talking about the correction of the figure just in financial side ( no impact in inventory) which it may cause because of user mistake when he /she register AP invoice with putting wrong amount at that time. Based on your solution : With debit memo not only the amount in financial side will be corrected but also the quantity of the warehouse will be changed which it is not our case.
In summary we need to correct the amount of invoice JUST in financial module with no impact in inventory?
Thanks in advanceAs you know there is only one way to cancel AP invoice , and it cause decreasing in inventory, so how can I register again AP invoice becasue related Good recipt was closed by AP invoice , and I can not issue AP base on that good receipt.
-
Cancelling Marketing Documents
There is a feature not present in SAP Business One that would help to get a better fit of SBO at our customers: The ability of cancel some marketing documents, such as Invoice, Delivery, Returns, and other marketing documents that do not have this feature.
Sometimes, users do make mistakes. And, in order to correct thos mistakes, they need to create a "reverse" mkt doc to cancel the document created in a worng way. The problem with this approach is that those documents (create with the purpose of cancel another mkt document) mix with the same mkt documents create in a regular way (i.e. "real" documents).
By creating the "cancelling" feature, SBO can produce journal entries in order to annul mistake maded by user (preserving the architecture of SBO in this matter), but setting the status of document as "cancelled".Dear Vincent Motte,
We are located in Brazil. Here, the Invoice is a legal document, and it can be issued by the company not only in invoices, but also in returns (in some cases where company is performing return does not have the legal obligation to issue an invoice in such cases. In those cases, our customer must issue an invoice in order to get goods entries legally).
It is perfectly resonable that user make mistakes. When those errors take place in issuing an invoice, because of the "legal" sense of it, this become more sensible. Usually, users need to "register" wrong invoices, legally speaking.
By creating a credit memo to annul an invoice (or vice-versa), those kind of operations stay in the same way "real" operations are, creating a fake sense operation was a real one.
It would be much more practical to have a simple cancellation process in invoices, deliveries, credit memos, an so on. In that way, we can register errors without the need of correct the problem by issuing another legal document. -
Extending controller HzPuiAddressCreateUpdateCO to validate Supplier addres
Hi,
I need to validate city, state,zip for a supplier in the page 'Update Address'. so i am extending the controller 'HzPuiAddressCreateUpdateCO', The validations and everything is working fine. when i click the 'Apply' button, i am getting the error message saying that the zip size is not correct,this validation is from my extended controller, so i cancel and go back to the previous page. but when i check database after i cancel, the page is commiting wrong data, so basically the issue is, when there is an error exception, i am seeing the error message, but its commiting the wrong data to DB. i am not able to understand what the issue is.
Here is the CO extension i wrote
public class xxxtest extends HzPuiAddressCreateUpdateCO
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
super.processRequest(paramOAPageContext, paramOAWebBean);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
localObject1 = paramOAPageContext.getApplicationModule(paramOAWebBean);
HashMap localHashMap = new HashMap();
if(paramOAPageContext.getParameter("applyBtn") != null)
OAApplicationModule xam = paramOAPageContext.getApplicationModule(paramOAWebBean);
OAViewObjectImpl LocationVO = (OAViewObjectImpl)xam.findViewObject("HzPuiLocationVO");
OAViewRowImpl CurrRow = (OAViewRowImpl)LocationVO.getCurrentRow();
String saddressval = "BEGIN :1 := APPS.xxxx.xxx(p_etst=> :2, p_state => :3, p_city => :4, p_zip => :5, p_country => :6, p_party_site_id => :7); END;";
