Conditional generation of report as per entity selection

Hi,
We have a particular report where we have set Entity as a User POV. The report generates as per the entity users have selected. However we want to set an exception to this for a particular entity. e.g. If a user selects entity "E100000" then the report should display the values of entity "E101000". We want to restrict this rule to this one particular entity. For other entities the report should display the data for whatever entity the user has selected. Can anybody guide as to how go about it?
Any inputs are highly appreciated.
Thanks for help in advance.
Regards,
Rohit

Hi,
Yes AmarnathK is right. Just take another column for getting the value of the other entity "E101000".
Then apply conditional formatting on this column. This column will only be visible if you select entity as "E100000" from POV Selection, otherwise apply suppressing this column (when it is not selected entity as "E100000" from POV selection.
Soumya

Similar Messages

  • Reporting Multiple Currencies per Entity?  Tools or Methods? Planning

    The customer wishes to be able to enter more then one local currency. So they could have USD and CAD or USD and Euros for the same Entity.
    The requirement is to be able to report on totals by currency.
    What is the best way to get report totals of LOCAL currencies when there can be more then one per Entity. So the cell has the currency code in Essbase.
    I can get this with various steps with the excel addin or smartview but how to get it with FR or other tools?

    Hi, Alp
    Thank you for you answer. I've checked your link and it's amazing that information like this was written not in admin but in user guide.
    Another thing i've wondered that it depends on setting of Calculate Currencies calc script (run on save). But it's just a think men must know and do I think.
    Unfortunately I can't see how does it work, although I've done this settings.
    If I set local currency for one of the entity as GBP then I can enter data in GBP of course and Calculate Currencies script runs ok. I can see exact values for local (GBP) and default currency (USD) just on planning form as I set currency dim in page.
    But in my case when i set local currency for this entity back to USD entered value in GBP always changed back to USD regardless of Calculate Currencies script settings. It happens during save on the form
    Can I get a bit more information about some other settings to be done to make this functionality work?
    BR,
    Vladimir

  • Report as per FBL1N - Vendor line Items

    Hi Experts,
    I have a requirement to generate a report as per FBL1N, the current process is as follows. User enters shipments in dynamic selection > document > Reference > right side Reference. '*' is kept before and after the shipments. Other selections are company code and All items radio button and Execute.
    My question is , What are the tables this looks at ? I am assuming BSIK, BSAK and BSEG. How to know which tables it looks at ? I think this may be functional question. If you have any questions please let me know.
    Thank you,
    Surya

    Hi All,
    Thanks a lot for your quick responses. By looking at your responses, here I am presenting the actual reqirement.
    Fianl aim of this report is to give the user to decide GR/IR clearing. User does as follows.
    1. Run MB5S, with the report she finds shipments associated with them by looking at GL line items.
    2. Then she runs The above steps to determine wether those shipments are paid or not.
    3. If they are paid then clear the corresponding entries. If not paid then sends message to Vendor to send Invoice.
    Right now I am doing as following:
    Selctions screen has company code, GL account, Posting date (selection range), PO number (selection option).
    I am querying BSIS for GR data with this data and document type WE. And query BSIS again for document type Z6(Haulier) and posting key 31 for Invoice data for all entries of GR data by matching XBLNR(shipment# in this case) and ZUONR(Assignment key a combinations of PO# and PO line item). GR data and IR data will be into two different tables.
    Now I am going to BSEG for all entries of GR data and IR data and get quantity and Vendor (LIFNR). Now starts the matching of GR with corresponding IR happnes on company code, XBLNR(Shipment#) and ZUONR. If a match is found then keep GR data and corresponding IR data in one line and append to final result set. If no match found then just append IR data to the final result set.
    Loop through the final result set to determine the status based on the following coditions.
    1 if gr qty = ir qty and gr amount = ir amount then F13 pending
    elseif gr qty > ir qty and gr amount > ir amount then GR surplus
    elseif gr qty < ir qty and gr amount < ir amount then IR surplus
    elseif gr qty = ir qty and gr amount <> ir amount then Qty correction
    elseif gr qty <> ir qty and gr amount = ir amount then Amount correction
    Now I have to take the shipments from the above list and go to FBL1N(I already described this). Once this list(FBL1N result) comes I have to prepare the final list for output based the shipmets found in this list by comparing the list came before FBL1N result.
    I am little concerned about the performance also, any tips for that also welcome.
    As mentioned by Pedro above, I want to know wether there are any FMs available or not at each step of this process. If you have any questions please let me know so that I can give more details. Your help is greatly appreciated.
    Thank you,
    Surya.

