Condition satisfied but still workflow determined it as false

in mss workflow one condition is satisfied but still it has taken it as false in that condition step
what can be the reason for this

Most probably the value was not set when the condition was checked. I would suggest to use container element binded to attributes of Business Object before using the condition step.
This will give visibility what was the value before the condition step was executed as the attribute value may get updated after condition step.
Thanks
Arghadip

Similar Messages

No condition maintained for Order Confirmation output type but still active

Hi,
I have NOT maintained any Condition record for Order confirmation Output(BAFX) but still it is generated and Fax instruction is being sent to the Sold to Party. Also i found that NO condition record for Order confirmation output(BA00) is also maintained but still Order confirmation is still being triggered.
Actually i want that NO Fax instruction is to be sent for Order confirmation for some of the customers.
Kindly advise.
Thanks,

Hi vk@sap,
Check in the output analysis how the output was determined, so that you can know why they're still determined.
Thanks,
Mariano.

Workflow in Error state in SWI1 tx, but still table is updating as usual, weird!!

Hello,
We have a custom workflow, z_workflow.
In this z_workflow, its calling a custom FM, z_fm.
In this z_fm, I'm updating a custom tbale, z_table.
Before writing UPDATE z_table, I am locking this z_table by using 'ENQUEUE_E_TABLE', as below,
Pls. note this workflow is triggering in BACK GROUND by WF-BATCH user
CALL FUNCTION 'ENQUEUE_E_TABLE'
                  EXPORTING
                    mode_rstable   = 'E'
                    tabname        = 'Z_TABLE'
                  EXCEPTIONS
                    foreign_lock   = 1
                    system_failure = 2
                    OTHERS         = 3.
                IF sy-subrc = 0.
                  UPDATE z_table
                   SET matnr = ls_mara-matnr
                          descr = lv_text
                    WHERE ref_id = ref_id.
                  CALL FUNCTION 'DEQUEUE_E_TABLE'
                    EXPORTING
                      mode_rstable = 'E'
                      tabname      = 'Z_TABLE'.
                 ELSE.
                     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. =====>
==> If the lock is failing an an ERROR / 'E' type message is occuring, but still the 'Rest of the code blocks' are executing normally (where in 2nd_z_table is updating), but the workflow is ending up in 'Error state' in SWI1 (workflow log) transaction, our users who are monitoring this workflow thinking that the transaction went bad, but again they noticed that the 2nd_z_table is updating as usual!!
                ENDIF.
                Rest of the code blocks ==> here another custom tbl, 2nd_z_table is updating
Our workflow expert said that, the error is occuring, well, but as its (z_fm) calling from / by back ground workflow user, hence the 'Rest of the code blocks' are triggering normally and the 2nd_z_table is updating as usual, but overall the workflow ends up in error state!
To avoide this confusing situation (workflow in error, but rest of the code blocks are executing normally), workflow expert suggested the below approach (raising of EXCEPTION in z_fm instead of ERROR message), pls. suggest me is it OK / safe / works good for me?
DO 10 TIMES. => Workflow expert asking me to add all these blue lines to my code
                CALL FUNCTION 'ENQUEUE_E_TABLE'
                  EXPORTING
                    mode_rstable   = 'E'
                    tabname        = 'Z_TABLE'
                  EXCEPTIONS
                    foreign_lock   = 1
                    system_failure = 2
                    OTHERS         = 3.
                IF sy-subrc = 0.
                  UPDATE z_table
                   SET matnr = ls_mara-matnr
                          descr = lv_text
                    WHERE ref_id = ref_id.
                  CALL FUNCTION 'DEQUEUE_E_TABLE'
                    EXPORTING
                      mode_rstable = 'E'
                      tabname      = 'Z_TABLE'.
                  CLEAR lv_locking_failed_on_z_table.
                  EXIT.
                ELSE.
                  WAIT UP TO 1 SECONDS.
                  lv_locking_failed_on_z_table = abap_true.
                ENDIF.
              ENDDO.
              IF lv_locking_failed_on_z_table IS NOT INITIAL.
                RAISE exception_lock_failed. ===> Does the Raising EXCEPTION is solve my problem? pls. suggest me
                RETURN.
              ENDIF.
workflow expert said with this raising of exception will not trigger 'Rest of the code blocks' so that user will be not confused
Thank you

Hi "3SAP"
Yes, your WF guy is correct - raising exception will stall the workflow and not execute to the second table update.
Moreover, second table update logic should be kept inside of the SY-SUBRC = 0 of locking on FIRST TABLE update.
In current case, I cannot say for sure that second table is getting updated in the same call because as soon as TYPE 'E' message is triggered in a background step, standard exception is triggered in the workflow runtime to stop execution - which will NOT execute the code after MESSAGE statement.
As mentioned by Mike, the second table may have been updated from another instance/session/etc but from not this one.
Regards,
Modak

HT1379 My macbook pro 2013 is running to slow even when I am using the keyboard, it running with a delay. I upgraded the memories to 8gb but still slow what can i do to fix it.

