Configuration for MRP Eliment Data

Dear Experts,
For a particular material in Stock and Requirement Screen( MD04) its showing as :
Date MRP element MRP Element Data
11.12.2008 SLocSt 1006 SLoc: not plnd
What is the configuration please explain?
Thnx
Prosenjit.

Hi Expert,
In my PP-PI senerio, for a particelar material (HALB) in stock & requirements screen showing as :
Date MRP element MRP element data
11.12.2008 SLocSt 1006 SLocSt not plnd11.12.2008
SLocSt not plnd Can anybody tell me please what is the configuration ?

Similar Messages

Planning Plant & Production Plant configuration for MRP

Hello PP Guru's ,
What is the configuration required for Planning ( Trading ) Plant & Production Plant for MRP . In the Planning plant only MMR
is available and no other master data . My production is MTS and planning without final assembly .
Regards,
Jaya

Hi DSK,
If 1, 2 , 3 ..... 20 plants are my Planning plant including depos XX   is my production plant how needs to fill the following
Under what Plant i need to give all these details in OPPQ for special procurement
1 .Production plant " "   / Planning plant
    SPk 40
   Procurement type F
Under Special procurement TAB
Special procurement " U "
Plant   " is this Production plant "
As Bom component tab : should i tick direct production ( production plant )
issuing Plant " is this production plnt "
Jaya
Edited by: jaya vimal on Jun 12, 2010 7:58 AM

'Form View' Component in VC configuration for From & To date

Hi Experts,
In VC
I am struggling to fix this from Morning,But can able...
My requirment is to develop a Barchart which is based on a BW Query....
The input variable for the query is From/To date..
So user enters From and to date and wants to analyze chart for that date.
For that reason..
I draged 'Form View' object in VC but can't able to format with From and To date
Please advise

Hi
Thanks for the update
Why do i need to use data service...i am using the input form view..directly
User will input Dates (To & From) and that dates has to be passed to BW Query and resluts should be displayed in bar chart
Thansk

871 Switchport Configuration for Phone and Data

I am having a problem connecting my 7960 to a switchport of my
871 (12.3(14) Advanced IP Services). When configured as shown, the phone is correctly placed into vlan 3, but
a PC plugged into the phone does not end up into vlan 800, but rather vlan 1.
interface FastEthernet1
switchport access vlan 800
switchport mode trunk
switchport voice vlan 3
switchport priority extend trust
If I remove the switchport mode trunk, the phone ends up in VLAN 800.
What is the proper configuration on this 871 to have the phone in vlan 3, and
the PC plugged into the phone in vlan 800?
Thanks.

Hi,
The only thing you need to change is to add the command "switchport trunk native vlan 800"
The reason the PC is showing up in vlan 1 is because that is the default native vlan for the trunk, and thus is the only vlan that is untagged. Since the PC doesn't understand dot1q tagging, its DHCP requests will wind up being received in vlan1 on the switch. Once you change the native vlan to 800, the PC should correctly connect in vlan 800.
HTH,
Bobby

Foriegn Trade and CIN configuration for SD

Hi all,
Can anybody please send me step by step procedures regarding
1. Foriegn trade configuration in SD Module wrt India.
2. CIN configuration in SD Module.
Regards,
Khan

You require to do thenecessay configuration for Foreign Trade Data:
IMG --> Sales and Distribution --> Foreign Trade/Customs --> Basic Data for Foreign Trade --> (Do the necessary configuration here)
In most probability, it will not default, but it is required to be maintained in Invoice (based on configuration)
Regards,
Rajesh Banka
Reward points if helpful.