OracleCallableStatement cstmt = null;
String saddressvalrslt = null;
try
cstmt = (OracleCallableStatement)xam.getOADBTransaction().createCallableStatement(saddressval, 1);
cstmt.setString(2, " ");
cstmt.setString(3, (CurrRow.getAttribute("State") == null ? " " : CurrRow.getAttribute("State").toString()));
cstmt.setString(4, (CurrRow.getAttribute("City") == null ? " " : CurrRow.getAttribute("City").toString()));
cstmt.setString(5, (CurrRow.getAttribute("PostalCode") == null ? " " : CurrRow.getAttribute("PostalCode").toString()));
cstmt.setString(6, (CurrRow.getAttribute("Country") == null ? " " : CurrRow.getAttribute("Country").toString()));
cstmt.setString(7, paramOAPageContext.getParameter("PosPartySiteId").toString());
cstmt.registerOutParameter(1, OracleTypes.CHAR);
cstmt.execute();
saddressvalrslt = cstmt.getString(1);
catch (Exception e)
throw OAException.wrapperException(e);
if(saddressvalrslt != null)
throw new OAException(saddressvalrslt,OAException.ERROR );
if (paramOAPageContext.getParameter("cancelBtn") != null)
//paramOAPageContext.getApplicationModule(paramOAWebBean).getTransaction().rollback();
//localObject1 = new HashMap();
//paramOAPageContext.setForwardURL("POS_HT_SP_B_ADDR_BK", 0, null, (HashMap)localObject1, false, "Y", 0);
//paramOAPageContext.setForwardURL("POS_HT_SP_B_ADDR_BK",OAWebBeanConstants.KEEP_MENU_CONTEXT, null, (HashMap)localObject1, false,OAWebBeanConstants.ADD_BREAD_CRUMB_YES, OAException.ERROR);
super.processFormRequest(paramOAPageContext, paramOAWebBean);
any help is really appreciated.
Thanks,
KiranM.hi KiranM
see
1.) when u click on apply button it throws error but but values are not saved in database .
2.) Now when u click on cancel the PFR method is called again since your validation fires on apply button that is not clicked ,it goes inside the cancel button and ( if code is commented means nothing is there ,and come out
3.) now it calls super method which is responsible to save the values in database.
i m not sure this is happening exactly ,u need to check with parent controller also ,decompile and check what is going on there on the event of these buttons
thanx
Pratap -
COMMIT needed for invoker rights proc?
The following proc EXEC_PROC in a package named PKG_DYNAMIC_SQL is called by the proc RUN_PROCS which is in a different package shown below:
PROCEDURE exec_proc (pi_proc_name IN varchar2 ,pi_acctky IN varchar2 )
AS
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
EXECUTE IMMEDIATE 'BEGIN ' || pi_proc_name || '(:acctky );' || ' END;' USING IN pi_acctky ;
END exec_proc;
PROCEDURE run_procs(pi_proc_names_tab IN pkg_types.t_tab_proc_names)
IS
BEGIN
FOR indx IN pi_proc_names_tab.FIRST .. pi_proc_names_tab.LAST
LOOP
pkg_dynamic_sql.EXEC_PROC ( pi_proc_names_tab(indx) ,pi_acctky) ;
END LOOP;
END run_procs;
The pi_proc_name is a set of stand alone procs that do an UPDATE statement. I find that unless I have a COMMIT statement inside each pi_proc_name I get a RUN TIME ERROR. Am I right in saying that cause I have a BEGIN END ( Anonymous block) pair round the invocation of pi_proc_name I am using INVOKER RIGHTS? Has that something to do with the error when the called proc does not commit before it exits?
Please help me understand why?does the called proc inherit the AUTONOMOUS TRANSACTION from the caller as in my example?No.
Actually, I'm not sure what you mean:
RUN_PROCS is calling EXEC_PROC (the autonomous transaction).
So: RUN_PROCS is the caller, not EXEC_PROC.
And I would only use autonomous transactions for error logging purposes. Nothing else.
If I understand correctly you're executing several procedures dynamically and each procedure gets committed as a separate transaction, (since they're all autonomous, they cannot 'see' each other anymore, all transactional logic is gone) all in one loop. That's a classic recipe for disaster when unexpected things happen, and they will happen sooner or later.
Are you sure it is safe to execute procedure 'Y' when procedure 'X' went into an error/committed 'the wrong' data/?
