Component gs_jobmonitor: not possible to lock runtime repository

Hi,
in bsp_wd_cmpwb for the enhanced component gs_jobmonitor I am not able to lock the runtime repository and I get the error:
Not possible to lock runtime repository
Message no. BSP_WD_TOOLS216
Diagnosis
You can only lock and edit runtime repositories that are saved statically in a BSP page. This means that the page may not contain dynamic elements, such as ABAP source code or page includes. Dynamic BSP pages must be loaded via HTTP and cannot be locked or edited.
It is also not possible to lock or edit runtime repositories that are only referenced as a URL or that are in the MIME repository.
System Response
Lock not possible. You remain in display mode.
How can I solve this problem? I have already seen threads in http://forums.sdn.sap.com/thread.jspa?threadID=1948329 and sap notes like 1437186: is this the case and do I have to modify the standard Repository.xml in se80? (I have upgraded my system and I need to edit the repository in order to solve inconsistencies between the standard repository and the enhanced repository).
Thanks,
Laura.

We have modified in se80 the Repository.xml file for BSP Application ZGS_JOBMONITOR deleting all <% %> lines (also <%-- --%>), then we were able to lock the enhanced repository for component GS_JOBMONITOR in BSP_WD_CMPWB and make our adjustments. At the end we have restored the abap statements again in Repository.xml.
Thanks for your help.
Laura.

Similar Messages

Error in BSP runtime repository: "Not possible to lock runtime repository"

Hi,
When I tried to change runtime repository of a component BT120H_CPL, in BSP component workbench, I am getting the following error: (The component is already enhanced one only).
Not possible to lock runtime repository
Message no. BSP_WD_TOOLS216
Diagnosis
You can only lock and edit runtime repositories that are saved statically in a BSP page. This means that the page may not contain dynamic elements, such as ABAP source code or page includes. Dynamic BSP pages must be loaded via HTTP and cannot be locked or edited.
It is also not possible to lock or edit runtime repositories that are only referenced as a URL or that are in the MIME repository.
System Response
Lock not possible. You remain in display mode.
Could you please help me out for the same.
Thanks,
Sandeep

Hi Sandeep,
There is another way of commenting the code as below:

This wouldn't cause any scripting comment. Generally we use <% %> type of comments if we want to comment more than 1 line at a time. But for repository we have to use code as I mentioned above for each line seperately.
I hope that resolves your query
Thanks,
Rohit

View YLOY102H_MSH/YSolCONconfMA is not defined in the runtime repository

Hi Gurus,
We have enhanced one LOY102H_MSH component and added various custome view in it.
After 3-4 months there is a requirement in which I need to add on custom view in the same component.
i added on custom view YSolCONconfMA and at the time of creation I have added two context node (Membership and MAGenAtt). I have tired without context node as well but same error message is coming as mentioned below.
Problem : 1 When I am double clicking and try to open the new created view it giving message "View YLOY102H_MSH/YSolCONconfMA is not defined in the runtime repository that was loaded"
2. these two context nodes are not coming with the new created view.
Any budy have have any idea.....
Best Regards,
Durga

Hi Durga,
You can cross check the created view in the YLOY102H_MSH. Check whether the context nodes are there
under the view.
In the used component, check in the repository if you have this interface view availabel under the
component usages.
Regards,
Leon

View zview is not defined in the runtime repository that was loaded.

Hi,
I created an enhancement for component BT111H_OPPT and created a view "ZVIEW" in it.When i clock on my ZVIEW i am getting the following message:
view zview is not defined in the runtime repository that was loaded.
What does that imply?
Isnt the view defined in the runtime repositry when we use the wizard to create it?
Thanks in Advance.
Regards
Shilpi

Hi Shilpi,
Did you add your view into the Viewset/Window in Repository Browser ?
Good Luck
Eli Steklov
Please Reward Points if it Helped

Process Component Assignment Not Possible

Hello,
i have created a process component within a process component interaction model. Unfortunately I'm not able to assign anything to the component. Hence it's lacking a namespace.
Are there any special prerequisits for assigning a namespace to a process component?
Thank you for any help in advance,
Heiko
see also: Does Model Configurator in ID works for ProComp Interaction model

