AS Java applications not starting after patching from 2004s SPS10 to SPS11

Hi folks,
after patching our NetWeaver 2004s from SPS10 to SPS11 and the Kernel from 7.00.83.0 to 7.00.95.0, the applications on the AS Java do not start up automatically any more.
Under the following URLs, the same error is shown:
http://<fully qualified host name>:51000/
http://<fully qualified host name>:51000/nwa
http://<fully qualified host name>:51000/sap/monitoring/SystemInfo
http://<fully qualified host name>:51000/useradmin/
http://<fully qualified host name>:51000/wsnavigator
http://<fully qualified host name>:51000/uddiclient
503   Service Unavailable
SAP J2EE Engine/7.00
Application stopped.
Details: You have requested an application that is currently stopped
http://<fully qualified host name>:51000/webdynpro/welcome/Welcome.jsp
itself works, the two links Content Administrator and Web Dynpro Console both lead to the same 503 error described above
On http://<fully qualified host name>:51000/irj, the error message is different:
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started because is in MANUAL start-up mode..
Exception id: 09:33_09/05/07_0003_102709250
See the details for the exception ID in the log file
In std_server0.out we have the following entries, right after the list of all services that were started:
ServiceManager started for 39904 ms.
Framework started for 46720 ms.
SAP J2EE Engine Version 7.00   PatchLevel is running!
PatchLevel January 31, 2007 18:37 GMT
May 9, 2007 9:40:19 AM  com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_3] Fatal:
The last line with com.sap.portal.prt.sapj2ee.error is listed another 131 times, and there is also the following message:
### Excluding compile:  com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
We can connect to the system using Visual Administrator. Under Server->Services->Deploy, most applications are not running. It is possible to start a few applications manually, others however do not start showing different exceptions.
We have AS ABAP and AS Java installed, as well as BI, DI, EP and EPC. AS ABAP seems to be running fine.
We have also noticed the following deviations in JSPM:
BC_FES_IGS is Release 7.00 SP Level 7.0
EP_BUILDT is Release 7.00 SP Level 10.0
SAP_BUILDT is Release 7.00 SP Level 0.0
All other components except for the Kernel are Release 7.00 SP Level 11.0 or 11.2
What could be wrong, and what can we do to solve it?
Best regards,
Robert Schulte

Thanks for your response, usha rani
1. We already tried that, unfortunately, it does not help
2. We checked the kernel version thoroughly after you suggested it, everything seems to be fine. We had a Unicode kernel before, and we still have one.
3. safemode is already set to NO
4. J2EE's default.trace is full of exceptions, but none of them is pointing me into a helpful direction.
Perhaps the exceptions mean more to someone else:
java.lang.Exception: Exception loading and instanciating sub-manager:
com.sap.caf.km.repositorymanager.CAFSecurityManager
(java.lang.ClassNotFoundException: com.sap.caf.km.repositorymanager.CAFSecurityManager)
com.sapportals.wcm.repository.runtime.CmConfigurationProvider#
sap.com/irj#com.sapportals.wcm.repository.runtime.CmConfigurationProvider.Component
<SetRoomIdForDiscussionObjects> will not be available.
Failed to load class
<com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager>
#J2EE_GUEST#0####1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22
##0#0#Error##Plain###
java.lang.ClassNotFoundException:
com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager
com.sap.portal.prt.runtime.broker#sap.com/irj#
com.sap.portal.prt.runtime.broker#J2EE_GUEST#0####
1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22##0#0#
Error#1#/System/Server#Java###
[PortalServiceItem.startServices] service initialisation failed:
tc.eu.odi.conn.uwl|OdiBridgeService
[EXCEPTION]
{0}#1#com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException:
Could not instantiate implementation class com.sap.tc.eu.odi.conn.uwl.OdiBridgeService
of Portal Service tc.eu.odi.conn.uwl|OdiBridgeService because: could not load the service
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started
because is in MANUAL start-up mode.
There are many more entries in default.trace.

