Config Info - CSS Newbie

I can't figure out why this isn't working...it is basic config, and I am eventually trying to to back-end SSL termination. Need basic connectivity first though. If anyone can assist that would be great.
thanks in advance!
CSS11501# term len 0
CSS11501# sh run
!Generated on 01/15/2007 20:38:54
!Active version: sg0810106
configure
!*************************** GLOBAL ***************************
!************************* INTERFACE *************************
interface e1
phy 100Mbits-FD
description "SCTREC02"
bridge vlan 55
interface e2
phy 100Mbits-FD
description "SCTREC02-9/11"
bridge vlan 255
!************************** CIRCUIT **************************
circuit VLAN55
ip address 161.19.55.5 255.255.255.192
ip virtual-router 55
ip virtual-router 150 priority 105 preempt
ip redundant-interface 55 161.19.55.4
ip redundant-vip 150 161.19.55.8
circuit VLAN255
ip address 161.19.55.66 255.255.255.192
ip virtual-router 255
ip redundant-interface 255 161.19.55.65
!*********************** SSL PROXY LIST ***********************
ssl-proxy-list SSL-PROXY
ssl-server 1
ssl-server 1 vip address 161.19.55.8
ssl-server 1 cipher rsa-with-rc4-128-md5 161.19.55.8 443
ssl-server 1 unclean-shutdown
ssl-server 1 ssl-queue-delay 0
backend-server 20
backend-server 20 ip address 161.19.55.75
backend-server 20 port 443
backend-server 20 cipher rsa-with-rc4-128-md5
backend-server 10
backend-server 10 ip address 161.19.55.74
backend-server 10 port 443
backend-server 10 cipher rsa-with-rc4-128-md5
!************************** SERVICE **************************
service sctam103:1-1
ip address 161.19.55.74
protocol tcp
port 443
keepalive type tcp
keepalive tcp-close fin
keepalive port 443
active
service sctam104:1-1
ip address 161.19.55.75
protocol tcp
port 443
keepalive type tcp
keepalive tcp-close fin
keepalive port 443
active
!*************************** OWNER ***************************
owner AMLDAP
content services-sys:ssl
vip address 161.19.55.8
protocol tcp
port 443
add service sctam103:1-1
add service sctam104:1-1
active
CSS11501#

try setup a group -
group
add destination service sctam103:1-1
add destination service sctam104:1-1
vip address 161.19.55.8
active
I had to add this in the first time I used the CSS models as the return HTTP traffic was coming back with the real server IP rather than the VIP IP. You should run an ethereal trace to see what responses you are getting.

Similar Messages

Bad system config info

Hello,
OS WIN 8.1
HP Pavillion
I got this message Bad system config info on a blue screen. I can't boot up the OS, even tried safe mode and nothing works. Tried Refresh and nothing.
I need to access my documents and using HP recovery manager with flash usb stick, trying to copy the documents i need to save, but at times it tells me No USb is connected.
There is a problem I just can't get, I tried so many things, Extensive Stress test, passed. Chkdsk /r, no problem. It tells me the computer is locked, or Antivirus is running....Can anyone pls help/
\TKS
Desperate to fix this

When trying to back up files I assume you aren't attempting backing up to same flash drive that contains HP Recovery?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

RE: (forte-users) URL-based Config Info

You can use xml over http to pass information between Forte and Java. You
can use httpdc/httpsupport(Forte3.5) library to send and receive using http
in Forte and use servlets in java.
ka
-----Original Message-----
From: Lapeyre, Michael [mailto:Mike.LapeyreONSTAR.com]
Sent: Tuesday, November 21, 2000 7:04 PM
To: 'forte-userslists.xpedior.com'
Subject: (forte-users) URL-based Config Info
I am looking for a way to share run-time configuration information between
Forté and Java processes, possibly running on different boxes (Solaris).
Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP.
Does anyone have any pointers on how to access such info from a Forté
service object?
Thanks,
Mike Lapeyre
EDS / OnStar
mailto: mike.lapeyreOnStar.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

You can use xml over http to pass information between Forte and Java. You
can use httpdc/httpsupport(Forte3.5) library to send and receive using http
in Forte and use servlets in java.
ka
-----Original Message-----
From: Lapeyre, Michael [mailto:Mike.LapeyreONSTAR.com]
Sent: Tuesday, November 21, 2000 7:04 PM
To: 'forte-userslists.xpedior.com'
Subject: (forte-users) URL-based Config Info
I am looking for a way to share run-time configuration information between
Forté and Java processes, possibly running on different boxes (Solaris).
Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP.
Does anyone have any pointers on how to access such info from a Forté
service object?
Thanks,
Mike Lapeyre
EDS / OnStar
mailto: mike.lapeyreOnStar.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Firefox says it can't load config info ?

Firefox informed me I had an old version and recommended I install the new one 3.6.15, I did this but when I tried to run it, it says 'can't load config info'. so now I can't use firefox ??