In other words: I hope this whole approach a well thought-out strategy, but usually dynamic (PL/)SQL + autonomous transactions = trouble/breaking code/corrupting data. -
I registered the the wrong information for my iCloud account--I misspelled the account name. I accidentally spelled blackberry instead of blackbird. How can I change this?
If you don't want to use an alias you'll have to create a new account as you cannot change the @icloud.com address once created. You'll have to create a new ID, verify the ID, then use the ID to create the new account, and migrate your iCloud data to the new account.
If you are currently syncing data with iCloud, begin by saving any photo stream photos to your camera roll as mentioned above. If you are syncing Notes with iCloud, you'll also need to open each of them and email them to yourself so they can be recreated in the new account. Finally, if you are syncing any iWork documents with iCloud, turn off iCloud syncing in your iWork app settings.
Then go to Settings>iCloud, tap Delete Account, and choose Keep on My iPhone when prompted. Then in Settings>iCloud tap Get a Free Apple ID at the bottom, set up your new ID, verify the email address you use to create it by responding to Apple's verification email, then sign in with the new ID to create your new account. Turn on your iCloud sync settings and choose Merge when prompted to upload your data to the new account. When you turn Mail to On you will be prompted to create your new @icloud.com email address. Be carefull to type it correctly as it cannot later be changed. -
GR/IR Account with Wrong Commitment Item
Dear Experts,
When we doing GR(MIGO), system is not deriving the commitment item from FMDerive, istead taking the commitment item from offsetting GL entry. Is it common behavior? If not, how to force GR act derived into right commitment item which its category (40/3). Please kindly advise. Thank you.Hi kkbdsp,
My issue is this GR account is never derived from FMDerive. And i searched in forum, this is common behavior in SAP like Ming Hong post below :
" What you described is a SAP standard behavior. For GR/IR account, system ignores whatever settings you made in FMDERIVE. FM account assignment is inherited from the PO. For example your consumption PO has expense account 456 with CI 456, Fund and FC; your GR/IR account is 123 with CI 123.
GR posting:
DR 456 with CI 456/Fund/FC
CR 123 with CI 456/Fund/FC
IR posting:
DR 123 with CI 456/Fund/FC
CR Vendor
Regards,
Ming
And my concern are :
- I am just wondering why do we need to make CI setting for GR/IR with category 40/30?
- if GR act is always derived from its offseting acct (expense acct 30/3), why then SAP give error message "GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct"?
Please kindly advise. Thanks. -
Wrongly captured in our cenvat invoice and RG-23D Register
Hi Users,
I am facing a problem in CIN- where Excise details are wrongly captured in our cenvat invoice and RG-23D Register can anyone guide me the possibilities of errors, ASAP Please............
Tahnks & Regards
SivaI have already done that. Paking indicator has also been maintained in the J_1IRG1 as well. I have executed the note as well. Its not that the values are not flowing. It is
for instance
Opening Balance Quantity Manufactured TOTAL REMOVALS
Quantity Value
0 100 0 0 0
0 100 0 0 0
0 100 0 0 0
0 0 0 10 0
0 0 0 10 0
If you see above the opening balance in the second line item should be 100 and third should be 200...
Also the removals qty are reflected ut not value. Pls explain. The problem kin the closing balances is of the same type.
regds
Jude
Edited by: jude xavier on Jun 4, 2008 2:51 PM
Edited by: jude xavier on Jun 4, 2008 2:56 PM -
How can I link iTunes Match to my proper Apple ID? I have two ID's and my phone accesses iCloud with the proper ID but it insists on trying to access iTunes Match using the wrong ID so I get the message that I'm not registered for iTunes Match.
The iCloud and iTunes Store account ID are not the same thing. They can be different although some folks, like myself, do have the same Apple ID for all the Apple services. Go to Settings > Store and enter the exact same iTunes Store account ID you used to purchase iTunes Match. Be aware you can only switch Apple IDs on an iOS device every 90 days.
