Comparing to working areas in order to find the different.

hi
i am selecting the current row of an employee from infotype 1 to wa_1 and his previous row to wa_2.
is the an easy way to compare between the two wa ( wa_1 to wa_2 ) insted of comparing each column in wa_1 to the same column in wa_2 ?
i need to find the different between the two row .
thanks
Ami

perform some ASSIGN to components of the two areas and compare those in a DO/ENDDO loop. Look at [Assigning Components of Structures to a Field Symbol|http://help.sap.com/erp2005_ehp_04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/frameset.htm]
Code should look like
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE wa1 to <fs1>
IF SY-SUBRC NE 0. " no more component
EXIT.
ENDIF.
ASSIGN COMPONENT sy-index OF STRUCTURE wa2 to <fs2>
IF <fs1> NE <fs2>.
* report delta
ENDIF.
ENDDO.
Regards,
Raymond

Similar Messages

Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

Not sure why that was unchecked but good to know!
Apple's new default (since at least a couple of OS releases back) is to have it off so OS X matches the behavior of an iPhone or iPad.
I almost never need a scroll bar, and when I do, I just move over to the edge of the window when scrolling and a larger scroll bar appears.
Yes, for the most part, users don't really need the scroll bar. That's what the scroll wheel on almost all mice is for. Saves the trip over to bar to physically grab and move it. But, I do like it on all the time regardless. That way (especially with a long article) I can just take a quick glance over to the bar to see about where I am on the page (a third of the way down? halfway?). Otherwise, I have to move the page just to make it appear to give me the same information.

I need to go back to Firefox 3.5-3.6 because 90% of my extension do not work. Where can I find the download to Firefox 3.5-3.6? Thank you for the link.

I need to go back to Firefox 3.5-3.6 because 90% of my extension do not work. Where can I find the download to Firefox 3.5-3.6? Thank you for the link.

You are a "life saver". Thank you very much.

Protein powders are one, creatine will be the different.

Best Bodybuilding Cutting On Diet
One thing you shouldn't do is confuse supplements. This is a frequent myth that many people create. The stark reality is that products have nothing regarding steroids in any way. Infact, many supplements are only and natural support not and to improve your
bodybuilding teaching influence any hormone levels.
By selecting the Best Bodybuilding Ultimate Muscle Black Edition Supplements for you, you will be cost money. It's a great deal of neglect and strike. Don't consider your friends' word because of it. You'll need to get some items and find out everything
you like yourself. You will find not many certainties in the product organization. There are likely only a few on the market. Protein powders are one, creatine will be the different. Those are two types of products that benefit almost everybody. Creatine will
probably be included in just about every bodybuilding product you can find. Creatine are available alone or it can be included in pre workout products as well as in certain meats.
http://alphajackedhelp.com/ultimate-muscle-black-edition/

Apple is not here.
There are only users here like yourself.
We can do nothing at all about any devices on you AppleID.

I recently installed vista to my mac (32bit)...my headphones are not working. I can't find the 3.5mm jack that apple suggests using. I have tried installing/unistalling several different audio drivers. Does anyone know how to solve this problem?

I recently installed vista to my mac (32bit). My headphones are not working on it. I could not find the "3.5mm jack" that apple suggests to "solve" this issue. And I have tried installing/uninstalling audio drivers. Can anyone help?

you don't need several drivers, you just need the audio driver for your Mac, which you didn't list, but would be Cirrus or RealTek.
Along with uninstalling programs, go to Dev Manager and uninstall driver, or even rollback driver.
some people have trouble installing or finding driver that will install.

IPad 2 wifi not working. Was working fine, now won't find the network. Any suggestions?

Help! Bought an iPad 2 for my mother, brought it to Scotland (from Chicago); initially worked fine. Wifi suddenly stopped working. Wn't find the network. My iPad 2 has no problems. Reset the network settings, did a hard restart, reset all settings, rebooted the router. Nothing's working. I'm returning to the U.S. In four days. Any help would be most appreciated.

