Condition type for Amortization charges

All SAP Gurus,
We want to reduce the amount equal to the Amortization charges from the payment to the vendor.
The calculation are such that we have to put the condition for Amortization charges into Tax procedure.
Which condition type can be used for the Amortization charges in Tax procedure?
Regards,

Dear sir.
Amortization charges
excise value should calculate more that the material base price correct.
so for that u have to create one condition type in M/06 with condition class : A and calculation type : A
insert the condition type in your pricing procedure and from which it should calculate and click statistical and give the sub-total : 4.
while creating Po give the Amortization charges in the canditon type excise will calculate base price and amortization charges .
regards
jrp

Similar Messages

Condition type for landing and clearing charges for imports

All SAP Gurus,
Which standard condition type to be for Condition type for landing and clearing charges for imports?
Regards,

If both Condition types are Quantity basis then you can Create New Condition types by Referring FRA1 & FRC1 Condition types.
Else Create New Condition types called ZCCH for Clearing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Condition Category B
Plus/Minus A
Also in Control data Check Accruals option and in Scales tab give Scale Value as 2 if want.
Create New Condition types called ZLNC for Landing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Plus/Minus A
Uncheck Accruals options and save.
Regards,
Ashok

Condition type for charges in not working

Dear All.
We have created a facility using MM and for this facility, we need to pay the yearly facility agency fee based on the total credit line. To achieve this, we have a condition type (1208) under 'charges' tab in the facility transaction. And from the 'cash flow' tab, we can see that we need to pay the facility for 5 years. After 2 years of paying the facility agency fee, we were told by our user that we do not need to pay the remaining 3 years the facility agency fee. They want to remove this facility agency fee from appearing in their cash flow & treasury transaction.
How do I achieve this?
FYI
I tried to create another condition (same with the earlier condition - (1208)) which effective from 3rd year with lower amount but instead of overriding the the first condition, it is adding another facility agency fee in the 'cash flow' tab.
I tried to create another condition (same with the earlier condition - (1208)) which effective from 3rd year with zero condition but the earlier condition still remain.
I also tried to change/delete the earlier condtion but not allowed to change/delete - greyed out.
Looks like the effective date in the condition is not working. Can anyone share any notes (I've gone thru some in OSS - but could find related note for the time being) or how to change the condition?
Appreciate your advise. Thanks.
Regards
Fauzi

Hi Fauzi
I can think of two possible reasons why you are not able to edit the existing charge:
1. In Field selection "SETTLEMENT-CHANGE", function "003 Activity change", the "Tabstrip: Charges" (field group 70) is set
to "Display" (or others).
I'll put the path to field selection in SPRO for your quick reference:
Financial Supply Chain Management
->Treasury and Risk Management
->Transaction Manager
    ->General Settings
      ->Transaction Management
        ->Define Field Selection
2. The charge in the facility might be blocked for changes because there are other flows posted or because the money market deals which the facility is attached to have posted flows in the same period.
Please check those two points. I hope this helps you solve the issue.
Regards,
M Trein

Condition type for Amortisation cost

Dear friends,
I hve created condition type for amortisation cost in pricing.
It is adding the value for the gross price+ amortisation cost and flowing it to calculation of excise Duty in BASB.
For ex.
P001 - 1000
ZDIE - 100
so BASB - 1100
Excise Duties are calculated on 1100...That is also OK
But when the calculation of CST- As per system it is calculated on 1100 (BASB)....
And here client requirment is to calculate on P001(Gross Price).
Again calculation of
A/P Price + ED + VAT it is taking A/P Price as 1100.
Our requirement is to take it P001 as 1000.
How to take amortization cost to be considered only for the calculation of excise duties and rest calculation in tax procedure being considered on Gross Price.......
Plz. suggest
Thanks in Advance,
navin

I hope you have searched regarding the topic.
Refer following SDN wiki link for all your anwers:
- [ EK01/EK02/VPRS |http://wiki.sdn.sap.com/wiki/display/ERPLO/VPRS,+EK01(ActualCost)andEK02(Calculated+Cost)]
Regards
JP

List of sales condition types for a material

Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.

Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks

New Condition type for pricing

Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??

Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong

New condition type for freight

hi,
i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

hi,
as you have to have three condition types for sales order
ROAD - VENDOR1 - ZVE1
RAIL - VENDOR2 - ZVE2
ROAD - VENDOR3 - ZVE3 - into sales order.
create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
with
LEG 1 - ROAD - VENDOR1 - ZVE1
LEG 2 - RAIL - VENDOR2 - ZVE2
LEG 3 - ROAD - VENDOR3 - ZVE3
create a Z table which captures the information for this.
and link this table to FB70 - t.code
and settle it individually as per FFA.
balajia

Condition types for Material

Hi,
I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
as these condition types are maintained in the pricing schema and hence are returned in the correctly.
I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
Thanks in advance.
Best Regards
Malthi

HI Malthi
I would recommend you use BAPI: <b>BAPI_SALESORDER_SIMULATE</b>. This will give you the conditions how the sales order is going to look when itz created.
This BAPI is mainly used for:
1. Checking ATP Qunatities
2. Conditions/Prices
Hope this helps.
Kind Regards
Eswar

Z condition type for surcharge need to be displayed in billing doc only.

Hi ,
I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
scales values are as below:
Access key:
sales org/dis channel/ route /sales unit(KG)
DE10/02/DETX1/   1 Kilo   =   30 u20AC
skales:
DE10/02/DETX1 / 31 Kilo = 35 u20AC
DE10/02/DETX1/ 41 Kilo =   40u20AC
DE10/02/DETX1/ 51 Kilo =   45u20AC
then for 52 Kilo we have price for these item with 52 Kilo = 45 u20AC
where exactly need to do the config and development changes for displaying in condition type in billing doc only.
Thanks in advance.
Regards,
RAM

In the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
Best Regards,
Ankur

Not possible to determine a condition type for the price in ME49

Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
Utsav

Hi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha

Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Condition types for works tax, SDT,MANDI TAX

Hi All,
are there any condition types for the following:
Mandi Tax,
other taxes(any other taxes)
state development taxes,
works tax
entry tax
it is required to create condition types and put in pricing schema in po or these condition types are defined in tax code and are copied in pricing procedure.
thanks and regards

thanks for giving your valuable time,
We are on ECC 6.0, and these conditions are not appearing in the condition table. I could not go thru these conditions. I referred the SAP NOTE NO 9552289, validity since 8.1.2007 where in the attachment of TAXINN with screen shot is there.
Further clarification
In the forum it was mentioned JVRD - VAT Non deductible and JVCS - CST deductible, is it a typing error. My writing is not for pointing you as wrong, but for taking the understanding.
I appreciate your knowledge and great understanding on subject.
regards

Profit Center on Condition Types for Taxes

We have a billing document whose pricing procedure included two condition types for billing. A single material was delivered and billed but the two line items for the taxes were posted to different profit centers. Where did the difference could have come from?

Hi
Tell me in which version you are in?. What are the account assignments for those condition types?. Do you have multiple sales accounts for that entry?.
Jayaram

Condition types for import pricing

hi,
     the conditions types for import pricing procedure are not appearing.
please suggest all the notes from where i can take reference and create the condition types for import process.
please also suggest what are they?
with regards

Hi anitha,
In case of import purchase. u have to configure the conditions in pricing procedure. The condition types are as follows:
1)jcdb               basic customs
2)jcv1               CVD
3) jec1               ECS on CVD
4)jed1              cess on customs
5) j1cv                secess on cvd
6) jsdb               secess on customs
Go to the master note no 1032295 for recent budget changes.
award points if found useful
chintu

Condition types for Insurance and Duties - Export sales

Hi Friends,
Please let me know the condition types i can make use of for capturing the Insurance and duties paid during export salesand also the condition type for capturing the commission.
Thanks
Ivy

Dear ivy
You can create zee condition types on your own and maintain the required datas. I am just give you one example for insurance.
Go to V/06, copy some standard discount condition type and rename it as ZEIN and maintain the following:-
Cond. class:::::::::::::::: A
Calculat.type::::::::::::::: A
Cond.category::::::::::::::C
Rounding rule::::::::::::::::Commercial
Plus/minus::::::::::::::::::::blank
Manual entries:::::::::::::::D
Amount/percent::::::::::::::X
Value::::::::::::::::::::::::::::X
In V/07, you can maintain the following tables
033:::::::::Incoterms
307::::::::Customer with Release Status
So in VK11, either you can maintain the insurance percentage for Incoterm or Customer, so that whenever you generate sales order with multiple line items, this condition will automatically bifurcate the insurance percentage. Also the most important is that in your pricing procedure, against this condition type, you have to assign EIN as Account Key.
thanks
G. Lakshmipathi

Condition type for Amortization charges

Similar Messages

Maybe you are looking for