Compositing Motion output files

Hi all-
I asked a question and many chimed in, but the answers didn't quite rectify the issue. I re-read my post, and I think the issue could have been better explained. Here goes:
We are producing an animated trailer for our film.
In Motion, we created a snowstorm (Motion project file #1) and a 3D words that fly over head (Motion project file #2-7).
The quality of each of these files looks GREAT when viewed in the Motion canvas on my 30" Studio display at 100% (great crisp edges).
I outputted each of the motion project files to a quicktime movie with an alpha channel using the ANIMATION codec set to 100%
The quicktime files, when viewed in quicktime look great -- just about as good as they look in the Motion canvas.
Now I need a solution to composite all of these ANIMATION quicktime files into a movie.....Final Cut, right?
So I did that and here is the result:
http://rccm.org/longago.jpg
The top image is a still exported from quicktime using one of the individual motion project files
The bottom is a still exported from FCP after the composite...
WHERE AM I GETTING THIS HORRIBLE LOSS?
I've read the article on why images look bad on the FCP canvas, but the lower speaks for itself when compared to the upper.
HOW CAN I BEST COMPOSITE THE QUICKTIME FILES?
Here's our workflow
1) Create in Motion
2) Output each element to a ANIMATION file
3) compile all output files in FCP (in a 1920x1080 sequence using the Animation codec at 100%)
4) Output from FCP using (????)
Using the latest versions of FCS
Thanks!
Many thanks!

OK....I changed the Field Dominence (in FCP's Sequence settings) to Upper (odd) and it now looks good.
I tested the output.
I checked and rechecked -- I am outputting from Motion with no field dominance.
I'm glad we found this solution...but why is this happening???
Steven

Similar Messages

  • Compositing Motion Output at highest quality

    We are producing an animated trailer for our film.
    There's a Motion-generated snowstorm in the background and Motion-generated 3D words that fly over head.
    Each individual element looks great in Motion (great crisp edges), but when the indivdual elements are mixed in FCP, it looks as if it loses its pristine look.
    I tried it a number of different ways. In the latest, I have the actual "motn" files right on the FCP timeline. The FCP sequence is set to animation. It still does not look as good as it does in Motion.
    I was hoping to output a master file from FCP in Animation, and then transcode it for playback using ProRes.
    Please offer me advise on a workflow, so the output can look as good as the canvas in Motion
    By the way, you can see the final version of the movie I am talking about on this site (click the "See the Preview Film" link
    http://believethemiracle.com/
    This version is compressed for the web of course.
    Using the latest versions of FCS
    Thanks!

    This may help:
    http://www.kenstone.net/fcphomepage/motion_text_in_fcpspencer.html

  • Output file is in slow motion

    hello,
    When I render my video in after effects the output file is in slow motion, its not the render settings but something else.
    Anyone can help me?
    thanks

    What do you mean that it's in slow motion? Are you sure that the problem isn't that you created a file so large that your video player and computer can't play it in real time?
    See this page:
    "FAQ: Why is my output file huge, and why doesn't it play back smoothly in a media player?"

  • Small frame rate variation between Motion output and reference video

    Hello all,
    Here's really wonky sort of question for all you Motion/post-production wizzes out there.
    I have a 1920x1080 lower thirds project that I am trying to synch up to a HD up-res of the same dimensions. The problem is that the up-res has a frame rate of 23.976 and Motion only allows for a frame rate of 23.98, so the output synchs up ok at the begining of each act (I have the projects split up into acts), but the further down the time line you go, the more it drifts.
    I've done the math and, for this particular project, the last title begins to appear at 00:20:09:11 in Motion, but appears in FCP at 00:20:09:07, a drift of 4 frames, 3 short of the 7 frames it is supposed to drift if you multiply the timecode in secconds by 23.976 and 23.98, but none the less, very annoying.
    Is there anything that can be done to remedy the situation besides going back after the final Motion output and resynching manually? A three or four frame drift isn't a huge deal, but the largest act I have is 32 minutes, which sounds like a 6 or 7 frame drift. Again not really a huge deal, but I do have several lower thirds that need to be frame accurate (and really, it would be nice if they were all that way).
    Thanks ahead of time.
    -G
    1.6 GHz G5 1.5GB RAM   Mac OS X (10.4.3)   Final Cut Studio