Do a clean (re)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
You may need or want to create a new profile to remove all remnants from that old Firefox 3.0.19 version and start with fresh files.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

CSS newbie - 8.10 upgrade problem

I typed the config from our working 11503 7.10 CSS into a new 11503 8.10 CSS. Show Run for each is identical (see attached). When I swap-in the new CSS I get "Page not found" from the VIP, and all the 8.10 CSS will do is bridge me to the real server addresses. What have I missed?
NB 8.10 CSS has SSL module and license.

I have seen this kind of things in the past.
Often it is cable misconnected or arp table of gateways/servers still pointing at the previous CSS even if disconnected.
So, clear all arp table on gateways and servers.
Then verify they learn the new CSS mac address correctly.
Then verify connectivity using ping.
Then use a browser.
If it still does not work, capture a sniffer trace in front of the CSS.
Gilles.

DNS ZONE Config on CSS

Hi All,
Is it possible to config DNS ZONE config on CISCO CSS.
Can anyone explain me what does this commands do
dns-server zone 1 tier1 "primary"
dns-server
dns-record a <Zone Name> <External IP> 1 single kal-icmp <VIP> 254 sticky-disabled weightedrr 1

How to Configure the CSS to Load Balance DNS Servers
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d015a.shtml
For example,Basically we need to enter the following commands:
Configure the DNS server zone for zone-based DNS. Specify the zone, tier number, and an optional text description:
- CSS (config)# dns-server zone 0 tier1 ""
Configure the CSS to act as a DNS server:
- CSS (config)# dns-server
Add the DNS records as needed:
- CSS (config)# dns-record a www.home.com 192.x.1.1 15 single kal-ap 172.x.25.1 50
sticky-enabled
Configure DNS as primary to point to itself:
CSS (config)# dns primary 172.x.1.90
(circuit VLAN1 - ip address 172.3x.1.90 / 24)
This is just an example but it is basically all you need to configure DNS on the box.
DNS configuration commands:
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_710/cmdrefgd/cmdglobc.htm#wp1104782
A different use on the box for DNS would be basically to load balance the DNS traffic
between DNS servers. This is however something different to configure on the box and more
details can be found here:

WebSphere plug-in config info

Where can I find information on configuring Sun One Webserver for the WebSphere plug-in? Which config files, params, etc. I have already done this for Weblogic, which involved adding the plug-in info in magnus.conf and adding the plug-in object to obj.conf. I just need to set it up likewise for WebSphere.

Here's the IBM docs:
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.express.doc/info/exp/ae/tins_manualWebIPL.html
If this does not help, perhaps you may also want to contact IBM support.
Thanks
Manish

3 Column CSS Newbie

Hi all,
I have a website that uses table. I am trying to setup a template in CSS so I can convert over from table format. Below is my my css and html. I have 3 questions.
1) How do I make it so all three columns stay the same height or expand to be the height of the longest?
2) The text, if long enough, in each column will flow into the other columns/divs. How do I make the text wrap and stay in the proper div?
3) It appears that I have a gap between column 3 (right column) and the footer. Do I have something set making this happen (I don't want a gap).
I have the float clear indicated in my footer css. I don't know if that is the proper place to have it (don't know much about clearing floats) or if that is causing some of my problems.
Thanks in advance....Chris
CSS:
<style type="text/css">

</style>
HTML:
<body>
<div id="wrapper">
<div id="topbar">Search Bar/Links/Contact Us/ Date</div>
<div id="wrapper2">
<div>Logo Goes Here</div><div>SWF Goes Here</div>
<div>navigation bar goes here</div>
<div id="left_column">
<p>Left Column</p>
</div>
<div id="main_content">
<p>Main Content</p>
</div>
<div id="right_column">
<p>Right Column</p>
</div></div>
<div id="footer">footer</div>
</div>
</body>

Example 3-column CSS layout:
http://alt-web.com/TEMPLATES/3-col-fixed-layout.shtml
CSS divisions do not produce equal height columns. You'll need to trick the eye into thinking they are equal buy using a repeating background-image that tiles down the page. This technique is called Faux Columns.
You can see a crude example here:
http://alt-web.com/TEMPLATES/3-col-white-gray.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

URL-based Config Info

I am looking for a way to share run-time configuration information between
Forté and Java processes, possibly running on different boxes (Solaris).
Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP.
Does anyone have any pointers on how to access such info from a Forté
service object?
Thanks,
Mike Lapeyre
EDS / OnStar
mailto: mike.lapeyreOnStar.com

Hi,
The pageURL under the showPage needs to point to the final destination URL that you need to render. The loginURL under authentication needs to point to the login page where you will submit the user/passwd.
You can view a step-by-step demo on the PDK from:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDKGENERAL/PDKHOME/PDKDEMOS2/DEMOSOURCE/PDKURL/FINANCEAUTHPORTLET/YAHOOFINANCEAUTHDEMO_VIEWLET.HTML
and other demos too from:
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&9054_PDKHOME_39847486.p_subid=176584&9054_PDKHOME_39847486.p_sub_siteid=73&9054_PDKHOME_39847486.p_edit=0#PDKURLDEMO

SRM XI Config info

Hi All,
Please guide me to the path where I can get XI configure info for SRM EBP 4.0 with Server 5.0
Thank you,
Sree

HI,
Go to Service Market place- here is the link- there are master guides
https://websmp207.sap-ag.de/instguidesnw04 ->mySAP Business Suite Solutions->mySAP SRM->Using SAP SRM Server 5.0
Regards,
Moorthy

Configuration Manager - How to display all config info?

