Condition copy rule..

Dear fnds,
I have created Condition with the combination of S.org and Material (around 2500 records) now i nwanted to change the s.org of all conditon records.
I have down all setting in Copying rule.(Material to material). But when i click on Select rule in Conditon change Screen.system is asking Target material ...ig i try to F8 ,it is giving message Record already Exits.
How can i copy the Condition record
Thanks in advacne
Regards
d\raj\

Hi Raj,
Try with create with reference option in VK11 tcode.
This link should help you:
[SDN|Re: Copy Condition record;
Regards

Similar Messages

When defining copy rules, only one source field allowed

Our users have requested the facility to allow them to copy pricing condition records when in in VK12 transaction. But when configuring the copy rules, we have come across the following problem:
When configuring copying rules for copying pricing condition records,
there is no possibility to use more than one source/target fields.
In our example, the condition table created for a certain pricing
access sequence contains keys such as Sales Organization, Sold-to Party
"and" Product Hierarchies level 1 to level 9 (e.g. PH1 - PH9) .
In the condition table definition, fields PH1 to PH9, although key
fields, are also defined as footer fields. This means that per sales
organization and sold-to party, we can create more than one condition
record based on different combinations of PH1 to PH9.
However when setting up copy rules for conditions in SPRO (SD -
Pricing Control - Copy Control for Conditions) to allow our users to copy the condition records, for a given Source /
Target table, the standard selection screen only allows us to define one Source / Target field.
In our case, this is not helpful. The configurator should be allowed
to select more than one source field (i.e. PH1 and PH2 and ..... PH9). At this moment,
we can only select as source field PH1 or PH2 or PH3., etc..
Steps for the Reconstruction:
- Run Spro.
- Select SD --> Pricing --> Pricing control --> Copy control for conditions -- > Copying rule for conditions
- Select 'New Entries'. Selection screen is displayed. The issue is that in this selection screen, the configurator is allowed to select only one source field. He should be allowed to select multiple fields.
Can you help us with this problem please?
Your help is much appreciated!
Edited by: C. Hassink on Feb 2, 2008 3:50 PM
Edited by: C. Hassink on Feb 2, 2008 3:52 PM
Edited by: C. Hassink on Feb 2, 2008 3:53 PM
Edited by: C. Hassink on Feb 2, 2008 3:55 PM
Edited by: C. Hassink on Feb 2, 2008 3:56 PM

Hi Ralph,
I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
What do you think of the following idea to solve the issue a totally different way:
All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
Regards
Robert

Copy rule

Hi
What is "copy rule" in condition record? How to use it.
Thanks in advance

Copy rule for conditions determines:
1. Which source condition type can be copied to a target condition type.
2. Which table in the source condition type can be copied to which table in target condition type.
3. Requirements and limitations.
Source and target field serves as copy strategy, standard system only predefined two: from customer to customer(s), from material to material(s).
As an example, you want to define a rule to make it possible to copy PR00 (rarely happens): Go to pricing - pricing control copy control for conditions - Copying rule for condition types VB(C. Then add new entry: source condition type PR00 and target PR00.
Then we go to VB(B to set the rule which table in access sequence of PR00 can be copied. since access sequence is pr02 containing tables 304,305, 306. We pick from table 305 to 305, field KUNNR to KUNNR, so that condition record 305 can be copied form a customer to another customer(s). We can set default rule for the table as well.
This is not in real business, only a logic for you to understand..

How do you copy a conditional format rule down successive rows in a Numbers spreadsheet, maintaining continuity between two values within the same row?

I have a spreadsheet with multiple rows and I want to copy a conditional format pattern on each row.
e.g.
Condition: row 1/col A (A1) = row 1/col BC (BC1). Conditional Format: Italic, Fill Green. Now I want to copy that to succeeding rows in my spreadsheet.
A2 = BC2 => Italic, Fill Green
A3 = BC3 => Italic, Fill Green ..... and so on.
I should be able to drag the format down through the spreadsheet, with the BC column increasing (2, 3, etc.) along with the A column, but that does not happen. if I try to drag the format through the spreadsheet, the BC column remains locked on BC1. You have to physically go into each iteration and change the BC column iteration. This is one major difference between Numbers and Excel. Never had the problem in Excel. I prefer Numbers, and that is why Im looking for help in this matter. Thanks much.
Eugene O'Connor

