Configurable Automated Process

Hey Everyone!
I want to the best way to import a set of instructions to send to a micro controller. I would like to import a file (text, csv, etc) with a list of commands in sequential order.
Often, before and after an instruction, I will need to call a sub vi to carry out a task to calculate variables for the instruction.
Attached is an example of instructions I'd like to send. The grayed boxed are Sub-VIs.
Also attached is some sample code I am playing with to import the instructions from a csv file
Attachments:
Flow.xls ‏42 KB
Flow.xls ‏42 KB
Automated Process.vi ‏41 KB

A good approach is trough NI-VISA serial communication commands, take a look at the overview here. Just make sure that your micro controller supports serial communication (typically RS-232). There are several threads that talk about this and they can help you to develop your application like Serial Communication with micro controller. I hope this helps!
Alejandro | Academic Program Engineer | National Instruments

Similar Messages

  • Configuration of processes on R/3 side

    Presently using version 4.7 of R/3 which was linked to CRM system through ALE. CRM server is down since long time. But business processes like sale order / Customer creation which were scheduled with R/3 transactions are getting triggered as soon as a transaction takes place on R/3 side.
    These transactions are not getting cleared and outbound queques is getting accumulated day by day which is affecting the performance of Live system also.
    Not able to identify where these automated processes are defined/configured on R/3 side. Can anybody pls help in identifying the root cause so that I can stop  these automated processes. 
    Thanks in advance.
    anu

    Hi You can stop data flow to CRM to continue u r business on r3 side
    this you can achieve in 2 types one physical method by disconnecting the Adapter
    Plug in connected to CRM server and deactivation of Bridge, when yiou want to
    Message flow > Display generic Synchronization Bridge configuration
    you can choose either of the methods and continue with u r R3 side business Process.
    Venkat

  • How to configure quality process with batch management.

    Dear Friends,
                we have a scenario,our client receive goods with 101movement type  into quality inspection stock.
    once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
    failed in quality test will  be rejected.please give me suggestion how to map the scenario.while i am testing
    the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
    movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
    configure the process.we are not using QM module.
    please suggest me.
    Regards,
    Varun

    In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
    if batch creation is set to manual, enter a manual batch no & proceed.
    But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
    Hope this helps.
    Regards
    Mithun

  • Oracle db 11g r2 Configuration of processes and session

    I recently installed Oracle DB 11g R2 and 50,000 users connect to this database suggest me what would be basic configurations .
    Processes and sessions parameters for database are 5000 and 5505 but it is little lagging now so if its possible i want to make it maximum of processes and sessions or automatic .

    50,000 users getting connected concurrently? How many users/sessions remain active at any given point of time?
    For such high userbase/sessions better to go with share server configuration, since I cannot assume that even 10% of the users will be active at any given point of time so better to use shared servers and dispatchers.

  • Configure server process

    Dear All,
    We are in the process of upgrading oracle applciation r11.5.10.2 to  r 12.1.3 , 12.1 upgrade is about to complete,
    a) can I upgrade to R12.1.3 with all latest RPC and patch fixes, and then configure "Configure and start server processes using rapidwiz"?. or I have to do this after upgrading to R12.1.1
    b) in the above scenario, if I configure server process after upgrade to r12.1.3, then can I upgrade OAS to 10.1.3.5 later ?
    c) Do I have to run rapid wiz (configure server process) as root user or app tier user?
    Please advise

    a) can I upgrade to R12.1.3 with all latest RPC and patch fixes, and then configure "Configure and start server processes using rapidwiz"?. or I have to do this after upgrading to R12.1.1
    You have to apply those patches after you configure and start the server processes.
    b) in the above scenario, if I configure server process after upgrade to r12.1.3, then can I upgrade OAS to 10.1.3.5 later ?
    Yes.
    c) Do I have to run rapid wiz (configure server process) as root user or app tier user?
    As root user if you are using (applmgr and oracle) users to maintain the application and database tier node files. If only one user maintains all application/database tier nodes files then run Rapid Install as that user -- Just run Rapid Install as you did when you had to lay down R12 software.
    Thanks,
    Hussein

  • How to configure server process in sld add server in configtool

    hi friends
    i  have added the server process in  configtool after restaring the server  sld server is stoped it not staring and it gives a messge that configur server process in sld adiminstration
    can any one help how to configure the server in sld ?
    and what are ther prerequesties that i need to take  when i am adding sever proces in configtool and how many server proces i can add in the java engin
    after incersing server proces how to configur in sld ?
    regards
    raja

    hi janu
    thanks for responding
    i know how to configur  was abap and was java in sld. i have issue when i add 2  server process in configtool , sld server is stoped there it is giveing maintal profile in the sld administration. i would like to know what need to me manintatinge in sld this is my issue .
    regards
    raja

  • External Driver Configuration for Process Integration 7.10

    Hello colleagues,
    I need connection the External Driver Configuration for Process Integration 7.10. Where is the how to?? The PI is 7.10 and bbdd is Oracle.
    Regards.

    Hello Victor
    You will easily find the answer to this by searching the forum. Use the search terms "jdbc driver 7.10".
    Please search the forum first before opening a thread. If you don't find the answer then open a new thread.
    Regards
    Mark

  • Automated Process to save Report  in Share drive?