Similar Messages

  • Concurrent Manager not starting after patching/ cloning

    Hi,
    We have an issue where after cloning and/or patching an environment the concurrent manager doesn't start. Our steps to resolve this problem have thus far been as follows:
    1. Apply 3830807
    2. Run autoconfig
    3. Run cmclean.sql on environment
    4. Check the libc* files in 8.0.6 ORACLE_HOME/lib/stubs
    We had an instance after a patch was applied where the conc mgr did not start and we applied all of the above, in that order. No success. We then decided to apply the 3830807 patch again and run autoconfig- basically re- run steps 1 and 2. Success. In another instance, running the cmclean.sql resolved the error. In some instances, simply shutting down the application and DB and restarting will be enough.
    Our problem is that the resolution to this error always seems random. What may work in one instance almost never works in another. Additionally, the problem has started since we've applied ATG RUP 6 to our LIVE environment and our clones. Coincidence?
    We have logged an SR but I feel like we're being spun in circles- I'm not getting a direct answer or resolution path from them.
    If someone could provide some guidance on a proper resolution path for this conc mgr issue I would very much appreciate it.
    Thanks,
    Lia.

    Basically the approach we're now taking (and that's working) is that after applying a patch, or set of patches, we apply patch 3830807 and then run autoconfig on the db and apps tier. We then shut down the application (if not already down) and the database and then bring everything back up.
    Thanks to all for their assistance.
    Lia.

  • Firefox will not start after upgrade from 3.0.1

    I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I cannot open Firefox. It is not like the other "Will not start" problems, because in the Task Manager, firefox.exe pops up, then goes away instantly. I have tried using Safe Mode, doing a clean install by uninstalling Firefox and my profile, cleaning the registry, then using CCleaner, then trying to reinstall, but the problem persists. Sometimes firefox.exe doesn't even show up in the Task Manager. I also cannot use any version of IE(even if I wanted to), Safari or Chrome. They all have the same results. I suspect that it is not a problem with Firefox, but with my computer, but I don't what is wrong. Can anyone help me?
    == This happened ==
    Every time Firefox opened
    == I upgraded from 3.0.1

    Sounds like something is killing off your browsers before they can start. I really have no idea why Firefox 3.0.1 is working somehow, though.
    Do a malware check with a few different programs, you need to use all, because not all programs detect the same malware.
    For each of these, make sure they are updated after installing, and run a full scan.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

  • FNDFS Listener not starting after patching

    12.1.3
    redhat 4.8
    DB 11.2.0.1
    We recently did patching on our R12 system. The system is online, however the concurrent managers are not working due to the APPS_NPCP listener not starting. When attempting to start FNDFS this is the error we get. This was a working system prior to applying the patches. I can provide a list of patches if needed. There were just under 30 of them I believe. The majority of them were in doc # 437878.1
    [applnpcp@ahdsedstws16 apps_backup]$ adalnctl.sh start
    adalnctl.sh version 120.3
    Checking for FNDFS executable.
    Starting listener process APPS_NPCP.
    adalnctl.sh: exiting with status 1
    <============From adalnctl.txt logfile =================>
    Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=ebusr12)(Port=1636))
    TNS-12533: TNS:illegal ADDRESS parameters
    TNS-12560: TNS:protocol adapter error
      TNS-00503: Illegal ADDRESS parameters
    Listener failed to start. See the error message(s) above...
    09/10/13-13:52:41 :: adalnctl.sh: exiting with status 1
    <======================end=======================>
    Nothing really should have changed in the context file or in how the tnsnames.ora is generated, looking at the file it appears correct. What else can I check as to why this won't start anymore?