Good morning I am confronting serious problems with my Macbook pro 2013, that is runing to slow, even when I am writing this email is running with some kind of delay. I upgraded the memories to 8gb but still running slow . Please let me know what I can do to solve the problem. Thanks in advance. Fernando

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

My ipod 5th G is not recognized by pc but still charging

i've tried a restore uninstalling Itunes or reloading the apple device service but still not working, even the device doesnt recogize the pc
THANKS

Win7
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

My location services is already on as well as with my facebook apps, but still i am unable to check in. what's wrong? even with my maps, it always say location unavailable. help please.

my location services is already on as well as with my facebook apps, but still i am unable to check in. what's wrong? even with my maps, it always say location unavailable. help please.

- The iPod uses the location of a nerby or connected router to determine it location based on a database of routers and their location. It appears that the routers near y are not in Appl'es database. As of yet, nobody here seems to know how to get routers added to the database.
- If you go to Strtbucks. McDonalds or another networks does the location show in the Maps app?

SD: Condition record not getting automatically determined

Hi,
Condition record not getting automatically determined for a condition type for which following access is maintained.
The access has table containing following fields:
Sales Organisation
Distribution Channel
Division
Sales Document type
Sales Document No.
Material no.
Following is the scenario:
A sales order is created for Project Systems attach a WBS element to the line item .
With respect to the above created sales order a Billing request ( a sales doc. type which is different than the above sales order). When the billing request is created materials appearing in the line item will be different.Different materials will appear in the billing request because of the DIP profile maintained.
The prerequisite is that before creating billing request the sales employee has to maintain condition master record with above access.The condition record will combine sales organisation, distribution channel, division, sales document type ,
sales document number ( the 1st refered sales order)
and the material are different
than the ones maintained in the 1st sales order.
This will enable in getting billing request generated without manual intervention in pricing for other materials for which condition records have been maintained as stated above.
Following is the error message we get
===================================
" Inactive X Inactive via formulae of incorrect "
Thanks
Aby
Message was edited by: Aby Jacob Emmanuel

As I know, thats just a warning message(if its a std one).
Ignore it and save.
Check your pricing date of the document. For execution it should be similar or after valid-from date maintain in condition record.
But, you need not create a condition record. Simply change the existing one combination of your desire. But, this warning will come there also for your combination.
Thanks & Regards
JP

When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem.

Output routine fails but still output is issued....Urgent

I have an output routine attached to a output type which generates IDOC. There are different conditions placed in the routine under which SY-SUBRC is made either 4 or 0.
In one of the cases Sy-subrc is 4 but still output is issued and IDOC is generated...
My question is even though output routine is not fulfilled is there a chance of output getting issued on the document ???
Need you help urgently..........

Hi,
Yes the IDOC will be triggered with the different status.
Regards,
Sharath

Can deploy process but not workflow (10.1.3.10 beta)

