Computer Freezes and Keyboard Stops Working

I'm having serious issues with my computer freezing and not responding. I thought that it maybe a problem with OS X so I re-installed that but to no avail that did not ameliorate the situation. Not to mention it was near impossible to re-install it because the computer would keep freezing.
Now after I start up the computer, it will begin functioning normally I can open applications, etc but after probably 5 min, regardless of what I'm doing it will freeze and the keyboard and mouse will not work.
So to restart the computer I have to hold down on the power button. But then after I have waited the recommended 30 seconds to a minute to turn it back on the computer screen won't always illuminate. So I have to wait more like 15 to 25 minutes to try and turn the computer back on then the screen will work.
I'm not sure why this is happening, I just bought this computer less than a month ago, and this "problem" just started happening a couple of days ago. I'm a little frustrated, because this computer is brand new, do you think I just got a faulty computer or what?
If anyone has any advice or knows why this is happing please let me know. Thanks.
PowerBook G4 15-inch Titanium Mac OS X (10.4.4)

Hi, Melissa, and welcome to Apple Discussions. If your computer is brand new,
a) It's Aluminum, not Titanium. There's another set of Discussions forums that are specific to your model, and others with the same model may have suggestions for you that we Tibook owners won't.
b) You have a warranty, and this is what it's for. Don't hesitate to report the problem to the store where you bought the computer, or by phone to Applecare.
Good luck.

Similar Messages

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

Does it freeze with other type of cards. Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
To access the crash log it is officially called the event log. To access us OS Help.

Apple wireless mouse and keyboard stop working ... now says OS X version and bluetooth incompatible

For no apparent reason my apple wireless mouse and keyboard stopped working. I was not upgrading or installing anything, the batteries are good, nothing was changed as far as I know. Now bluetooth discovers the paired devices, connects for about 30 seconds, the disconnects ... or stays connected but doesn't work.
What's happenned ... I'm rushing to finish a big job ... any ideas? I've tried re-pairing but doesn't work ... says that OSX version may be incompatible with device bluetooth ... I'm using Lion so maybe there is another lion problem?

Hello:
Barry: What do you mean with "making devices favorites"?
This is the method:
Go to system preferences>bluetooth. Highlight an item in the sidebar. If detailed information does not appear, click on the little gear and select show more info. Then click on the gear again and select favorite.
And how could an hardware-related problem be (temporarily) solved rebooting the OS?
Intermittent problems are, IMHO, most often caused by hardware. Restarting will occasionally "fix" problems - why, I do not know.
Barry

Mouse and Keyboard stop working after reboot

So far the computer is working great except for the fact everytime you reboot the keyboard and mouse stop working... I did a clean format x2 and put the service pack on and I am still getting the same problem.
Anyone have this problem or something similair ? Any ideas ?
Thanks in advance :-)

The problem is not your S/W install. It's with the MSI Motherboard. Your best bet is to ask MSI when a fix will be available, or go buy a different board.

Mouse and keyboard stop working with Mavericks

This has happened twice now since installing Mavericks.
I'll be working along, and then all of a sudden, I am not able to click with my mouse and my keyboard stops working. I AM able to move the cursor around on the screen. But, I am not able to click on anything and I can't use the keyboard to force quit the finder. The only way to get unstuck is to press the power button on the front of the Mac to shut it down and then restart.
I am using a wired Apple Keyboard and a wireless Apple Magic Mouse. My Mac is a MacPro 2 x 2.3 GHz Quad-Core Intel Xeon Mac.
Like I said. this has never happened before. But it's happened twice since installing Mavericks.

Everytime I restart my computer, especially for updating maverick, my keyboard and attached mouse (both apple for an Imac) stop working. When I plug in an other keyboard, I can get into my Imac again. Would this SMC apply to this problem as well?
What should I do?
thanks, hb

Mouse and keyboard stop working ocassionally and I have to re-boot the computer. does anyone else have this issue?

I have a pwoer Mac with a dual quad processor and current os. If I turn off the computer at night and power up the next day my wireless mouse and keyboard do not work nor does my hardwired mouse. I have to hold the power button to re-boot the computer to get it to work.

Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
And/or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Macbook Air Mid 13 TrackPad and Keyboard Stopped working.