Hi Eugene,
This is the designed behaviour in Numbers. To register your desire for a change, Provide Numbers Feedback, using the link in the Numbers menu (in Numbers), or using the link in this message. Make a Feature Enhancement request.
There is a bit of shortcut in editing the cell references in the rules you have now:
Select all of the cells that will contain this rule.
Set up the rule for the first (A1), using BC1 as the cell reference.
Set up your table (hide columns) so that you can see both columns (A and BC ) while the Conditional format rules dialogue is open.
Starting at A2, use this loop:
- Click the BC1 reference in the rule to select it.
-Click on cell BCn in the table.
-Click the Edit button twice (toggles to Done, then back to Edit).
-Press the down arrow to move to the next cell.
-Repeat.
An even shorter method is to add a column before or after column A, use a formula to test if A1=BC1, etc. (which will increment as you fill down), then set the conditional rule for that columns cells to
Text is TRUE
Set default text colour to white, and conditional text colour to match the conditional fill colour. This will flag the cells matching your condition by colouring the adjacent cell (and hide the text by matching the background colour in both default and conditional modes).
Regards,
Barry

Material Master: Copy rule for purchase variant prices

Hello together,
in the material master (transaction MM42) on variant level the purchase prices can by copied from the generic article to the variant; for this a copy rule can be applied; one of the copy rules can be selected an be used.
Now, the customer would like to copy additional conditions, such as freight, to the variants.
Is it possible to implement an own copy rule? Is there any Badi or user-exit?
Thank you for your information in advance.
Best regards,
Kurt.

Any answers ?

Creating a conditional format rule dependant on adjecent cell

Hi,
I am trying to create a conditional format rule that changes colour dependant if the number in the cell is equal to, greater than or less than the number in the adjacent cell. I get that I can create a cell reference in the format rule (cell c2 is "greater than B2" for example) - but when I try to copy paste the style down the column, it references the first cell (B2) always. It leads me to having to change the rule individually. Is there a quick way of creating a conditional format rule that is dependant in the adjacent cell, and copy it along the whole column. I hope I have made myself clear!!
Thanks

you can make a secondary table that performs the conditional test, shades a cell and is slide behind the original table to do the shading:
The formula in the table on the right (the "Shader Table") is:
B1=IF(Original :: B1>Original :: A1, "H", IF(Original :: B1<Original :: A1, "L", "E"))
B2=IF(Original :: C1>Original :: B1, "H", IF(Original :: C1<Original :: B1, "L", "E"))
select B1 and B2, then fill down
Now select the range of cells B1 thru C9 and apply conditional formatting as shown.
Select the table "Original" and make the fill for the table "None" so that it is see through. Now send the "Shader Table" to the back by using the menu item "Arrange > Send To Back" then slide the table under the "Original" Table

Paste Conditional Format rule wipes out existing formula... & vice versa.

As far as I can see there is no way to copy an already established conditional formatting rule onto a cell that already has a formula entered without wiping out the formula. And when you set the formatting rule first and then paste in the formula, it wipes out the conditional formatting rule.
Surely this is not too much to ask -- or am I missing something here?

Badunit, thank you for the info about Paste and Match Style. That works very nicely. Interestingly, I don't believe the specific use of the command for this purpose is documented in the manual, though it certainly should be.
Yvan, I have read everything the manual has to say about conditional formatting three or four times over, and yes, I know that the function is available via the Inspector as well as under the Format menu.
You are mistaken, however regarding copy and paste.
Conditional formatting is indeed transferrable via copy and paste, as you will find if you try it, and as is mentioned in the manual at the bottom of page 82. And pasting a function into a cell with conditional formatting deletes that formatting. So Badunit's suggestion is the only solution to avoid having to re-enter either the formula (very large) or the formatting rules. In this instance there were 14 rules in force, and re-entering them was tedious.
A little less rushing to judgement - and a little more courtesy, please.

HT4648 So if you import a numbers document from a mac to iPad which has a conditional format rule such as a cell with a score between 1-10 fills with the colour black will still work on the iPad? Not being able to edit it just means you can't change this

I want to use numbers on my iPad mini for a team I coach. I have a spreadsheet on my mac I want to import onto the iPad mini for players to enter in wellness ratings. On this spreadsheet (on the mac) I have a conditioning formatting rule that when a player enters in their numbers the cells fill with black so others can't see their entries (to maintain privacy). Will this function import across onto iPad numbers? From the discussion I saw on this site it only partly answers my question stating "it cannot be edited" does this mean the conditional formatting rule cannot be changed and therefore will still work or the whole spreadsheet can't be edited and you can only view the spreadsheet and make no new entries to it?

Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

Header Text Of The PR to PO creation: Header Copy Rule

Hi Friends,
Is there any workaround to set copy rule at header note of PR . As standard sap, there is no header text rule available; may be multiple PRs can be converted into single PO. But I still needed this functionality as there would be only PR has to be converted into single PO.
Which bapi / exit can be used for this functionality . I need to reflect the header text of the PR into PO Header auto.
Regards,
Lalit

hI,
There is no user exist available to get header text in the PO as per my knowledge.I had similiar kind of requirement ,at that time I dird the research for the same.
Regards,
Nitin Amritkar

Conditional copy of payload attributes after HT

Hi,
How can I conditionally copy the payload attributes after the execution of a HT.
Say that I have an attribute in my payload named hasAtlestOneCustomerAcceptedOffer and I have a Parellel gateway where I create multiple tasks in parellel.
I want to copy the value of this attribute only when it is "Yes". I looked at teh data associations but couldn't be sure about how to do it ..
I am using 11.1.16
Thanks

Hi --
You have to use the XSLT 'if' or 'when' constructs - you can find examples here:
- http://www.w3schools.com/xsl/el_if.asp
- http://www.w3schools.com/xsl/el_when.asp
Hope this helps,
Fernando

Copying Rules

I have two BM servers. I am using iManager to maintain those servers. Is there a way to copy just one rule from one servers configuration to another, so I don't have to retype all of the entries that are in the rule?
Also, is there a way to take a text file and either import that file into a rule or is there a way to copy and past mulitple websites from a text file, like there was in NWAdmin?
Thanks,
Ken

In article <[email protected]>, Melnikok wrote:
> I have two BM servers. I am using iManager to maintain those servers. Is
> there a way to copy just one rule from one servers configuration to
> another, so I don't have to retype all of the entries that are in the
> rule?
BM 3.9, correct? Are you at sp1? You can copy and paste rules from one
server to the other with both versions, but the sp1 patch (iManager plugin
updates) makes it a lot easier to copy rules and proxy configs.
I don't know that you can copy just a single rule though.
If you are careful, when you export the rules to a file, you can edit the
resulting xml file with a text editor and insert (or delete) a rule.
>
> Also, is there a way to take a text file and either import that file
> into a rule or is there a way to copy and past mulitple websites from a
> text file, like there was in NWAdmin?
>
Again, manually modifying a saved xml file would probably be the thing to
try.
For the easiest way, by far, of adding lists of web sites into a rule, you
want to use LinkWall, which is based on lists of web sites in text
files...
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

JDev hangs when creating copy rule

Hi,
I try to build a simple BPEL prototyp using beta3. Sometimes, when I create a copy rule, jdev just hangs and I have to kill it via task manager (win xp). I suppose this only happens with quite "long" variable names in the expression builder?
Has anyone experienced these hangs?

Hi,
I started trying Beta3 only. Didn't check in Eclipse by now.
My configuration is: win xp SP2 (up tp date), 1GB RAM, BPEL beta3.
I tried to create a copy rule for a variable named: ReadDBParams_ReadParamsServiceSelect_OutputVariable
This freezes jdev all the time. Then I renamed the variable to: ReadDBParams_OUT
This seems to work.
The long variable name doesn't make that much sense, but it was generated by a witard like that, so it should work... :-)

Is it possible to save a set of conditional format rules in Numbers?

I am a doctor, and I have a call schedule that comes out each month (in an Excel spreadsheet). So, I want to open up the spreadsheet in Numbers and have each instance of my name (Smith) highlighted, by setting the background of the cell to a fluorescent yellow. This is easy to do by using conditional formatting, and it works well.
My problem is that each time I want to use the same conditional formatting rule, I have to manually set it up. I would like to be able to save the 'rule', ideally linked to a toolbar button, so that I can run this conditional formatting on any Numbers spreadsheet with one (or two) click(s).
Does anyone know if this is possible?

Create a table with the conditional rules then use Format > Advanced > Capture Table
Each time you will create a new table from the captured table it will have all the source's attributes.
Of course, you must save in the native Numbers format.
If you export as Excel most of these settings will be lost.
Yvan KOENIG (from FRANCE vendredi 9 janvier 2009 19:44:05)

Copy rules from agreement into external service

Hi guru,
when I input the agreement/item in the 'maintenance order external processing operation' mask, the system replaces the pre existent purchasing group with the one of the contract, issuing the meassge 'Data copied from contract' (Message no. IW381
This is undesired behavior: is it possible to change the copy rule?
Thank you in advance.
BR,
Vince
Edited by: Vincenzo Guastadisegni on Sep 28, 2010 2:09 PM
Edited by: Vincenzo Guastadisegni on Sep 28, 2010 2:15 PM

thanks for the Reply However i have not defined anything in material direct
Here is the screenshot.
Do let me know if you need any other info. Waiting for Valuable answers.
Best Regards

How to define the copy rules in master contract

Hi,
Could you please help me on how to define the copy rule in master contract . I cann't find the link,it's not under IMG/SD/sales/contract/master contract/define referencing prodecures.
Thanks/Cindy

Hi Sai,
I'm afraid VTAA may not resolve my problem. What I want is to define the copy rule. When you go into IMG/SD/sales/contracts/master contract/define referencing requirments/define reference procedure you will find there is a copy rule in field area. What I really want is to define that copy rule.
Thanks

Condition copy rule..

Similar Messages

Maybe you are looking for