    Yeah. It kind of stinks when you have to swap platforms just to finish a project. AE is also a pain for longform, so I don't want to mislead you.
    I would imagine that Motion would be fine as long as you break the Project up in sections. My workflow is usually like this:
    Generate a matte or slug in a layer above the footage to fill the area where I need the Super or Composite. This should be fairly short (below 1 minute if possible) I may also have to RAZOR out the footage below the matte to match the matte timing. Select the Matte and footage below it if you wish to see the footage and sound in Motion.
    Select File/Send to/ Motion Project
    Create a new Motion Project. Name it for the section I'm editing.
    Add overlays and animations, filters, etc.
    Save project
    switch back to FCP and view/render from FCP.
    then move on to next section of timeline that needs overlays, repeat the procedure. Just copy paste the layers from one Motion project to another if you want to maintain certain layer continuity.
    This way, the Motion projects are managable size and you don't have to re-render the whole FCP project at once. The clips are not long enough for sync issues to appear. And Motion performs much better when the footage is short enough to load into RAM (sub 20seconds for most people).
    Also, to get the most out of Motion, you might want to turn off one of your monitors if you use 2 of them. Motion can use far more VRAM from your graphics card if only one monitor is active.

  • Why is the output file jerky ?

    Hi there,
    I have AE CS5 on my Mac. My system is 27" iMac core i5 with 12 GB RAM DDR3 1333 MHz with quad core.
    I rendered a 40 seconds clip with an earth spinning.
    I output it to mov format in 1920 x 1080.
    When I did a RAM preview, it was fine & the earth was spinning smoothly.
    But the output file (in mov) - (I did thru Composition > Make movie) when I play using QuickTime player is jerky at 20th Sec to 29th sec.
    I then import this mov file into Final Cut, it look stuck in the Viewer but was perfect on the Canvas.
    When I render in Final Cut, the output file as mov and use the same Quick Time player to play it & it is perfect.
    Can I know what is the reason that it is not working in Quick Time the first time when it was fresh out from AE ?
    Thank you.
    Cheers

    The default render settings use Quicktime Animation codec at best quality. These files will not playback smoothly because the data rate is too high for the hard drives to keep up with. The animation codec is a lossless codec designed not designed for playback.
    Final Cut uses compressed codecs designed for playback as the default. I'd suggest that you open up the help files (F1) and read the entire section on Rendering and Exporting (link).

  • Blur edges in stacked image output file

    Hi,
    I'm using the auto align and auto blend feature to stacked images for increased DOF. My source files are clean no ghosting, blur or what ever. After I run the files through the auto align and then auto blend  I flatten  the stack of layers. The final output file has blurring around the edges. I use the blended output files for creating panorama's. Notice the two bands of blur
    Does anyone know how to eliminate the blurred boarders in the out files or a btter way to get the result I'm looking for?
    thanks

    That's a lot of conversions. On top of that, iDVD takes your MP4 and makes an MPEG2. So you have a VHS file that was transfered to DVD (VOB file)? Then from DVD to MP4, from MP4 to MPEG2. Each conversion loosed something. On top of the Long GOP compression (DVD, MP4, MPEG2) means most frame information is thrown away. Long GOP looks at one frame (I-Frame) then records only the motion difference between that I-Frame and the next 14 frames (or so). So fast motion is difficult for any MPEG encoder, including iDVD. For more info on long GOP on a DVD:http://en.wikipedia.org/wiki/MPEG-2
    To improve the quality, I would try to go back to the original VHS material and import that as a DV file, NOT a VOB or otherwise compressed file. VHS to DV. After that, I would then split the 95-minute program into two movies for two DVDs. Getting the content under 60-minutes will allow for a higher bit rate on the DVD. And the only way to improve motion scenes is to use a higher bit rate (and less conversions!).
    Mike

  • Composing Motion output

    We are producing an animated trailer for our film.
    There's a Motion-generated snowstorm in the background and Motion-generated 3D words that fly over head.
    Each individual element looks great in Motion (great crisp edges), but when the indivdual elements are mixed in FCP, it looks as if it loses its pristine look.
    I tried it a number of different ways. In the latest, I have the actual "motn" files right on the FCP timeline. The FCP sequence is set to animation. It still does not look as good as it does in Motion.
    I was hoping to output a master file from FCP in Animation, and then transcode it for playback using ProRes.
    Please offer me advise on a workflow, so the output can look as good as the canvas in Motion
    By the way, you can see the final version of the movie I am talking about on this site (click the "See the Preview Film" link
    http://believethemiracle.com/
    This version is compressed for the web of course.
    Using the latest versions of FCS
    Thanks!

