Compressor Problem - Computer Shuts Down

I am trying to export a relatively large Motion file using Compressor. The file is approximately 4.5 minutes in length. The last few attempts, a black message appeared on the screen (with 80%+ of the file compressed), and it shuts down the computer. The computer if a Quad G5, with 4GB of RAM. Any idea what can be causing this?

Hi Jerry,
Quick Time Version: 7.1.5
FCP Version: 5.1.4
Compressor Version: 2.3
OS: OSX 10.4.9
The settings we're currently using is: a Telestream plug-in for Mac.
The export setting are for WMV format, bit rate 3000 NBS, CBR. The project was failing with different pre-sets that we tried.
The Motion project is about 4.5 minutes in length and comprises many different elements - including pics, videos, titles, effects. THe resoltion is set for 1360x768.
DO you need any ther info? I appreciate your help.
Y

Similar Messages

  • Booting problem - computer shuts down during booting

    I have run into a problem this morning after trying to download Yosemite. I have a Mid-2007 C2D iMac, that was running Mavericks very well this morning.
    I tried to download the Yosemite update - but it kept getting an error message as it was trying to download. The computer became unresponsive, so I shut it down to try and reboot.
    Now when I start my computer, I get a grey screen, with the Apple logo, then after a few seconds a spinning icon underneath, and then a few seconds under that a status bar. Once the status bar gets to about 25%, it goes away, and then the computer shuts itself down. Any ideas? Is it trying to install Yosemite, but can't find the files?
    Any thoughts would be appreciated - thanks!

    Hey bburkava,
    Thanks for the question. I understand that you are experiencing issues with your iMac not loading up past the Apple Logo and spinning gear. The following resource may provide a solution:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Thanks,
    Matt M.

  • I can only start my iBookG4 after deleting preferences. I have to go into single user mode to do so. If I don't go into single user mode, the computer shuts down during boot up. What might be the problem?

    I can only start my iBookG4 after deleting preferences. I have to go into single user mode to do so. If I don't go into single user mode, the computer shuts down during boot up. What might be the problem? How can I fix this?

    I do not have a startup disk. I did try fsck (based on what I learned from your reply-thank you). This failed (fsck); here is the message:
    ** Checking catalog file.
        Invalid key length
    (4, 8198)
    ** Volume check failed.
    /dev/rdisk03 (hfs) EXITED WITH SIGNAL 8.
    I am sure this is an easy fix; I just have no clue how.

  • My computer shuts down after about two minutes of use or at startup. What is the problem?

    My computer shuts down after about two minutes of use or at startup. What is the problem?
    Yesterday I used it for about ten minutes.
    Yesterday was the first time using it after about 5 days.

    Could you tell me how to check my system log, and how to tell if it is the disk cache? I am pretty sure it is not the GPU as I was having the problem using a Quadro 4000 as well.
    Thanks!

  • I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

    I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

    Any error message?

  • Since upgrading to Yosemite my computer closes down instead of going to sleep.  When I restart I get a message saying your computer shut down because of a problem. Has anyone a similar problem? What is solution?

    Since upgrading to Yosemite my computer (iMac late 2012 model) closes down instead of going to sleep.  When I restart I get a message saying "your computer shut down because of a problem". Does anyone have similar problem? What is the solution?

