I've just bought a 2nd hand iMac running 10.7.5 but I can't get my HP Laserjet 2200DN up and running. The Applications Printers doesn't have an HP driver

I've just bought a reconditioned iMac running OSX 10.7.5 but I can't get my HP Laserjet 2200DN printer up and running. I used a Firewire cable to transfer all my stuff over to the iMac from a Power PC G5. However, the printer driver disappeared. The Print & Scan pane in System Preferences is now empty and when I press the + to add a printer the Add Printer pane has nothing in it either. Apple says os 10.7.5 already has printer software installled, but not on my iMac. It says in its list of compatible printers that it supports HP Laserjet 2200 (is absence of the 'DN' suffx siginifcant?) Apple also says to use Software Update to check if software is needed. Manual downloading from Apple, who say they've taken over from HP for this software doesnt' work either - I get a two-part download, one file is an unopenable '.dmg' document and the other is a '.dmg.part' document, similarly unopenable. I'm completely stumped. The HP Laserjet 2200DN is an excellent printer that serves all my needs but I'm beginning to think it may be too old for the iMac, but I sincerely hope not. Anybody out there with workable advice about how to solve this issue? I'd love to hear from you.
Alex Carr

Firstly, in Safari you will find a button on the right side of the toolbar: note the downward pointing arrow. If you click on that you will get the download progress bar.
I don't know what may be the problem with getting the driver working. I suggest you open Print & Scan preferences. CTRL- or RIGHT-click anywhere in the blank Printers list and click on the "Reset printing system" item in the context menu.
Assuming you have installed the printer drivers you downloaded by running the installer that appears after you mount the .dmg file, click on the Add [+] button to Add a printer. A window should open with your printer listed, hopefully (the printer must be turned on and already connected to the computer. Do a direct connection while getting this configuration set up.) Select the printer. Now, if the driver model name does not appear in the "Use:" dropdown menu, you will need to look for it in the list of available drivers. Once found, select it, then click on the Add button.

Similar Messages

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I have just got a replacement iphone 5 but I can't restore my old backup that is ios7 because the replacement is ios6 I have changed my UDID on the developer site but still no luck any suggestions anyone?

I have just got a replacement iphone 5 but I can't restore my old backup that is ios7 because the replacement is ios6 I have changed my UDID on the developer site but still no luck any suggestions anyone?

You are in breach of your Developer agreement by posting in a Public forum

HT201210 I have just connected my Ipad to my mac and went to upload all the pics from my mac onto my ipad but doing so it has overwrote everything on my ipad and therefore the pics on my ipad have gone!!!

I have just connected my Ipad to my mac and went to upload all the pics from my mac onto my ipad but doing so it has overwrote everything on my ipad and therefore the pics on my ipad have gone!!!
Help - I have tried the restore but it didn't put back my photos it just started to sync the ones that had overwrote my old ones!!!

I took the orginal photos on my iphone over the past couple of years and bit by bit i uploaded them onto my sony lap top in albums... Nothing to do with itunes...
A few months ago as my laptop didn't seem as reliable so i uploaded all the pics onto my ipad from my laptop, it was today where i thought i will upload more from my phone onto the mac then onto my ipad but insted it overwrote all the pics on my ipad.
I had tried to do the back up and it didnt work the photos were lost.
Then my ipad later today was driving me insane and wouldnt delete any of the pics so i just restrored it back to factory settings.
My laptop has had issues so i have in restored all that to.
I will now in the future just upload from my phone straight to my mac and not mess about wanting pics on my ipad.
I appricate your help but i am pretty sure i have lost all of my photos... My kids 1st day at school the lot...

HT204053 support states you can't merge apple ids, but it does give you an option to edit. Im sure there's a reason, but why can't I sign in to 1 account and edit the name to match the 2nd account?

support states you can't merge apple ids, but it does give you an option to edit. Im sure there's a reason, but why can't I sign in to 1 account and edit the name to match the 2nd account?