Hi,
Just a quick thought:
If your order is having status CRTD or REL (but without any confirmations, goods issue, settlements) then you can use the Read PP Master Data (Order header - Functions - Read PP Master Data) & this will re-read your routing & BOM. But for this to work for you, the routing should be updated with the assignments.
So what you could do is start processing your order as late as possible, thereby you can re-read the BOM & Routing as the modifications take place.
But if this is not possible in your scenario, then i am not aware of a BAPI or a FM which adds components to different operations in production order, you might evaluate writing a BDC program for the same. Anyways will update you if i manage to find a BAPI or a FM for this.
Hope the above helps.
Regards,
Vivek

Is it possible to lock tracks on Premiere Elements 11? Overwriting clips?

Hi,
From what I can see/have read it is not possible to lock tracks whilst editing on Premiere Elements 11 - is that right?
I am a new user and have been finding that as I'm moving clips around the timeline it seems very unpredictable as to whether the clip slots into place without affecting the position of everything else or whether it creates a cut in the soundtrack leaving an empty space, or whether it just shifts things up.
Essentially I want to know how to overwrite clips (ie. when I drag a clip in, everything else on the timeline stays in the same place)
I'm assuming that this means that there is a method to do all of these things but I appear to have done them all by accident and can't work out the method!
Any help much appreciated. Thanks!

Holding down the Ctrl key (or the Cmd key on a Mac) as you add new clips to the timeline will keep everything on the timeline in place and override the ripple feature.

About the runtime repository?

Hi,
I'm confused by the runtime repository?
what was stored in the runtime repository when i deployed a map to a location?
i have two warehouse targets in my owb project.when i was deploying a map,a error occured.
following was the error description:
"Cannot deploy to the target location because it is owned by a different runtime platform."
the map is used to load data from one table in a target warehouse to a table in another target warehouse.
who can tell me the reason? thanks in advance!

Hi,
The runtime repository owns a set of targets. So for each target you can deploy only using the runtime repository that has this target schema registered to it.
It sounds like your target schema is therefore not managed by this runtime repository. You would have to register the target schema to this repository using the runtime assistant. Simply install a target into the existing target user.
Jean-Pierre

"Error when interpreting the runtime repository" BSP Component workbench

Hello,
I have enhance the Component BP_HEAD_SEARCH under some enhancement set in my development system. After transporting all my changes to Quality system, when checking the same development in BSP_WD_CMPWB it is showing an error -- "Error when interpreting the runtime repository" for the same component and enhancement set.
I have copied the repository.xml file from the development and again transported it to Quality system, even then the same error is coming.
Could anyone please suggest how to remove it Quality system, the error is not coming in Development system.
Regards,
Shobhit Srivastava

Hi Pankaj,
Try as above said
find the enhancement Z_* bsp application ,compare it with SAP bsp application.
if the XML file lost,
add the xml file toZ_* BSP application..
If it doesnt work leave it as it is.It will not affect your system.In our system also there is a same error .
Have a nice time!!!!!!!!!

"Error when interpreting the runtime repository" for IUICOBJD component

Hello experts,
I create an enhancement set for IUICOBJD component, and the systems return my the error:
"Error when interpreting the runtime repository"
Then in ICWEB, this enhancement affect to the view connectionObject. And this view doesn't appear.
Someone had some problems to create an enhancement set for IUICOBJD component ??
Is necesary to make somenthing with IUICOBJ component before to create the enhancement for IUICOBJD.
Could you tell me the steps to solve this??
Thanks in advance.
Best regards.

Hello Ismail, thanks for you help, I have tried to make this and the repository is the same code.
Do you know if is necesary to make something special to create an enhancement for IUICOBJD component ?? make something first with IUICOBJ and then with IUICOBJD???
I haven't any problems with other components for example with IUICMD the enhancement run ok.
Thanks in advance.
Best regards.

Document being distributed no changes not possible and btadminh could not be locked

Hi All,
I am getting ERROR: "document being distributed no changes not possible" & WARNING:"BTadminH could not be locked" in CRM WEBUI while trying to edit the order.
I checked all the BDOCs and smq1, smq2 ,smw01 here are no queues stuck here.
I also run distribution check FM, whenever i run it will be unlocked and able to edit. but this is not the solution for me because this error and warning getting to every new order (transaction) .
thanks,
Vinnu.