Patrick-
Did your "hard restart" involve holding both buttons until the Apple logo appeared?
Are you sure that Airplane Mode is OFF?
The solution may be to swap iPads and leave the good one with your Mother. If you erase all content and settings on both, you can restore the good one from your Mother's computer.
When you get home you can do the same with the problem iPad and your computer. If you haven't sorted it out by then, take it to the Apple Store Genius.
Fred

Safari isn't working properly, says it cannot find the Internet plug-in

After I installed Mozilla Firefox, Safari is not working properly. It says:
Safari cannot find the Internet plug-in
The page “Now Casting - The Best in Guides & Labels” has content of MIME type “application/x-shockwave-flash”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed.
I tried to install the flasf player and a web page appears saying that it is installed but obviously isn't.
Please tell me what is wrong so I can use my Safari.
Thank you.

Hi ivoniko,
Welcome to Apple Discussions-!!
In Safari Look in you In Safari task Bar >Help>down to Installed Plug-ins>
See if you have what you need there, if not try this article from Users Tips:
Vinko - ksafari: Suggested Safari Plug-ins
http://discussions.apple.com/thread.jspa?threadID=121772
good luck hope this helps, let us know.
Eme :~{)
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

IWeb works, but I can't find the domain file!!!!

OK - this one has had me stumped for a few days now... I have iWeb (vs. 1.1.2 - from the '06 iLife). I need to find the domain file. It isn't in the home/library/app. support/iWeb folder. I didn't move it. I searched for it using command-F and using spotlight on my computer.
iWeb is to reset and start from scratch if there isn't a domain file on your hard drive. So I know it's there somewhere (at least, I think it is?). My site is there. I can publish. I can make changes, however I can't find the domain file to make a back up of it. I don't think that I made it invisible - could I have somehow done that? And if so, is it possible to find it? I believ the program only works if the file is named "domain" so I don't think that I could have accidentally renamed it.
Is there someone out there who can help me? I don't want to have to start from scratch and rebuild the websites.
Thanks for your input!

This is from Multisite's Technical Page:
Technical Information
While you don’t need to understand how data is stored to use Multisite for iWeb it can be helpful occasionally to understand what is going on behind the scenes. At a nuts and bolts level Multisite for iWeb stores all of its sites in your home folder’s Documents folder in a single package (which is really a fancy folder dressed up to look like a file) called “Multisite for iWeb Data.mfi.”
You can open that package like this.
Once you get your domain file straightened out I'd definitely get Varkgirl's Automator application to make frequent backups of that file. You can get it Varkgirl's iWeb Tips and Tricks site.

Folders permissions are changing. Cannot find the cause.

I am running multiple Windows server 2008 R2. And the clients are running either Windows XP SP3 or Windows 7 SP1.
I have a folder to hold all of the users home folders. D:\Users\Staff In this folder are all of the users folders. Each server has a similar folder structure.
During the day folder User1 will change its permissions and lock out the administrators. After fixing the issue, it will happen again. It may be on User1 again or it may be different users. And it can be multiple users. The users do not have the ability
to change permissions.
On the local server I turned on "Audit object access". When the policies refresh, the settings are turned off. So I have been unsuccessful in finding the cause. I have checked the Group Policies and nothing is turning off Audit object access. It
seems as if the change in the permissions on the folders happens at the same time as Audit object access gets cleared.
If I create a GPO with Audit object access turned on, the settings are locked and turned off but the winning GPO is the GPO turned on.
We started filtering out the desktop.ini file because it was making the folders all look like My Documents.
We started noticing this issue over the summer. I do not know how long it has been happening.
I have been trying to catch the offending process with Audit object access, AccessEnum, EventViewer, and ProcMon.
Any help is appreciated.
Charles

Hi,
I think we may not able to change that option directly once it is applied the change you make on Folder Redirection policy may not be refreshed to clients even it displayed as changed on server side.
Thus if issue still exists, test to create a new policy to replace the old one. You can create a new policy in a new OU and move users into the new OU, or create a new policy which "direct folders to new location" and folder redirection folders
will be moved to a new place once a user logged on.
If you have any feedback on our support, please send to [email protected]

My ipod mini si not working and I can't find the answer.

