Complex problems synching with Tiger 1.4.3 upgrade

After finally getting the courage to upgrade to Tiger on my iMac G4, I do have problems synching.
I have a Zire 21 Palm. Nothing worked so I upgraded the Palm Desktop Software to 4.2.1 as required. Went to HotSync Conduit settings and enabled HotSynch for this Palm device. Opened iSynch, went through the enable Palm synching. Get the message to finish setting up your Palm OS device you need to select the HotSynch conduit in HotSynch Manager. (But I thought I already did that.) Anyway, I press the hot button, after a while it says connecting to Palm device, but the job never stops. I have to cancel, and no data has been transferred.
I ALSO have an iPod. I explore this, I plug the iPod in after upgrading the iPod software as suggested. I set the contacts and calendars panel to synchronize (and to update podcasts, too), Now iTunes keeps telling me it's updating my calendar and contact information. It tells me this for over an hour. I have to go some where, I cancel, when I come back, it goes back to its labor. I don't think it should take this long.
I also think the .Mac synching isn't working quite right, but I'll settle for a solution to the other problems.
Bottom line, I still have no way to carry my calendar around with me. Help is needed.

Ok, here is a copy of the iSynch log. I had never looked at this before.
11:15:46 AM Connecting to Jim Andris
11:15:46 AM Device "Jim Andris" connected
11:22:09 AM Warning Device "Jim Andris" synchronization cancelled
You suggest reconfigure iSync so that calendars and tasks are turned off - and contacts are turned on - without making any other configuration changes
I went in and changed all other conduits in the Hotsync Manager to Do Nothing EXCEPT FOR iSync conduit, which is enabled.
Then I unchecked the Calendars and checked Contacts on the Zire 21 menu on the iSync panel. I pressed the hot button on the Zire at 9:23 am. It said “Connecting Jim Andris” (which is my user id) Then it switched to just Connecting… It is just spinning with about a tenth of the bar in blue.
Later (10:15 am)
In the Zire 21 log it says
Last HotSync operation
11/16/05 9:29 am
iSync conduit synchronization failed.
Here is the message in the Desktop Palm Log
HotSync 3.2 started 11/16/05 9:22:46 AM
Local Synchronization
Install did nothing
iSync Conduit starting 11/16/05 9:22:48 AM
Timeout waiting for Sync Engine, exiting 11/16/05 9:29:07 AM
iSync Conduit: received NULL message, disconnecting... 11/16/05 9:29:07 AM
iSync Conduit synchronization failed
“iSync Conduit” failed (error = #-1)
Voice Memo did nothing
SplashShopper did nothing
SplashPhoto did nothing
SplashMoney did nothing
SplashID did nothing
Media did nothing
Note Pad did nothing
Memos did nothing
Memo Pad did nothing
Install did nothing
Backup did nothing
Last sync time and PC ID updated on handheld
HotSync Complete 11/16/05 9:29:09 AM
Here is the message in the iSync log
Wednesday, November 16, 2005 9:22:50 AM CST
9:22:50 AM Connecting to Jim Andris
9:22:50 AM Device "Jim Andris" connected
9:30:00 AM Receiving changes from "Jim Andris".
9:30:09 AM "Jim Andris" finished receiving changes
9:30:12 AM "Jim Andris" Processing changes...
9:30:12 AM "Jim Andris" engine processing complete
9:30:12 AM Applying changes to "Jim Andris"
9:30:15 AM Device "Jim Andris" connected
9:30:15 AM Receiving changes from "Jim Andris".
9:30:15 AM "Jim Andris" Processing changes...
9:30:15 AM "Jim Andris" engine processing complete
9:30:15 AM Applying changes to "Jim Andris"
9:30:15 AM Device "Jim Andris" synchronization complete
9:22:50 AM Connecting to Jim Andris
9:22:50 AM Device "Jim Andris" connected
9:30:00 AM Receiving changes from "Jim Andris".
9:30:09 AM "Jim Andris" finished receiving changes
9:30:12 AM "Jim Andris" Processing changes...
9:30:12 AM "Jim Andris" engine processing complete
9:30:12 AM Applying changes to "Jim Andris"
9:30:15 AM Device "Jim Andris" connected
9:30:15 AM Receiving changes from "Jim Andris".
9:30:15 AM "Jim Andris" Processing changes...
9:30:15 AM "Jim Andris" engine processing complete
9:30:15 AM Applying changes to "Jim Andris"
9:30:15 AM Device "Jim Andris" synchronization complete