    Where the patches applied to the correct ORACLE_HOME?
    Have you verified the contents of listener.ora and tnsnames.ora file under $TNS_ADMIN directory? Running AutoConfig should usually fix those files (assuming it completes successfully and you have proper entry in the /etc/hosts file and your FND_NODES table entries are correct).
    How to get a clean Autoconfig Environment ? (Doc ID 391406.1)
    Thanks,
    Hussein

  • MSY does not start after upgrade from 50SP6 to SP11

    Hello experts again,
    after upgrading from 50sp6 to sp11 I cannot start MSY.
    I've implemented note 1099457 - AMT is starting now,
    but MSY still does not start.
    Has anybody some experience what this could be ?
    Thanks and best regards
    Gerd

    Hi,
    as I assume the AMT is installed completely new when doing a SP upgrade because it is a standard tool which you cannot enhance. Therefore it is running properly.
    Regarding MSY you need to perform a full generation within MAS (Visual Studio) after changing the generation settings to MSY (similar to MSA) because the runtime files like MSY.DLL need to be fitting to the new SP11 framework dlls.
    Regards,
    Wolfhard

  • Application not starting after mac os 10.8.5 on mac mini

    all my apps failed to start after mac os upgrade to 10.8.5 on mac mini.
    except safari.
    how to recover or downgrade.......

    Try starting in Safe Mode and see if the problem still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+).

  • WebLogic Server can not start after upgrade from 10.3.3 to 10.3.5

    Hi all,
    I get follwoing errors after upgrade fmw-share libraries (WLS 11.1.1.3 to 11.1.1.5), if I want to start AdminServer. It seems CLASSPATH is not updated correct. How can I solve this issue?
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
    java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
    java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
    java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
    java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
    java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
    java.lang.ClassNotFoundException: oracle.ias.cache.Startup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
    java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    Thanks,
    Mohammad

    Hi Mohammad,
    You are right, this error seems to indicate that the script environment cannot find the required java classes.
    Please try the following:
    1. Open a shell (command prompt) on the computer on which you created the domain.
    2. Change to the directory in which you located the domain.
    By default, this directory is BEA_HOME\user_projects\domains\domain_name, where BEA_HOME is the top-level installation directory of Oracle WebLogic products.
    3. Set up your environment by running one of the following scripts:
    bin\setDomainEnv.cmd (Windows)
    bin/setDomainEnv.sh (UNIX)
    On Windows, you can use a shortcut on the Start menu to set your environment variables and invoke WLST (ToolsWebLogic Scripting Tool).
    4. Invoke WLST by entering: java weblogic.WLST
    The WLST prompt appears.
    wls:/(offline)>
    5. Then you can start the AdminServer with WLST
    startServer('AdminServer','ClassicDomain','t3://localhost:7001','weblogic','password','/home/oracle/Oracle/Middleware/user_projects/domains/ClassicDomain')
    This link may also help: http://download.oracle.com/docs/cd/E12840_01/wls/docs103/config_scripting/manage_servers.html#wp1009240
    Hope your issue gets resolved.
    Thanks,
    Cris

  • OSX will not start after reboot from single user mode

    Hello,
    Yesterday my iBook G4 was only starting in BASH mode. I've looked at discussions describing Kernel Panic and have followed the advice posted to the following post:
    http://discussions.apple.com/message.jspa?messageID=1553062#1553062
    When I reboot I get past the language setup and the boot progress screen/progress bar gets almost complete before going to a continuously stalling/reloading blue screen.
    When I try the command:
    rm /var/db/.AppleSetupDone
    described in one of the responses I get a 'No such file or directory' message
    I assume that as when I try:
    cd /System/Library/CoreServices/Setup\ Assistant.app/Contents/MacOS
    It returns '-rwxr-xr-x 1 root wheel 58912 16 Aug 21:10 Setup Assistant'
    it is the file that is missing.
    As the discussion thread I was following seemed to go off on a bunch of other tangents (and was completed), I am hoping somebody might have suggestions for my specific problem under this new discussion.