    Sorry, I was acting like it was an email. See below:
    Sat Nov  8 14:00:39 2014
    Panic Report ***
    panic(cpu 0 caller 0xffffff802a21e80a): Kernel trap at 0xffffff7fabaa5e28, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002d4e8000, CR4: 0x00000000001626e0
    RAX: 0x0000000000000000, RBX: 0xffffff803cbbf000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff81352f3b50, RBP: 0xffffff81352f3bf0, RSI: 0x0000000000000240, RDI: 0xffffff803cbbf000
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0x000000e492137674, R11: 0x000000e4917aebcc
    R12: 0x0000000000000000, R13: 0x000000000000023e, R14: 0xffffff803cc90000, R15: 0x0000000000000000
    RFL: 0x0000000000010293, RIP: 0xffffff7fabaa5e28, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81352f3800 : 0xffffff802a13a811
    0xffffff81352f3880 : 0xffffff802a21e80a
    0xffffff81352f3a40 : 0xffffff802a23a443
    0xffffff81352f3a60 : 0xffffff7fabaa5e28
    0xffffff81352f3bf0 : 0xffffff7fabbbd0a2
    0xffffff81352f3cb0 : 0xffffff7fab9a64a3
    0xffffff81352f3d00 : 0xffffff7fab9a91be
    0xffffff81352f3db0 : 0xffffff7fab9a80f2
    0xffffff81352f3dc0 : 0xffffff802a6d8008
    0xffffff81352f3e20 : 0xffffff7fab9a8d0b
    0xffffff81352f3e50 : 0xffffff802a6c5a03
    0xffffff81352f3ee0 : 0xffffff802a6be797
    0xffffff81352f3f00 : 0xffffff802a16be13
    0xffffff81352f3fb0 : 0xffffff802a2192c7
          Kernel Extensions in backtrace:
             com.apple.driver.AirPort.Brcm4360(900.19.8)[E6DF5F6D-3476-3BA6-B49B-BAADEC7DF58 0]@0xffffff7fab994000->0xffffff7fabf6afff
                dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[25CEDABE-0952-309D-AC20-A39DF84 9DFB7]@0xffffff7fab679000
                dependency: com.apple.iokit.IO80211Family(700.52)[13EA5B53-E76C-3F27-A9CA-6D3B59AE6F44]@0xf fffff7fab8e1000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7faa924000
                dependency: com.apple.iokit.IONetworkingFamily(3.2)[247581D8-DFC5-3AAE-B079-3D13F5514C2B]@0 xffffff7fab235000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x0000000029e00000
    Kernel text base: 0xffffff802a000000
    __HIB  text base: 0xffffff8029f00000
    System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
    System uptime in nanoseconds: 981693498948
    last loaded kext at 264463654768: com.apple.filesystems.msdosfs      1.10 (addr 0xffffff7facd6e000, size 69632)
    last unloaded kext at 325959214682: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7facd6e000, size 61440)
    loaded kexts:
    com.apple.driver.AudioAUUC           1.70
    com.apple.filesystems.autofs            3.0
    com.apple.driver.AppleBluetoothMultitouch         85.3
    com.apple.iokit.IOBluetoothSerialManager            4.3.0f10
    com.apple.driver.AppleHWSensor   1.9.5d0
    com.apple.driver.AppleMikeyHIDDriver     124
    com.apple.driver.AGPM        100.14.37
    com.apple.driver.ApplePlatformEnabler    2.1.0d1
    com.apple.driver.X86PlatformShim            1.0.0
    com.apple.driver.AppleOSXWatchdog        1
    com.apple.driver.AppleMikeyDriver           266.5
    com.apple.driver.AppleHDA 266.5
    com.apple.driver.AppleUpstreamUserClient          3.6.1
    com.apple.GeForce    10.0.0
    com.apple.iokit.IOUserEthernet       1.0.1
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AppleThunderboltIP       2.0.2
    com.apple.driver.AppleHWAccess   1
    com.apple.driver.AppleHV    1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport           4.3.0f10
    com.apple.driver.AppleSMCLMU     2.0.4d1
    com.apple.driver.AppleLPC  1.7.3
    com.apple.driver.AppleIntelHD4000Graphics       10.0.0
    com.apple.driver.AppleIntelFramebufferCapri     10.0.0
    com.apple.driver.AppleMCCSControl          1.2.10
    com.apple.iokit.SCSITaskUserClient            3.7.0
    com.apple.driver.AppleUSBODD      3.5.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.BootCache            35
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage           2.6.5
    com.apple.iokit.AppleBCM5701Ethernet   10.1.2b3
    com.apple.driver.AppleSDXC           1.6.5
    com.apple.driver.AirPort.Brcm4360           900.19.8