My ipod mini is not working. I have done all the R things. It won't switch on unless I toggle the hold key, once switched on it asks me to choose a language but pressing the select button does nothing. Can it be saved or should I throw it in a heap with my Dyson vacuum?????????

It's no longer under warranty? Rather than throw it away, there are 3rd party repair site here in the UK (iPod Doctor is one).
Might be worth a try because it seems like a hardware issue rather than software.

E2000 works wired to router, but wireless doesn't work? Mobile devices not finding the wi-fi...!!!

Hi, I have had the E2000 now for about 3 months and everything has been fine up until Christmas Day. All of a sudden the wireless portion isnt functioning. My smartphone shows intermittent broadcast of the wi-fi, it will be there for a second and the next its gone. My desktop works just fine connected directly to it.
So far, I have done the reset on the back, uninstalled the software and reinstalled, reconfigured everything and it still is the same story.
I know it just isnt my phone because I have another smartphone and an e-book reader that also is not finding the wi-fi portion. I just cannot seem to figure out why it is not working and its making me crazy....
ANY IDEAS?? Thanks.

it is possible that you may be experiencing wireless interference in your location.
try and change the channel in your router, follow the procedure here

How to find the Different entries of the characters.

HI Gurus,
i have two characters in the Cube, for these two characters text is same for some records and different for some records. My requirement i need to find out the records whose text values are different for these two characters. I need to find out these records in the report level. Please guide me the way to find out a solution for this issue.
Thank you very much in advance
James
Message was edited by:
james winslet

Hi ,
I want the Report like this.
TransactionID--Usersite-Custsales
10001--newyork1newyork2
10002--newyork3newyork5.
10003--newyork6newyork6.
In above report I Do not want the 3rd row because in that one the two characteristics text's are equal.
I want the final report as
TransactionID--Usersite-Custsales
10001--newyork1newyork2
10002--newyork3newyork5.
Thanks,
James

HT1688 the Apple Maps app won't locate an address, the address is a medical center in gainesville, fl 4037 NW 86th Terrace 32606. i had to google map it in order to find the location... please update addresses on your Maps app... how often are the Maps up

How often does Apple Maps update address locations?? there is an address in Gainesville, Fl it is a health facility as it was priority to locate, the address is 4037 NW 86th Terr, 32606. I had to use my google maps app... it then took me to the correct address and located it no problem. please update at least this address so people in need of health care don't go through the same thing I had to endure...

The satellite imagery on Apple Maps shows that whole area as undeveloped woods. Google shows a brand new building with the nearby streets.
Use the "Report a Problem" button on the Maps to inform Apple of the required update.

What do you do in a query in order to find the 1st day of last month ?

i use a
select trunc(trunc(sysdate,'mon')-1,'mon') from dual;
what about you guys ?

Hi,
Of all the solutions, I like yours
add_months(trunc(sysdate,'mm'),-1)or doing the operations in the opposite order, like Sentinel did
trunc(add_months(sysdate,-1),'mm')best, mainly because:
(1) it's easy to read and understand
(2) it's easy to modify (in case you want the first day from three months ago, or six months in the future)
By the way, after you post something on this forum, if you see that you've made a mistake, you can correct it. Click on the second icon to the left of "Reply". (What is that: a hand holding a pencil?) You don't need to post a second message.

Work area(wa) 's field on the screen

Hi all,
I have put the wa's fields on screen to make possible data entry and then save this data into db table.
However what I want is that, when the user has hit enter key, the cursor should go to the next field or stop at current field, what happens in mine is that it goes to the first input area.
How can I realize this requirement?
Thanks.

Hi,
Use SET CURSOR to that field.
EX.
DATA f(5) TYPE C VALUE 'MODUS'.
DATA MODUS(10) TYPE C VALUE '1234567890'.
SET CURSOR FIELD F.
or
SET CURSOR FIELD 'MODUS'.
Regards,
Prashant

Comparing to working areas in order to find the different.

Similar Messages

Maybe you are looking for