FNDFS Listener not starting after patching

12.1.3
redhat 4.8
DB 11.2.0.1
We recently did patching on our R12 system. The system is online, however the concurrent managers are not working due to the APPS_NPCP listener not starting. When attempting to start FNDFS this is the error we get. This was a working system prior to applying the patches. I can provide a list of patches if needed. There were just under 30 of them I believe. The majority of them were in doc # 437878.1
[applnpcp@ahdsedstws16 apps_backup]$ adalnctl.sh start
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_NPCP.
adalnctl.sh: exiting with status 1
<============From adalnctl.txt logfile =================>
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=ebusr12)(Port=1636))
TNS-12533: TNS:illegal ADDRESS parameters
TNS-12560: TNS:protocol adapter error
  TNS-00503: Illegal ADDRESS parameters
Listener failed to start. See the error message(s) above...
09/10/13-13:52:41 :: adalnctl.sh: exiting with status 1
<======================end=======================>
Nothing really should have changed in the context file or in how the tnsnames.ora is generated, looking at the file it appears correct. What else can I check as to why this won't start anymore?

Where the patches applied to the correct ORACLE_HOME?
Have you verified the contents of listener.ora and tnsnames.ora file under $TNS_ADMIN directory? Running AutoConfig should usually fix those files (assuming it completes successfully and you have proper entry in the /etc/hosts file and your FND_NODES table entries are correct).
How to get a clean Autoconfig Environment ? (Doc ID 391406.1)
Thanks,
Hussein

Similar Messages

  • AS Java applications not starting after patching from 2004s SPS10 to SPS11

    Hi folks,
    after patching our NetWeaver 2004s from SPS10 to SPS11 and the Kernel from 7.00.83.0 to 7.00.95.0, the applications on the AS Java do not start up automatically any more.
    Under the following URLs, the same error is shown:
    http://<fully qualified host name>:51000/
    http://<fully qualified host name>:51000/nwa
    http://<fully qualified host name>:51000/sap/monitoring/SystemInfo
    http://<fully qualified host name>:51000/useradmin/
    http://<fully qualified host name>:51000/wsnavigator
    http://<fully qualified host name>:51000/uddiclient
    503   Service Unavailable
    SAP J2EE Engine/7.00
    Application stopped.
    Details: You have requested an application that is currently stopped
    http://<fully qualified host name>:51000/webdynpro/welcome/Welcome.jsp
    itself works, the two links Content Administrator and Web Dynpro Console both lead to the same 503 error described above
    On http://<fully qualified host name>:51000/irj, the error message is different:
    com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
    Application sap.com/com.sap.portal.fpn.accessservice cannot be started because is in MANUAL start-up mode..
    Exception id: 09:33_09/05/07_0003_102709250
    See the details for the exception ID in the log file
    In std_server0.out we have the following entries, right after the list of all services that were started:
    ServiceManager started for 39904 ms.
    Framework started for 46720 ms.
    SAP J2EE Engine Version 7.00   PatchLevel is running!
    PatchLevel January 31, 2007 18:37 GMT
    May 9, 2007 9:40:19 AM  com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_3] Fatal:
    The last line with com.sap.portal.prt.sapj2ee.error is listed another 131 times, and there is also the following message:
    ### Excluding compile:  com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
    We can connect to the system using Visual Administrator. Under Server->Services->Deploy, most applications are not running. It is possible to start a few applications manually, others however do not start showing different exceptions.
    We have AS ABAP and AS Java installed, as well as BI, DI, EP and EPC. AS ABAP seems to be running fine.
    We have also noticed the following deviations in JSPM:
    BC_FES_IGS is Release 7.00 SP Level 7.0
    EP_BUILDT is Release 7.00 SP Level 10.0
    SAP_BUILDT is Release 7.00 SP Level 0.0
    All other components except for the Kernel are Release 7.00 SP Level 11.0 or 11.2
    What could be wrong, and what can we do to solve it?
    Best regards,
    Robert Schulte