Hi,
I noticed that the Configuration Manager doesn't display (and allow you to edit) all of the info in configuration.xml. For example, the openhttp proxy properties aren't listed. Is it possible to expose these through the Configuration Manager? This link (the lone comment at the bottom of the page) seems to indicate that it is indeed possible but offers no explanation:
[http://blogs.oracle.com/bbenac/2008/08/configuring_proxies_in_alui_co.html]
Thanks.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

MS6178 Ver 1.1 - Product & Config Info Required

A few weeks ago my Gigabyte Board Exploded Now I've got a MS6178 Ver 1.1 Board which was recupped by my bro.
It has an Intel Celeron 700/128/66/1.7V mounted.
Although my intensive search I don't seem to find any info about it.
Can anybody help me out finding out all info needed to run this board again.
What Graphic-/ Soundcard can I mount?
Which Memtype can I use?
Etc.,etc.,etc.
Thanks upfront guys
Greetz B

Here is a link to the MSI page where you can go to get a copy of the manual and the sound drivers for your motherboard.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=116

Standard method of storing config info in an EJB application

HI,
What is the standard way of storing config information in an EJB application?

Open source GlobalEnvironment at http://www.acelet.com/opensource/index.html.
Also, you can use SuperEnvironment, a GUI, to manage it:
http://www.acelet.com/super/SuperEnvironment/index.html.
SuperEnvironment also has a plug-in for Netbeans.

HELP EMAIL CSS NEWBIE MELTDOWN

I am using the link below as reference with the suggested
“force” for the font size discrepancy in gmail. Nothing
is working that I have tried. I do not know how to apply the
suggested “force” to the text.
The test sample I have included contains reverse type and
type. I have left the code above the body copy so you can see the
styles I am using even though this is all stripped by gmail.
Any insight and instruction would be greatly appreciated.
Thank you
http://www.xavierfrenette.com/articles/css-support-in-webmail/
Gmail
• Keeps only the HTML between the <body> and
</body> tags. Discards the rest.
• Removes any <style> element and its content,
even if it's within the <body> element.
• Removes any <link> element.
• The font size is bigger in <table> elements, so
you'll probably have to force it with: <table
style="font-size:/*your size*/;"></table>
This is the link to the test sample
http://64.224.200.235/www/RYTEST.html

I am using the link below as reference with the suggested
“force” for the font size discrepancy in gmail. Nothing
is working that I have tried. I do not know how to apply the
suggested “force” to the text.
The test sample I have included contains reverse type and
type. I have left the code above the body copy so you can see the
styles I am using even though this is all stripped by gmail.
Any insight and instruction would be greatly appreciated.
Thank you
http://www.xavierfrenette.com/articles/css-support-in-webmail/
Gmail
• Keeps only the HTML between the <body> and
</body> tags. Discards the rest.
• Removes any <style> element and its content,
even if it's within the <body> element.
• Removes any <link> element.
• The font size is bigger in <table> elements, so
you'll probably have to force it with: <table
style="font-size:/*your size*/;"></table>
This is the link to the test sample
http://64.224.200.235/www/RYTEST.html

CSS Newbie - Modules required for One-Legged topology

Hi all,
I'm looking to setup a system to load balance 12 http web application servers which talk to a backend database cluster. The servers are connected to top of rack 4948 switches which are dual homed to a pair of 6500 chassis for resilience.
Looking through the application networking pages on CSS's I think that a one-legged pair of CSS11503 switches (possibly in an Active-Active standby mode) connected one to each of the 6500's should do the trick. My question is does this sound sensible and would I need any other module in the CSS11503 other than the SCM?
Thanks in advance,
Zac

Zac,
be aware that the CSS is splitting the traffic accross all the modules [no matter where the traffic came in]. So the more modules you have, the more connections the CSS can handle.
For this purpose we sell SAM module that have no interfaces and their only purpose is to perform loadbalancing decision.
Also, regarding one-armed solution.
At first glance it is easy deploy.
However, the CSS is a stateful device, so it requires to see for a single connection all the packets from the client and all the packets from the server.
In a one-armed scenario, this is not automatic. You need to set the CSS to be the default gateway of the server, or use client nat or policy routing.
If you go for client nat, the servers will see connections from one ip address only and you won't be able to perform stats about the clients.
Gilles.

Config Info - CSS Newbie

Similar Messages

Maybe you are looking for