Configuration of Mopz in solution manager 7.1

Hi,
Can you please help me in configuration of Mopz's in solution Manager 7.1 so that i can do step by step installation.
Thanks & Regards,
Sreeram

Hi,
I can give your the overview, but you need to go thru the guides as well in order to get the full pic.
If you've completed solman_setup -> system preparation and basic configuration, your MOPZ is ready, where at this time, you've entered your S-USer info, SLD<->LMDB sync is performed and etc..
What next is you need to assign your SAP System to correct Product, Product version in SMSY + LMDB. Once done, assign your SAP System (or so call Product System) to logical component (in SMSY). After that, create a landscape solution in solman_workcenter and assign your logical component to it.
You can run the MOPZ in solman_workcenter -> change management.
Hope it helps,
Thanks,
Nicholas chang

Similar Messages

Configuration of MOPZ on Solution Manager EHP1 ST 400 Patch 18

Dear Team,
Request you to let me know the Procedure to Configure MOPZ on Solution Manager EHP1 ST 400 Patch 18, i am struck in between, if any one can send me any document regarding this will be highly appreciated.
Regards,
Adarsh Kumar

Hello,
You can have a look at the Maintenance Optimizer quick startup guide at the Wiki:
https://wiki.sdn.sap.com/wiki/display/SM/Overview
Please let me know if you have any comments / feedback about the Wiki.
Best regards,
Miguel Ariñ

How to configure maintanace optimizer in solution manager

Hi,
How to configure maintanace optimizer in solution manager.
Regards,
Asif

Hi,
Check this link... it has complete step by step configuration of Maintenance Optimizer...
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/90454eea-3564-2a10-d0b9-c84d468365ab
http://help.sap.com/saphelp_smehp1/helpdata/en/46/418970cdb45fabe10000000a1553f7/frameset.htm
https://websmp210.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp210.sap-ag.de/~sapidb/011000358700000086862008E.sim
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1787522650DB00553277662805589317End?blog=/pub/wlg/8217
Also, http://service.sap.com/rkt-Solman --> Technology Consultant & System Administrator -> Technical configuration ->configuaration of Basic settings in solman, Mopz simple usage and normal usage
Thnx,
Waseem.

CRM Related Questions for Configuring Service Desk in Solution Manager

Hi All,
We have 3 requirements while configuring service desk in solution manager:
1) Is there any possibility that we can restrict view of messages in solman for different teams. E.g: Finance Support team should not view message raised for Material Management Team ?
2) Is there any possibility in service desk that we can assign message on the basis of location e.g: message raised for finance from location A should go to different support team of finance and for location B, it should go to different finance team ?
3) Is there any possibility that we can make some question necessary while user is raising very high priority message from satellite system e.g: when we raise Very high priority message on service market place, we need to answer few mandatory questions ?
I tried to search these functionality in standard scenario but I am not able to find something relevant. Please suggest.
Thanks
Sunny

Hi Rama,
I Need to configure the feature to generate a ticket to SAP directly in VERY HIGH priority.
Could you please help me out into this. If you have any doc related to that Please send me.
Thanks in Advance!
Regards,
Prabhat Singh

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

How to configure satellite system in Solution manager

Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
Asif

Hi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar

Where can i find the configuration guide for a solution manager beginner

dear all:
as the title,expect your reply.
thanks!

Hi Zuiyong,
the configuration guide of SAP Solution Manager contains only same general information like strategy, required SPs in sat. systems, authorization and notes.
The 'REAL' configuration guide can will find in the system in the transaction SPRO->Referenz.IMG ->Solution Manager->Solution Manager-> Basic Settings. These settings you have to make to use standard SAP Solution Manager. In the are enhanced settings you can find additional settings for additional features.
Regards,
Udo Lang

