CompactRIO shows as Connected - Running in NI MAX but Labview can't detect it

I'm trying to get started with programming a CompactRIO. Yesterday I had a lot of trouble just getting the CompactRIO to show as connected in NI MAX, but now that it is connected Labview still can't find it. In the "Add targets and Devices" window the "Real-Time CompactRIO" folder shows "<No items found>" even though NI MAX shows the cRIO as "Connected-Running". Any ideas on how I can make Labview see the cRIO?
Solved!
Go to Solution.

Hi DroidFreak,
What model are you using?  Have you tried performing an IP reset, deleting your disconnected targets in max, then reloading the cRIO?
Regards,
Bobby Breyer
Applications Engineer
National Instruments

Similar Messages

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • TS1559 My iPhone 4s shows does connect to my wifi router but then after a while it shows still connected but does not open a page. I have to turn wifi off and on again to get the job done. it is annoying.

    I am using iPhone 4s. I can connect to my home wifi network but it works briefly, then whilr it shows connected with good signal strength, but I can not open a page in safari. I have to turn off the wifi and turn it on again for connection. This goes on and on. Very annoying. Please can anyone solve this problem?

    Hi ,
    thx for the feedback,to clarify my question :
    1-i am able to connect to any wifi network in airports, public places , my home , office , etc.o to get in is no problem.
    2-I can also log in into a specific website eg: was in Paris 2 days ago and could log in into the portal of a wifi provider.
    3-But when i have to log in providing an e-mail address or other info , i get into a loop where i can not get into the next page but i do get always redirected to the page asking all the info.
    This is not only at an airport , i do have it also with my own internet service provider , even if i want to log in from my home into their webmail site i get into this loop where after putting in all the inlog data i get that same page back every time.( i can get mail through my normal mailbox , no problems here)
    I do have indeed OS 6 and it is an iPad 2.I do not have the problem with an iPhone 4 S when i use wifi and here i also do have os 6 !!

  • FF shows on the task bar shows running on task manager but I can not maximize it

    FF shows on the task bar shows running on task manager but I can not maximize it.

    Can you try starting Firefox in Safe Mode. To do that, hold down SHIFT while you click the desktop shortcut or quick launch icon. Then click the '''Continue without making changes''' button.
    If it works in that configuration, then one of your add-ons is the culprit.

  • TS4222 Q:I have my iPad connected to my electrical outlet, but I can't get it to charge. It just says not charging in top right corner. What do I do?

    Q:I have my iPad connected to my electrical outlet, but I can't get it to charge. It just says not charging in top right corner. What do I do?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    Disable your antivirus and firewall, and try again.

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have created an appleid in my windows pc , but when iam trying to signin in the i cloud it shows that your apple id is valid but you can't signin in i cloud . guys i don't have any ios device .please help me out

    guys i have created an apple id using i tunes store on my windows pc and it is validated but when i am trying to signin on the i cloud on my windows pc it shows that your apple id is valid but you can't sign in using this apple id .i don't know what to do can anyone help me out on solving this issue ?

    The only way to open an iCloud account using your Apple ID is on a Mac or an IOS device, there are no alternatives.

  • HT204291 I had AirPlay setup on my iPad but now I can't seem to play movies from the iPad on our tv. I've checked all connections, restarted iPad and AppleTV but I can't seem to resolve

    I had AirPlay setup on my iPad but now I can't seem to play movies from the iPad on our tv. I've checked all connections, restarted iPad and AppleTV but I can't seem to resolve

    As the video is downloaded from iTunes it should be in the right format. It could be a DRM rights issue. Watch this video of how to watch DRM iTunes video on a wi-drive via Safari - http://www.youtube.com/watch?v=Ta6cCegKBqQ

  • I cant connect to my router wirelessly but I can connect...

    I cant connect to my router wirelessly but I can connect directly, Is there anything I can do about this?

    does the wired computer get an ip address from the router ?? check whether it pings the router's ip add ( default ip add - 192.168.1.1 )

  • I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

    I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

  • PC can't connect to AEB external drive, but Mac can.

    Until recently I was able to connect to the external hard drive I have attached to my 1 generation Airport Extreme base station, version 5.6.1, running firmware version 7.6.4. It just stopped showing up one day and it gives me errors when I try to connect saying credentials are wrong, but they're not. I've tried everything I could find, including changing some Windows settings, reverting firmware, resets and a lot more. It used to automatically connect at start up, and showed up as a 'Z' drive, and worked great. The drive is fine as well, that was my first concern. I just connected to it from the File Browser app from the app store, and my other Apple devices, MPB, Apple TV, both see it. Just not my Windows 7 pc. This was my last resort after many hours of troubleshooting. Any help would be greatly appreciated, thanks in advance.

