Company code not showing in the shopping cart list

Hello,
Can anyone please help me with this?
Currently we are on SRM 5.0 with extended and connected to one backend system. Everything works good. Now we are trying to connect another backend system to SRM. The situation is that we have made the same copy of our backend and using it as another backend system. Both backends will have the same product categories, purchasing organization. We are using BADI to determine the backend system based on company code. When I change the company code backend system for the user in org strcuture, the same company code do not show up in the shopping cart list while creating.
We have made most of the org structure changes, but still I am not able to find the exact reason why the company code is not coming in the list. Can anyone please help?
Thank you
Kishore

Hi Kishore
Whaever you have inherited in the Attribute BUK or Function tab , you can receive that comapany code in the shopping cart.
all sc value comes from Org structure.
run bbp_check_consitency for your user SC.
however now your landacape is equivalent to two ECC and one SRM systems.
Muthu

Similar Messages

Work flow not created for the Shopping Cart

Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

Hi,
what do you see in SLG1? Check the below t.codes
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Saravanan

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

Check Status BBPSC04 showing all the shopping carts

We are on SRM 5.0
When a user clicks on Check Status. It is showing them all the shopping carts even those which are not created or approved by them.

Hi Srini,
In 'Check Status' all the shopping carts are shown if you do not give anything in the search criteria except the ones that are completed irrespective of the purchasing org / P.group.
If you want to see the shopping carts created for that P.Group / P.org mention the same in the search criteria of the 'Find' tab.
If you want to see the shopping carts only created by you then go to 'Centralized Purchasing' Link and click on the ' Check Status'. There you can see only the shopping carts created by you.
In case of any clarification feel free to ask.
Award points for suitable answers.
Rgds,
Teja

I want to backup my iphone to my macbook. This option is not showing in the control click list

I want to backup my iphone to my macbook. This option is not showing in the control click list

You mean with the same iCloud account?
If so, yes this is possible by accessing the iCloud account with the Mail.app on your Mac and with the iPad and iPhone Mail app. This allows for keeping server stored email account mailboxes synced between all three, syncing contacts, calendar events, notes, and Reminders synced between all three, and the same with the iCloud Photo Stream. In addition, you can have music, books, and apps purchased/downloaded from the iTunes store with one device automatically downloaded on the other devices.

Treatment of exchange rate difference- company code not appear in the list

Dear guru,
I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
Also, please be noted that we configured accounts for KDM, PRD in OBYC already
Appreciate your respond.
Thanks and best regards,
Hong

Hi,
Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
> Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
> Configure How Exchange Rate Differences Are Treated
> Configure How Unplanned Delivery Costs Are Posted
> Edit PO Supplement Text in Invoice Verification
> Set Check for Duplicate Invoices

Music selected for purchase not showing in my shopping cart

Lately I've been having this problem where I do an Itunes search for some music. When it shows up I click the "Add album" button which should put it into my shopping cart. Then when I want to check out, the music isn't in my cart. When I try to re-add I get a message from Itunes saying the item is already in my cart and can't be added again. I return to my cart and it still isn't there so I can't purchase it. I'm on auto-upgrades for so my version of Itunes should be current. This doesn't happen every time but often enough that I've noticed and its really getting annoying.
Very frustrating when it happens ! Anyone else have this problem ? If so what is it ?

I read through this thread because I'm having the identical problem. The thread doesn't really give a solution to the problem ....just that for [you] it resolved itself mysteriously.
What I'd like is the opportunity to empty my cart, but I can't since there's nothing there to empty.
My main concern is that, since when I try to re-add the item, I get the message stating that it's already in my cart, when [and if] I do use the cart to buy something else, will these items be download, or will it download only the items that are visible. This is all new to me since I've only ever used the one-click buying option without the cart. Is this an idiosyncracy of the software, the server, the individual purchased item, or what???
Any and all suggestions welcome.
Joseph

CD icon will not show in the iTunes source list

My brother just got the 5G iPod and whenever he puts a cd into the drive, iTunes will not show that there is a cd in the drive. What's wrong?