Configuration Guide in SAP Solution Manager

Hi all,
I'm reading documentation on a CRM scenario (Investigative Case Management : ICM). It says that the ICM configuration guide is assigned to the scenario 'Criminal Investigation Processing' (Public Security) in the SAP Solution Manager.
I don't have access to the SAP Solution Manager but wanted to know if I could find this ICM configuration guide somewhere on the SAP Market Place.
Alternatively, if I could access a SAP solution Manager system, how could I access this ICM configuration guide?
Thanks a lot in advance
Best regards
Stephanie

Hi
this will solve ur prob
https://websmp210.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
Regards
Prakhar

Configuration of CCMS through solution manager

Hi,
I am trying to do first time the configuration of CCMS auto alerts through Solman EHP1,I mainted the satellite system in solution manager.mine environment is linux with maxdb.how to proceed for the same to start.
Thanku

Hi,
Thanks for inputs.
1) Created the CSMREG User in Solman system
RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG User
2) CSMCONF Start File -- in Solman system
RZ21 -->Technical Infrastructure --> Configure Central System -> Generate Configuration File for Agents (I saved the CSMCONF file)
3)I downloaded the CCMAGENT_7-10005984.SAR file from service.sap.com ,from here onwards iam bit confusing how to proceed for the same. (Iam having this directory in satllite system /usr/sap/TST/DVEBMGS00/log/sapccm4x)
Thanku

Solution manager service desk - configuration -pls help

Hi Forum,
I have completed basic configuration of service desk (solution manager 7.1) and able to realize things like create/process/confirm message and email notification after automatic support team determination (which works well based on component). However facing below issues and have few requirement.
1. Once the support team gets determined automaitcally based on component field 'Support Team' gets filled with a predeifined value which is obvious however furhter to that when i wish to change the 'Support Team' manually its grayed out i.e. i am not able to change it as it goes to non-edit mode. how to solve this issue?
2. In mail notification if message is raised from the satellite system or solution manager itself i am receiving the details of the system e.g. products installed and software components which makes message unneccesarily long. Can i configure system to produce e-mail noification without system info so that a notification can be kept short. (This is required as client needs to use service desk for internal purpose and not happy to see the system information as its increasing the length of the message)
3. While creating organizational structure in /nppoma_crm . i have created organizational unit/Support team/support employees..now in support team determination e-mail notification goes to the determined supoport team (to bp for which e-mail id is entered) however it doesnt goes to the employees mapped under support team as members (pls note bp for each member is maintained along with the e-mail id)
4. I would like to know the method used for automatic sold-to-party determination as like support team determination & is it possible to reset the number range as while test plenty of messages got created e.g. 8000000584/8000000585/8000000586 to be reset to 8000000001 again so client can start from 8000000001.
Please help by sharing your thought on this at earliest.
Regards,
Rupesh
Edited by: rupesh_modi12 on Dec 23, 2011 12:25 PM

Hi Jitu,
Thank you very much for sharing the links. However sad to say after succesful configuration still the issues mentioned below remains same :
1. Once the support team gets determined automaitcally based on component field 'Support Team' gets filled with a predeifined value which is obvious however furhter to that when i wish to change the 'Support Team' manually its grayed out i.e. i am not able to change it as it goes to non-edit mode. how to solve this issue?
2. In mail notification if message is raised from the satellite system or solution manager itself i am receiving the details of the system e.g. products installed and software components which makes message unneccesarily long. Can i configure system to produce e-mail noification without system info so that a notification can be kept short. (This is required as client needs to use service desk for internal purpose and not happy to see the system information as its increasing the length of the message)
3. While creating organizational structure in /nppoma_crm . i have created organizational unit/Support team/support employees..now in support team determination e-mail notification goes to the determined supoport team (to bp for which e-mail id is entered) however it doesnt goes to the employees mapped under support team as members (pls note bp for each member is maintained along with the e-mail id)
4. I would like to know the method used for automatic sold-to-party determination as like support team determination & is it possible to reset the number range as while test plenty of messages got created e.g. 8000000584/8000000585/8000000586 to be reset to 8000000001 again so client can start from 8000000001.
Regards,
Rupesh