    com.apple.driver.AppleAHCIPort     3.0.7
    com.apple.driver.AppleUSBHub      705.4.1
    com.apple.driver.AppleUSBXHCI     705.4.14
    com.apple.driver.AppleUSBEHCI     705.4.14
    com.apple.driver.AppleHPET           1.8
    com.apple.driver.AppleACPIButtons           3.1
    com.apple.driver.AppleRTC  2.0
    com.apple.driver.AppleSMBIOS       2.1
    com.apple.driver.AppleACPIEC        3.1
    com.apple.driver.AppleAPIC            1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          218.0.0
    com.apple.nke.applicationfirewall   161
    com.apple.security.quarantine        3
    com.apple.security.TMSafetyNet     8
    com.apple.driver.AppleIntelCPUPowerManagement        218.0.0
    com.apple.kext.triggers         1.0
    com.apple.driver.AppleBluetoothHIDKeyboard    175.5
    com.apple.driver.AppleHIDKeyboard         175.5
    com.apple.driver.IOBluetoothHIDDriver    4.3.0f10
    com.apple.driver.AppleMultitouchDriver   260.30
    com.apple.iokit.IOSerialFamily         11
    com.apple.driver.DspFuncLib          266.5
    com.apple.kext.OSvKernDSPLib      1.15
    com.apple.iokit.IOAudioFamily         200.6
    com.apple.vecLib.kext           1.2.0
    com.apple.nvidia.driver.NVDAGK100Hal    10.0.0
    com.apple.nvidia.driver.NVDAResman        10.0.0
    com.apple.iokit.IOBluetoothHostControllerUSBTransport            4.3.0f10
    com.apple.iokit.IOBluetoothFamily  4.3.0f10
    com.apple.iokit.IOUSBUserClient     705.4.0
    com.apple.driver.AppleThunderboltEDMSink       4.0.2
    com.apple.driver.AppleSMBusPCI   1.0.12d1
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleSMC 3.1.9
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.driver.AppleHDAController        266.5
    com.apple.iokit.IOHDAFamily           266.5
    com.apple.iokit.IOSurface     97
    com.apple.iokit.IOAcceleratorFamily2         156.4
    com.apple.AppleGraphicsDeviceControl     3.7.21
    com.apple.iokit.IONDRVSupport      2.4.1
    com.apple.driver.AppleSMBusController    1.0.13d1
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOSCSIBlockCommandsDevice       3.7.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.7.0
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOUSBMassStorageClass     3.7.0
    com.apple.iokit.IOSCSIArchitectureModelFamily   3.7.0
    com.apple.driver.AppleUSBMergeNub       705.4.0
    com.apple.driver.AppleUSBComposite        705.4.9
    com.apple.driver.AppleThunderboltDPInAdapter            4.0.6
    com.apple.driver.AppleThunderboltDPOutAdapter         4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily    4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter     2.0.2
    com.apple.driver.AppleThunderboltNHI    3.1.7
    com.apple.iokit.IOThunderboltFamily         4.2.1
    com.apple.iokit.IOEthernetAVBController  1.0.3b3
    com.apple.iokit.IO80211Family       700.52
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily           3.2
    com.apple.iokit.IOAHCIFamily          2.7.0
    com.apple.iokit.IOUSBFamily            705.4.14
    com.apple.driver.AppleEFINVRAM  2.0
    com.apple.driver.AppleEFIRuntime            2.0
    com.apple.iokit.IOHIDFamily            2.0.0
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore     2
    com.apple.driver.AppleMobileFileIntegrity            1.0.5
    com.apple.driver.AppleCredentialManager           1.0
    com.apple.driver.DiskImages           389.1
    com.apple.iokit.IOStorageFamily      2.0
    com.apple.iokit.IOReportFamily       31
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform         3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto     1.0
    com.apple.kec.Libm   1
    com.apple.kec.pthread          1
    Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
    Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (7.15.124.12.8)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: APPLE HDD ST1000LM024, 1 TB
    USB Device: HD-LBU3
    USB Device: Hub
    USB Device: Apple USB SuperDrive
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Hub
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: iMac, Apple Inc., 23.4