    Welcome To  Discussions Kongxyz!
    It will help if you first post some background info.
    "...only starting in BASH mode."
    Explain exactly what was happening, and what the screen displayed.
    Exactly which model iBook G4 is it?
    What is the Processor speed?
    What size is the Hard Drive, and how much space is available?
    How much RAM is installed, and is it original or added?
    Which version number of Panther 10.3.x is installed
    What peripherals do you have connected? A keyboard, mouse, printer, external drive or modem, router, etc?
    What happened between the last time the iBook started successfully, and when it didn't?
    Have you made any changes, like upgrading the system, updated or installed any applications or programs, etc?
    Have there been any unusual occurences, like freezes, crashes, power outages, etc?
    Are you able to startup from the system install disc to run Disk Repair?
    Have you run Repair Permissions?
    Instructions posted below.
    Is the Mac shutdown overnight, or does it run 24/7?
    Have you ever run any routine Maintenance procedures?
    THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
    1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
    2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu.
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
    3.Click the First Aid tab.
    4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5.Select your Mac OS X volume, if necessary.
    6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
    7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
    8.When finished, select Quit Disk Utility from the Installer menu.
    9.Select Quit Installer from the Installer menu.
    10.In the resulting pop-up window, choose restart.
    11.After the computer has restarted, you can eject the CD.
    TO REPAIR PERMISSIONS ON THE STARTUP DISK
    1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
    2.Click First Aid.
    3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
    Rerun RP until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
    When "Repair Permissions" is complete. Quit "Disk Utility".
    ali b

  • Jdeveloper does not start after patch update

    Hi all,
    I just installed the latest patch for jdeveloper, and I am having a problem starting the IDE. The splash screen displays, and that is it. When I run jdev from console, I get a bunch of error messages -
    java.lang.NoSuchMethodException: oracle.jdevimpl.vcs.generic.profile.ActionInfo.
    addHelpTopicId(java.lang.String)
    at java.lang.Class.getMethod(Class.java:1581)
    at javax.ide.extension.DynamicHook.findMethod(Unknown Source)
    at javax.ide.extension.DynamicHook.attachData(Unknown Source)
    at oracle.jdevimpl.vcs.generic.esax.VCSHookHandler.attachData(VCSHookHan
    dler.java:231)
    at javax.ide.extension.DynamicHook.end(Unknown Source)
    at javax.ide.extension.spi.SAXManifestParser$Handler.endElement(Unknown
    Source)
    at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingPa
    rser.java:1310)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
    ngParser.java:328)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
    arser.java:295)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
    at javax.ide.extension.spi.SAXManifestParser.parse(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.loadExtension(Unknown Source)
    at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtension(Extension
    ManagerImpl.java:331)
    at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.initialize(Unknown Source)
    at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
    agerImpl.java:763)
    at javax.ide.Service.getService(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(Unknown So
    urce)
    at oracle.ide.ExtensionRegistry.getOracleRegistry(ExtensionRegistry.java
    :81)
    at oracle.ide.IdeCore.startupImpl(IdeCore.java:1049)
    at oracle.ide.Ide.startup(Ide.java:674)
    at oracle.ideimpl.Main.start(Main.java:49)
    Any help pls ?
    Thanks,
    Kunle.

    More discussion on this here -> http://forums.oracle.com/forums/thread.jspa?threadID=398360&tstart=0
    The simple answer is that the SU4 update contains an extra jar which is not needed.
    If you go to the jdev/extensions directory and rename oracle.jdeveloper.vcs.10.1.3.jar to oracle.jdeveloper.vcs.10.1.3.jar_old, then rename oracle.jdeveloper.vcs.10.1.3.jar.backup to oracle.jdeveloper.vcs.10.1.3.jar jdev will start correctly. A bug has been logged for this, and we will correct it as soon as possible.
    Thanks,
    Geoff

  • Firefox not starting after updating from v24 to v32 on centos 6.5

    I have updated my firefox from version 24 to version 32 recently released for Centos 6.5 in the official packs, but after updating now firefox is not at all starting.
    Even the first screen where it checks for add-ons dependency is also not coming up, what I can see is just firefox starts and crashes within seconds without showing any screen.

    I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
    Happy Browsing.....