How to configure wokflow for MRP generated & manually created PR

Dear Gurus,
I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
I have some questions regarding workflow
1) How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
2) Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
Looking forward to your reply,
Thanks in advance,
Best regards
Tushar
SAP MM Consultant

Dear Mike,
Thanks for your reply, & sorry for not responding on time.
Here are my constraints:
1) Not a single component of HR module will be implemented.(Project management decision:-()
2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
"An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
Program=SAPLSWF3
Include=LSWF3U05
Row=22
Module name=SWF_WFP_REPOSITORY_CONTENT_GET
The same dump is coming while accessing SWF_WFPVW table from SE16.
Request to Mike & all of you, help me in this regard.
Thanks in Advance,
Regards,
Tushar

ALE Configuration for Transactional Data (Purchase Order)

Dear Experts,
I want to configure ALE for Purchase Orders(Transactional Data).
For that:
I have done neccessary Condition Records at NACE with necessary Output Type Configuration. Configured Port and Partner Profile with Message Types: ORDERS and ORDECHG (as Outbound Parametrs) .Assigned those Message Types against defined Sender and the Receiver at Customer Distribution Model . Configured Port and Partner Profile at the Receiver System also.
Now I have 2 queries.
i) Is this much of ALE configuration is enough for Transactional Data for communication between 2 systems or I have to do something more?
ii) For Master Data we configure Change Pointer(we can see field assignments against Change Document Object at BD52 for Master Data Messaage Types) . Is it necessary to configure Change Pointer for Transactional Data or it will autometically handled by the system(field assignments cannot be seen against Change Document Objects at BD52 for Transactional Data Messaage Types)?
Regards
Arnab

Hi kumar,
what Alexander said is absolutely correct .
from your second question no master data distribution configuration is required for the transactional data distribution.
let us know once if you face any problems.
~linagnna

CTS+ Configuration in PI 7.4 for SLD specific data

Hello Guys,
I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
Its very urgent.

Did you happen to see this document of a CTS+ configuration for 7.3 (should be fairly the same for 7.4)? CTS+ Configuration for PI 7.3
Steps 1.2 and 8.2 have references to roles.

Database is configured for Data Guard

I am run a UTF8 conversion on a development database that has been cloned from Data Guard. There is a warning in Migration Status: "Database is configured for Data Guard" What is the DMU looking at to determine this? The database is open in read-write mode and it behaving like a primary database (I run the DMU scan and run updates to fix invalid representations). I would like to know what settings I need to update.
Is this preventing me from converting tables using CTAS? When I try to select this for all tables I get the message, "The DMU does not support the conversion method "Copy data using CREATE TABLE AS SELECT" for tables that are involved in an Oracle Streams process, like capture or apply. Use another available conversion method for the table"
Thanks,
Ben

The DMU checks if the parameter DG_BROKER_START is set to true.
The problem with CTAS is independent from Data Guard. The DMU checks for tables that:
- are source of asynchronous Streams capture, or
- have update conflict handlers, or
- have DML handlers, or
- have conflict resolution parameters
The above tables are considered configured for Oracle Streams and are not supported by CTAS conversion method. This is because the CTAS method creates a converted copy of the table and drops the original. The DMU is not capable of moving the Streams configuration information from the old table to the new one.
Thanks,
Sergiusz

Can SSD which is configured for intel rapid start be used to store data files as a normal drive

Can SSD which is configured for intel rapid start(No Smart Response) be used to store data files as a normal drive
Lenovo ideapad u310 with 24 GB SSD Partition , only 4GB has been configured as Hibernate partition for Intel rapid start, rest of the 18.36 GB has been labelled as Healthy(Primary partition).Can this 18.36 GB of SSD be configured to store data files on it without affecting Intel rapid start.

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Data Source configuration for ADF BC application

Hi,
I am working on a POC using ADF BC.
I want to configure a data source in weblogic server and want to connect to that data source in my ADF BC application.
Please let me know how and where to configure this data source in ADF BC app.
Thanks,
Praveen

Praveen,
Right-click your Application Module, choose "configurations" Then, you can edit your configuration to specify a data source instead of JDBC URL.
[url http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcservices.htm#CHDJDBJB]The documentation can tell you more.
John