  • How to stop your computer shut down because of a problem message

    how do I stop my computer from showing "your computer shut down because of a problem" during the boot up cycle. I have the issue fixed that was causing this i'm just trying to stop the message from coming up at boot up.

    Not knowing how you fixed it, here are a couple of things you can try.
    Startup – You need to Restart Your Computer

  • Computer shuts down without going to sleep

    hello,
    i've had an increasingly swollen battery with a corresponding diminished life. to a point that it barely fit, lasted ten minutes on its own and when it became depleted, the macbook pro would just shut down without a warning.
    so i bought a new one and although it lasted about 2h30 on its first cycle, when it displayed the low battery warning, the computer shut down without going to sleep...
    tried resetting PRAM, and SMC to no avail.
    i charged it back up a bit and it shut down again.
    it's on its 3rd cycle and battery health already dropped from 100% to 94%.
    anything i can do?
    thanks...

    Are you sure it is shutting down and not going to sleep "permanently"? I say this because I have (and others) a somewhat similar problem but it's not shutting down, it sleeps forever:
    http://discussions.apple.com/thread.jspa?threadID=1400708
    Also, I was going to suggest maybe your battery has died out, but you said it is plugged in, so probably not your battery as the problem.

  • Computer Shuts Down At BitLocker Boot Password Prompt

    Hi All,
    I have been using this computer for almost 6 months now with absolutely no problems until I encrypted my system drive with BitLocker. I am not using a TPM. Now, almost every time I get to the password prompt for BitLocker at boot, my computer turns completely
    off. I am using an ASUS Z97-E. ASUS tech support was completely useless and wanted to pass the blame instead of help, so I guess I'm on my own as far as their support.
    I have read previously that this may be related to ASUS products. I cannot seem to get it to boot reliably. If I completely remove power from the machine by unplugging it, sometimes that will give me enough time to enter my password. If I don't, often, it
    will only give me a couple seconds (and my password is pretty long) before shutting down.
    I have tried disabling Secure Boot and that seemed to help at first but then the problem came right back.
    There is a BIOS update available but I'm not confident it will fix the problem.
    Are there any specific BIOS settings I can change to make BitLocker stop making my computer shut down? Any Windows settings I can change that might help? 
    I'd really like to keep my data encrypted but I'm not sure if this hassle is worth it.

    Hi,
    Based on my research, this is a firmware problem. It does not matter what authentication method (TPM/without TPM/PIN+TPM/Password only/...) is used, it leaves you only some seconds before it shuts down.
    It's recommend you contact ASUS tell them to try and reproduce it. They would need to fix their BIOS.
    In addition, we could try to disable "fast startup" as below steps to see if it could be as a workaround:
    1.In Control Panel, open the Power Options item.
    2.Click the Choose what the power buttons do link.
    3.Clear the Turn on fast startup (recommended) check box.
    4.Click Save Settings.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Computer shuts down during render/prerender