    Hope all's well Steven!
    Try exporting the movie as a QT movie from Motion directly (file/export) If you're mixing it with other material, choose the same format that you're attaching it to video-wise... i.e. HDV? or DV or whatever.
    And of course judge it externally as always, not in the canvas... You only see a proxy of the quality of the movie there. Might try just importing it back into motion to see if it doesn't look better there...
    Jerry

  • XML Publisher - OPP log: Output file was found but is zero sized - Deleted

    Hi,
    I have created one Main template and sub-template is called from it. I am working with Oracle Apps version 12.1.1. XML Source file gets created using rdf file attached to the concurrent program. Now after registering main template with the required concurrent program when i tried to execute it "View Output" button shows XML souce data instead of PDF report which i have called using main template. Log file was showing following error,
    Executing request completion options...
    Output file size:
    33140
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 3739501 on node ORAAPP13 at 09-AUG-2011 22:16:38.
    Post-processing of request 3739501 failed at 09-AUG-2011 22:16:51 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    ------------- 2) PRINT   -------------
    Not printing the output of this request because post-processing failed.
    Finished executing request completion options.
    And the OPP service log has following error, Can anyone guide me to solve this error.
    Template code: AERO_INV_MAIN
    Template app: XXAV
    Language: en
    Territory: US
    Output type: PDF
    [8/9/11 10:16:51 PM] [339827:RT3739501] Output file was found but is zero sized - Deleted
    [8/9/11 10:16:51 PM] [UNEXPECTED] [339827:RT3739501] java.lang.reflect.InvocationTargetException
         at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
         at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
    Caused by: java.lang.StackOverflowError
         at java.text.DecimalFormat.subformat(DecimalFormat.java:877)
         at java.text.DecimalFormat.format(DecimalFormat.java:674)
         at java.text.DecimalFormat.format(DecimalFormat.java:608)
         at java.text.SimpleDateFormat.zeroPaddingNumber(SimpleDateFormat.java:1203)
         at java.text.SimpleDateFormat.subFormat(SimpleDateFormat.java:1142)
         at java.text.SimpleDateFormat.format(SimpleDateFormat.java:899)
         at java.text.SimpleDateFormat.format(SimpleDateFormat.java:869)
         at java.text.DateFormat.format(DateFormat.java:316)
         at oracle.apps.fnd.security.CallStack.getInstance(CallStack.java:97)
         at oracle.apps.fnd.security.DBConnObj.setBorrowingThread(DBConnObj.java:990)
         at oracle.apps.fnd.security.DBConnObj.setBorrowingThread(DBConnObj.java:973)
         at oracle.apps.fnd.common.Pool.costBasedSelection(Pool.java:1885)
         at oracle.apps.fnd.common.Pool.selectObject(Pool.java:1686)
         at oracle.apps.fnd.common.Pool.borrowObject(Pool.java:950)
         at oracle.apps.fnd.security.DBConnObjPool.borrowObject(DBConnObjPool.java:584)
         at oracle.apps.fnd.security.AppsConnectionManager.borrowConnection(AppsConnectionManager.java:330)
         at oracle.apps.fnd.common.Context.borrowConnection(Context.java:1719)
         at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2314)
         at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2251)
         at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2108)
         at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1918)
         at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1762)
         at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1775)
         at oracle.apps.fnd.common.Context.getJDBCConnection(Context.java:1453)
         at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:170)
         at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1500)
         at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:362)
         at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211)
         at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171)
         at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
         at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1294)
         at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1149)
         at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1118)
         at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1085)
         at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1072)
         at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595)
         at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:602)
         at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:579)
         at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:533)
         at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:301)
         at oracle.apps.xdo.oa.schema.server.OAURLConnection.getAppsContext(OAURLConnection.java:121)
         at oracle.apps.xdo.oa.schema.server.TemplateURLConnection.getInputStream(TemplateURLConnection.java:89)
         at java.net.URL.openStream(URL.java:1009)
         at oracle.xdo.parser.v2.XMLReader.openURL(XMLReader.java:2353)
         at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:270)
         at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:256)
         at oracle.xdo.parser.v2.XSLBuilder.processIncludeHref(XSLBuilder.java:1045)
         at oracle.xdo.parser.v2.XSLBuilder.processImportHref(XSLBuilder.java:984)
         at oracle.xdo.parser.v2.XSLBuilder.processImport(XSLBuilder.java:949)
         at oracle.xdo.parser.v2.XSLBuilder.startElement(XSLBuilder.java:373)
         at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1252)
         at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:338)
         at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:285)
    Regards,
    Priyanka