Shelady wrote:
... (wasn't even aware my gmail account had anything to do with Microsoft) ...
It doesn't. Gmail is owned by Google.
Shelady wrote:
Also can someone tell me how I report spam on my iPhone and iPad in a gmail account?
Report it to Google:

Can anyone tell me or give me a link to the latest response from Apple regarding very real weak wifi signal on what seems to be a batch of both the new ipad and the earlier Ipad2. I have just bought a 2nd hand ipad2 and it has a very weak wifi signal

Over the last week or so I have been trawling the internet looking for references to weak wifi signals on the Ipad2 and was staggered by the sheer quantity of people who seem to have identical issues, not just with the ipad2 but also with the new ipad. What annoyed me most from reading the reams upon reams of comments made on the Apple community forum is the fairly large number of people who seemed to believe that 'these' people were either just moaners and wingers or else they must have something wrong with their router set-up rather than a serious fault with their ipad and it seems all because there ipad in question works like a dream.
Obviously I can only speak from my experience, and that is, I have an ipad2 32GB with wifi, purchased about 6 months ago and it works like dream with a good 2-3 bar wifi signal through 2 thick stone walls over 30 feet away. My router is a standard one supplied by my broadband supplier compatible with all 'g','b' and 'n' equipment. However, over a week ago now I bought second hand genuine ipad2 16GB with wifi from a close friend who has just purchased a new ipad3 to replace his old ipad2 (had it for over a year so no longer under warranty). When I started it up downstairs from my router, where I always use my other ipad2 which has a very strong wifi signal, I discovered that the new secondhand ipad2 I had purchased couldnt find a network signal at all. So after doing network resets and all other 'fixes' on the device recommended, I took it upstairs to my office where the router is based and found that the device could now locate the network, but the signal was lost over only 12 feet from the router!
I quizzed my good friend about this issue and he informed me that it has always been like this since he first purchased it and he never thought that it was a fault, it was just the way it was. When he first aquired the device he did think at the time that this distance was poor, but thought nothing of it as he didnt have any other ipad to measur ethe signal strength against, and as his router was in his living room anyway he nothing of it. Fair enough.
So, there we have it. One ipad2 with a very good wifi signal and another ipad2 with a very poor wifi signal running off the same router, both with the same IOS 5.0. ?
As well as all of the other isues that customers have picked up on, such as 'death grip' (which I must say does appear to happen, but personally i dont think that this is a serious issue if you are aware of this issue and have a strong signal anyway), my experience seems to be a good example of a 'duff' wifi ipad versus a 'great' wifi ipad', an issue confirmed by complaints from a fairly large number of customers who have also reported the same or similar weak wifi signals with both the ipad2 and the ipad3. So, as this shows the weak wifi signal is a very real issue it seems on a batch of ipad2 and 3's, which to my logic is obviously a hardware issue on a batch of early ipad2's and not a software one, otherwise all ipad's would suffer this problem! So, is it a faulty antenna or a faukty network card in an early batch?
So, the bottom line now is, of course, firstly, how can I get Apple to fix my other ipad2 when the warranty has run out? Any suggestions anyone?
Personally I think good Apple customer service should offer a recall with a replacement on this apparent batch of ipads, dont you?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I bought Smart Photo Converter which do,s not work but i can't get any refund , i have contacted the company but no reply and that was two weeks ago...so do you talk to someone at the App store?

I bought Smart Photo Converter which does not work but i can't get any refund , i have contacted the company but no reply and that was two weeks ago...so do you talk to someone at the App store?

Mac App Store Support -
http://www.apple.com/support/mac/app-store/

I have just bought a brand new iMac 27" with Snow Leopard but the MS office 2011 is running too slowly to even use...help!

I have litterally just bought my iMac with 2.7GHz Intel Core i5 and 8GB 1333 MHz DDR3 so why is Word barely functioning?! I have more than enough free memory but Word is operating so slowly it takes a full minute for the cursor to stop spinning after selecting a section of the page to start typing in....it is utterly unusable in this state and I am very angry that this should even be an issue with a brand new iMac!
I would really appreciate any help or advice you have to offer.

Will not use up a license.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

2nd hand iMac osx wired keyboard responds but doesnt type stuck at registration screen Help!?