    This was not my original problem but it has occured before and I know it will occur again.
    My computer shuts down for no reason when I try to render or prerender video in Adobe Premiere Pro CS4. From what I can tell it is a general issue with premiere that I am having. I have tried multiple video formats, multiple video lengths, and multiple rendering options and I am still getting random shut downs during rendering.
    Here are some specs for my computer which is a laptop:
    OS: Windows 7 Ultimate (64 bit OS)
    Proccessor: Intel Core 2 Duo @ 3.0 ghz
    Ram: 8 gigs of it
    Video: Nvidia Geforce 9600M GT
    1 Hard Drive w/ 280 gb of space
    As a recap.... My exact problem is that during the rendering or pre rendering proccess my computer simply shuts down as in it turns off.
    I can also add that the computer does act strangely leading me to believe that theres some hardware or software incompatibility. While it is rendering I can hear the CPU fan pick up which is usually normal for any rendering application but what I noticed was that it doesnt stop speeding up. Its like if it was going into an overload and I can confirm that at its peak, the computer shuts down.
    To add troubles... whenever I pre render any video and it succesfully renders.... Premeire will hang up really really bad if I try to play the pre rendered preview. In otherwords when you preview a video that it pre rendered it usually plays smooth and everything is fine. After I pre render something though and play it I can tell its locking up because the timeline bar is really jumpy and the video playback skips also.
    This is the problem I would really love fixed. I usually have to button smash my keyboard until I lock premiere up and then once it unfreezes itself i can preview my work smoothly. This is however like a good 5 mins of my time trying to get the preview to play smoothly though so its really hurting how fast I can work.
    If anyone can help me out I would greatly appreciate it. I will be trying to run the same stuff on my older laptop and observe the results. I personally think CS4 is incompatible with windows 7.

    Video: Nvidia Geforce 9600M GT
    If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
    PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
    Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
    Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
    It appears that you have a laptop. Is that correct?
    Good luck,
    Hunt

  • Computer shuts down after 5-15 minutes

    After 5-15 minutes of inactivity the computer shuts down when on battery. As long as the computer stays active, it will not shut down; ie: netflix watch now not a problem.
    Support had me do a hard reset with battery removed; repair permissions; and reset pram; but the problem continues. The Leopard I am using is an upgrade, clean install with latest update. This behavior does not occur when I run the computer off of an external usb inclosure with old Tiger operating system, running on the original disk . So this suggests to me that it is a software and not hardware problem. Also when plugged in the computer will eventually quit and restart on its own.
    Is there anything else to try or is archive and install the only option left because I have a corrupted Leopard install ??
    Thanks for any suggestions !!

    rakki,
    Just curious. When did this problem start? Possibly when you upgraded from 10.4 to 10.5? (10.4.11 to 10.5.5 even?).
    I'm having similar though not identical issues with battery performance that started the day I upgraded to 10.5.5 from 10.4.11.
    See this thread: http://discussions.apple.com/thread.jspa?threadID=1745812&tstart=0

