Companion Link & ACT Database

I have a 8520 and sync it with our ACT 12.x database.  ACT recently released an update/hotfix and since then I have been unable to sync. 
I am using DM 5.0 and Companionlink Pro 3.0 Build 3107 on Windows 7. 
Has anyone been successful syncing with ACT since the update?  If so, did you have to do anything special?
Thanks,
David

Hi everyone,
Thanks for you patience! We've been working hard at this the past week, and we're happy to announce that the latest build of CompanionLink now supports BlackBerry Desktop 6. For more information on how it all works, and to download the latest build of CompanionLink, visit www.companionlink.com/bb6
Kaena M
CompanionLink Software
www.companionlink.com

Similar Messages

  • Synching with ACT 6.0 using companion link

    I have recently pourchased  curve.  I have been synching for several years to a Treo with companion link from act 6.0.  I have been uising companion link with the curve and it works accept for activities linked to my personal record.  I have looked at every setting imaginable, but cannot figure this out.  Anybody know how to make personal activities sync with everything else?

    Terry,
              This is a known problem, and CR058420 was opened to address this
              issue. For 6.0, there is not a patch available. The recommended
              solution is to upgrade to 6.1 and apply the appropriate patch.
              Thanks,
              Simon
              Developers Relation Engineer
              BEA Support.
              Terry Carter wrote:
              > we use weblogic as a webserver with one of our web applications.
              > The index.html page is a soft link pointing to one of 2 pages.
              > 1 page is a site up page and the other is a site down page.
              >
              > Using a soft link worked fine with WL60 sp1 but when we moved to SP2
              > we now get a 404 when trying to load the index.html page.
              >
              > Any ideas why this would be broken?
              >
              > Terry Carter
              

  • Trying to Sync Z10 via Companion Link with ACT 2013

    Hi All,
    Looking for some help with the following issue: When I try and sync my Z10 via Companion Link with Act 2013 I get an error message in blackberry link then the sync fails:
    C Preferences Manager: Configuration Value for / Preferences / Account_1_65537/ DevicePin not set in Transconfig.xml for translater RimBB
    used to work sometimes until i updated the software. would be gratefull for any ideas
    Dave

    I have no experience with the third-party application you are referring to but I have the feeling that it is designed to sync with devices using Legacy Conduits.
    Legacy Conduits used on OS4 and before (and a very few of the early OS5 devices): Date Book, Address Book, To Do List, Memo Pad.
    Extended Conduits used on modern devices: Calendar, Contacts, Tasks, Memos.
    Post relates to: Palm TX

  • HELP! I am in ACT 2007, Palm Centro 6.2, Companion Link and Windows Vista Syncronizing He...

    I mostly blame ACT. I have 2007 and they reccomended ANY Palm. After purchasing my new Palm Centro I purchased and downloaded the ACT synchonizing program. Upon download, it said they weren't compatible. I called ACT who then said they knew exactly what I needed. A third party software called Companion Link. I purchased that from ACT. When downloading, it says it is not compatable with anything over 6.0 ..I called them. They said I can dowload the older Palm Desktop and it would work. Before I do one more thing....I want to be sure I shouldn't start completely over. I am still inside the 30 days with my Centro, which I like, but everything I need for work is on my ACT so synchronizing with that is most important. If I have to purchase ACT 2008 I will but if I can find a fix (maybe Palm OS desktop) first then I will try that. At this point, if I could move everything away from ACT I would consider that as well. I have just used it for so long to tract contacts, etc. I don't use too much of the fancy stuff. Did I mention I am on Windows vista as well. I'm sure that's one more thing to consider.  I am two weeks and several hundred dollars down. HELP
    Post relates to: Centro (AT&T)

    Welcome to the Palm Forums,
    Ok, thanks for all that information. First off if you sync to a lower version of Palm Desktop you will not be able to sync programs over to your device. And if you are able to it works part of the time not all the time. Also what was your other device before you moved to the Centro? We might be able to grab the information from that device (if you still have it) and move it to the Centro depending on the device type.
    Outside of that there are others here that could help you with the ACT and Companion Link applications but unfortunately I don't know much about how those programs work. But if you want to move away from them message back here and I will help you.
    Post relates to: Palm Z22

  • SERIOUS PROBLEM Synching Palm Pre Plus (Verizon) with Companion Link OS USB -- NEED HELP!!