So i just brought this iMac second hand its fairly new and it has osx not sure what version, wired keybaord and mouse, mouse is plugged into keybaord and works, keybaord works and makes noises but doesnt respond and type the letters, volume and brightness are the only things that work on it, im currently stuck on the registration screen and can't go any further. I tried plugging in my other keybaord from this pc and it just sat on the identifying keybaord screen. has this happened to any one else?? and can anyone help me if its a software issue or is there a way to format an imac with a secret button or something haha.. this is my first mac and want to use it as a studio computer for recording music so im clueless about them cheers any help would be sick

Is it asking you to identify the keyboard? If so it is asking you to press the key that is right next to the shift key. Press the up key and it should continue. A pc keyboard should work with out issue. If you have to reboot thats ok to the setup assistant should restart.
It sounds like the mac keyboard has some issues.

I just bought a new MacBook Pro Quick Time 7 icon but how do I get it to work? Do I need to purchase an additional update?

I just bought a new mac book pro. It has Quick time 7 icon on it but how do I make it work? I am a student and have a quick time video I need to play but the video won't play. Do I need to purchase an update on Apple?

It has a question mark inside the quick time logo everytime I click on it
If you mean you are trying to play a file and the QT icon with a quesion mark appears in the display area, then this means the play has reached a programming disjunction and doesn know what to do—i.e., the player recognizes the content but something is preventing proper playback is telling the user it has a question as to how the content is to be played. In such cases you normally have to determine what content, what file container, and which player version is involved before you can decide how to best fix the problem.

I have just bought a 2nd hand MacBook pro and need to wipe the previous owners details. How do I do that?

Hiya, so I've got this old MacBook Pro and need to wipe the admin user but have no password to work with. Can anyone tell me the easiest way to get rid of her and set myself up please? Thanks.

You will need the original Tiger installation disks. Insert the install disk, open Disk Utility from the UTILITIES menu, erase the HDD and inatall the OSX. That will create your own Apple ID. The second option is to use a retail Leopard or Snow Leopard disk instead, but they do not come with all of the applications.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.

I've just bought a second hand iMac G4 (w/OS 10.5) for my kids and would like to use Firefox, preferably in the Dutch language. Were can I find and download a (NL) version of Firefox that will run on this Mac? Best regards, Jan B. Bussemaker

Bij voorbaat dank!

For older Macs that aren't supported in Firefox 4 / 5 / 6, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/ <br />
http://code.google.com/p/tenfourfox/downloads/list
Or use Firefox 3.6.x, which is the last version from Mozilla. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

I'm using Tiger 10.4.11, I had to wipe my drive an reload my whole operating system recently, now my Itunes does not work, it says It's version 4, what the heck is version 4, where can I get a compatible version that works, and accesses the store like I

I'm using Tiger 10.4.11 and had to wipe my drive and reload my system from the install discs yesterday,
Now I'm running Itunes version 4! It won't let me access the store, I've tried everything on the help pages,
EVERYTHING, I need a older version of Itunes, but not as old as version 4, which, no, it will not upgrade
automatically for me, it says no upgrade available. Why does Mac not support older versions of
its operating systems, why do they make it so hard to find help for those system users other than
the money of course, but have you seen the stock lately? They got enough money.

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

HT1150 I have an iBook G4. My epson stylus printer is not fixable so I went to Best Buy and bought an XP400. It is all set up but I can't get the printer to communicate with the computer. Have tried everything I know and it won't work. Any ideas?

I have an iBook G4. My epson stylus printer is not fixable so I went to Best buy and bought an XP 400 (Epson). When I went to set it up it wouldn't talk to my computer. So it looks great but won't print After 2 days and many phone calls I am disgruntled to say the least. Any suggestions?

I would imagine the drivers supplied with the printer will not be compatible with your existing operating system.
Download the older drivers for your OS here, and then try the install again.
Epson Print Drivers

Can i track or find my stolen ipod with just a serial number bought it 2nd hand?

i bought my ipod touch 2nd hand and its been stolen....can i track it online without find my iphone or anything. since i bought it 2nd hand it wont let me add the device to my account settings because the original ownr did that

You cannot.
The only way to track it would be from icloud.com/find my iphone

I've just bought a 2nd hand iMac running 10.7.5 but I can't get my HP Laserjet 2200DN up and running. The Applications Printers doesn't have an HP driver

Similar Messages

Maybe you are looking for