    Thanks for your response, usha rani
    1. We already tried that, unfortunately, it does not help
    2. We checked the kernel version thoroughly after you suggested it, everything seems to be fine. We had a Unicode kernel before, and we still have one.
    3. safemode is already set to NO
    4. J2EE's default.trace is full of exceptions, but none of them is pointing me into a helpful direction.
    Perhaps the exceptions mean more to someone else:
    java.lang.Exception: Exception loading and instanciating sub-manager:
    com.sap.caf.km.repositorymanager.CAFSecurityManager
    (java.lang.ClassNotFoundException: com.sap.caf.km.repositorymanager.CAFSecurityManager)
    com.sapportals.wcm.repository.runtime.CmConfigurationProvider#
    sap.com/irj#com.sapportals.wcm.repository.runtime.CmConfigurationProvider.Component
    <SetRoomIdForDiscussionObjects> will not be available.
    Failed to load class
    <com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager>
    #J2EE_GUEST#0####1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22
    ##0#0#Error##Plain###
    java.lang.ClassNotFoundException:
    com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager
    com.sap.portal.prt.runtime.broker#sap.com/irj#
    com.sap.portal.prt.runtime.broker#J2EE_GUEST#0####
    1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22##0#0#
    Error#1#/System/Server#Java###
    [PortalServiceItem.startServices] service initialisation failed:
    tc.eu.odi.conn.uwl|OdiBridgeService
    [EXCEPTION]
    {0}#1#com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException:
    Could not instantiate implementation class com.sap.tc.eu.odi.conn.uwl.OdiBridgeService
    of Portal Service tc.eu.odi.conn.uwl|OdiBridgeService because: could not load the service
    com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
    Application sap.com/com.sap.portal.fpn.accessservice cannot be started
    because is in MANUAL start-up mode.
    There are many more entries in default.trace.

  • Concurrent Manager not starting after patching/ cloning

    Hi,
    We have an issue where after cloning and/or patching an environment the concurrent manager doesn't start. Our steps to resolve this problem have thus far been as follows:
    1. Apply 3830807
    2. Run autoconfig
    3. Run cmclean.sql on environment
    4. Check the libc* files in 8.0.6 ORACLE_HOME/lib/stubs
    We had an instance after a patch was applied where the conc mgr did not start and we applied all of the above, in that order. No success. We then decided to apply the 3830807 patch again and run autoconfig- basically re- run steps 1 and 2. Success. In another instance, running the cmclean.sql resolved the error. In some instances, simply shutting down the application and DB and restarting will be enough.
    Our problem is that the resolution to this error always seems random. What may work in one instance almost never works in another. Additionally, the problem has started since we've applied ATG RUP 6 to our LIVE environment and our clones. Coincidence?
    We have logged an SR but I feel like we're being spun in circles- I'm not getting a direct answer or resolution path from them.
    If someone could provide some guidance on a proper resolution path for this conc mgr issue I would very much appreciate it.
    Thanks,
    Lia.

    Basically the approach we're now taking (and that's working) is that after applying a patch, or set of patches, we apply patch 3830807 and then run autoconfig on the db and apps tier. We then shut down the application (if not already down) and the database and then bring everything back up.
    Thanks to all for their assistance.
    Lia.

  • Listener not starting after restart

    Hello,
    After rebooting my Windows PC yesterday, I can't get the Listener to start. I've read every post I could find on this and nothing has helped so far.
    When I try to start the listener on the command line, I get this error:
    C:\Documents and Settings\rws5997.IPCO>lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-SEP-2009 09:24
    +:26+
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Starting tnslsnr: please wait...
    Failed to start service, error 0.
    TNS-12560: TNS:protocol adapter error
    When I check the listener status I get this:
    C:\Documents and Settings\rws5997.IPCO>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-SEP-2009 09:19
    +:14+
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=C0104454)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    +32-bit Windows Error: 61: Unknown error+
    Here is my listener.ora file:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (ADDRESS = (PROTOCOL = TCP)(HOST = C0104454)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    And here is my hosts file:
    127.0.0.1 localhost
    192.168.1.1 C0104454
    Any ideas would be appreciated!
    Richard

    Hi Richard,
    why would you set the ORACLE_HOME variable in your OS environment anyway?
    If you want to switch between different Oracle Homes you might want to look at the "Oracle Locator Express" from DbMotiveTools:
    http://daust.blogspot.com/2006/03/xe-oracle-home-selector.html
    Really helpful, especially if you have multiple Oracle environments on your box.
    Regards,
    ~Dietmar.

