Communication Channel Monitor status using UDF

I am writing a UDF to get the JMS adapter type status from "communication channel monitor"..
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dkey = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/JMS", "DCJMSCorreleationID" );
From here I don't how to get the status of JMS communication channel status, cluster node status and also the processing details..
I am also thinking, is there any I can get the JMS payload and parse it to get the required elements..
I badly need ur suggestion..
Thanks-GS

Hello Sreeram ,
Thanks for the Reply.I am working on PI 7.0 SP06 in a SAP Note I have read that
it is from PI 7.0 SP8 i think because of the lower SP level iam not getting the
Communication Channel Monitor displayed.
Note 1000528 - FAQ: XI 3.0 / PI 7.0 Adapter and Channel Monitoring
Regards
Prasad
Message was edited by:
prasad chintala

Similar Messages

Process not visible in the Communication Channel Monitor

Hi there
I have a scenario where I create multiple text files with my message mapping. First I created the scenario with a single file and tested it. It worked so then I changed the Interface Determination to Enhanced and the necessary occurrences to unbounded in my IM and MM. Now if I execute the scenario it shows a successful status in the SXMB_MONI but does not create the flat file. If I go to my Communication Channel Monitor it does not show it there so it did not reach it. Is there some other ting I needed to change for this multiple file scenario?
Thanks,
Jan

Hi again
I sorted out the issue but now I'm getting something weird. In my source Message Mapping I have:
Destination
--Name (0-Unbounded)
Payload
--Details (0-Unbounded)
And my Target mapping I have
Main_Structure (0-Unbounded)
--FileDetails (0-1)
So the Destination determines the number of files and the payload goes to the File Details.
This does not work for some reason but if I change my mapping to a fixed number of files it works. For example: If I create a UDF that creates 2 arrays and map it to my Main_Structure it creates 2 files but it I map my Destination node with X amount of lines to my Main_Structure It shows fine in SXMB but does not show at all in the component monitor for the receiver CC and in my message monitor it shows "On Hold"

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

XI - Communication Channel Monitor

Hi,
I have this 'interesting' situation where although I can view my Sender Comm. Channels with the Communication Channel Monitor, I'm unable to view my Receiver Communication Channels - no matter the Adapter Type. As a result, when I test my scenario I get an HTTP_RESP_CODE_NOT_OK 404 error message.
Has anyone come across this situation before, and how did you resolve it? I have tried deleting and then re-creating the Receiver Comm. Channel, but still can't see it.
Thanks in advance.
Regards,
Reuben.

HI,
if 404 error then see below
5) Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards
Chilla..

XI communication channel missing in communication channel monitoring

Hello partners,
I have a problem with communication channel monitoring.
I have defined a communication channel of Adapter Type = "XI" in the integration directory.
I have also sent messages successfully via this communication channel.
But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
Can someone tell me how I can get monitoring info of an "XI" communication channel?

Hi,
From SP17, you have a new feature
http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
<i>The Runtime Workbench has the following new functions:
● Component monitoring: Communication channel monitor
In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
Regards,
Bhavesh

Communication Channel Monitoring Error

Hi...Experts,
we r doing RFC-SOAP scenario with out using WSDL file,
sender Communication Channel Monitoring getting error like this
Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
In the Receiver Communication Channel Monitoring, getting error like this.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden.
how can i rectify these errors, pls suggest me..
regards,
Pasi.

Hello Pasi,
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
Because of Inactive Services in ICF Go to SICF transaction and activate the services. Refer SAP Note -517484
Error in RWB/Message Monitoring- because of J2EE roles Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. Because of the URL is incorrect or the adapter is not correctly deployed.
Go through Micheal's Blog..
XI: Timeouts
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Thanks,
Satya Kumar

Page cannot be displayed error in Communication channel monitoring

Hi,
when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
I am testing this for the for the first time in QA environment.
But in development , CC monitoring works fine in the same Laptop.
I have checked the hosts file and it has the IP address and system name present in it.
i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
we are using PI 7.0, windows XP and IE 7.0.
Could anyone help to solve this problem?
Thanks
JJ

I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
instead of the FQDN you can also open the page using the IP address of the server.
I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
This may be because you did not mark the thread as a question
Regards,
Abhishek.