Both trackpad and mouse work when I have to sign into my account; however, once I'm on my windows screen both stop working. It tries and searches for bluetooth keyboard and mouse. I don't know how else to fix this issue. Please help I have tried all recovery options and erased everything on disk utility ( i saved my files first ) . for now i have been using an external mouse and keyboard. I also had the newest software update os x yosemite but when i re installed os x it installed lion but still the same problem.

finally its fixed!! ...i went on the mac osx hints site...someone suggested resetting the pram and pmu...i was worried i wouldn't be able to hit the key combinations because of the whole keyboard thing...but apparently, my keyboard still worked until it got into os x...so i reset the pmu with shift-option-control-power while the computer was off...and voila...problem solved!!
thanks for all your help....you *******!! lol jk
peas

Mouse and Keyboard stops working after a while

Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all. I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

And then after a while it will just use a new address:
Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
Then after that my mouse is unusable, the following is shown:
Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
Unplugging and plugging the mouse back does not work
I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
sudo rmmod uhci_hcd
sudo modprobe uhci-hcd
But I'm still not sure what causes the problem.
Last edited by willy (2008-10-30 15:02:54)

T510 Mouse and Keyboard stops working with Windows Update - unable to roll back, happened twice

My mouse has been working fine for a while but it stopped working followed by the keyboard, I put it down to a Windows update but because Windows 7 keeps bluescreening on a restore point I couldn't recover. I contacted Lenovo got the rebuild disc for my machine, completely rebuilt it, all working fine, then after 2 days same issue, mouse stopped, keyboard stopped, restore points make no difference. Does anyone know what windows update is causing this and if there is a fix aside from rebuilding, I can't keep doing this and I need to understand the cause really, not had it with a laptop before. Gone back to using my old laptop until I can get it sorted. Does anyone have any ideas?

I installed the latest drivers via windows update and got the touchpad back, rebooted, it went again. Netiher the trackpoint or touchpad work. I then thought rather than focus on drivers check the bios. I disabled the trackpoint in the bios, still neither works, however if I disable the touchpad in the bios and enable the trackpoint, the trackpoint does consistently work. I can't explain why the touchpad worked after a touchpad update but now fails, the ultranav driver is installed but if both are enabled in the bios it say it isn't installed, if the trackpoint is enabled it tells me I need to enable both so it clearly knows it's there. What's curious is that this doesn't happen on the complete clean IBM build. I can't not turn off windows updates, I'm a developer so Ioad the laptops up with a vast variety of software and I need many of the windows update fixes, either way I am surprised they are conflicting with the touchpad so dramatically. I can't see it being a virus I'm using two layers of protection and if I blow the machine away and installed the updates via an .iso image (so it's never connected to anything else), I can replicate the problem. It's feasible it's another piece of software causing the conflict. Any one have any idea what could be going on or seen it before?

External Mouse and Keyboard Stop Working When X220 is Docked and Screen is Closed

I have an X220 with a docking station, external monitor and external keyboard/mouse. When I start the laptop from a cold boot and it's docked, my external mouse and keyboard work fine with the screen open or closed.
If I undock and redock with the screen closed, the external keyboard doesn't work and the mouse cursor moves, but the mouse buttons don't do anything. If I open the screen, then the keyboard and mouse work fine.
I've swapped the keyboard and mouse and still have the same problem, so it's not the kb/mouse. This is a brand new X220 and the issue has been occurring since it was purchased.
Any thoughts?

hey mhambalek,
hard to say what's going on, though i would recommend heading to http://support.lenovo.com , do a full update of your unit.
also, if the external keyboard & mouse & monitotor is connected to your unit without the docking station, does the same thing happen?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

