Condition populated twice in the item conditions in the sales order

Hi,
We are creating the sales order through .csv flat file. The program calls the relevant BAPI which creates the sales order. It also fills the amount from the file for the manual condition type YNET in the pricing procedure. YNET is defaulted automatically in the sales order. But maintaining value is not mandatory.
The problem is in sales order, YNET is displayed twice in the item conditions.
One YNET with no value and another YNET with value which we passed through file.
Any suggestions how we can get only one YNET in the item conditions in the sales order or how the value from our file can be added against the YNET in the pricing procedure with showing another YNET in the item conditions in the sales order
Thanks in advance,

Hi Ramakrishnan,
Thanks for your reply. Its a manual condition type. No condition records maintained.
Thanks,
Ram
Original thread:
Hi,
We are creating the sales order through .csv flat file. The program calls the relevant BAPI which creates the sales order. It also fills the amount from the file for the manual condition type YNET in the pricing procedure. YNET is defaulted automatically in the sales order. But maintaining value is not mandatory.
The problem is in sales order, YNET is displayed twice in the item conditions.
One YNET with no value and another YNET with value which we passed through file.
Any suggestions how we can get only one YNET in the item conditions in the sales order or how the value from our file can be added against the YNET in the pricing procedure without showing another YNET in the item conditions in the sales order
Thanks in advance,

Similar Messages

  • How to update the condition price in the sales order for all the items

    Hi,
    How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
    Thanks,
    Balaram

    Hi,
    There is a change in the requirement.
    Scenario:
    I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
    For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
    Thanks.
    Balaram

  • How to hide the Condition types in item condition screen in Sales Order ?

    Hi Experts,
    We got new requirement from the Client. Pricing Condition types  are ZZBG, ZPBG, ZPBA, ZFSG, ZBDG and ZBHG part in Pricing Procedure. These condition types have Condition records. These need to be hidden in Item conditions screen in Sales Order but other status of the conditions remain unchanged. Pleas provide me the solution earliest  How this we can achieve in a best way.
    Best Regards,
    Srikith

    Hi Srikanth,
    You can achieve this using CONDITION EXCLUSION.
    Maintain Condition exclusion for first condition type its Exclude the condition types which are below to that.
    You must set a condition exclusion indicator for the price. You can do this in two ways:
    If you want to set the condition exclusion indicator a follows then you specify it:
    1..for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
    2.for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
    Hope this will helps you
    Dasaradha

  • Inserting Pricing condition in Sales order when saving the sales order

    Dear ABAPers,
           My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
    In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
    How to do this.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    I have Solved this Problem.
    Thanks & Regards,
    Ashok.

  • Condtion value is not appearing in the sales order conditions tabpage

    Dear Gurus,
    I have Created the sales order and the price is taken from conditions record but the condion value Shown for the condition type is blank .
    please do the needful to resolve the issue
    Regards
    Anil

    hi,
    if the condition record maintained matches the order based upon the key combination you maintained then it will flow into the order. If not, check the validity of the condition record you maintained at VK13, also make sure its not deleted. If you feel everything is correct with condition record then go to VA02 > item > conditinos > click the analysis button. It will tell why the conditino record was not picked into the order. reasons can be there is a susbsequent pricing condition, requirement not met etc.
    regards
    sadhu kishore

  • Condition value of JMOD not appearing in the sales order.

    Hi all,
    Im encountering a peculiar situation where the conditon value of JMOD is not showing up in the sales order..It is however showing the tax rate.. Pls suggest.
    thanks and regards
    Joe