Solution manager system monitoring configuration

Hi
I am configuring system monitoring in solution manager (Oracle / Solman 7.0 EHP1 / Windows 2008 / VM)
I have added a satellite system to solution manager thru CCMS and CCMSPING agents. These are visible in RZ21 / Technical infrastructure / Overview. This has also been added in SMSY, SMSY when refreshed pulls out data from the satellite system. However I am having trouble with the transaction SOLUTION_MANAGER. This is where I setup system monitoring.
Here I find the solution maanger system however am not able to find the satellite system which I had added.
Thoughts?
thanks
Ravi

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh

Problem in "Diagnostic configuration" in Solution Manager 7 ehp1

Hi All
I try to execute "Diagnostic configuration" step in my solution manager 7.0 ehp1.
I have executed all the basic configuration in my SM.
I executed transaction solman_setup -> select step "Automatic
Configuration" -> "Diagnostic configuration" and appear this error
message:
Service cannot be reached
What has happened?
URL
http://<hostname>:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding
service is not available.
Must I activate any service from transaction sicf? if yes, which service must I activate?
Thanks in advance for collaboration.
best regards
giovanni

Hi!
We are facing the same problem.
http://xxxxxxxxxxxxx::8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp?APP_ID=ADMIN_INTROSCOPE_AGENT
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
Did you find any solution to the issue? The note 1276263 is not availible.
/Anton Renberg

Configure TMS in fresh installed Solution Manager system

Hi Expets,
I have fresh Installed Solution manager. Configure TMS and now want to configure solution manger so that I can monitor all our SAP system from Solution manager. How I configure our SAP system in solution manager?
Also would like to know after TMS implementation if we like to use ChaRM or CTS+ so what changes required in current TMS setting? Thanks in advance.

Hello,
No Deejoy, I provided you with how to resource to do the things you requested.
TMS is transport Management System.
If you want to manage transports with an enhanced product CTS+ I provided the configuration guide.
If you want to implement ChaRM, I pointed you to the Wiki.
If you want to inegrate CTS+ with ChaRM, I also provided you with resources.
And lastly, I directed you to RKT-SOLMAN which can help you configure any aspect of Solution Manager.
But I do not see where I said to manage TMS on Satellite systems you need to implement ChaRM.
Charm was only raised, because you raised it in your question.
You have all the resouces you require to address everything you raised.
This is what is provided in my earlier reply.
Regards,
Paul

Solution manager charm configure

hello everyone
i want to configure the charM scope with our R3 and BW at two domain .
R3 landscape
                    DEV(101sandbox,201-develop,301-customizing ,800unit testing)
                    QAS(800- testing)
                    PRD(800-prduct)
tranport   from DEV TO QAS and delivery to PRD ,also you can export the object from QAS to PRD for special .
domain controller is PRD
BW landscape BWD(client 100)--BWQ(client 880)BWP(client 880)
domain controller is BWP
if we use the charM for manager the change requst ,how we configure in all system for prepare the charM like the stms configure .
we notice our test system and prd system have same client number ,so it is ok for configure ?
expect your help!
thanks a lot!
frank

Hi,
1 QAS client and PRD client can be the same(need not to be different).
2. Make sure that the system landscape you mention under system landscape tab of SOLAR_PROJECT_ADMIN should match with TMS configuration of Solution Manager.(This is very important).
You should create a maintenance project with system landscape DEV-201->QAS-200->PRD-200 using SOLAR_PROJECT_ADMIN. Repeat this step for BW also.
   You need to configure TMS of Solution Manager in Client 000 as follows:
    SLM->DEV-201->(Consolidation Route)QAS-200->(Delivery Route)PRD-200
    SLM->BW-100->(Consolidation Route)BW-880->(Delivery Route)BW-880
No more document is required better than SPRO. Just follow this SPRO path to configure TMS:
SPRO->SAP Solution Manager->Configuration->Scenario-Specific Settings->Change Management
->Change Request Management->Standard Configuration->Transport Management System(Read IMG activity of each step).
Let me know if you have aby issues.
Regards,
Sanjai

Configuration of Mopz in solution manager 7.1

Similar Messages

Maybe you are looking for