See this...
iTunes Does Not Recognize Audio CDs
btabz

ATV not showing in the iTunes device list? Check your HTTP proxy config

Seems like many people are having trouble getting their ATV to show up in the iTunes Devices list. Here's my situation, and the root cause:
1. I have a small network at home consisting of one LAN with a number of computers, and a gateway router that provides DHCP, DNS and HTTP (web) proxy services
2. I found that my ATV would display in the Devices list only when the ATV and at least one Mac were isolated from the rest of my network; when I connected them back to the rest of the LAN the ATV disappeared from the Devices list (in the simplest case this isolation was a crossover cable between the Mac and ATV)
3. when connected to the whole LAN, the ATV could successfully contact the iTunes Store (trailers, etc) but would not show up in the Devices list
4. I could ping the ATV from the Mac running iTunes every time (i.e. I did not have a basic connectivity problem; e.g. "ping appletv.local." always worked)
5. I started with my ATV on v1.1, when I upgraded to 2.0 and turned on the the iTunes' "Look for remote speakers connected with AirTunes" option ATV always appeared in the speaker list (i.e. even when it wasn't in the Devices list)
I had gone through the Apple troubleshooting guides, with no change.
After a lot of elimination I discovered that my problem was with my web proxy settings: my Macs were configured to use my gateway router for HTTP, and it seems that iTunes connects back to the Apple TV via HTTP - these requests were sent to the proxy and rejected (as they were for an address on the inside LAN; this is the way my proxy was configured).
I fixed the problem by using a PAC file specifying my LAN as "DIRECT" (e.g. below). An alternative would have been to configure my proxy to allow connections from the LAN back into the LAN (but be careful about allowing access from elsewhere, e.g. the Internet).
Here's my PAC file: my LAN is in the 10.0.0.0/8 address space, domain *.home.lan. (iTunes seems to contact the AppleTV via it's IP address, e.g. http://10.0.0.169:3689/ript/fp-setup?fairPlayID=4a5...):
function FindProxyForURL(url, host)
// simple hostname
if (dnsDomainLevels(host) == 0) {return "DIRECT";}
// match Host against local domains (w/ optional :port)
var dom = /(127\.\d.d+.d+|.local.?|10.d+.d+.d+|.home.lan.?)(:d)?/;
if(dom.test(host)) { return "DIRECT"; }
// All other requests go through port 8080 of proxy
// should that fail to respond, go directly to the WWW:
return "PROXY proxy.home.lan:8080; DIRECT";
The reason the ATV was successfully appearing in the Devices list when it and a Mac were isolated from the rest of the LAN was that the Mac was unable to reach the proxy, and falling back to the 'DIRECT' connection.
Note: if you don't have basic connectivity, e.g. if ping appletv.local. doesn't work, then the above is almost certainly not your problem.
Ben
Message was edited by: af3556

Hi There,
I have the exact same issue going on that this person described in this thread, but with the EXCEPTION in my case being that, after I have plugged my device into my laptop and uplugged it (about 10 consecutive times), my iTunes FINALLY recognizes my iPod Touch.
This is extremely frustrating to have to go through this scenerio each and every single time I want to synch and charge my Touch. Is there any way to correct it, so that the device would be recognized immediately when I first plug it in? It used to work this way (prior to the v.10 update, most likely).
Thanks!

Font showing in photoshop font list but not showing in the flash font list

Hi,
I have some issues with fonts. I am using a Mac OS X and i have installed the fonts into font book.
The installed fonts are showing up in my Photoshop CS3 font list but are missing from my Flash CS3 and CS4 font lists.
I am using .otf fonts.
Any help will be really appreciated .
Thanks,

Jude,
I don't know what the problem may be, sorry.
Since the fonts are not from Adobe, you'll have to either contact the foundry from which you've licensed them or post this issue on the Flash forum at http://forums.adobe.com/community/flash/flash_general

SAP FIORI LEAVEAPPROVAL - Scenario configuration does not show in the drop down list /GBHCM/LEAVEAPPROVAL ?

We are in GBHCM003 600 (SP 10). Do we need implement anything else? Do anyone know which SP, the UIHCM003 100 (SP 05) comes from ?
/GBHCM/LEAVEAPPROVAL is available in the ODATA services and i have added already.
Thanks Uma.

Hi,
Same problem. We have installed UIX01HCM and following the implementation information on Sap Help for Approve Leave Request
http://help.sap.com/fiori_bs2013/helpdata/en/88/a2675283776f2de10000000a44176d/content.htm
The information recommends using service /GBHCM/LeaveApproval (1)
We dont see this in our system.
1) How do we get this service?
If this is not the recommended service anymore:
2) where is the information or service for the new implementation?
Thanks,
Mark

How to show purchasing group members in the item data of the shopping cart?