    And metalink note 1100253.1 states that this issue (java.lang.StackOverflowError) might be caused by a too large set of data to be sorted in the layout file. Recommendation is to removed the sort from the layout file and instead sort the data already in the data definition.
    regards,
    David.

  • How to find name of report if I know name of instance and location of instance in Output File Store

    Hello all,
    can somebody help me to find name of the report if I know name of report instance and also location of instance in Output File Store. It should be done via Query Builder.
    It is ...rpt file as output from Crystal Reports. I tried few commands in Query Builder but usually they finished with timeout error.
    Could you help me and send specific command? Or way how to change timeout of Query Builder?
    Thanks.
    matus

    Hello all,
    We finally found solution.
    We knew that file is located on path .../Output/a_145/009/002/133521/~ce10c.....9332.rtf
    This file has more than 2 GB. We tried to find which report is related and provide necessary actions.
    As I mentioned we still failed due to timeout error - There was an error retrieving data from the server: CMS operation timed out after 9 minutes.
    So we tried to use our testing environment. We started there QueryBuilder and there we successfully tested that we found details about files from FileStore /like Name of the report in Launch Pad, CUID, ...
    SELECT SI_NAME, SI_CUID, SI_FILES FROM CI_INFOOBJECTS WHERE SI_FILES.SI_PATH = 'frs://Input/a_148/020/000/5268/'
    or
    SELECT * FROM CI_INFOOBJECTS WHERE SI_FILES.SI_PATH = 'frs://Input/ a_148/020/000/5268/'
    Best regards,
    matus

  • Customized Seeded report to XMLP report but its not generating output file?

    I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
    Steps i followed to Customize reports are.
    1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
    2. Ran report to generate xml data and using xml data created RTF file
    3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
    Now while i am running report its completing normal, but its not generating output file giving Error like –
    "Unable to find Published Output for this request"
    “No Output File Exist for Request No - xxxxx”
    No Idea why its not picking template, Can anyone help me in this?
    Using:
    Oracle Applications : 10.0.5.2,
    MS Word 2007
    Thanks,

    I am not giving the solution, providing you a hint..
    This is the query you need to satisfy,
    SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
    FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
    WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
    AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
    ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
    AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
    AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
    AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
    AND XDS.APPLICATION_SHORT_NAME=
    ( SELECT APPLICATION_SHORT_NAME
    FROM FND_APPLICATION
    WHERE APPLICATION_ID=CP.APPLICATION_ID)
    AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
    AND R.OUTPUT_FILE_TYPE='XML'
    AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
    ORDER BY R.REQUEST_ID DESC
    Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly....

  • Error message when publishing and problems opening output file

    I have 5 projects linked together. When I publish one, I get a message that the files listed below are linked to the open project, and one or more of these projects may require exporting. I have tried to open these files and choose File | Export | Project to | but the options in the list (Flash 8 and Flash CS3) are both grayed out--on every one of these files. I'm publishing to Flash 9.
    I didn't think much about this message until a few reviewers said they can't open the project, or when they do, they don't see my playbar on the skin.
    One more thing--when an IT person was trying to help one reviewer open the output file, the IT person said "Oh, there's a problem with the code in line 25." I guess that's the html code? I'm not a programmer, but I can look at html code. What should I be seeing there in line 25?
    Is their problem opening the output file(s) related to my message about possibly needing to export files? Why might they be having problems getting the output file to open?
    Thanks for any insights you can provide!
    SAM