System freezes and wireless stopped working after update

Yesterday I ran my updates and the following were updated:
[2012-06-29 21:03] Running 'pacman -Syu'
[2012-06-29 21:03] synchronizing package lists
[2012-06-29 21:03] starting full system upgrade
[2012-06-29 21:08] upgraded ca-certificates-java (20120524-1 -> 20120608-1)
[2012-06-29 21:08] upgraded chromium (20.0.1132.43-1 -> 20.0.1132.47-1)
[2012-06-29 21:08] upgraded cryptsetup (1.4.2-2 -> 1.4.3-1)
[2012-06-29 21:08] upgraded docbook-xsl (1.77.0-1 -> 1.77.1-2)
[2012-06-29 21:08] upgraded grub2-common (1:2.00beta6-1 -> 1:2.00rc1-1)
[2012-06-29 21:08] upgraded grub2-bios (1:2.00beta6-1 -> 1:2.00rc1-1)
[2012-06-29 21:08] upgraded hplip (3.12.6-2 -> 3.12.6-3)
[2012-06-29 21:08] upgraded hyphen (2.8.3-1 -> 2.8.4-1)
[2012-06-29 21:08] upgraded imagemagick (6.7.7.7-1 -> 6.7.7.10-1)
[2012-06-29 21:08] upgraded libsystemd (185-3 -> 185-4)
[2012-06-29 21:08] upgraded systemd-tools (185-3 -> 185-4)
[2012-06-29 21:08] upgraded sysvinit (2.88-3 -> 2.88-6)
[2012-06-29 21:08] upgraded initscripts (2012.06.1-1 -> 2012.06.2-1)
[2012-06-29 21:08] upgraded keyutils (1.5.5-2 -> 1.5.5-3)
[2012-06-29 21:08] upgraded libnl (3.2.9-1 -> 3.2.11-1)
[2012-06-29 21:08] upgraded libusbx (1.0.12-1 -> 1.0.12-2)
[2012-06-29 21:08] upgraded libpcap (1.2.1-2 -> 1.3.0-1)
[2012-06-29 21:08] upgraded libquvi-scripts (0.4.5-1 -> 0.4.6-1)
[2012-06-29 21:08] upgraded linux-firmware (20120227-2 -> 20120625-1)
[2012-06-29 21:08] upgraded netcfg (2.8.3-1 -> 2.8.5-1)
[2012-06-29 21:08] upgraded pciutils (3.1.9-2 -> 3.1.10-1)
[2012-06-29 21:08] upgraded psmisc (22.18-2 -> 22.19-1)
[2012-06-29 21:08] upgraded qt (4.8.2-1 -> 4.8.2-2)
[2012-06-29 21:08] upgraded raptor (2.0.7-2 -> 2.0.8-1)
[2012-06-29 21:08] upgraded whois (5.0.16-1 -> 5.0.17-1)
Now today, after a reboot, my wireless card won't activate (I normally run on wired, but I needed to hook my printer up and its wireless) and the system locks up and freezes at random times (it just stops...the display displays everything as normal except nothing responds. there are no log messages in everything.log about it).
I have determined that the wireless problem probably came from the firmware update since when I tried to start the wireless card it said:
phy0 -> rt2x00lib_request_firmware: Error - Failed to request firmware
My wireless shows up in lspci as an Ralink Corp. RT2800 802.11n PCI which is correct.
How do I go about troubleshooting these issues? I am very new to Arch Linux (it's been a week or so now) so I think this will probably be a handy skill to have.

