Company Code wise Restricted Access to OB52

Hi there,
We have a single instance of SAP ECC6.0 where we have over 30 Company Codes.
We want to give access to OB52 to respective Controllers with a restriction that No Controller should be able to View or Change other Company Code's Posting Periods.
I am sure there is a way to control this view / change.
Can someone please advise?
Many Thanks
Rob

Guys thanks for your reply, but it seems I need to elaborate my question.
My point is the Person from X company code should NOT be able to even View the Other Company code's PP Variant.
I think it is possible thru some small Customisation.  I am not very sure about it.
Thanks.

Similar Messages

  • Total records in IT0000 company code wise - SE16N

    Hello All,
    I need to check the total number of records in IT0000 for employees belonging to a particular company codes or personnel area. But there shouldn't be any duplicate entry for a personnel number in the total records.
    In SE16N I am able to get an entire list but not company code wise. Is there any way I can generate the  total no records in each infotype, on the basis of company code or personnel areas?
    Regards,
    Ally

    1 - If you have activated Complementary Measures, you should look at table PA0302 instead of table PA0000.
    2 - As mentioned by Pedro, se16n will not allow you to get what you require in a single step.  An Ad Hoc Query could probably allow you to create the report you want.
    3 - Should you be able to get lists of employee numbers "on the basis of company code or personnel areas" (possibly using se16n to look at table PA0001), then you could use those lists to explore the different infotypes (tables PA0000, PA0002, PA0006, etc...) using se16n, but unless you restrict the output to the records with End Date = 31.12.9999 , you will end up with many records for each employee.

  • F.01 Balance Sheet-Report to see in company code wise

    Hi Experts
    Goodevening
    We are recently upgraded to ECC.6 version of SAP.
    The issue is, when we use Tcode F.01 relating to Balance Sheet Report it is giving the result in Business Area Wise of all the assets and liabilities.
    Is there any possiblility to see the report in company code wise and not the business area wise. since the same asset is displayed in different business area wise.
    eg.,
    21100/1011004  Gross Block - Intangible assets  647,080.00
    21100/1011004 Gross Block - Intangible assets    22,048.00
    21100/1011004 Gross Block - Intangible assets  2,847,283.25
    21100/1011004 Gross Block - Intangible assets 92,040.00 21100/1011005 Gross Block - Plant And Machin75,258,226.67 21100/1011005 Gross Block - Plant And Machin   216,968.87     
              the problem is like above
    now we want to see the report in lumsum, without business area wise.
    pls suggest me how to get the report
    thanks in advance
    warm regards
    kishore

    Dear Kishore,
    While executing in F.01 give all parameters without Business Area and Execute
    Apart from that if you need to additional thing go through dynamic selection in F.01.
    Assign point.........thanks in Advance.
    Rgds
    Madhuri

  • Vendor list by company code wise with Acoount group..?

    Dear all
      Can anybody expalin me how to get a report on vendors list by company codes wise with account group...
    1.List of vendors company codes wise
    2.List of vendors company codes wise with account group wise.
    Thanks
    sap-mm

    1.List of vendors company codes wise
    SAP Easy accessSAP Menu-accounting-financial accounting-vendors-information system-reports for account payable accounting-master data-S_ALR_87012086-VENDOR LIST
    2.List of vendors company codes wise with account group wise
    MKVZ
    Regards,
    Indranil

  • To view the company code wise cost and profit centers

    hi all,
    how to know the company code wise cost centers and profit centers? and what is the transactin codes for this?
    Regards,
    Soma

    Hi Soma,
    Could you try Table-->CSKS. I believe it will give you the complete list of Cost Centers and the default Profit Centers along with Company Code info.
    Regards
    Srinivas

  • Company code wise material with quantity table

    Hi
    I need Table for company code wise material with quantity to check 2009 stock which is issued.
    thanks
    Edited by: pandu123 on Aug 17, 2011 1:21 AM

    Hi,
    There is no table which shows  direct relation between company code and plant, you will have to arrive at the assignment of the plants to the company code.
    But you can either write a query/ report to show this relation and a report with this relation and quanity will have performance issues if you are checking for huge data.
    You can refer to the query and check the quantity in the standard reports.

  • Company Code wise message processing in Service Desk Solman 4.0

    Hi Guru's,
                     We are implementing Solution Manager 4.0 service desk with SP 15.We have got a scenario like our branches are in dubai , USA and Nepal. All these locations have multiple company codes. So our company requirement is to handle the message company code wise.
                                      For example if the message creator is from company code 1000 then the message should go to support team belonging to  same company code 1000. Is it possible to create a rule in PFAC with container company code to achievthis or is there any other method ? If creation of container is possible with company code how does the system get the company code details from Business Partner?
    Please give light into this issue.
    Best Regards,
    Sanju

    Mohammed,
    Could you please help me as to how did u go about it.
    I am having the same issue right now.
    Deepak

  • GR Company code wise Number Range

    Dear All,
    I want to know is it possible to maintain material and accounting document different number range Company Code wise?
    If it is so, then explain.
    Suppose Company Code 1000 -
    No range 5000000000
    & Company Code 2000---- No range  6000000000
    Thanks \
    Akshay

    Hi,
    upto my knowledge number ranges are independent of company codes. even though if you have created new document types and assigned to transaction codes these tcodes will worl  independent of company code .   so its not possible to have material documents on company code wise (Material document number ranges will be on  client level)
    regards
    suleman

  • Maintain company code wise Exchange rate in SAP

    Dear SAP Experts,
    Is there any additional configuration to maintain company code wise Exchange rates in SAP?
    Awaiting for your valuable inputs......
    Thanks
    Madhusudhan.B

    Hi,
    Exchange rate table is not company code dependent. You can maintain, though, different exchange rate types.
    Regards,
    Eli

  • GR Number range company code wise

    Hi,
    Can we do the enhancement/ user Exit / Badi for yearly GR Number range with repect to company code wise ?
    If yes then please provide the details how we can move further.
    Regards
    Rahul

    Hello,
    Company code specific number range for Material documents not possible because, The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change
    the number range intervals or you can allocate transaction/event types to
    new groups.
    Inshort, All company code will be using the same transaction event key so it will not be possible to have different number range for material docuement based on company code.
    Regards
    Mahesh Naik
    Edit by: Mahesh Naik 19.01.2011 2.08PM

  • Default document type for F-28 per company code wise.