    Hi joseph
    some soution for you I googled for you
    one example like yours i am just copying and providing info for you i dont know whether i can copy link or not here
    here is the solution
    I'm using TAXINJ procedure with JFACT as the pricing procedure for sales.
    Here, I've maintained in FTXP, for IN00 and taxcode V1(new one defined),
    taxes as desired and JMOD = 16%, AED as 2%.
    But these values are not getting picked up in the pricing in sales order.
    I'm keeping UTXJ correctly. I tried with % of UTXJ with 100%.
    In the pricing analysis, I see that the condition record for JMOD is found correctly with 16%.
    But it appears in the condition items as 0%
    solution:
    Check whether you have maintained the tax classification in material master and also check whether u have defined the same tax classification in VK11 for UTXJ, where u assign the Tax code.
    Also check for customer tax classification. And check what you have maintained in J1ID. System will first search for values from J1ID, and then in FTXP.
    And have you a sales pricing condition like JEX2 which is a copy of JMOD ? The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly - account key EX2.
    I'm maintaining TAX classifications correctly in the material master, customer master and final tax classification for plant also is set correctly.
    As I told, JIN1, JIN2, JIN4,JIN5 are picked up correctly and calculated. Problem is only for Excise.
    And these values are getting copied initially, before I put PR00 manually.
    Once I put PR00, all the conditions are set to zero back
    Then after entering the price manually, u do the update pricing in Conditions View.
    See, I have not altered any thing in the standard JFACT procedure. That means sales condition is there for JMOD to enable account posting..
    Now, I've changed Tax category in OVK1, and put UTXJ alone there and now, JMOD is getting picked up and is calculating the value..
    But note that I've maintained 10% as JMOD in FTXP.. and 8% in the J1ID excise rate maintenance for chapter ID.
    Can I do away with Excise rate maintenance for chapter ID. So that I will get the % maintained in the FTXP..
    did the tax code pick up correctly... did u maintain the chapter Id and excise rate fro teh chapter ID
    I could solve the proble..
    In the excise group assigned to the plant, I had to check on the indicators, SED and AED.
    Hope its clear your issue.
    Regards,
    Krishna.

  • Conditions Tab should not be displayed in the sales order.

    Dear Gurus,
    My client wants to hide the conditions tab (header & item) in the sales order while in display mode.
    Because his dealers should be in a position to see the pricing strucutre.
    Pl guide me how to do this with transaction variant.
    Thanks & Regards,
    Sreehari

    You can create a transaction variant for VA03 and hide the tabs using SHD0.  You can also assign it to a separate transaction code if it meets your requirements.

  • Condition type not flown(not determined) into the sales order

    Hello Experts,
    There is one discount condition type which is having proper condition records, validity date.However, it is not getting determined properly and is not flown into the sales order. the user wants to know why this may happen.I tried to reason it may be the sales order date and the conditon record date may be different or the condition record is changed after the creation of the sales order.neither of the reasons seem to hold good. any ideas?
    Regards,
    Raj

    Hello,
    I have looked into the analysis and asked him to update the condition by clicking on that.also, I found that the condition record is having a proper valid date. now the user would update only after knowing the exact reason why it did not flow into the sales order,he knows he has to update the condition but would not do so till he knows the right reason why condition is not determined in the sales order. now this is the situation.
    the probable reasons as per analysis of the conditon type are as follows(for your information). can it be one ofThere are different reasons for this:
    1)The condition was deleted manually in the item condition screen.
    2)The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.  them?
    Regards,
    Raj.

  • Condition value getting changed when open the Sales order in VA02

    Hi Experts,
    i have creating Sales order manually in VA01, and for first line item of sale order, i have assigned value in custom field of additional tab B, to populate Condition value for condition type ZK01 and checked in VA02, VA03 same Condition value is there for condition type ZK01.
    And created delivery document and billing document for newly created Salesorder.
    When i have open the Sales order in VA02, then i am getting changed Condition value for conidition type ZK01 in bothe header and first line item and in VA03 there is no change in value.
    Kindly let me know the user exit or any related programs to this issue.Thanks in Advance.

    Hi Rajani,
    this sound like VOFM -> conditions. Do you know which conditions are active during the determination?
    Cheers,
    Stefan.

