Conditional suppression of W2 spool creation for some employees

Hi Friends,
We have a requirement where we need to suppress the generation of spool for some employees based on some value in one of the infotypes.  We need the temse files to be created for every pernr but spool be suppressed for some pernrs satisfying some conditions.
Any inputs from you will be valuable.
Thanks,
Sumeet

In one of the custom infotype some value is stored to stating his election for paper or online W2.  Those who opt for online, should not get paper copy.  So when annual production run for W2 is done through PU19, it should create Temse files for every pernr.  And it should exculde those pernrs from the spool who have opted for online W2.
The temse creation is necessary for every pernr.  Its only the spool that has to be suppressed for some pernrs.
Thanks,
Sumeet

Similar Messages

  • ESI not coming for some employees

    Hi,
    For some Employees ESIC is not Deducting, though i have maintained Infotype 0588, but for some employees its coming...and in RT table Employer ESIC Contribution is coming, but in payslip Employees ESIC is not coming...please help me in this issue...
    Thanks & Regards
    Ragini NIkam
    SAP-HR Consultant

    Hi,
    Please confirm the followings:
    a) Are you able to see /3E1 & /3E1 for those cases in RT?
    Ans: In RT Table only i am able to see /3er and not /3e1
    b) Value of /112
    Ans: /112 is coming Rs. 7988.50 thats my gross amount
    c) Validity of IT0588 (ESI)Please confirm the followings:
    Ans: Validity is 01.04.2011 to 31.12.9999,
    But sir how its coming for some employees and and for some its not.
    Thanks & Regards
    RAGINI Nikam
    SAP-HR Consultant

  • Help required:Spool Creation for posted document in FB03 transaction

    Hi Experts,
    The requirement is like I have to send the PDF document to the user by mail once the document gets posted in SAP ECC. The posting is taking place by IDOC.
    The problem is how do i get the spool request for the document which is posted in ECC. It can be seen by entering document number in FB03 transaction but there is no smart form or SAP script or any Output type. The document is posted by IDOC.The client wants the PDF document excatly as seen from FB03 transaction. Please help as this is typical requirement i have never come across.
    Do let me know some of the user exits where in just after the posting i can write my code for spool creation. The idoc is using the BAPI_ACC_DOCUMENT_POST.

    HI
    In test mode i am able to view the document no. but not the reference document no and when double click on the document no i am not able to view the journal entry.
    Thanks.

  • Issue regarding condition pricing date as system date for some condition types in sales order

    Hi
    I have already created a sales order on 30.04.2014. Today I am adding new line item to sales order in VA02 transaction. in this order new line items condition pricing date for conditions JEX2,JECX should show as 12.06.2014. But currently it is showing as 30.04.2014. I need condition pricing date as system date for above conditions.
    Regards
    prashant

    Hi
    When I am changing pricing date VBKD-PRSDT in sales order header . It is changing the condition pricing date for all. Sales order is created on 04.06.2014. I have added line item 150 on 14.06.2014.
    After adding line item 150 , there I have changed the pricing date as 14.06.2014. in sales A tab of item 150. But still it is taking from Sales order header date as 04.06.2014 for all conditions. But my requirement is for line item it should take as system date for some conditions like JEX2,JECX& JA1Y but for other conditions it will take as Order creation date. Please suggest. I have also attached screen shot below. please go through it.
    Regards
    PK
    Sales order header change mode VA02
    Here pricing date VBKD-PRSDT = 04.06.2016
    Item change mode
    I have added new line item 150 on 14.06.2014
    Changed the condition pricing date to 14.06.2014 & saved
    After saving I have gone to Va02 screen of line item 150
    & there I have gone to condition pricing date field from item condition tab
    for JEX2 condition type but still here condition pricing date is showing as
    04.06.2014 as below.
    Condition pricing date
    My requirement is like this
    For some particular conditions like JEX2  condition pricing date will take as system
    date instead sales order creation date when I will add a new item 150 on
    14.06.2014.but for other conditions it will show as order creation date for the
    same line item 150 .