Similar Messages

Problems synching with Palm Tungsten T3

I am having problems synching with my Palm Tungsten T3 datebook to Outlook 2003. It was working up until about a week ago. When I try to synch, it works for a few items and then I get the error message Pilot connector "Unable to read application data". I click OK and then it finishes. Below is the information I get in my log:
HotSync operation started 07/29/08 15:21:15
OK Expense
OK Note Pad
OK Voice Memo
OK Photos
Palm handheld database could not be opened (4004).
Unable to communicate with Palm handheld (400D).
   -- Backing up db Bluetooth Trusted Devices to file C:\Program Files\Palm\PageT\Backup\Bluetooth_Trusted_Devices.PDB
   -- Backing up db Bluetooth Device Cache to file C:\Program Files\Palm\PageT\Backup\Bluetooth_Device_Cache.PDB
   -- Backing up db Saved Preferences to file C:\Program Files\Palm\PageT\Backup\Saved_Preferences.PRC
OK System
HotSync operation complete 07/29/08 15:22:20
I use Intellisync Desktop and Windows XP. I tried a soft reset with no luck.
Any help would be great!
Thanks!
Tammy
Post relates to: Tungsten T3

don't know if you can help. i have a t-3 and when i last synced it erased all of my calander on both the device and my palm desktop. the log said i had exceeded my file number and needed to erase some calander files and resynch. tried but to no avail. i can see folders in my palm program folder in windows i have calander backup data. but i cannot import them under the file options from palm desktop program. need some help please, i never knew before but do know now i should've backed up that data onto a cd or thumb drive.
Post relates to: Tungsten T3

MB Pro, with Tiger, which has since upgraded to Leopard - Install Discs?

My MacBook Pro had originally been installed with Tiger. I have since upgraded to Leopard.
Should I need to boot from my install discs, which install disc do I use? Will my Tiger install discs work with Leopard, or should I use my Leopard disc (retail version)?
Thank you!

{quote:title=Kappy wrote:}
Actually you would be better to install Leopard directly. You can reinstall pre-bundled software separately without installing Tiger. An Erase and Install of Leopard would be preferable to installing Tiger then upgrading to Leopard. Less chance of a problem.
Hi Kappy,
Some, at least, of the late 2007 MBP C2D 2.2 and 2.4 GHz MBPs (mine included) actually came with Tiger Installed, but with a "drop in" copy of Leopard enclosed in the box. From memory the version of Leopard included will only install if the original software is in place. (I'm not 100% certain of this, but I'll check) Not sure what Trisha's situation is, of course, but worth bearing in mind as a possible issue.
Cheers
Rod

Problem Synching with Google Calendar

Having difficulty syching 8900 with Google calendar. Downloaded google synch to phone. When I check the Calendar Properties it show Wireless Synchroniztion as "No". It won't let me change this.. When I try to synch. I get the message that says"Login failed, due to network problems, please check your settings" Service is with Tmobile. Not sure which settings are not right.

The calendar options should say no. It will only say "yes" is if you're on a BES. I think I had that error when I first started using Google Sync a while ago. I think I just uninstalled and reinstalled the program after getting that error a few times and then I was able to log in and setup the program
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Problems synching with a second computer

Hi,
I've searched the docs and forums but can find no help for the problem I am having synching my iPod with a second computer.
When I plug it in it recognises it but only calls it "E/:" and does nothing else. The iPod screen just continues to say "Do not disconnect".
Any ideas?
Thanks,
Ric

Thanks for your help folks, but after reviewing that document etc its not quite the same problem. The computer recognises the iPod as a mass storage device but doesn't show it in Windows Explorer. It does, however, show up in iTunes, but only as "E/:" (at home it comes up as "Ric's iPod") and cannot be updated.
It is shown as "Update Manually" but I thought that is what I wanted as I'm trying to sync with a second computer?
What I am trying to achieve is to be able to download the odd podcast or track while at work but more importantly to be able to upload my Nike+ data.
Thanks again in advance!!
Ric

Is anyone else having big problems synching with iTunes 11.1.3.8

Hi is anyone else getting the same problems that I get with iTunes 11.1.3.8?
iTunes is VERY slow to load. Then when I try to dowload updates it downloads the first update, then hangs saying "Processing File" It will stay like this until I restart the computer. Sometimes I get the Error Message: Err 3253.
If I try to close iTunes and then reopen it, it WILL NOT OPEN!
I have tried repairing itunes through the Control Panel.
And I have tried deleting and the reinstalling it.
Any help, advice etc gratefully accepted.
Merry Christmas to all.