I tried to deploy several of the demo BPEL processes, but each time the process is deployed successfully, but the workflow is not. Fro example OrderApproval.
I tried setting properties in the build.properties file, but apparently to no avail. Also changing them via the project ant properties did not help.
It looks like the payload JSP did not get deployed -- most of the process works, including the workflow bit, as long as one does not try to look into the worklist entry contents (which gives the 404 Not Found error, same as in the 10.1.2 version when the JSP page is not in the proper directory of hw/worklistexpress).
I noticed some strange behavior in the build properties as stored in the project file (OrderApproval.jpr). There are a lot of equivalent ("fromjdev") entries in the oracle.jdeveloper.ant.AntRunConfiguration hash table. Also, each time after I run a deploy, the value for oc4jinstancename is removed and a corresponding <null/> entry shows up in the file. I tried cleaning up redundant fromjdev entries, but it did not help.
Also hard coding the oc4jinstancename attribute to soademo did not help.
Any suggestions on how to fix the build? See below for a log; I added printing of the deploy attributes to the build.xml file.
Apache Ant version 1.6.5 compiled on June 2 2005
Buildfile: C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\build.xml
Detected Java version: 1.5 in: C:\JDevSOA10.1.3.10beta\jdk\jre
Detected OS: Windows XP
parsing buildfile C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\build.xml with URI = file:///C:/JDevSOA10.1.3.10beta/jdev/mywork/demos/OrderApproval/build.xml
Project base dir set to: C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\bpel
Property ${home} has not been set
[property] Loading C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\bpel\${home}\samples\common.properties
[property] Unable to find property file: C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\bpel\${home}\samples\common.properties
Build sequence for target(s) `validateTask' is [validateTask]
Complete build sequence is [validateTask, deployTaskForm, loadproperty, compile, deployProcess, all, ]
validateTask:
[echo] --------------------------------------------------------------
[echo] // Validating workflow
[echo] --------------------------------------------------------------
[validateTask] url is file:/C:/JDevSOA10.1.3.10beta/integration/bpm/support/files/WorkflowTaskDefinition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
Build sequence for target(s) `deployProcess' is [deployProcess]
Complete build sequence is [deployProcess, validateTask, deployTaskForm, loadproperty, compile, all, ]
deployProcess:
[echo] --------------------------------------------------------------
[echo] // Deploying bpel process OrderApproval on localhost and port 8888
[echo] --------------------------------------------------------------
[deployProcess] Deploying process C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\bpel\..\output\bpel_OrderApproval_1.0.jar
[deployProcess] Successfully deployed the process "OrderApproval" on server "localhost" and port "8888"
Build sequence for target(s) `deployTaskForm' is [deployTaskForm]
Complete build sequence is [deployTaskForm, validateTask, loadproperty, compile, deployProcess, all, ]
deployTaskForm:
[echo] --------------------------------------------------------------
[echo] // Deploying workflow form on localhost and port 8888
[echo] --------------------------------------------------------------
[echo] hostname=localhost httpport=8888 rmiport=23791
[echo] platform=oc4j opmnrequestport=23791
[echo] oc4jinstancename= asinstancename=soademo domain=default rev=1.0
BUILD FAILED
C:\JDevSOA10.1.3.10beta\jdev\mywork\demos\OrderApproval\build.xml:52: Error while deploying the form on server "{0}" Error message :
com.evermind.client.orion.AdminCommandException: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: Connection refused: connect
at com.evermind.client.orion.Oc4jAdminConsole.createCannotConnectException(Oc4jAdminConsole.java:175)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:128)
at com.collaxa.cube.ant.taskdefs.DeployForm.deployOC4J(DeployForm.java:612)
at com.collaxa.cube.ant.taskdefs.DeployForm.deployForm(DeployForm.java:521)
at com.collaxa.cube.ant.taskdefs.DeployForm.deployForms(DeployForm.java:780)
at com.collaxa.cube.ant.taskdefs.DeployForm.execute(DeployForm.java:806)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java)
at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
Caused by: javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:258)
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:126)
... 20 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at java.net.Socket.<init>(Socket.java:365)
at java.net.Socket.<init>(Socket.java:207)
at com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnection.java:645)
at oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSocketRmiTransport.java:58)
at oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java:78)
at oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTransport.java:68)
at com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.java:609)
at com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientConnection.java:153)
at com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.java:137)
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:249)
... 22 more
at com.collaxa.cube.ant.taskdefs.DeployForm.execute(DeployForm.java:818)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java)
at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
Total time: 2 seconds
Snippet from project file:
<hash n="oracle.jdeveloper.ant.AntRunConfiguration">
<url n="buildfileURL" path="build.xml"/>
<value n="outputLevel" v="3"/>
<list n="propertyNames">
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="user"/>
<string v="password"/>
<string v="type"/>
<string v="host"/>
<string v="port"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="asinstancename"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="fromjdev"/>
<string v="opmn.requestport"/>
<string v="admin.user"/>
<string v="platform"/>
<string v="domain"/>
<string v="oc4jinstancename"/>
<string v="hostname"/>
<string v="http.port"/>
<string v="admin.password"/>
<string v="rmi.port"/>
<string v="rev"/>
</list>
<list n="propertyValues">
<string v="true"/>
<string v="true"/>
<string v="true"/>
<string v="true"/>
<string v="oc4jadmin"/>
<string v="welcome1"/>
<string v="oc4j"/>
<string v="localhost"/>
<string v="8888"/>
<string v="true"/>
<string v="true"/>
<string v="true"/>
<string v="23791"/>
<string v="soademo"/>
<string v="true"/>
<string v="true"/>
<string v="true"/>
<string v="true"/>
<string v="true"/>
<string v="23791"/>
<string v="oc4jadmin"/>
<string v="oc4j"/>
<string v="default"/>
<null/>
<string v="localhost"/>
<string v="8888"/>
<string v="welcome1"/>
<string v="23791"/>
<string v="1.0"/>
</list>
<list n="targetList">
<string v="validateTask"/>
<string v="deployProcess"/>
<string v="deployTaskForm"/>
<string v="deployDecisionServices"/>
</list>
</hash>