  • Apache Web Services Listener not starting after bouncing application

    Can some one please help? I am runnng 11.5.10.2 on Solaris.
    ==========
    Problem:
    ==========
    I can not start my Apache Web Services Listener via ADSTRTAL.SH (log filed saved with 0 (zero) bytes – so no results to look at).
    I also tried to start it using the adapcctl.sh start as the applmgr user and I get the same error as adstrtal.sh.
    I ran apachectl configtest and got “Bus Error”
    ==========
    Question:
    ==========
    How do I fix this problem (bus error and get Apache listener to run)?
    -OR-
    Where do I go to edit this file and is it the http.conf file?

    Problem solved, disk drive was full.

  • Jdeveloper does not start after patch update

    Hi all,
    I just installed the latest patch for jdeveloper, and I am having a problem starting the IDE. The splash screen displays, and that is it. When I run jdev from console, I get a bunch of error messages -
    java.lang.NoSuchMethodException: oracle.jdevimpl.vcs.generic.profile.ActionInfo.
    addHelpTopicId(java.lang.String)
    at java.lang.Class.getMethod(Class.java:1581)
    at javax.ide.extension.DynamicHook.findMethod(Unknown Source)
    at javax.ide.extension.DynamicHook.attachData(Unknown Source)
    at oracle.jdevimpl.vcs.generic.esax.VCSHookHandler.attachData(VCSHookHan
    dler.java:231)
    at javax.ide.extension.DynamicHook.end(Unknown Source)
    at javax.ide.extension.spi.SAXManifestParser$Handler.endElement(Unknown
    Source)
    at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingPa
    rser.java:1310)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
    ngParser.java:328)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
    arser.java:295)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
    at javax.ide.extension.spi.SAXManifestParser.parse(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.loadExtension(Unknown Source)
    at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtension(Extension
    ManagerImpl.java:331)
    at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.initialize(Unknown Source)
    at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
    agerImpl.java:763)
    at javax.ide.Service.getService(Unknown Source)
    at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(Unknown So
    urce)
    at oracle.ide.ExtensionRegistry.getOracleRegistry(ExtensionRegistry.java
    :81)
    at oracle.ide.IdeCore.startupImpl(IdeCore.java:1049)
    at oracle.ide.Ide.startup(Ide.java:674)
    at oracle.ideimpl.Main.start(Main.java:49)
    Any help pls ?
    Thanks,
    Kunle.

    More discussion on this here -> http://forums.oracle.com/forums/thread.jspa?threadID=398360&tstart=0
    The simple answer is that the SU4 update contains an extra jar which is not needed.
    If you go to the jdev/extensions directory and rename oracle.jdeveloper.vcs.10.1.3.jar to oracle.jdeveloper.vcs.10.1.3.jar_old, then rename oracle.jdeveloper.vcs.10.1.3.jar.backup to oracle.jdeveloper.vcs.10.1.3.jar jdev will start correctly. A bug has been logged for this, and we will correct it as soon as possible.
    Thanks,
    Geoff

  • Ciscowork 3.2.1 daemon manager is not working after patch installation

    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    Please suggest.
    With Regards,
    neena

    During installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
    Following message will be seen in /log/syslog.log
    Daemon manager anonymous user has not been set up: 00000775
    To solve the issue, run resetcasuser.exe located under /setup.support  to  recreate the settings.
    Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
    Additionally you can try to make casuser a member of adiministrators group.
    -Thanks

  • Ciscowork3.2.1 daemon manager is not working after patch installation

    Ciscowork 3.2.1 daemon manager is not working after patch installation
    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    I reset the casuser password and restarted the service but still no luck....
    Please suggest.
    With Regards,
    neena

    Neena,
    Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out.  The only thing checked should be "Password never expires".  Change anything required and reset casuser.

  • PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade tokenerl  patch65

    Hi,
      When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
      or higher level 67 or71   with JSPM,
      after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
      It's worked before patch level 62.
      Did anybody occur the same problem?
      Can you give me some advice?
      In my WIN2003 server x64, I have the follow DLL libraries:
      Microsoft redistributable runtime DLLs VS2005 SP1(X86)
      Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
      Microsoft redistributable runtime DLLs VS2005(X86)
      Microsoft Visual C++ 2005 redistributable
      Microsoft Visual C++ 2005 redistributable(X64)
      Microsoft Visual C++ 2008 redistributable SP1(X64)
    Edited by: IBM China on Feb 4, 2010 12:56 PM

    >   after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
    Please check your event log and see if you use the current runtime. A new runtime library is necessary to fix an ATL security issue, see
    Note 1375494 - SAP system does not start after applying SAP kernel patch
    Markus

  • Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

    I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
    I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
    I do not use a firewall or virus program.
    My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
    What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
    It is either a Ubuntu problem or a Firefox problem.
    Sonny.

    ''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
    Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
    The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • ITunes 10.1.2 not starting after update

    iTunes will not start after being updated to 10.1.2. Also experienced internet explorer being extremely slow. Tried to repair the installation, but same result. Uninstalled iTunes, restarted the computer, and internet explorer started working again. Reinstalled iTunes from Apple web page. Same result as after update. Everything worked fine before update, no errors during installation.

    I have just had exactly yhe same problem.
    Try this!
    Go to the itunes support page and uninstall / reinstall Itunes + quicktime exactly to the troubleshooting instructions.
    It takes some time and patience but it works on my Vista operating system. Windows 7 should also work as the instructions refer to both systems.

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Windows 8.1 desktop PC not starting after hibernation

    Hi,
    I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
    and such but this new one is hard to figure out without a desciption.
    First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
    I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
    I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
    white text on blue background), I got to a black page with grayish text telling me the following:
    Windows Boot Manager
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your Windows installation disc [...]
    2. Choose your language [...]
    3. Click "Repair your computer."
    File: \Windows\system32\winload.exe
    Status: 0xc000000f
    Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
    It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
    Errors:
    1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
    2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
    I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
    I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
    Sorry if this post is a bit of messed up, that's about how I feel right now... :)
    Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
    Many thanks in advance.

    Hi,
    According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
    Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
    For Windows boot process knowledge, you can refer to the contents of the link below for more details:
    http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
    For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
    Roger Lu
    TechNet Community Support

Maybe you are looking for

  • How do I partition my external hard drive without losing data?

    How do I partition my external hard drive without losing the data already on it? I've been using it with Time Machine on my old computer, but want to use it as a regular drag-and-drop type back up on my new computer. Is there any way to basically spl

  • Payment popup  (NEOS / Ogone ) does not appear in Safari 4.x

    Dear people, We have noticed that the popups with the payment application on our website portal at portal.boip.int do not load anymore. Unfortunately, we can get no further information from Fortis Bank here in the Netherlands. They say it can be solv

  • Invoice Block when Exceeded date limit

    Hi                I want to block pick the item in pick and manger when a customer have any payment due above 60 dates as per posting date, we are following first sale order ---->pick  ----->Delivery ---->Invoice Please give me a solution

  • Hi there, putting movies in ipod classic.?

    Hi all, Can anybody tell if it is possible to put movies or TV programs like Dora the explorer or Spongebob in the IPOD classic. I have them in the itunes library but i cannot transfer it to the ipod it self. Thanks

  • ITunes to Media Player

    How can I change my files to convert to Media Player? I can NOT get my iTunes to play and all of the music that I PAYED FOR from iTunes, is in my music folder but NOT recognized by Media Player. I am TOTALLY ****** OFF! You don't even have a way to c