Sender Communication Channel Monitoring Error

Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AM

Hi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful

Activating Communication Channel Monitor in PI 7.0

Hello all,
Can anyone tell me Detail steps involved in <b>Activating Communication Channel Monitor</b> I have tried assigning my User with following roles
A user needs the following role to query the status of communication channels:
●      xi_af_channel_admin_display
A user needs the following role to start or stop communication channels:
●      xi_af_channel_admin_modify
Is it correct ?
What are steps ?
regards
Prasad

Hello Sreeram ,
Thanks for the Reply.I am working on PI 7.0 SP06 in a SAP Note I have read that
it is from PI 7.0 SP8 i think because of the lower SP level iam not getting the
Communication Channel Monitor displayed.
Note 1000528 - FAQ: XI 3.0 / PI 7.0 Adapter and Channel Monitoring
Regards
Prasad
Message was edited by:
        prasad chintala

Capturing the communication channel monitoring error into an alert.

Hi,
The following is my scenario:
File adapter polls using file content conversion,if the source file is not in a proper format the file wont be picked up and communication channel will show error in channel monitoring.
I have to configure an alert for the same.
Can i capture the error message shown in communication channel monitoring and raise alert?
Many Thanks,
Pritish

refer todays thread on the same issue;
FILE ADAPTER ISSUE

Communication Channel Monitoring not showing up Communication Channels

Hi All,
PI 7.1 : I have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
And in ID I am getting below warning message for that Communication Channel.
Message: Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in SLD.
Any idea? I appreciate your quick help.
Thanks,
Carl

Hi Abhishek,
I have selected inID , File dapater software component SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
Thanks,
Carl

Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 ) and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld
   host name: xyz
port number: 50300
user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Custom Adapter - No content in Communication channel Monitoring for JCA

HI,
     We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
     Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
     We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
    Our client needs the entries in CC monitoring instead of Customised Audit Logs.
    Please help.
REgards,
Anurag Garg

HI Satish,
                 Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                 This log creates a trace File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
               Like- Message Successfully put into the queue.
                     - Successfully processed.
                 Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
               I think some extra code needs to be added to activate this in Monitoring.
               Please suggest.
REgards,
Anurag Garg

IDoc adapters not in "communication channel monitoring"?

Hi,
I've modified some information that the receiver IDoc adapter is using (the logical system ID). But after I refreshed all the caches the change is not updated when I send an IDoc to R/3.
When this kind of problem happens with RFC adapter you just have to stop and restart the communication channel in communication channel monitoring. But IDoc adapter is not here... so, how can I restart the IDoc communication channel?

Hi,
IDoc adapter doesnt reside on Adapter Engine, its part of ABAP stack, because of this you cannt find it in RWB-Communication channel monitoring...
Try refreshing the cache:
Transaction: sxi_cache
CPACache refresh using the below url:
http://<server:port>/CPACache/refresh?mode = full
to get the changes affected.
Regards,
Sreenivas.

Problem in Communication channel monitoring..

Dear friends,
I am facing a problem in Communication channel monitoring.
Problem:
I have designed several communication channels in the Integration directory.
To check the status of channel i will go to RWB->Component Monitoring->Adapter Engine->Communication channel monitoring, then we have a selection screen to filter out the channel, adapter,etc..
Here i am NOT seen any channels to filter out. I.e. Channels in the Integration directory are not reflecting here.
Can you please help out on this?

HI,
Do the CPACache refresh .
ALso check this SAP Note- 937382
Regards,
Moorthy

Communication Channel Monitor status using UDF

Similar Messages

Maybe you are looking for