  • Vendor / customer reports as per Segment / PCtr wise

    Hi
    We have created profit centers with out any assignment to the segments. As per requirement we are using the segments across the profit centers. In New GL reporting, we are getting the TB as per Segment and profit center combination (for GL accounts only). But my client is asking the report for the Subledgers also means they want to see the Sub ledger balances according to the Segment and the profit center combination. I found some reports but they are not up to the mark. I need a report for the following selection criteria i.e.
    Segment - Co.Cd - Profit center - Recon a/c / Vendor / customer number range interval - Period / date selection.
    So please seggest me some reports which fulfills the above selection criteria or to some extent.
    Please help me,as I stucked for this requirement.
    Thanks & Regards
    Ramki

    Hi Babu
    Thanks fo ryour valuable reply. I went trhrough the t.codes and those all are fine. But thing is, is there any possiblity to get a segment and profit center reports in one report?
    And in S_PC0_36000218 system is taking the PCtr groups only, I need the system to take profit center also.
    Please give me your valuable suggestions in this regarding
    Thanks & Regards
    Ramki

  • Can i view customer report as per the business area wise , region-wise how?

    can i view customer report as per the business area wise , region-wise how?

    Hi,
    You can view the report business area wise, extract the report and go to dynamic selection and selection business area. When the report is display just sub total on business area. System is showing report as per your requirement.
    Regards,
    Pankaj

  • "Allow multiple currencies per entity" option in Planning web form

    Hi, All
    The desciption of the option I pasted from the oracle doc library is:
    •Allow multiple currencies per entity: If the application supports multiple currencies, allow entities to support multiple currencies, regardless of base currency. Users can select currency for displayed cell values in data forms
    Well, assume that app has USD as a default currency. App was built in EPMA with multi currency option. All entities have USD as a local
    I build a form and set this flag. According to the text above i want to enter some values (for example for one of the account) in GBP, can I?
    All i need is the binary anwser, Yes or No. Honestly it's not the truth because if the anwser will be Yes i'll be surprised how? I can enter GBP in cell but after saving it returns to USD
    I've allready searched question like this and have found a couple but not answered

    Hi, Alp
    Thank you for you answer. I've checked your link and it's amazing that information like this was written not in admin but in user guide.
    Another thing i've wondered that it depends on setting of Calculate Currencies calc script (run on save). But it's just a think men must know and do I think.
    Unfortunately I can't see how does it work, although I've done this settings.
    If I set local currency for one of the entity as GBP then I can enter data in GBP of course and Calculate Currencies script runs ok. I can see exact values for local (GBP) and default currency (USD) just on planning form as I set currency dim in page.
    But in my case when i set local currency for this entity back to USD entered value in GBP always changed back to USD regardless of Calculate Currencies script settings. It happens during save on the form
    Can I get a bit more information about some other settings to be done to make this functionality work?
    BR,
    Vladimir

  • Planning Unit Hierarchy - multiple owners per Entity

    Hi there everyone
    I have the following scenario and hope you can help me out with a few ideas:
    I have a planning unit hierachy set up. It works well except for one thing - the fact that you can assign only one owner per entity member. The business essentially has multiple owners for most entities. Ownership is determined by which accounts the user is responsible for. An example:
    User 1 is an owner for Entity A, but only for accounts 111-444.
    User 2 is an owner for Entity A, but only for accounts 555-777
    User 3 is an owner for Entity A, but only for accounts 888-999
    As far as I can see in the Edit Planning Unit Hierarchy screen, I am able to assign User 1 as an Owner for Entity A on the Assign Owners tab and I can specify accounts 111-444 in the Primary and Subhierachy Selection tab. Since I can only assign one owner, how can I now provide for User 2 and User 3 requirement?
    I'm using version 11.1.2.1. Any workarounds or suggestions would be highly appreciated!
    Thanks
    Juanita