Looking at my currently loaded modules (using lsmod) it would seem that my wireless driver is loaded at the module level:
rt2800pci 9681 0
rt2800lib 43247 1 rt2800pci
rt2x00pci 5050 1 rt2800pci
rt2x00lib 35928 3 rt2x00pci,rt2800lib,rt2800pci
mac80211 395680 3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211 170074 2 mac80211,rt2x00lib
I also found some handy output from dmesg:
[ 702.101074] systemd-udevd[4835]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 762.590997] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 762.591584] systemd-udevd[4878]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 1285.067769] systemd-udevd[928]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 1345.615907] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 1345.616427] systemd-udevd[931]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 2377.442112] systemd-udevd[24961]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 2438.494258] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 2438.494770] systemd-udevd[26660]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 2606.966231] systemd-udevd[3796]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
[ 2667.394993] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 2667.395348] systemd-udevd[3807]: segfault at 20 ip 000000000040dac7 sp 00007fff334e3580 error 4 in systemd-udevd[400000+2c000]
Since the firmware for this update just came out on the 27th is it possible something made its way in there and broke this? I can't seem to find anyone else who has had this problem and from all appearances it looks like it should be working (and it used to work quite well).
EDIT: One thing I am not sure about is that the firmware is in the firmware directory. Here are all the rt* firmwares. Is this correct or should there be an rt2x00 firmware in there?
-rw-r--r-- 1 root root 8192 Jun 14 20:10 rt2561.bin
-rw-r--r-- 1 root root 8192 Jun 14 20:10 rt2561s.bin
-rw-r--r-- 1 root root 8192 Jun 14 20:10 rt2661.bin
-rw-r--r-- 1 root root 8192 Jun 14 20:10 rt2860.bin
-rw-r--r-- 1 root root 8192 Jun 14 20:10 rt2870.bin
lrwxrwxrwx 1 root root 10 Jun 14 20:10 rt3070.bin -> rt2870.bin
-rw-r--r-- 1 root root 4096 Jun 14 20:10 rt3071.bin
lrwxrwxrwx 1 root root 10 Jun 14 20:10 rt3090.bin -> rt2860.bin
-rw-r--r-- 1 root root 4096 Jun 14 20:10 rt3290.bin
-rw-r--r-- 1 root root 2048 Jun 14 20:10 rt73.bin
rtl_nic:
total 44
-rw-r--r-- 1 root root 2076 Jun 14 20:10 rtl8105e-1.fw
-rw-r--r-- 1 root root 1492 Jun 14 20:10 rtl8168d-1.fw
-rw-r--r-- 1 root root 1324 Jun 14 20:10 rtl8168d-2.fw
-rw-r--r-- 1 root root 5500 Jun 14 20:10 rtl8168e-1.fw
-rw-r--r-- 1 root root 3920 Jun 14 20:10 rtl8168e-2.fw
-rw-r--r-- 1 root root 3872 Jun 14 20:10 rtl8168e-3.fw
-rw-r--r-- 1 root root 3136 Jun 14 20:10 rtl8168f-1.fw
-rw-r--r-- 1 root root 1232 Jun 14 20:10 rtl8168f-2.fw
-rw-r--r-- 1 root root 1824 Jun 14 20:10 rtl8402-1.fw
-rw-r--r-- 1 root root 1840 Jun 14 20:10 rtl8411-1.fw
rtlwifi:
total 272
-rw-r--r-- 1 root root 13540 Jun 14 20:10 rtl8192cfw.bin
-rw-r--r-- 1 root root 16014 Jun 14 20:10 rtl8192cufw.bin
-rw-r--r-- 1 root root 20526 Jun 14 20:10 rtl8192defw.bin
-rw-r--r-- 1 root root 88856 Jun 14 20:10 rtl8192sefw.bin
-rw-r--r-- 1 root root 129304 Jun 14 20:10 rtl8712u.bin
Last edited by Los Frijoles (2012-06-30 16:18:17)

Mouse and Keyboard stop working since Upgrade to Leopard

I upgraded to Leopard on Friday. Twice today, I've had problems with the mouse/keyboard freezing me out of my MBP. I never had this issue prior to upgrading. The first time today, both the KB and mouse quit. Later in the day, just the KB. Both times were after periods of inactivity. I don't remember the exact scenario leading up to it, but in both cases, a reboot fixed it. I don't have enough detail to (in my mind) justify a trip to the genius bar, but maybe someone else out there has seen this and solved the mystery?
Cheers...