Dear Experts,
for s shopping cart in SRM 7.0 CS, i have the following business requirement:
In the item data tab of the line item details, the drop down field for Purchasing group is there. Right to this field, there is also a link called "Show members".
If i go on this link, than a small table opens that obviously is there to contain such additional information about the purchasers like name, telephone nummber or extension.
Currently, this small table does not contain any of this additional information for any of the used purchasing groups.
Can you please help me understand, how and where i can maintain this information in the sytem, so it shows in the shopping cart?
Thank you very much for your help.

Hi,
thank you very much for the answer.
Actually, the question is not how to create the organizational unit of purchasing group in the PPOMA. This is all done. I just would like to understand, whether there is somewhere a place where i can maintain the name and maybe also the phone number of the buyer himself.
Thus, i would hope to see these details (i.e. the name and the phone number) in that small table that opens up if i click on the "Show members" link that is situated right to the purchasing group field in the "Item data" tab of the details of the line item.
Thank you.

Purchase Order not created for a Shopping Cart

We have a few Shopping Carts created in SRM which did not transmit as PO to our backend R/3 system. This happened because our R/3 system went down for a couple of hours and the Shopping Carts were created during this time. We tried to submit these Shopping Carts through the Application monitor later and the SRM system gave a message "Processed Successfully". However, POs for these Shopping Carts were not created and the Shopping Carts have a status of "Item in transfer process".
The Shopping Carts have already got a PO number assigned to them through the SRM system. However these PO's have not been created in the backend R/3 system
We are struggling to find the failed RFC calls with the help of BASIS so that we can possibly reprocess them. Alternatively we are also looking for a way to retrigger the PO creation for these Shopping Carts.
I need ideas to resolve this issue.
Many thanks in advance.
Susmit

Not sure if you received an answer or not, but this is what we have had to do in the past:
1. Run BBP_PD for the shopping cart to see what the purchase requisition number will be on the backend system. The requisition number will still be provided even if it fails to transfer to the backend.
2. Run FM BBP_PD_SC_RESUBMIT. The object key field will be the requisition number; the object ID field will be the shopping cart number.
Hope this helps.
Monique Stephens

Set user Defined Status in the Shopping Cart

Hello,
I am facing problem while Setting user defined Status in the shopping cart. Below are the steps which I have followed.
1. I have created Status profile via Transaction 'BS02' and also created the Status 'On Hold' with Status number 'Exxxxx'.
2. Entry of this external status is also created in the table TJ30.
3. Also I tried assigning this Status profile in Transaction type for "BUS2121".
After making the above configuration for the new User defined status I have used below function module in my program.
I am using FM "CRM_STATUS_CHANGE_EXTERN" to set the User defined status in the shopping cart.
CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN'
    EXPORTING
      objnr                    = ls_header-guid
      user_status          = lv_stat
    IMPORTING
      stonr                    = lv_stonr
After this FM I am also using "COMMIT WORK AND WAIT ".
But still my Status is not updated in the Shopping Cart.
Expert please suggest if some one has work in this scenario.
Best Regards,
Chirag Shah

Hi Chirag,
try to initialize Status schema before update.
CALL FUNCTION 'CRM_STATUS_OBJECT_CREATE'
     EXPORTING
       objnr                        = ls_header-guid
       obtyp                        = 'SCH'
       stsma                        = 'ZHOLD'
     EXCEPTIONS
       obtyp_invalid                = 1
       status_object_already_exists = 2
       stsma_invalid                = 3
       stsma_obtyp_invalid          = 4
       error_ocurred                = 5
       OTHERS                       = 6.
Regards
K

Manual created PO not showing up in the shopping cart for non-catalog scena

In non-catalog scenario within SRM, the shopping cart shows the purchase requisition and not the manual created PO after
running the program BBP_GET_STATUS_2. Do I need to run the program CLEAN_REQREQ_UP to retrieve the manual created PO on ECC 6.0 after BBP_GET_STATUS_2? What is the selection criteria for both of these programs?
Thanks
Chris Htizke

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Company code not showing in the shopping cart list

Similar Messages

Maybe you are looking for