When I change the rmi ports to 23793 via the project properties and save, they get updated correctly in the .jpr file. However, the deploy still fails, because somehow JDeveloper resets the values back to 23791 (just as it routinely wipes out the oc4jinstancename) and writes them to the .jpr file.
How can I make the new value 'stick'?
I tried changing the port of the LocalBPELApplicationServer from 23791 to 23793 but got:
Error while getting remote MBeanServer for url: ormi://localhost:23793/default:
Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
     javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
When I click on the [+] next to the connection I get this:
oracle.oc4j.admin.jmx.shared.exceptions.JMXRuntimeException: Error while getting remote MBeanServer for url: ormi://localhost:23793/default
     at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.fetchMBeanServerEjbRemote(CoreRemoteMBeanServer.java:499)
     at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.<init>(CoreRemoteMBeanServer.java:160)
     at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.<init>(RemoteMBeanServer.java:128)
     at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.getMBeanServer(RemoteMBeanServer.java:158)
     at oracle.oc4j.admin.jmx.client.ClientMBeanServerProxyFactory.getMBeanServer(ClientMBeanServerProxyFactory.java:68)
<snip>
And even then, the deploy process still forces the port to 23791.
I restarted the server and JDeveloper, but the problem persists.

Im trying to connect my ipad to my connection at home and its taking the password but still wont connect and doesnt tell me why.i even tried to reset network settings

im trying to connect my ipad to my connection at home and its taking the password but still wont connect and doesnt tell me why?? .i even tried to reset network settings

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, my guess is that it's a router issue. You'll need to get administrative access to the router and determine if it has a firewall. If one is present, turn it off and test the iPad. If that solves the problem, don't leave it that way. Turn the firewall back on but weaken it a notch and test again. Repeat as required.
For what it's worth, a router firewall can stop iPad communication without affecting computer communication. I do not understand why the difference.
Edit...
I just saw the post from Diavonex. An off/on is certainly worth a shot. Leave it off for ten seconds.

Exchange Rate fixed in PO but still difference in GRN

Dear All,
We are using exchange rate indicator fixed in Purchase Order but still value for custom duty in GRN is calculated as per the exchange rate maintained in OB08 for the date of posting the GRN.
PO created 31.03.2015 with document date as 30.03.2015 so that exchange rate is picked for previous date and fixed indicator ticked.
Custom invoice posted with exchange rate as in PO.
GRN posting date - 31.03.2015
But while posting GRN, custom duties are calculated as per exchange rate on 31.03.2015 instead of exchange rate maintained in PO.
Custom duty value 333.40 USD is calculated as 307.75 in GRN.
Regards
Vikas Sehra

Dear All,
I have also raised OSS for the issue for which I got below reply -
if you want your freight condition JCDB to be valuated as
per the fixed rate set in the purchase order, then, you need to post
the reception before than the invoice.
But I am not able to understand what and how to post reception.
Kindly suggest.
Regards
Vikas

Low speed connection, but still have input history.

Hi there,
We have done some tests in our business to see the performance difference between "low speed connection" being enabled and disabled for a system, both from a network perspective, and from a performance perspective on Citrix servers.
We have determined that the 'input history' feature doesn't cause much performance impact, but a lot of the other 'high-speed' features like images and tool tips do.
We would like to be able to have "low speed connection" for our system, but still enable 'input history'. Is there any way this can be achieved, such as through INI or registry changes?
Thanks,
Michael.

I raised a message with SAP, and they responded saying that this is not possible

Condition satisfied but still workflow determined it as false

Similar Messages

Maybe you are looking for