FYI, uninstalling Parallels and VMWare's Fusion (I was using both) doesn't help.
However another scrub of the System log did reveal something peculiar. Sort of a mess to post but in case anyone from Apple is watching this, I am attaching. This is coming up right after I resume wake from suspend.
Oct 31 09:33:25 jwilcox-mbp kernel[0]: AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
Oct 31 09:33:28 jwilcox-mbp kernel[0]: AppleUSBHub::setPowerState(0x3ef9a00, 2 -> 4) timed out after 10724 ms
Oct 31 09:33:28 jwilcox-mbp kernel[0]: USBF: 124.693 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:31 jwilcox-mbp kernel[0]: USBF: 127.693 AppleUSBUHCI[0x3dca000]::DeviceRequest - dmaCommand (0x3f27900) already had memory descriptor (0x557e400) - clearing
Oct 31 09:33:31 jwilcox-mbp kernel[0]: USBF: 127.694 AppleUSBUHCI[0x3dca000]::DeviceRequest - buffer dmaCommand (0x3f27800) already had memory descriptor (0x3f51580) - clearing
Oct 31 09:33:31 jwilcox-mbp kernel[0]: USBF: 127.694 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:32 jwilcox-mbp kernel[0]: AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
Oct 31 09:33:46 jwilcox-mbp login[228]: USER_PROCESS: 228 ttys000
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - dmaCommand (0x3f27800) already had memory descriptor (0x5467280) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - buffer dmaCommand (0x3f27900) already had memory descriptor (0x5469780) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - dmaCommand (0x3f27900) already had memory descriptor (0x601fc00) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - buffer dmaCommand (0x3f27800) already had memory descriptor (0x601b680) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:49 jwilcox-mbp kernel[0]: USBF: 144.798 AppleUSBHub[0x3f4b800]::SuspendPort - expected port to be suspended for conversion, but it is not!!

Mighty Mouse and wireless keyboard stop working

Just got my iMac yesterday and everything worked out of the box. But once yesterday and once so far today, the wireless mighty mouse and keyboard stopped working.
Today I noticed after the mouse stopped moving the cursor, the little green light on the bottom of the mouse was blinking. I turned off the mouse and turned it back on, but the green light still blinked and the mouse still didn't work.
The only thing that did something was the power button on the iMac. I had to turn off the iMac and turn it back on. Then the keyboard and mouse worked again.
What's going on? Do I need to get the iMac repaired?

Hello and Welcome to Apple Discussions ...
Try deleting this file. com.apple.bluetooth.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
If that doesn't help, make sure the batteries are charged. Go to System Preferences/Keyboard&Mouse. Click the Bluetooth tab. Your battery levels are displayed there. When it gets down to one green bar on the left, install new batteries.
If none of the above helps, turn the mouse and keyboard off. Delete the mouse and keyboard from the System Preferences/Bluetooth devices window. Select the mouse in the window on the left, then click the minus - button. Now open the slider on the mouse so the green light blinks. Click + which will launch the Bluetooth Setup Assistant. Just follow the instructions. Same for the keyboard. If you still have issues with the wireless hardware, I'd take it back. You have 14 days in case you need to replace the iMac.
Carolyn

Touch pad and keyboard not working!

Just the other day while my computer was starting up i took a tissue and started to clean it. Then the password screen popped up. I typed in the password and started to browse the web. After about 1 minute, my touch pad and keyboard stopped working! I tried to restart the computer and it did nothing. I then restored the computer to this morning ( the update my computer did while it was turning on also the time i was cleaning it. ) and it still did nothin. Please help with this problem, right now im using a USB mouse and a on screen keyboard!
I am using a HP pavilion g7 running windows 7 and AMD a6 vision.
product key: P9BXR-F3G4G-HQD6J-XBMJP-93QKT
please help me
BTW i did press somekeys while cleaning the laptop.

Yes I installed the right drivers before trying to dual-boot with Linux. The issue was there from the beginning. But the issue appears only after 1 or 2 hours of use. It was mandatory for me to install Linux, for my studies. So I hope it doesn't break the warranty, because it would be unfair for people who need to do what I did.
The problem is that I am right now in Finland, but I am French and I bought my netbook when I was in France. So if I send it back to HP France, it will take weeks and weeks to get it back here, and shipping cost will be really expensive, and I will be without computer during several weeks, which is impossible for me as I need it for my studies. That is why I want to go to HP Finland and ask them. I know I could call them but the last timeI called HP France, I waited for hours and didn't get any answer on the phone.

Starting problems, computer freezes, keyboard and mouse stop working

Hi can anyone help? My powerbook has just stopped working, rarely starts, when it does keyboard and mouse stop working after a while or even before i am able to login. At one point I was getting a grey screen with the words, memory access invalid???? Please help...
powerbook G4

power surge could have damaged something inside, or it maybe unrelated to the problem.
PowerBook can get hot if there is some short circuit inside and power flow is disrupted, also it's possible that the fans are not working properly.
as a guess, it is likely either hard drive or logic board problem.

Computer Freezes and Keyboard Stops Working

Similar Messages

Maybe you are looking for