    Does SAP has any functionality that enables client to setup some sort of autmated process to generate Report(Excel)  and save it to share drive?
    Forgive me ignorance.

    Hi Chetan:
    thanks alot for your response.
    I have couple more questions for you if you don't mind.
    The client I am working for looking for ways to send Report to Exec.
    1. They want to run the report and save it in excel sheet in share drive for Exec? They want it to be done by some sort of Automated process , Can you think of doing it anyway?
    2. Sending email by Bex Broadcaster. To send email, do they need to develop WAD?  How the Bex Broadcaster works? The Client does not have any WAD now.
    Can they still send Exec repors in email in html, pdf format?
    3. Enterprise Portal - How they can use it?
    Points awarded.
    Thanks a lot!

  • Can I configure capture process of streams on physical standby

    we have high oltp system that has dataguard setup with physical and logical. We are planning to build a datawarehouse and have streams setup for data feeding into the datawarehouse. Instead of taxing the primary, i was wondering if i could set up the physical standby as the source for my streams (basically configure the capture process on physical standby).
    Appreciate your help in advance!
    Thanks

    Thanks for the reply Tekicora
    This means then On the primary, I will have another destination that I send the archives to (In addition to Physical) that will be my source database for streams where I can configure capture process. if this understanding is right, then i have the following questions
    1) Can i use cascaded standby to relieve my primary from having another log destination and use that database for the source
    2) Do you know if PSB can be used as source in 11g? because we are planning to move to 11g soon.
    Thanks
    Smitha

  • How to configure returns process if ware house management is configured

    hi,,
    sap gurus,
    how to configure returns process if ware house management
    is configured.
    bcz total ware house management is configured but
    not with returns process
    plz help me on this.
    regards,
    balajit
    09990019711

    In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
    if batch creation is set to manual, enter a manual batch no & proceed.
    But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
    Hope this helps.
    Regards
    Mithun

  • MRP configuration and process

    Dear MM Guru,
    i have to configure and process MRP.
    can anyone tell me the steps.
    regards,
    santosh jaiswal

    Check the below Links
    http://www.sap-img.com/pp010.htm
    http://www.help.sap.com/printdocu/core/Print46c/en/data/pdf/MMCBPCBP/MMCBPCBP.pdf

  • How will i configure consignment process

    how will i configure consignment process...

    Hi,
    Consignment Process
    Scenario -
    1. Client creates a consignment order for their distributor.
    2. The consignment stock sits at the distributor location. The distributor sells some of this stock to end customer.
    3. Client creates an issue order for this quantity, this order has end customer as the ship to as well as bill to parties.
    4. When the goods are delivered against this order, the consignment stock is reduced.
    5. Client then creates an invoice for the end customer.
    SAP Solution -
    1. Create Cosignment fill up order of type KB with distributor as sold-to, ship-to and bill-to and payer.
    2. Create delivery for this order and do PGI, which shifts this stock to u2018customer consignment stocku201D (special stock w).
    3. Assumption - the master data for the end customer exists in the system and has all mandatory partner functions defined.
    4. Create a consignment issue order of type KE, which has sold-to as the distributor and ship-to, bill-to as the end customer.
    5. Create delivery and do the PGI, which reduces the consignment stock.
    6. Create invoice, which has the end customer as bill-to and the distributor as u2018payeru2019.
    Assign Points if helpful.
    Thanks and regards,
    Naveen Dasari.

  • Need help to write a query in automation process

    i want to run the scripts in automation process.Is anyone tel me wat is the solution for it?
    how to run this scripts in automated process?
    Edited by: 927851 on Apr 19, 2012 9:56 AM

    Hi
    If you are unix user...
    you can use script like below:
    # $2 is the output filename, $1 is the .sql script
    runsql()
        sqlplus -s user/passwd/@somewhere <<EOF  > $2
        start $1
        exit
    EOF
    runsql file1.sql logfile1 &
    runsql file2.sql  logfile2 &
    runsql anotherfile.sql logfile3  &
    wait

  • I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

    I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

    You should call Apple but you should get an email from Apple. I got one a few minutes ago and this is what they said about AppleCare+ :
    Thank you for your recent iPhone 5 purchase at the Apple Store.
    We would like to let you know that every iPhone comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary support. AppleCare+ for iPhone extends your coverage to two years from the original purchase date of your iPhone and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee.
    We noticed you weren't given the opportunity to add AppleCare+ to your iPhone. If you would like to extend your coverage for only $99, please reply to this email by September 21st.
    After that date, if you would still like to purchase AppleCare+ within the first thirty days of receiving your iPhone, you can call AppleCare at 800-MY-IPHONE or visit an Apple Retail Store.
    Thank you for shopping with Apple.
    Sincerely,
    Apple Online Store Team

  • No Context configured to process this request

    I am getting the following error when i start the apache Server. I have deployed inside the webapps folder. But when i check it from the browser it is saying the following error.Please tell me .
    message No Context configured to process this request
    description The server encountered an internal error (No Context configured to process this request) that prevented it from fulfilling this request.

    post the name of the root folder of your web application (ie the topmost directory of your web application inside webApps) and what's the path you have specified in the browser to access your web application?
    ram.

Maybe you are looking for