Met,
Here's a few temporary work-arounds that may work for you, hopefully you don't have a HUGE amount of apps on your iTunes that need updating.
1.) Update all of the apps via your iPhone/iPad and then sync your device with your iTunes, that will update all the apps that you're unable to update via download on iTunes.
2.) If the apps aren't on your iPhone/iPad and you've got the room, redownload them to your iPhone/iPad and sync your device. That will update the apps you're unable to update via iTunes, you can delete them off your phone/pad when you're done updating them on your computer.
3.) Instead of "updating" the apps via the update section of iTunes, make note of what the app is, check that it's still available for download on the store (sometimes stuff gets pulled and you don't want to do this before you check) - once you've confirmed that the app is still available for download, instead of downloading it in the update section DELETE it (remove it entirely from your iTunes and send it to recycle) then RE-DOWNLOAD it fresh from the store, I've found that it's only the update section that hangs on processing, not the store section.
Hope those help, that's what I did because I'm compulsive about keeping my apps and software up to date.

Problem synching with MobileMe

I made a MobileMe gallery in iPhoto '09 on my iMac and synchronized with MobileMe. This worked fine and the gallery is available on line. Then I synchronized my Macbook Air and the gallery appears, but only about a third of the pictures are downloaded, the others just have a dotted white outline. I've tried re-synchronizing but with no improvement. Anyone know of a solution or seen this before? My other gallery's are all okay using the same method and I'm using OS-X 10.5.7 with all the latest updates applied.

I used to have that problem with mine and here is how I solved it. First, delete your contacts and calendars that are Mobile Me related on the iPhone. Next, create a unique contact on your phone that you don't have on your mobile me contacts, such as John Doe with a 111-111-1111 phone number. Next create a new contact that you didn't have on your mobile me calendar, such as "event: make mobile me work correctly from 12:00pm to 1:00pm." Now sync your phone with mobile me and when you hit sync it should give you the option to "merge contacts and calendars" or replace contacts and calendars. By clicking merge, this solved my problem of duplication. You can go back and delete the fake event and contact after merging. Hope this helps.

Problems Synching with Desktop Software & Outlook

I have the desktop software open and it recognizes my blackberry. However when I click the arrows for synch btwn outlook and the blackberry it pops up an error box with no message. When I click to the next screen it won't let me select an outlook profile. The Drop down box is empty. Any suggestions?
Thank you

Hi and Welcome to the Forums.
Very odd...no error message at all...in that case, all I can think to suggest is a totally clean start over...here's a procedure:
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported that there are more registry keys to remove than are discussed in that KB
Others have reported the use of a registry cleansing tool to also be helpful
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems synching with Nike + Server

After I end a workout, am I able to connect to the Nike server to transmit my workout data less than half of the time. The other times, I get an error message that the Nike server was unable to accept my data. This is totally glitchy! My iTunes is the most current available, and my iPod Nano is absolutely up to date.
I have tried creating a new Nike account and the same problems persist. Has anyone else experienced this and if so, how do I fix it? I'm frustrated!!!

Sounds like a problem with their website. You should contact them aboout it.
CG

Problem with tiger to snow leopard upgrade

Hi,
I wanted to upgrade from Tiger to Snow Leopard and bought a retail 10.6 Snow Leopard install disc MC223Z/A. on the box. 2Z691-6428-A on the disc.
It would not let me install it unless I erased and partitioned the destination disc thus losing my settings and preferences like the old Archive and Install as it suggested in the article mentioned below..
I tried this after reading this article
http://www.computerworld.com/s/article/9137147/Upgrading_to_Apple_s_Snow_Leopard _OS_What_you_need_to_know.
I presume now that the article was written for upgrading from Leopard and not Tiger.
Perhaps I missed something when I tried.
Any ideas from the experts.
Regards from UK,
Alan

Hmmm,
10.4.10
# Disk 1: 2Z691-6089-A
# Disc 2: 2Z691-6113-A
Compatibility
17" iMac (Late 2006 CD) Intel Core 2 Duo 1.83GHz, Mac Pro Intel Xeon 5100 Series Dual Processor 2.0GHz, 2.66GHz, 3.0GHz, Mac Pro 8-Core Intel Xeon 5300 Series Quad 3.0GHz, 13" MacBook (Late2006) Intel Core 2 Duo 1.83GHz, 2.0GHz, 13" MacBook (Mid 2007) Intel Core 2 Duo 2.0GHz, 2.16GHz, Mac Mini (Mid 2007) Intel Core 2 Duo 1.83GHz, 2.0GHz
Machine ID: iMac5,2, MacPro1,1, MacPro2,1, MacBook2,1, Macmini2,1
http://www.welovemacs.com/2z6916089a.html
Could you have installed some Server update in the past?