    I had a similar business case in my previous project. There was no direct solution to this. But we had to stick to a workaround ( not a very nice and comfortable solution, but we were under critical timelines).
    User 1 is an owner for Entity A, but only for accounts 111-444.
    User 2 is an owner for Entity A, but only for accounts 555-777
    User 3 is an owner for Entity A, but only for accounts 888-999
    make a secondary hierachy with different entities i.e. User1_EntityA,User2_EntityA
    Entity A
    User1_EntityA
    User2_EntityA
    and then you can assign different users to all these entities. One major drawback with this is, if we have 100 entities with 10 users .. that will make 1000 more members.. anyhow we did it that ways.. if you get a better solution you can post it.
    Thank You
    Sandeep Kumar Upadhyay

  • Monthly Head count report as per Tax authority

    Hi Experts,
    Our team need to create report as per client requirements for Monthly Head count report by Tax auth. Please let me know is there any standard report through which we could refer for  "Total head count per tax auth" output.
    I will appreciate your prompt response.
    Thanks,
    Ankur

    Dear All,
    S_L9C_94000095 - Info System -> Reports -> Organizational Entity -> Headcount Changes
    Balwant.

  • Allow Multiple currencies per Entity

    Hi All,
    When we will use "Allow Multiple Currencies Per Entity" in a data form ? The name itself is confusing. It means, we can enter many currencies per entity ?

    Hi All,
    If we use "Allow multiple currencies Per entity", do we need to take Entity in the Pages and Currency (Local & USD) on the Columns ? For ex. if i select Entity as USA in Page, then we need to enter the value for Local currency right ? In that case, how Allow multiple currencies per entity works ? In this example, we can enter the data for USA only right
    I'm unable to understand this logic. Pls. clarify me.

  • Error in assigning pricing condition in condition generation

    Hello,
    As a part of configuration, I have to define one pricing condition in CRM with
    Usage - PR
    Calculation type - B - Fixed amount
    which I defined in SPRO-CRM-BASIC FUNCTIONS-PRICING -DEFINE SETTINGS FOR PRICING- CREATE CONDITION TYPE
    for trade promotion condition generation.
    But while assignig this condition  in condition generation type at
    SPRO-CRM-trade promotion management- trade promotions- condition maintenance- define condition generation
    I am getting an error as
    Calculation type B of Condition type 9PP3 is not allowed for Pricing
    Message no. CRM_MKTPL_COND_IF086
    Request you all to help me in going ahead .
    Thanking you in advance
    Shailesh

    HI Willie,
    Thanks for the reply.
    But the conditon which I defined is in CRM and not from R3.
    As per the requirement, I need to define the pricing condition with calculation type fixed amount in CRM. I defined the condition.
    But while assignig this condition in condition generation for trade promotion.
    Thanks in advance.
    Shailesh

  • Trade promotion management-condition generation

    Hi Folks,
    I understand in order for transaction to determine appropriate trade promotion we need to define campaign determination.Similaraly, to determine prices we need to maintain campaign condition type in price determination. Kindly correct me if I am wrong here.
    There is also configuration of condition maintenence group required for condition generation.
    Could some one elaborate me what does condition genereation means.
    regards,
    Sidharth

    You create a TP, it VTS tab or Planning Assignment block (CRM2007 & 7.0), you enter some discounts, then selecting the row, you push GENERATE CONDITIONS button, the system sends conditon records to ERP when you save it. And when you release the TP, it activates the condition records.
    Condition generation : it generates condition records, and fill your condition tables. (e.g. for condition type : Z001)
    for determining the relevant campaign : there is another cond. type : e.g. Z0CD (Campaign Determination)
    you assign a condition maintenance group to the Marketing application, (you can copy it)
    when the sales order pricing works, e.g.
    Z0CD : Campaign 000008 determined
    Z001  :  for determining the discount (%3)
    BR,
    Cenk Sezgin

  • Error in report generation-Load report failed

    I have installed crystal reports  for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
    This works fine in development and testing but when moved to production we are having issues.
    I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
    But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
    Please help.