    I am having serious problems with Companion Link OS USB synching with Palm Desktop 4.2 via USB on my Verizon Palm Pre.
    The Verizon phone is my second Palm Pre.  (The original Palm Pre which came from Germany worked perfectly with Companion Link).
    The Verizon Palm Pre is a Palm Pre Plus.
    As noted I utilize Palm Desktop software Version 4.2.0 on my computer.
    I started out with Companion Link software Version 3.0 Build 3096  -- and have worked my way up to Version 4.0 Build 4008 over the last few months, and have spend hundreds of hours trying to solve the synchronization issue described in detail below.
    The Companion Link software is configured to ONLY synch one way
    FROM my Palm Desktop on my computer to the phone via USB
    (I don’t want to put my contacts and calendar on the web, NOR do I like the way Google contacts works, even if I DID want to). 
    When I synch the Palm Desktop to the Palm Pre the following occurs:
    The Calendar synchs fine.
    The contacts do NOT synch properly. 
    I have 1,500+ contacts in my Palm Desktop. 
    For some inexplicable reason, during the synch process the approximately 1,200+ of my contacts are compiled under ONE contact listing (John Davis). The icon by the contact shows that TWO contacts are linked under John Davis, however when I click on the icon to see who is linked under John Davis, NO contacts appear.  But I have the option to link additional contacts under John Davis if desired (AS IF!!).
    So, 1,200 of my contacts do NOT appear in the contact list.  If I want to call my husband, and type in Bruce, NOTHING comes up.  BUT if I type in his phone number, the listing for John Davis comes up and shows me all the numbers that legitimately belong to my husband.  Ditto my friend Susan, etc for the other 1,200 contacts buried under the contact listing for John Davis on the phone.
    SO, if any of these 1,200+ people, call me or text message me, my phone tells me I have a call or a text from John Davis.
    I cannot look up my contacts to call them or text them because the contacts do not actually APPEAR under John Davis (If the phone were just linking them and SHOWED them, I could manually de-link them).
    FURTHER, when I get a text message from anyone who is compiled under John Davis, the text message is truncated.  I can see the notification that I got a text message from John Davis, and I can see the first few words in the notification area, but if I open the text message, it appears to be blank (this only happens after synching Companion Link – before linking Companion Link all text messages are fine.  AND, if I get a text message from one of the 300 or so contacts that actually synch into my phone correctly, the text messages are perfectly fine and work normally.
    I have worked with BOTH the Companion Link technical support people AND the Palm technical support people extensively in an effort to solve this problem.
    I have done Full Secure Erases and started over trying to get the phone to synch more than 35 times at this point. 
    I have tried synching from different computers
    I have had Palm replace the phone TWICE (so this is actually my third Verizon Palm Pre Plus).
    I have run Web OS Doctor
    Nothing helps.
    Every time the phone does exactly the same thing described above.
                When I synch the phone it tells me:
                Web OS:     Added             1543/1543    Contacts to the phone
                PC:              Updated          1232/1232     Contacts
    (The 1232 contacts being updated are the 1232 that are compiled under the one contact listing of course).
    Needless to say, Companion Link says it is the phone. 
    Palm says it is the Companion Link third party software.
    Since it is the same 1,200+ contacts every time, I have had both Palm and Companion Link examine my contact database to see if they could identify anything amok about these 1,200+ contacts, but there doesn’t appear to be any difference between those contacts and the 300 or so that synch into the phone properly.
    Companion Link has told me variously that:
    -  This is a very rare Synergy issue and that I must turn off the Synergy feature on the phone (would that this could be done per Palm it can NOT be done).
    -  Only TWO people have ever had this issue (me and someone else unnamed);
    -  That this is a common problem with the Palm Pre, but Companion Link works fine with every other phone
    -  I e-mailed them my contact list and they SWORE to me that they were unable to duplicate my problem on their computers.  (I don’t believe this)
    -  AND has most recently told me that there is nothing more they can do for me, that I will have to find a solution myself.
    Palm has said that there is nothing they can do for me if third party software doesn’t work properly with the phone.
    This does appear to be the Synergy feature run amok.  But how to correct it???????
    I love the Palm Pre.  I love my Palm Desktop 4.2 software.
    If I can’t get this fixed shortly, I guess I’m going to have to move back to a Treo 680.
    Does anyone out there please, please, please have a solution or a suggestion that will help?
    Post relates to: Pre Plus p101vzw (Verizon)