    Hi Sam
    It depends on a number of things. Are you certain you uploaded all the files involved? If not, there will be problems.
    The message about the linked files is quite simply advising you that you have links from that particular movie that will expect to find the files being linked to.
    If a person isn't seeing playback controls and you have included them, it's likely you haven't provided the correct link for them to open and play the file. Typically you provide a link to the HTML page Captivate creates. As long as all the output files are in the same place on the server, you should be good to go.
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb.But the output records is originally 4000 records. When copy to new excel it is showing 3.5 mb only. Does anyone knows the answer for this issue?

    When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
    Does any one knows the answer please advice?

    Hello,
    This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
    MHTML and XHTML are more verbose formats than binary .xls.
    It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file).  This is a known limitation of RTF layout templates.
    BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
    Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
    Bogdan

  • How to get Log and Output File Names for a concurrent request

    Hi,
    I am submitting a concurrent frm OAF with the following code in AM
    try{
    OADBTransaction tx = getOADBTransaction();
    Connection conn = tx.getJdbcConnection();
    ConcurrentRequest cr = new ConcurrentRequest(conn);
    Vector parameters = new Vector();
    parameters.addElement("10");
    nRequestID= cr.submitRequest("CIE","DTFEMP","","",false,parameters);
    tx.commit();
    }catch(RequestSubmissionException e)
    How do i get the handle to log and output files for the abvoe concurrent request ?
    One more thing is there a way where we can evaluate the environment variables
    like in the above example once i get a the request id
    logfile = $APPLCSF/$APPLOUT/"l"+requestID+".log"
    and
    outputfile=$APPLCSF/$APPLOUT/"o"+requestID+".out"
    is there a way i can get the values of $APPLCSF and $APPLOUT from the os ?
    Thanks
    Tom...
    Thanks
    Tom ...

    You can query the Fnd_Concurrent_Requests table using Request_ID, which has the log & out file directory details.
    Hth
    Srini

  • No output file on custom Invoice Report

    Hi,
    I have made custom reports using Reports/XMLP for PO, Consolidated Invoice and Invoice. PO and Consolidated Invoice are running fine, my problem is with Standard Invoice.
    I made a modification to the datamodel of the standard report (RAXINV.rdf), creating a new report with the modified data
    (RAXINV_FAR.rdf). After uploading the report and creating the request, I
    followed all the steps that appear in the XMLP User Guide (Generate & register
    data definition, design and register the layout rdf model). After running the concurrent program It ends with no errors, but when I try to fetch the Output. Under View->Requests->Find->View
    Output, I get the error message: "Unable to find published output for this
    request" and after clicking 'OK' I get "No output file exists for request
    XXXXXX".
    The funny thing is that if I run the Concurrent "XML Report Publisher" I can retrieve the missing Output.
    Is there a patch/workaround to get the output without running "XML Report Publisher"?
    I´m on EBS 11.5.10.2 and the XMLP version is 5.0.0

    Stupid case of RTFM -- as I'd changed the mapping (as per other post) to include the ITEM as the higher level node this is the parameeter I need in the recordset
    so when recordset parameter is changed to item the other parameters rmaining the same)
    the file works fine
    Output text file
    1000001|One-time ship-to|ONE-TIME
    1000005|ddfask|;LK;L
    1000010|One Time  Customer Test|SADFIWQEFG
    I've given you the points in any case --although I solved the problem before I saw your post you put me on to the correct track from my other related post where I was missing  the higher level node in the data and message mappings
    Cheers
    and thanks
    Jimbo

  • In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file?

    In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file, similar to WebHelp where the use can select the language from a drop-down list? In Webhelp output you could create multiple Content categories. Is there something similar with the responsive output, or am I forced to have a completely separate set of output files for each language (for example, English, Japanese, Chinese, Korean, and Arabic)?

    As Rick, mentions, there's no default way.
    Having said that, there's nothing stopping you from doing it yourself. You can add a kind of language selector to the layout and set that for every html5 output. With some JavaScript, you can have the user switch between your outputs. It would look like content categories, but you'll have build it yourself.

Maybe you are looking for