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • Spool creation for each vendor/ payment document in program RFFOUS_C

    Hi experts,
    Requirement is to create spool for each vendor/payment document in RFFOUS_C.
    What is presently happening is only one spool is created for all the payment document numbers.
    I need to create separate spool for each cheque and remittance advice based on the payment document.
    Ex:I have 2 vendors with one cheque and remittance advice each.The first cheque and remittance advice of vendor 1 should be created in spool 1 and the second cheque and remittance advice of vendor 2 should be created in spool 2.
    Please suggest your inputs as to what needs to be changed in the program RFFOUS_C or do we need some configuration to achieve the same.
    Regards,
    Joby

    HI,
    Try to see if the check is register on FCHN transaction. So, you will be able to reprint the check using FHC7 transaction.
    Let me know your comments
    Daniel

  • Error during inbound delivery creation for some times not always

    Hi,
    I'm getting the following error when i'm trying to create an inbound delivery for PO.
                                                                                    Diagnosis                                                                               
    The system attempted to find the reference movement type for         
         the Warehouse Management system. A corresponding entry is            
         missing in table 156S with the argument 101/X/X/ / /X/.              
         The argument consists of:                                            
         o   IM movement type                                                 
         o   Indicator: Value update                                          
         o   Indicator: Quantity update                                       
         o   Special stock                                                    
         o   Movement indicator                                               
         o   Access indicator                                                 
         o   Indicator: Consumption         
    Can someone help me to resolve it? as it is not happening always
    Appreciates everyone time and help.
    Thanks and regards,
    Siva

    Hi,
    Thanks for the response and yes i did maintained IM/WM mvt types for 101 in both places.
    If the movement type is maintained well why SAP says it is not?
    SPRO > LE > WM > Interfaces > IM > Define Movement Types - "Assign WM Movement Type References to IM Movement Types'
    Related tabel is V_156S_WM
    If you check your configuration you will see that there are many entries with 101, and there are several other parameters...
    First you should check what you are doing in IM, what parameters that mvt has (qty, value update, special stock, etc) > after that you should check whether it is maintained well in WM customizing - see steps in my previous email.
    Regards,
    Csaba

  • Element Entries for some employee not coming

    Dear All
    I am facing a problem in element entries. Let me take you step by step.
    1 - I defined 7 employees and obviously one is assigned as CEO and other as management and supervisors grade.
    2 - Suppose Mr. A is a CEO and MR. Z is a supervisor.
    3 - I created elements name Company Car element and COLA allowance element.
    4 - I created element link and provided Company Car element to a person having position of CEO and grade of Executive.
    5 - I created another element link and provided COLA allowance element to supervisors with standard check box checked.
    6 - when i returned to employee form to confirm the element entries then their i found that list of value containing entries of company car allowance for CEO is coming in element entries form, but when i check for supervisors then in entries form list of values containing no entries.
    Note: Effective date for all the entries i took is 01-Jan-2009. I am setting up all the setup on vision instance.
    Can any one share the idea what could be going wrong.

    Duplicate thread
    trouble creating element entries

  • Inconsistent for some material in Material master

    During creation for some material I am facing an error "The material type  does not exist" Message no. M3104. It happens with all material type.
    However, I have already found the reason for that. The material was already created before (year 2011) with ZMAK material type (but no transaction yet) and now the material type is deleted from production server. I can see the material in MARA table. It shows the material type which already has been deleted.
    Also I can see the material into all table MARC, MARD, MBEW, MAKT, MARM.
    But the interesting thing is that, I can't see the material in MM60.
    I can realize there are some inconsistent. But the data is available in all tables, so why I can't see the material in MM60 ?
    I have an option to re-create the material type. But it is my last option. Is there any other option to make the material visible in MM60 (without creating the material type).

    Hi,
    For workaround, you can create new material type FERT and transfer to production system, create material code FESEN045* or FESEN045. Or FESEN045’ not same material code FESEN045 (which is not possible) with material type FERT. Once done, you can do material to material transfer with MB1B with 309 movement type. If quantum of materials is more, you can go for BDC with MB1B with 309 movement type.
    Later you can delete material number FESEN045 with material type ZMAK and once all done, change material code to FESEN045 from material code FESEN045* for material type FERT.
    Or else you can have a mini project; keep all material stock created with material type ZMAK.
    You can create new material type FERT and then transfer to production system. Create new material code with new material type FERT and then go for MMAM. Finally add stock to new material code.
    Regards,
    Biju K

  • Create spool number for sap script

    how to create a spool number for a SAP script. What is the program name which we should modify to write the code logic for spool creation for the tcode ME9F ?