-
I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57
Apple Contact USA
http://www.apple.com/contact/ -
I wrongly entered my apple id into my new i phone . It was my e mail address with a letter wrong
I have registered correctly on the i cloud account but when I go to get apps it still shows wrong e mail
How do I delete this incorrect e mail? Thanks Mikesettings - app/itunes store - sign out - sign back in.
-
to cut a long story short. I was interested in an i-phone... got the details..checked them all.. on the phone and with the provider, VODAPHONE... told unlocked, not stolen etc etc. proceeded to buy the phone...new sim topped up £10 only to find it wouldn't work...
Went into vodaphone store..been running around following thier advice..(they said I need a friend who is a customer on vodaphone to get passed the unlocking with a vodaphone code.. and they would do it for free given the circumstances...so i run errands go back and forth doing as they asked...got nowhere) SO IT IS NOW A MONTH LATER..and after complaining and complaining to thier email site and repeatedly asking for help in store..I am stumped as what to do and just have a glorified ipod. I WILL NOT BE FORCED TO REMAIN ON THE VODAPHONE NETWORK given the situation they have put me in and thier unwillingness to help so i refuse to use the phone with vodaphone... BUT WHAT can i do PLEASEEEEEEE? all they keep on suggesting is that I get the original owners details but he is not answering anything...and the phone is not registered as stolen etc so what is the problem!?
As you can imagine I am really peeved by the whole thing as I actually carried out all the necessary checks, and whilst the phone was not bought directly from vodaphone, I went to them as the provider, to find otu about unlocking etc as it is always advised to do so..and it was them that gave me the wrong information but they still will not resolve the issue. I have even sent them phone records to confirm when I rung and the name of the invalid who told me the phone was unlocked in the first place. I really would much appreciate any help as they are ignoring my emails now.What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work -
Commitment item updated wrongly
Hi friends
I have a doubt in funds management budget control suystem
at the time of creating PO - No problem (FM account assignment is providing me correct commitment item and Fundscenter)
Below is the scenario
I have assigned commitment item - "INV" for the inventory FI-GL account and it is populated in PO - correctly
when i do the GRN i get
Inventory account Debited with commitement item "INV" (correctly)
GR/IR account credited with commitemnt item "INV" (wrongly)
for the GR/IR line item I want commitment "GR/IR" to get populated instead of commitment tem "INV"
In the GR/IR GL account I have assigned commitment item "GR/IR"
if so why am I getting commitment item "INV" instead of commitment item "GR/IR"
where is the problem please please can you help me by answering this
P.S
the commitment item "INV" is with 30/3 Combination
the commitment item "GR/IR" is with 40/3 combination
Thank you & Kindest Regards
SrikaanthHi, before posting use search, this question discussed.
\You can't substitute CI for GR/IR account during GR, it populate from Dr account(from PO)
Maybe you are looking for
-
How to disable webview cache for Windows Phone 8.1 Runtime universal app?
Is it possible to disable cache for the Webview control for a Windows Phone 8.1 runtime universal app? My App seems to be remembering the information it received the first time. My app logs me into a service and when I go back to rerun app in the emu
-
I think its a plug in or something, since the site is foreign. I have some screenshots i'd like to upload.
-
Sending attachments with emails in Javamail
I'm trying to send attachments with emails using Javamail. Following is the code through which I'm trying to achieve that. It works as expected on a JRE1.6 environment. But on JRE1.5, the content of the file gets added to the mail body as text.I want
-
I seem to have a complete crossdomain.xml that should work fine. However, I am in a situation that hopefully can be fixed. Here at the U we share the www2.med.umich.edu with other departments. Our IT department is throwing a fit about putting the cro
-
G/L account no assigned cheque numbers in Document Overview screen (FB03)
Hi there, I currently have an issue wherein cheque numbers are not assigned on the document overview - display screen. Payment run and Cheque run have been initiated. Checking on SAP table PAYR-CHECT, cheque number is assigned to the relevant doc n