    Hello,
    I am almost as frustrated as you.  Purchased my pre plus back in may and bought the companion link software immediately  ( I have synced via usb for years on other palms to lotus notes)  All the information from companion link states that it does the job.  I only need to sync my calendar, no contacts.   I have put in a ridiculous amount of time with palm, my IT department and Companion link,  IT HAS NEVER EVER EVER WORKED.   I deleted, re installed, upgraded, tried different steps in different orders, I have gotten a new phone, tried it on multiple computers.  NOTHING WORKS.   Probably been through all these steps listed 50 times by now.  Actually I think that companion link doesn't work for palm pre plus, they just are not willing to say so and advertise that is does work. 
    I am extremely disappointed in my pre because of this.  I did my research before making my purchase, it appeared possible.    I WAS a long term palm user.  Currently looking at new phones and never again a palm.  Companion link should be more careful about what they say they can do.  One of the service techs actually told me that if I wanted it to work I should ditch my palm.  That's service for ya.
    Good luck,  the fight got the better of me.  I am done.

  • Linking logical database to TABLE in query

    Can we link Logical Database to Table during query creation in tcode SQVI
    Message was edited by:
            rohith modi
    Message was edited by:
            rohith modi

    go to sqvi and select "Table Join"in data source and enter title select radio button for "basis mode" and enter u reach a new screen in that new screen press "insert table" and give ur table name and again  press "insert table" and give another table in thsi way we can joint table in ABAP query.
    reward points if it is helpful

  • Companion Link

    I upgraded to DM 6 and Companion Link 4.0 to sycn my 9000 with Goldmine 7. I sync from GM to BB only. Here's what happened during sync: Cleared Appointments reappeared on my GM calendar. (this should be impossible); sync ran for over 3 hours (normally 15 minutes with old DM 5 and Companion Link 3) and, also, finally just crashed.
    Frustration only begins to describe how I feel. Help!!!!

    Hi everyone,
    Thanks for you patience! We've been working hard at this the past week, and we're happy to announce that the latest build of CompanionLink now supports BlackBerry Desktop 6. For more information on how it all works, and to download the latest build of CompanionLink, visit www.companionlink.com/bb6
    Kaena M
    CompanionLink Software
    www.companionlink.com

  • Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

    Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

    Hi Ken,
    Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
    I am looking at a product called wmobile, but may be problematic on my current system.
    thanks for any help...

  • Links in database

    I am trying to find out if it is possible to set up links in database (Appleworks 6), and if so, how. Right now, the links screen pops up, but won't actually let me do anything. Any suggestions?

    Hello
    The responce is simple: we can't use links in AW6's database.
    I know that the menu item is not greyed but it is one of the bad old oddities we have to live with ;-(
    Yvan KOENIG (from FRANCE mercredi 25 avril 2007 19:43:38)

  • Odbc connection test success but can't link the database to oracle with 1013 call failed error.

    i am using my MS Access 2013 to connect with my oracle database. I created the odbc link and successfully have connection test pass. However i can;t link the database with my MS access. When i am using different software (mapinfo), i am able to connect to oracle database. The error is"1013: user requested cancel of current operation"

    In MS access, i open the external data and select odbc. Select my odbc link created previously, enter the password and after a while the error message pop up.
    But if i am using another tools, such as SQL Developer or Mapinfo, i will able to connect to oracle database using the same odbc link.