    Standard network troubleshooting.
    1. If you are using wireless plug in by ethernet.. never trust wireless.
    2. If the computer gets an IP from the Extreme.. ping the extreme in a command window.. does it respond? It must respond before worrying about all the rest.. Windows can auto decide it is now in a public location and ram up the firewall. Make sure your network location is home.. and if necessary turn off the firewall.. the TC must respond at least by IP.. name as well would be good.
    3. Open the Control Panel admin tools and make sure bonjour is running as a service. If it has failed stop and restart it.
    4. Try mounting the hard disk directly by IP in windows explorer.
    \\10.0.1.1 (replace with the actual IP address).
    5. If it is only wireless that is the problem.. you probably had some sneaky windows security patch install and that ruined everything.. windows patches are often 2 steps forward.. 3 backwards.. you can no longer be attacked because you no longer have internet connection!!

  • I've just bought a 2nd hand iMac running 10.7.5 but I can't get my HP Laserjet 2200DN up and running. The Applications Printers doesn't have an HP driver

    I've just bought a reconditioned iMac running OSX 10.7.5 but I can't get my HP Laserjet 2200DN printer up and running. I used a Firewire cable to transfer all my stuff over to the iMac from a Power PC G5. However, the printer driver disappeared. The Print & Scan pane in System Preferences is now empty and when I press the + to add a printer the Add Printer pane has nothing in it either. Apple says os 10.7.5 already has printer software installled, but not on my iMac. It says in its list of compatible printers that it supports HP Laserjet 2200 (is absence of the 'DN' suffx siginifcant?) Apple also says to use Software Update to check if software is needed. Manual downloading from Apple, who say they've taken over from HP for this software doesnt' work either - I get a two-part download, one file is an unopenable '.dmg' document and the other is a '.dmg.part' document, similarly unopenable. I'm completely stumped. The HP Laserjet 2200DN is an excellent printer that serves all my needs but I'm beginning to think it may be too old for the iMac, but I sincerely hope not. Anybody out there with workable advice about how to solve this issue? I'd love to hear from you.
    Alex Carr

    Firstly, in Safari you will find a button on the right side of the toolbar: note the downward pointing arrow. If you click on that you will get the download progress bar.
    I don't know what may be the problem with getting the driver working. I suggest you open Print & Scan preferences. CTRL- or RIGHT-click anywhere in the blank Printers list and click on the "Reset printing system" item in the context menu.
    Assuming you have installed the printer drivers you downloaded by running the installer that appears after you mount the .dmg file, click on the Add [+] button to Add a printer. A window should open with your printer listed, hopefully (the printer must be turned on and already connected to the computer. Do a direct connection while getting this configuration set up.) Select the printer. Now, if the driver model name does not appear in the "Use:" dropdown menu, you will need to look for it in the list of available drivers. Once found, select it, then click on the Add button.

  • HT3819 I can use remote on my iPhone to connect with my iTunes library, but i can't connect to another computer using home sharing to access apple tv.  I have used the same access ID and password that is used for the apple tv.

    I can use the Remote app on my iphone to connect with my itunes library on my computer, but I can't connect to the Apple TV using home sharing with another computer in the house.  I am using the same ID and password that the apple tv uses to connect with the other computer.  Also how do I check what version of IOS that my iphone is using?

    Version:
    iOS Settings>General About (or it'll say when you hook it up to iTunes)
    Are all the devices on the same physical network?  I think you're saying all are set up using the same home sharing credentials.
    If you've not done so restart all devices and your router.
    If you can get any of the devices connected by ethernet to reduce the wifi burden that may help but to be honest I would not expect simply beoing on wifi to prevent devices/computers appearing in the list.
    Does the other computer have any firewall or port blocking software running?

  • I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square but never downloads.

    I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up with a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square, acts like it's downloading (which I can see happening in iTunes), but never downloads. The Cloud just stays there.
    I've sync'd my phone, I've turned it to "show all music" in Settings, I've drag and dropped the songs/albums onto my phone again. I feel like I've tried everything I've seen recommended, but nothing works.
    I've purchased a lot of music from iTunes. It should be there. What's going on?
    P.S. Same thing happening with my purchased books. Ugh.

    Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match.  Your iTunes Match library will then appear on your iOS device.

Maybe you are looking for