  • How to update the condition price in sales order while creating the invoice

    Hi,
    How to update the condition price in the sales order to carry out the new price while creating the invoice?
    While creating the invoice it should update the condition price in sales order.
    Thanks,
    Balaram

    No, pricing is not there in delivery.
    I found an exit for VF01transaction where we can update the price in order.
    Can you please tell me how to update the price if I have the order, material numbers and conditions number?
    Thanks,
    Balaram

  • To populate condition in the sale order or a scenario in the USER Exit

    Hi Experts,
    I want to write the code in the USER EXIT to add a condition type in the Sale order when the ship-to-party address is changed in the transaction level from the address maintained in the Master data,
    So can anyone let me know is there any function module or how will i populate condition type.
    I found that the internal table XKOMV contains all the condition types.
    Thanks,
    Prem

    i saw the answer provided by u, i was pleased to find the answered way, so i writing back to u regarding my requirements.
    my requirement.
    while creating sale order, before entering the screen 4001 where we enter sold to party and material and order quantity, i need to populate these fields from my exit.
    i am able to populate the sold to party field from the exist  EXIT_SAPMV45A_002 and
    INCLUDE ZXVVAU04 .
    in the same fashion i need to populate my material filed.
    how do i do it

  • How to use a purchase condition in the sales order

    Hello,
    Customer would like to have a purchase "day-price" appearing in the pricing of the sales order. 
    I would suggest to write abap code (reading the correct PU condition record) in a condition base value routine that would be added in the customizing pricing procedure at SD side.
    Is there any "more standard" solution for this ? 
    Thanks,

    Hello,
    Here is the case in more detail :
    This question concerns a product that is just purchased, stored, and sold.  The purchase-price is based on a "day-price" that is maintained in a purchase condition record on a daily basis.  The sales-price should be that daily price with a markup in %. 
    So, in the sales order, this purchase condition record should be picked up with the material and the pricing date as key.  From that base price, a markup can be calculated in sales pricing. 
    I would suggest to use the field "condition base value" in the setup of the sales pricing procedure (Ref to IMG sales and distribution, pricing control, define and assign pricing procedures).  In that field a new routine could be entered that (with a select or function or Bapi) picks up the purchase condition record-value. 
    I would like to know if this would be a "correct" way of solving this requirement,  if there is no "more standard" solution,  if anyone has experience with a similar requirement and how you solved it ?
    Thanks,

  • Fm to change the condition value in sales order pricing

    Hi Friends,
    I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
    Can someone please help me. I've been stuck with this for quite sometime.
    Thanks,
    Dikshitha G

    Try these BAPI's
    BAPI_LISTING_CONDITIONS,
    BAPI_AGREEMENTS
    Regards,
    Rajasekhar Reddy.

  • How to limit the number of price conditions in a sales order

    Dear experts,
    We've created discounts in our pricing procedure, and they are added manually. They have a maximum.
    But the problem is that the user can add several discount price conditions in the sales order!
    Is there any customizing to limit the number of occurrences to 1 in the pricing procedure?
    Thank you for your help
    Marjolaine

    HI,
    You can make use of feature to maintain maximum and minimum limits per condition type.
    SPRO > SAP Implementation Guide > Customer Relationship Management > Basic Functions > Pricing > Define Settings for Pricing > Create Minimum/Maximum Limits
    In this activity you can restrict manual processing of pricing conditions in transactions using minimum and maximum limits per condition type.
    Kindly reward with points in case helpful
    Sharif

  • Flow of condition records in the sale order

    Dear All,
    I had created two condition types (ex : RL1 & RL2) for Royalty exp and Royalty Payable, these are Required Fields. so that whenever user create the Sale order those condition types amounts are automatically fetch into the sale Order with plant and material combination through condition record.
                                        But the requirement is user will maintain condition record for the first condition type (ex : RL1) only, at the time of creating the Sale order the second condition type(RL2)  amount should automatically  flow into the sale order along with the first condition record (RL1). i.e., what ever the amount maintained in the first condition record(RL1) should copy into the second condition type(RL2).
    Note : User will not maintain condition record for the Condition type (RL2).
                                 Other than Condition supplement, Please suggest me how to meet the Client requirement.
    Awaiting Reply,
    Thanks&Regards,
    Lakshmi

    Hi,
    First Condition Type (RL1) is a surcharge  and   Condition type (RL2) is discount.  after placing RL1 condition in RL2 condition element details screen as a Ref.Condition Type. I maintained the condition record for RL1, in the Sales order second condition Type is automatically picking with positive value(where as second condition RL2 is a discount) that should not it has to show the negative value .
    Give me suggestions to meet the requirement.
    Regards,
    Lakshmi narayana

Maybe you are looking for