IPhone won't synch with exchange server after ios5 upgrade

I upgraded to ios5 last night. I did not get the 3002 error however after reboot it asked me about use of location services, etc and then later about the "find my iphone" feature - at this point the phone got stuck - no matter which selection I made when I picked the Done button nothing happened. I had to do a reset and it came back up OK (not sure what the status is of Find My Iphone feature - but more pressing is the fact that I can't connect to our exchange server. After putting in my credentials it seems to connect and the name of the mail server gets filled in, but then in the next step it says "Unable to verify account information" and its game over.
Any thoughts if this is a phone setting or a server setting? I think we are using Exchange 2003.
Thanks - Jack Jolly
CAD Admin, URS Corp

Not sure what happened - but its working now. Our IT guys may have done something on the server side. If I can get any details I will post them. Look forward to picking up additional tips from this forum!

Dazzle Hollywood DV Bridge compatible with Tiger?

Quick question for Dazzle users ... does the DV Bridge work with Tiger? I'm upgrading to a new iMac and I've read a couple of posts whereby some people have been unsuccessful in using the DV Bridge with Tiger.
If any Dazzle users are currently ABLE to use the DV Bridge with iMovie 5 and/or Tiger, would you please respond to this post.
Thanks for your time.
Take care & happy holidays.
Brent

Adam:
About a year ago, when I was still on OS 10.3.x and QT 6.x, I started having a minor glitch with my Dazzle, in that it refused to recognize any device feeding through the Dazzle unless I also had a digital camcorder hooked up through a FW and turned on.
This still happens intermittently (for no discernible reason), so I've learned to always have the camcorder connected so I can quickly turn it on if need be.
Tom
PowerMac G5, dual 2.5GHz; iBook G4 1.33GHz Mac OS X (10.4.4) 1.5GB RAM, 200GB LaCie FW HD, 16x LaCie LightScribe

Problem to synch with Nokia 6600

Hi all
I have 10.3.9 on my G5 and I syncronize my (old) Nokia 6600 (V 3.42.1) with isync, without any problem.
Now, I bot a second 6600 and there is the firmware V 5.27.0 installed. I am not able to synch with that phone.
Any idea if it would work when I update to tiger and the new isync, or do I run into other problems?
TIA
kk
G5 Mac OS X (10.3.9)

I have the same problem ,
tried using same application in 6600 and sony erricssion ,
works fine in sony but not in 6600 ,
i think there is more to fear..
the itemcommands also doesn't work
so only way is to add commands at form level ! it's strange

Problems synching iPhone 3Gs with Address Book and Calender

I have an iPhone 3Gs and have begun to notice that information is not being synched between Calender and the phone and Address Book and the phone. I now also have duplicate contacts for all contacts that were in my orginal iPhone before I upgraded. I suspect it has something to do with mobileme (which I don't subscribe to) and I have tried all the various synch options in iTunes. I know people have been having the problem and have solved theirs with the help of mobileme. How can I solve it without subscribing?

Yes I have a similar problem.
I lost all my contacts (today 23rd Mat 2011) on my 3G iPhone and the Address Book on my Mac Pro also.
The contacts in my MS Outlook were intact I run Outlook:Mac 2011.
They have only just fixed the issue with the Calendar in this version 2 weeks ago an MS issue.
I plugged in the iPhone last night to charge and synch and this morming the phone had no contacts and I had lost all the address Book I had some group headings (greyed out)
It's almost like a plot to get Outlook users frustrated and make them switch but, Outlook is too good.
Outlook:mac 2011 contacts does not synch with Mac address book

HT1296 how do I unsynch my iPhone with one computer in order to resynch it with another? could part of my problem be that I initially synched with the first computer under one apple ID then created a new ID so that the two different computers are recogniz

I,m having trouble unsynching my phone from one computer in order to synch it with a new one. I beleive that part of the problem is that I originally set the phone up with one Apple ID then changed to a new ID. Any thoughts on how to work around this? If not how do I erase the new Apple ID in order to make the switch from one computer to the other? this problem is also affecting my ability to make full use of some apps.

Switching Apple IDs and trying to synch with two computers is the problem.
The apps you purchase or download are always tied to the Apple ID that was used to purchase them.
Content synced from one computer will be lost when syncing to a different computer.
I suggest you make sure you have a backup of all the music, photos, and documents on the computer you plan to sync with from now on. Once you have done that you can use the Settings app to erase your device and start over.
Settings > General > Reset > Reset all Settings
Settings > General > Reset > Erase all Content and Settings
Then setup your device again as if it was new. Plan to use one and only one Apple ID. You can then sync with your computer which should be using that same Apple ID.
Pan to download all apps again. Apps that were purchased with the Apple ID you are now using can be downloaded for free. Apps that were purchased using the old Apple ID will have to be purchased again.
Obviously all free apps can be downloaded again without charge.

Complex problems synching with Tiger 1.4.3 upgrade

Similar Messages

Maybe you are looking for