  • Computer shuts down when backing up

    Hello,
    I am using an iMac with Mountain Lion 10.8.3. My Apple Airport Extreme is about one year old (fully updated and current). I am on a DSL connection with AT&T. I am backing up to an external 1.5 TB hard drive (non-Apple brand). There is lots of room remaining on that drive (about 700GB).
    All backups in the past have been smooth sailing with no problem.
    What's happening now are two things (but one of them I think I fixed). At first, Time Machine would try to back up but it would never succeed because it would give a message that there is not enough space available in the drive (it was saying that it needed 10 more GB of free space). But I know that's wrong. I could not figure out how to fix that issue, so I erased the drive completely and started over. Now, I no longer get the "full" message and all appears to be going well----UNTIL......(see next paragraph).....
    Now what happens is that it begins doing the backup process like normal (this would be the first/initial backup since I erased the drive and started over), however, once it gets about 100 GB or so (very rough estimate), the computer SHUTS DOWN. It turns itself OFF. No error window, no warning, no nothing----it just "POOF" turns off. To get it working again, I have to push the power button to turn it back on. There is no error message when I turn it back on.
    I am copying (below) the two most recent Time Machine messages from last night from that neat widget/app that I think pondini invented. I sure hope this helps to diagnosis what is wrong, because I'm stumped.
    The backup log that says "Automatic" is the first one that failed where it claimed there was not enough space to complete the backup. Once I erased the drive completely and started "fresh", that is what the second "Manual" backup is.
    Friday, April 5th
    Starting automatic backup
    Backing up to: /Volumes/Time Machine/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Event store UUIDs don't match for volume: 2TB HD
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Deep event scan at path:/Volumes/2TB HD reason:must scan subdirs|new event db|
    Finished scan
    Found 433286 files (625.62 GB) needing backup
    751.26 GB required (including padding), 741.14 GB available
    Deleted backup /Volumes/Time Machine/Backups.backupdb/ScottPeavler’s iMac/2013-04-04-110906.inProgress/D11ECC13-2EB1-4975-A041-8EEA74F1339B containing 4 KB; 741.14 GB now available, 751.26 GB required
    Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
    Deleted 1 backups containing 4 KB total; 741.14 GB now available, 751.26 GB required
    Backup date range was shortened: oldest backup is now Apr 5, 2013
    Backup failed with error: Not enough available disk space on the target volume.
    Friday, April 5th, 7:58PM
    Starting manual backup
    Backing up to: /Volumes/Time Machine/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 7267FE51-06B9-318F-80B2-EC5D94A925E2 eventDBUUID: DBDDEE41-0BFF-4DB0-AB1A-F7D152B9E065)
    Forcing deep traversal on source: "2TB HD" (mount: '/Volumes/2TB HD' fsUUID: B4DDE136-9D38-302F-A81E-4645F23F6D09 eventDBUUID: B8E29F6D-A35B-4E34-B733-7C2983BD24D9)
    Found 1331692 files (837.62 GB) needing backup
    1.01 TB required (including padding), 1.49 TB available
    Can anyone kindly help? Thanks!

    Do a verify of the local disk. The sudden complete failure sounds like a hard disk or memory issue.
    A5 http://pondini.org/TM/Troubleshooting.html
    So the hard disk is plugged into the computer directly?? If not, then I think you should do it that way. Backup to Extreme USB drive is not reliable.
    YOu don't have an error message for the manual backup.. and I am uncertain what the problem is.
    Do a reset of Time Machine. A4.
    And try again with the hard disk plugged into the computer directly.
    You can look at other suggestions on the troubleshooting page.
    eg http://pondini.org/TM/C4.html
    But if you are doing it with the usb drive in the Airport Extreme please read this.
    http://pondini.org/TM/Airport.html

  • Whole computer shutting down during encoding sequence

    this is a new problem for me - It used to work perfect until 1 week ago. now everytime I am trying to encode a sequence into a MP4 the whole computer shuts down during the process - at different % of the encoding   why?

    And a few other shutdown message threads that may help
    Read Bill Hunt on BSOD shutdowns http://forums.adobe.com/thread/772169
    -win32k.sys BSOD http://forums.adobe.com/thread/1404938?tstart=0
    -and an Encore fix http://forums.adobe.com/thread/1060443

  • Unknown error {-53} Computer shut down

    My computer shuts down while updating my ipod. Gives me an unknown error {-53} and sends my computer all wonky. I then have to reboot and start the mess all over again. What to do?

    Hello Peter,
    I already have the new BIOS you sent me.  The problem persists.  Toshiba has no Authorized Service for computers where I live (Brazil) as far as I can see on their site, which I can't understand since it is a global company.  So, I can not use my business computer now.  Apparently, I either have to ship it to the States (which will cost me more than the computer is worth, and I'm better off buying a new one of a brand that takes care of its customers globally), or I have to try and find someone here who thinks they might be able to discover the problem and fix it.  Any suggestions?

  • When opening my session, my computer shuts down

    Good morning;
    I have had this problem for two hours now and I am very worried. When I turn on my computer, everything goes well, I click on my session icon, type my password, and the computer starts loading it. However, it goes very slowly, and every time, at approximately 25/30%, the computer shuts down.
    Thanks for your help;
    Victor

    Thanks a lot, I actually spent the day with the technical services of my college and we ended up wiping out everything and installing a new version of OS, but thank you for your answer!

Maybe you are looking for