Use of report RMMDDIBE for MRP area creation

Dear All
I have this requirement where i have to extend already created materials to storage location MRP areas. In SAP documentation i found that, standard report RMMDDIBE can be used for this.
If anyone has worked with this earlier, kindly let me few things abt this report
1- Exact fucntionality of this report
2. How to run this report
3. Is it a configuration or just front end report which has to be run everytime
4. can we make front end batch job
Any help on this would be great
thanks
bals

Hi Murugesan,
1. Exact fucntionality of this report
The mass create & change MRP Area data instead of manually doing via material master MRP1 view
2. How to run this report
Select the materials and plant that you want to create or change the MRP areas, then select where to copy the MRP area data from, i.e. copy from material master MRP views, copy from other MRP area data.
For example you can copy the material master data when creating, then use "create/change the data" to update some of the fields.
3. Is it a configuration or just front end report which has to be run every time
Yes, you must have configured MRP area and assigned storage locations in the IMG. RMMDDIBE is a mass master data update program, it is not configuration.
4. can we make front end batch job
No real need, this is a mass create/change program.
James

Help required -for MRP Run at storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
   Thank you in advance.
    Regards,
    Krish.

Hi,
     Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
Hope It will clear Your Problem
Regards
Sunil Kumar

Help required !! For MRP at Storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
Thank you in advance.
Regards,
Krish.

Hi Krish,
Go to following IMG path and check out your settings -
IMG>>>Production>>>MRP>>>Master Data>>>>MRP Areas>>>
(1) Activate MRP for MRP Areas -
Is that activated?
(2)Define MRP areas>>>> Do setting s as per Storage Location
Then run MRP.
MRP Areas
In this IMG activity you define whether MRP is to be carried out with MRP areas. In addition, you define the MRP areas for each plant in which you would like to carry out this type of materials requirements planning.
The MRP area represents an organizational unit which carries out materials requirements planning independently. The results of the planning run are displayed specifically for each MRP area. An MRP area can include one or several storage locations of a plant or stock with a subcontractor.
You can assign a material to various MRP areas.
Basically, there are three types of MRP areas:
Plant MRP Area
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant. You can also group several storage locations into one MRP area by creating an MRP area and assigning the storage locations. These storage locations are then planned together.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor. Using an MRP area, it is possible to plan the components to be provided in subcontracting, by defining an MRP area for each subcontractor and assigning the components to be provided. You can therefore plan the requirements to be provided for these components for one subcontractor separately from the usual requirements.
Up to now, MRP at plant level had been carried out. The various requirements were combined in the planning run and procurement elements were created for these pegged requirements with unknown sources.
The introduction of MRP areas enables you to carry out material requirements planning and know the source of the pegged requirements and to be able to distinguish between them. The source of the pegged requirements can be, for example, production on a particular assembly line or a subcontract order.
Material requirements planning for each MRP area allows you to have specific control over the staging and procurement of important in-house production parts and purchased parts for each shop floor and assembly area.
Hope this will give you more idea about the same.
Satish

MRP SCHEDULING DATES IN R3

Hi guys,
I need to understand How MRP scheduling dates are calculated for <b>external procurement</b>
I understand scheduling date is calculated from the following...
Purchasing processing timePlanned delivery timeGR processing time...
1. What is the default scheduling either backward scheduling or farward scheduling??
2. Where we can set as per our requirement??
3. Delivery date is calculated from individual requirement date?? or It is calculated from MRP running date for all the requirements??
For example the scenario is as follows:
The requirement is for continuourly for 3 days from today i.e.21.09.2007,22.09.2007 and 23.09.07...
Supposing purchasing processing time is 0, Planned delivery time is 10days and GR processing time is 0..
What will be the delivery date of each above requirement???
Can any one throw some idea on this...
sundar...

Hi
Please refer the link explaining the MRP configurations.Please go thru the file and reply if you have any specific doubts.
http://www.sap-topjobs.com/SpecialPP/overviewdoc.pdf
Regards
RamakrishnA

Configuration for MRP Eliment Data

Similar Messages

Maybe you are looking for