    Hi SAP Experts
    My client wants to default document types per company code wise for F-28.
    As per my knowledge in OBU1 is cross client and OBZO is accepting only customer invoice and credit memo but not customer payment.
    Please help with possible ideas to solve this issue, including any idea relates to substitution also. Your help is appreciated.
    Thanks in advance
    Prathima

    Hi Prathima,
    As mouri said it can be done only by Substitutions
    Since OBZO is only for enjoy transactions
    I have verified the notes aslo but there is no possibility for F-28 by company codes
    Better you can use
    Prerequisite
    SYST-TCODE = F-28
    Substitution
    use Exit
    Inside exit you need fetch the document type as per the companycode
    to achieve this you need define one ztable with company code and document type columns
    Thanks
    Vishnu

  • Data will be load to data target  by company code wise .

    Hi,
    I have a requirement,"The data will be load to data target(Info Cube)by company code wise .
    so any one can provide me the ABAP code.
    Regards,
    Venkata Sharma.

    Hi Sharma,
    There is no problem you can do it in R/3 and also in Transfer rules.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • How can we restrict Cost Center Company Code wise in Equiment Master (IE01)

    Hello Experts,
    Here is one requirement is to restrict cost center in equiment master (IE01) However SAP System is behaving as per SAP Standard function.
    Please see screen shot to understnad better my requirement.
    I want to pass relevant cost center in equipment master which lies in relavant company code. Like if company code is 1000 in equipment master then only 1000 company code cost center should be enter and if user enterd any other company code cost center then SAP System should show error message.
    While in current in SAP Standard functionality is to show just warning message and allow entering cost center whether it is from different company code.
    Like in below screen it showing error only if Cost center is from different company code. It should be not allowed to enter other company code cost center.
    Please guide how to solve this issue.
    Message was edited by: Inderjeet Pal

    Try this code in the include ZXEQMU02 of Enhancement IEQM0003 to achieve the desired check.
    DATA:V_BUKRS TYPE ILOA-BUKRS.
    CLEAR V_BUKRS.
    SELECT SINGLE BUKRS FROM CSKS INTO V_BUKRS
       WHERE KOSTL = DATA_ILOA-KOSTL.
    IF V_BUKRS IS INITIAL.
       MESSAGE: 'Cost Center and Company code do not match' TYPE 'I'.
       RAISE POSTING_NOT_ALLOWED.
    ENDIF.
    Consult your ABAPer in case any finetuning of the code is required.
    Jogeswara Rao K

  • Cash Inflows and Outflows- company code wise, project wise etc.

    Hi Gurus,
    Client's requirement says they need cash inflows and cash outflows related to a company code, project wise etc. for a specified period.
    What needs to be done for this requirement? Do we have to implement Cash Management and liquidity forecasting module to fulfill this requirement???
    Please revert asap.
    Thank You

    Hi
    You need to setup the cash journal configuration where cash inflows and outflows will be recorded.
    The path is as follows:
    SPRO>Financial Accounting>Bank Accounting>Business Transactions>Cash Journal
    Hope it will solve your problem.
    Regards
    Tapan

  • Need to move data only by company code wise to another client

    Hi All,
    I need to move data from DEV client to one of PRD clients.
    There are two scenarios:
    1. The scenario is we have 3 company codes in DEV but need to move data of only 1 company code (that too customizing data).
    2. We want to move data, date wise also (i mean from 1 JAN to till date).
    Is there any possibility in SAP to do this?
    Thanks
    Disha

    "As I said above, production system should not be build from quality/development system in any way either by client copy or ALE or any other means."
    @Sunny
    Not necessarilly correct in all cases. Purely depends on what data is being discussed here. ALso depends on how Business processes have been defined. In lot of projects master data like GL Accounts,Cost Centers,Profit Centers etc is created in Development and ALE'D to production. You can also move a lot of data via transports (cutomizing). Depends on what data is being discussed. Transaction data ..yes you would never do that . But customzing and master data you can; provided you have fool proof processes in place and have a good understanding of how ALE works for the concerned data !
    Coming back to the question :
    Yes you can do it. Never do it for transactional data. A lot of garbage might have been created. Master data if you are really happy with the quality do it via ALE (but do it first on a test box) .  Make sure however that all the relevant customzing is in place.  Sequence is import. What got created in DEV first must go to prod first or else you would have errors which of course can be solved but then why take the pain. Involve your FI-CO guys and Business process owners before you do it. Be a bit careful with chart of accounts !
    As I said try it on a test environment first..
    And why are people suggesting to use TDMS when it was mentioned that only customzing data is involved! Why did SAP create CTS then if customzing has to be moved via TDMS !! Or is the old point frenzy back again !
    Regards.
    Ruchit Khushu

Maybe you are looking for