  • Applications not working after upgrade from apex 3.2 to apex 4

    hi,
    we've created an application with apex 3.2 which works fine.
    today we upgraded apex 3.2 to apex 4. after the upgrade the application doesn't work anymore.
    we recognized the following things:
    - interactive reports don't work anymore
    - tabs don't work anymore
    - buttons don't work anymore
    what do we have to do, to get our apex 3.2 application to work with apex 4?
    regards,
    matthias

    I've seen similar problems to my applications. I've found a problem with the derived columns or link columns in reports. The only solution I founded is to delete the columns and then make them again. Now are working. No problem founded specifically for the interactive reports. If there is an automated solution for the derived columns or link columns it will be appreciated ;-).

  • Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

    I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
    I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
    I do not use a firewall or virus program.
    My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
    What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
    It is either a Ubuntu problem or a Firefox problem.
    Sonny.

    ''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
    Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
    The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

  • JAVA Stack not starting up after System Copy

    Hi,
    We have done the system copy from Production to Sandbox and we are facing an issue with the JAVA Stack not starting up.
    Following is the error in the SAPInst log file.
    INFO 
    2014-09-07 18:06:48.86 [iaxxbfile.cpp:538]
    CIaOsFile::chmod_impl(0755)
    Authorizations set for /usr/sap/CS0/DVEBMGS00/data/icmandir/its/lsgui/images/list/symbols.
    INFO 
    2014-09-07 18:06:50.494 [iaxxbfile.cpp:538]
    CIaOsFile::chmod_impl(0755)
    Authorizations set for /usr/sap/CS0/DVEBMGS00/data/icmandir/its/lsgui/js.
    INFO 
    2014-09-07 18:06:50.819 [iaxxbfile.cpp:538]
    CIaOsFile::chmod_impl(0755)
    Authorizations set for /usr/sap/CS0/DVEBMGS00/data/icmandir/its/lsgui/js/texts.
    ERROR 
    2014-09-07 18:06:55.22 [syxxcfsmgt.cpp:211]
    CSyFileSystemMgtImpl::getNode(const CSyPath & path, CSyPath::NodeType nodeType) const
    lib=syslib module=syslib
    FSL-02015  Node /usr/sap/CS0/DVEBMGS00/data/stat46 does not exist.
    INFO 
    2014-09-07 18:46:32.15 [iaxxbfile.cpp:538]
    CIaOsFile::chmod_impl(0755)
    Authorizations set for /usr/sap/CS0/DVEBMGS00/work/co.sapCS0_DVEBMGS00.
    INFO 
    2014-09-07 18:46:35.895 [iaxxbfile.cpp:538]
    CIaOsFile::chmod_impl(0755)
    Authorizations set for /usr/sap/CS0/DVEBMGS00/work/dw.sapCS0_DVEBMGS00.
    WARNING
    2014-09-07 18:46:36.218
    CJSlibModule::writeWarning_impl()
    Broken link /usr/sap/CS0/DVEBMGS00/work/ig.sapCS0_DVEBMGS00 -> /usr/sap/CS0/DVEBMGS00/exe/igswd_mt detected.
    Please guide.
    Thanks,
    CJ

    For system of the J2EE stack did you use sapinst export and import ?
    If the Java doesn't start then check the trace files (dev_server, std_server, bootstrap logs) present at /usr/sap/CS0/DVEBMGS00/work
    Regards
    RB

  • SLD will not start after I upgraded Netweaver 2004s Portal

    SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
    It gives me the following J2EE error:
    Application error occurred during request processing.
      Details:   java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
    Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

    Hi ,
    as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
    See the threads below for more information
    NetWeaver 2004s upgradation problems
    Could not run WebDynpro Tutorial - NoClassDefFoundError
    Points are welcome if it is useful
    Koti Reddy

  • Workflow notification mailer not starting after APPS pwd change

    Workflow notification mailer not starting after APPS pwd change
    The error in the WFMAILER log is
    [appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
    wferr:
    - WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
    cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
    Can you please advice ?
    EBS 11.5.10.2
    DB 11.2.0.1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
    The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
    [Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
    Please see these docs.
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
    Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
    Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
    Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
    Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
    Thanks,
    Hussein

Maybe you are looking for