    Hi,
    Spool Request in Transaction SP01 and there by generated a Spool Request Number.
    Spool request is a document for which a print function has been selected. However, it has not yet been output to a printer or another device. The output data for the print document is stored partly formatted in a data store until an output request is created, that is, until it is sent to a particular output device.
    The spool system uses a spool request to store the print data temporarily and to access it. The data is stored in a temporary format. You can also display the print document. The system automatically assigns a 10-digit ID number to a spool request.
    Output request: From the point of view of the SAP spool system, an output request outputs the print data of a spool request to a particular output device.
    Multiple output requests may exist for a single spool request. Each represents an instance of the output of the same spool request. Each of these output requests may have different attributes, such as the target printer or number of copies.
    By differentiating between spool request and output requests, the spool system provides a means of storing the data temporarily.
    You will get the spool no. in the parameter JOB_OUTPUT_INFO after calling the smartform function module in print program. The spool ids of the prints is stored in table JOB_OUTPUT_INFO-SPOOLIDS.
    Also if this spool is being generated internal to your program, then SY-SPONO should have the value.
    You need to create an Adobe Form Application, get the data from the backend based on Spool request number.
    You can create an application in Webdynpro, wherein when you click on a button and the Adobe Form is displayed with all the data from the backend and you should be able to print it.
    Does that answer your question ?
    Cheers,
    PANKAJ

  • Pay slip spool creation problem

    Hi All,
    Is there an option in SPRO to specify NO SPOOL creation for salary statements?
    We are on ECC 6.0, BP 1.2, ESS 603.
    If not is there any other option to not create any spool for pay slips?
    Thanks
    Vinay

    May be you can give a try.....
    Under spro node, perform Provide Salary statment as PDF in Internet --->> Edit Feature EDPDF.
    Here, in decision tree, use the return value -
    $CEDT$.

  • Condition recordscoz for some condition type4s

    hi all,
    how can we maintain condition records for some condition types,For eg...
    MWST
    SKTO
    FRA1
    ZA01
    RA01
    HB01
    RB00..etc..apart from MEK1..coz for some condition types this t.code dose`nt work
    Edited by: MANI ROOPA SD/MM on Feb 28, 2008 12:06 PM

    Hi,
    The condition types you have mentioned are supplimentary conditon types and they afre dependent on the main conditons ( Like PB00 ), so they don not have any access sequence.
    Regards
    Reward Points if useful

  • How to Avoid Grouping for some conditions?

    Hi,
    I am facing a problem in Sales_commission Report. In this report I am grouping data Based upon first by
    salesman and then by customer. And also some sorting conditions. I designed all grouping by using report wizard.
    The problem is: If sort_by Parameter =customer then only need to group data based customer.
    Else ie if sort_by= 'order_no' or 'Inv_no' then no need of grouping the data by customer. Display data
    as per sorting condition.
    Is there any solution for this problem?

    Hi,
    I am facing a problem in Sales_commission Report. In this report I am grouping data Based upon first by
    salesman and then by customer. And also some sorting conditions. I designed all grouping by using report wizard.
    The problem is: If sort_by Parameter =customer then only need to group data based customer.
    Else ie if sort_by= 'order_no' or 'Inv_no' then no need of grouping the data by customer. Display data
    as per sorting condition.
    Is there any solution for this problem?There is no way to remove the grouping based on customer, so sorting based on customer will be retained.
    Way to hide the customer group fields in the customer repeating frame is by using format triggers based on sort_by_parameter,
    and place the customer fields in the last group repeating frame also and show or hide this fields depending on sort_by_parameter.
    Hope this helps.
    Best Regards
    Arif Khadas

  • Hi All,  I am trying to install informatica 9.1 HF 2 connecting to 11g DB.  when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.  The DB is running   any id

    Hi All,
    I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
    when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
    The DB is running
    any ideas?
    the error message states:
    THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
    thanks

    Yup, that did it.
    I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
    Thanks.

Maybe you are looking for