    Hi Don,
    The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
    Does it mean that there is a problem in the connectivity?
    I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a  third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
    Is there any fix which can applied to the server to get this issue resolved?
    Cheers
    Nithya.

  • Issue in using presentation variable as filter condition in the reports

    Hi,
    I have an issue in using presentation variable as filter condition in my reports the details are as follows:
    Details :
    We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
    We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
    Please suggest how can I overcome this issue.
    Thanks in Advance.
    Regards,
    Praveen

    i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
    Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

  • 9i:Can Page number be obtained before the entire generation of report ?

    Dear all:
    Suppose there is a report, the report is printed on both side of paper
    The page no of report (current logical page no and total logical page no) reset at each customer,
    For each customer,
    i want to print a logo on the front side of the last page (The logo would be read by machine so that it must be printed on the front side of the last page)
    In 6i, As page no/total page no cannot be known in function/triggers until entire report generated.
    so I have to generate the report twice
    First) I have to get the total no of paper for the report of each customer
    Second) Actually generate the report
    so that i know which page the logo should be printed
    (In the format trigger, when the front side of last page reached, return true in "format trigger of the logo" to print the logo)
    However, the method is not effective.
    Heard from others, 9i can solve the problem because in function/trigger, before the entire generation of report,
    the total logical no of page and current page can already be known. (so that the generation
    can be done at one time..no need to do twice)
    any suggestion ?
    Thanks for you help

    Hi,
    So I cannot test from the report builder, I guess?Pl take a look here:
    http://download.oracle.com/docs/html/B10314_01/pbr_cla.htm#640470
    This gives you a list of commands that you can use the keyword with. It says No for rwbuilder. So it may not be possible to test it with Builder.
    Reading the other threads, this seems to be a very complicated thing to do, creating EAR, etc, and I seem to need 9iDS, not AS (I have AS)?One of the main reasons a JSP report is useful is - you can deploy it with your J2EE application, ie, you place the report JSP alongwith other JSP's of your application, and deploy the J2EE application (EAR). So thats why you see so many references to EAR's, packaging etc in the other thread that discuss JSP's.
    Th answer to your Q is - no, you don't need iDS for deploying and running the JSP. You can run it from your iAS installation (thats what the iAS suite is for - deploying and running your reports that you developed using iDS). What you need to do is this:
    Copy your JSP to
    ORACLE_HOME\j2ee\OC4J_BI_Forms\applications\reports\web
    Go to the Enterprise Manager, and make sure that the OC4J instance (OC4J_BI_Forms) is running. Now access your JSP with the following URL:
    http://machine:port/reports/<Report_Name>.jsp?server=<server_name>+userid=<db_conn_string>
    For complete information about deploying and running JSP's in iAS, refer to
    http://download.oracle.com/docs/html/B10314_01/pbr_run.htm#1011901
    Navneet.

  • Automatic generation of report to email

    Hi,
    Im pretty new to the OBIEE environment and i would like to set up a scheduled job to run a report at a specific time which will email the result in an excel document to my email address.
    I set up an iBot and saved it to My Folders
    Condition condition - chose the report i created in Answers
    Schedule - Scheduled it to start and end on a specific date and run every 5 mins (to test)
    Recipient is set to Me
    Delivery Content - Request the report i created in Answers and send as Excel attachment
    Destination - Active Delivery Profile and Email
    I have a default Email device set up in my settings with my email address.
    I would like to run the report at a certain time and have it send to an email mailing list but when i save it nothing happens
    Any help would be appreciated
    Thanks

    Hi,
    Firstly ensure that you have enabled scheduler service by making required config then You can check the ibots log which get created in Oracle BI / Logs folder which would give you where exactly you went wrong. Let me know if you have any further Issues
    Regards

Maybe you are looking for