  • Having Trouble Linking mySQL Database to Website

    I am considering a move of all my websites into Azure and setup a test account this afternoon with the free trial.  I've been able to setup the website; however, I'm having issues with the creation - more specifically the linkage - of a MySQL database
    to the site.  I've tried to link the database in a number of ways including both the existing and preview portals in addition to trying to create the new resource instead of linking. In each scenario the database is created but the linkage fails. 
    The message I keep getting is:
    Could not link resource '>DB Name>' to web site '<Site Name>'.
    Am I doing something wrong?

    hi sir,
    Thanks for you posting!
    Firstly, please make sure your MySQL database in host on Azure, not in your project.
    Secondly, if your database is create on Azure, I suggest you could try those step:
    1.delete the entire website
    2.create a new website and select add the existing MySQL database as a Linked Resource .
    Also, please see this similar issue post:
    http://stackoverflow.com/a/12198776
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • XP SP3 with Dreamweaver can't link mySQL database

    My OS is XP SP3
    When it sets linking to database would show the error message
    " HTTP ERROR! 403 STOP"
    I have tried these two solution method
    install this : Dreamweaver Extention Fix  and "Resolved issues with Dreamweaver MX 2004 update (7.0.1)"
    but the situation is the same!!
    how can i do ?

    Because of XP SP2 preventing access between Dreamweaver and MySQL,
    DW have provided two kinds of method to solute these problem.
    But it doesn't work in XP SP3.
    Who can help me?? SOS!

  • Linking 2 database in toad

    Hi Pals,
    How to link database 1 to database 2 in toad.
    Thanks in advance

    user633962 wrote:
    Hi Pals,
    How to link database 1 to database 2 in toad.
    Thanks in advanceAs it's mentioned above, you have to create a database link to link two databases. Please read the documentation:
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_admin.htm#i1007820
    Kamran Agayev A.
    Oracle ACE
    My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

  • Error in Check transport tool" DB Connect Link to database failed"

    Hello Guys,
    I am trying to close a request but I can't , the return this mensage :
    <b>"Test call of transport control progam(TP) ended with return code 0232"</b>
    when I try to check transport rout, I see the error below :
          <b>  DB connect            Link to database failed                  
            Offline call                   connect failed                           </b>
    My Database is SQL SERVER 2000
    Thanks

    Hai....
    Just i want to confirm, was STMS was configured previously,
    if No, Configure it .
    If yes log-in to the Domain Controller system 000 client, and execute the T-code STMS, From the menu goto Overview -> Systems
    you will be displayed all your systems, by selecting one by one system execute " Update Configuration"  from SAP System Menu.
    Regards
    KHS

  • Cabling problem? - all status LEDs flash - Link/Act, Full/Col and "100"

    I have a CAT5 cable installed in my house. When I connected it to my WRT54G router and computer I have on the router all three of the Link/Act, Full/Col and 100 LEDs flash in sync. My PC tells me the LAN cable is not connected. I have reterminated the cable and still get the same dispaly on the router and message on my PC. The manual is silent on this. Can anyone help? The router's firmware is V1.02.0 and the router works fine with other cables connected to the other ports.  I have tried all the ports with the cable in question. Thank you.
    Message Edited by snowrider on 07-21-2006 11:58 AM
    Message Edited by snowrider on 07-21-2006 11:59 AM
    Message Edited by snowrider on 07-21-2006 12:02 PM

    Hello,
    solved the problem by my self. One statement was missing. IT was reverse-route, which is requiered to create the routing entries.
    crypto dynamic-map CRYPTO_ISAKMP_CLIENT 1
      set transform-set VPN-TRANSFORMSET
              reverse-route

Maybe you are looking for