Hi,
Check the initial status settings, there should not be any distribution lock maintained.
Award point if it is helpful
Regards,
D Singh

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any suggestion ?

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any recomandation ?

Sorry, but the warranty for the phone is only valid in the country where you bought the device, and you can't send it in, Apple does not ship internationally.
Has the phone been officially unlocked? Only the carrier can unlock an iPhone.
iPhone: About unlocking

View of Component Is Not Visible. Navigation Is Not Possible

Hi All,
I have copied Window1 into Window2 and when I try to navigate from view1 to view2 in the copied window(window2),the dump "View of Component Is Not Visible. Navigation Is Not Possible " is thrown.
I have tried recreating the navigation links in the second window as well,but no luck.
Can any one please help me out,this is very uregnt...
Thanks,
Salma

Hi Salma,
Are you trying to navigate between the views of 2 different windows? If that's the case then you can proceed as follows:
Create 2 views and 2 windows and assign first view to first window and second view to second window. Also create an [exit plug|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/ca3351508f04e7e10000000a42189c/frameset.htm] for window1 with parameter URL of type string.
Note:
when you create windows automatically an interface view will also create with same name.
Now create application1 for window1(nothing but give interface1 ) in the same way create another application and assign corresponding interface view.
Then write your logic in the onAction method of view1,call the exit plug of window1 then pass the URL of second application.
Regards,
Uday

Is it possible to lock the numeric keyboard on the iPad mini so that I do not have to go back to the regular keyboard every time I press the space button?

Is it possible to lock the onscreen numeric keyboard on the iPad mini so that I do not have to go back to the regular keyboard every time I press the space button?

Thanks so very much!! You ROCK! I took your second suggestion and went into the iPad settings menu and then into the app. From there I was able to mute the sound effects I wanted. Really appreciate your help.
Cheers!
L

CIF queues - Lock not possible error in application log

hi,
Below is the application error log from SLG1
Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
We are currently checking, if this could be due to some issues with LiveCache processing.
Any input would be helpful.
SLG1 - Application log errror:
Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
Access block: data from system CLAF updated again
Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
Object is locked at present
Thanks,
RajkS

Hi Raj,
Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
locking issue.
also check the workprocesses details during those time. whether you have enough space to process the reqd the
t-data.
Regards
DPS

Preprocessing Roadmap Orinial system locked / logon not possible

Hi All,
I am currently working on the upgrade from CRM 2007 to CRM 7.0 with EHP1. I am runinng the synchronus upgrade and currently in the Preprocessing ROADMAP (Phase Name MAIN_SHDIMP/DIFFEXPADDI ).
Indeed, we have completed the SPDD / SPAU modification as well. And my question is, I am not able to login into the orignal system and its telling it as Upgrade is running logon not possible. (But this should happen only in the downtime roadmap - because I have done several ECC upgrade) . When preprocessing completed, we will obtrain downtime from the customer and we will start with the downtime roadmap.
But in CRM, I didn get any message or warning like that, I just gave confirmation for modifcation of SPAU / SPDD in the preprocessing roadmap. After few hours, I am not able to login into the originals system itself. Even I could see that there is no shadow system existing in the MMC as well. I am clueless here about the status and howcome it could happen like this ?
In short : My question is, downtime will start after giving confirmation in SPAU / SPDD?
Also I have unlocked / locked the shadow system earlier for some activity in the shadow system. Does that mean accidentally it locked my original system.
If anyone of your have any suggestion please do let me know
I have used the below command to unlock the shadow system...
tp unlocksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
SAPup.exe unlockshd SCR
tp locksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
SAPup.exe lockshd SCR
Regards
Vijay

Hi,
However, I have unlocked the same to access the original system. But wondering is the behaviour of the tool itself to lock the original system in the preprocessing stage itself?
Used command for unlockign the orinal system
tp unlocksys SCR pf=G:\usr\sap\trans\bin\TP_DOMAIN_SCR.PFL
Regards
Vijay

Component gs_jobmonitor: not possible to lock runtime repository

Similar Messages

Maybe you are looking for