Has stopped providing A/V warning on launch

Whenever I opened FCE 4.0, the A/V warning would show up (as I had instructed it to by NOT checking "Do Not Show.." in User Settings. But now, without any changes that I am aware of, when I open it just goes to the project I am working on (as it did before, after I instructed 'continue' if I did not have the camera connected.).
This is a minor problem EXCEPT ... concomitant to this event is the fact that I can not save my project, cannot "Print to Video". I have tried it both 'automatic recording' and manually starting camera in VCR mode. I have done this often before, no problem. My camera is a Sony PD-150.
Now, when I use the 'automatic recording', the camera does respond to the computer; but only shows Index mark; does not record. I have checked the camera. It is recording camera shots and playing back normally.

That is most likely because you have not chosen the correct Easy Setup.
When you trash the preferences everything reverts to its "as new" default settings.
The default Easy Setup is "DV-NTSC" so if you are in the UK etc. you have to change it to "DV-PAL".
Also this default setting is only suitable for footage where the AUDIO has been shot at 16bit or 48KHz.
If your camera is set to 12bit or 32KHz your Easy Setup should be "DV-NTSC (or PAL) 32KHz".

Similar Messages

Excel has stopped working when I try to launch Excel 2013 Powerpivot

Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
My system is a Windows 7 machine, 64 bit
I previously had Excel 2010 32bit with 32 both Powerpivot installed. However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
I took a look in the Windows events logs and found:
Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
Exception code: 0xc0000005
Fault offset: 0x00000000002ba203
Faulting process id: 0x3e8c
Faulting application start time: 0x01cf52a7644eda9d
Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
Report Id: afa4f824-be9a-11e3-94ac-415645000030
I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

You can go to check the dll file, what's size of this dll file?
If the file size is 0 byte, you can check the link below:
http://forums.steampowered.com/forums/showthread.php?t=2735528
Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Wind Zhang
TechNet Community Support

A/C adaptor on my Airbook was working intermittently and now has stop providing juice. Any ideas what the problem might be and any ideas how to fix it.

A/C adator has stopped working. Any ideas what could be the reason and how to fix it.

The 'fix' is a replacement if the one you have is faulty. Bring the MBA and charger to an Apple store genius bar for a free evaluation.
Ciao.

Why Has iTunes stopped providing glee season 3 after the 6th episode?

I have been downloading the glee season 3 TV shows on iTunes for 5 months now but iTunes has stopped providing any more glee after the 6th episode! I have waited more than 2 months for more episodes but none have come out! I really love glee and I'm traveling at the moment! I'm in England and they don't have glee on TV so I buy it on iTunes But I have waited and waited for more episodes to come out but they have all stopped after the 6th episode!
I have looked on the reviews of glee season 3 tv shows on iTunes and it seems other people are having the same problem as me but no-one will help!
Please can someone help me! I'm getting desperate

I just looked and there are ten episodes available for purchase on Season 3. Maybe it makes a difference what country you are in but I am the US.

Licensing has stopped working is just the beginning...

About a month ago I got the error "Licensing has stopped working" when I tried to launch Photoshop CS3. I followed the steps on the forum
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
finally uninstalled and reinstalled and my whole Creative Suite was working fine.
Suddenly a few days ago I got the same "Licensing has stopped working" error and decided since none of the other steps helped the last time except the uninstall, that I would uninstall and reinstall AGAIN.
Now when I try to reinstall I get the following message:
Installation/Reinstallation Completed
Some problems occured during installation. Please see below.
Summary
Successfully installed 2 components:
Adobe Acrobat 8 Professional
Shared Components
Errors: 6 components
Adobe Creative Suite 3 Design Standard
Component install failed
and so on for Illustrator, Indesign, Photoshop, Version Cue CS3 Server and Shared components.
Support will not help me because I do not have CS5.5. If you have had this happen to you please offer any advice. I was not planning to upgrade just yet.
Other information:
I am running CS3 Creative Suite on Windows Vista. It was purchased through the student program while I was in college. It was working perfectly fine until the licensing issue first appeared a month ago.

Installation and Licensing Problems
Mylenium

HT5278 since I have loaded the update, my TIme Warner cable has stopped working. It gets stuck at launch.

SinceI have loaded the update, 5.1.1 my TIme Warner cable has stopped working. It gets stuck at launch all I see is the logo of TWC. I have reinstalled it, rebooted my IPAD.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Licensing has stopped working error durinng launch of Photoshop CS3

I cannot get rid of this error message during launch of PS CS3. I tried uninstalling running the CS3MacClean Script, reinstalling, ... same problem. The same installer and serial number works fine on a clean system so I know there must be a file or two that the cleanup script doesn't remove.
Anybody know what files to delete?

After installation, a system upgrade, machine migration, backup restore, or some other system event(s), trying to launch Adobe applications on Mac OS X results in the error "Licensing for this product has stopped working." You may see error numbers after this message, such as "150:30".
Solutions
Do one or more of the following solutions. Note, Adobe Trial Software that displays the error can not be restored to run.
Solution 1: Run the License Repair Tool
Close any Adobe applications.
Download the License Repair Tool:
www.adobe.com/support/contact/licensing.html
Run the License Service Update.
1. Double click the LicenseRecovery111.dmg
2. Double click the LicenseRecoveryLauncher.app.
3. Enter your administrator username and password when prompted and click OK.
4. Follow the on-screen instructions.
Start your Adobe application(s).
Important: The patch applies to Creative Suite 3 or 4 products, Acrobat 8 or 9, Photoshop Elements 6 or 8, Director and Technical Communication Suite. If your issue was not resolved on the first attempt, run the patch again and enter option 0, when prompted to do so.
Solution 2: Delete the FLEXnet Publisher preferences folder
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Quit all Adobe applications.
On your startup disk, locate and rename, or copy to the desktop and then delete, the following folder:
/Library/Preferences/FLEXnet Publisher/
Start your Adobe application(s).
Solution 3: Repair Disk Permissions
Launch the Apple Disk Utility:
/Applications/Utilities/Disk Utility.app
Select your startup disk.
Click Repair Disk Permissions.
Note: This can take considerable time. For more information about using Disk Utility, consult Apple's website.
Start your Adobe application(s).
Solution 4: Reset your permissions on the FLEXnet Publisher licensing service folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/FLEXnet Publisher/
Solution 5: Reset your permissions on the Adobe PCD folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/Adobe/Adobe PCD/
Permissions Instructions:
Close out of all Adobe applications. Follow the directions below to modify permissions to the folder.
Note: This solution requires administrative privileges on your computer. You will need to provide administrative credentials.
On Mac OS X 10.4
Using Finder, navigate to the folder to be modified.
Control+Click the folder, and then select Get Info.
Expand the Ownership & Permissions section.
Click the Details option to show the various owner and group options.
Verify that you have Read & Write permissions.
Click the lock icon next to the Owner field, choose yourself as the Owner, type in your administrator username and password when prompted, and click OK.
Change the Owner to system.
Change the Permission to Read & Write for Owner.
Click Apply To Enclosed Items and click OK to the warning dialog.
Type in your administrator username and password when prompted and click OK.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
On Mac OS X 10.5
Using Finder, navigate to the folder to be modified.
Control+Click on the folder, and then select Get Info.
Expand the Sharing & Permissions section.
Click on the Details option to show the various owner and group options.
Click the lock icon in the lower right corner. Type in your administrator username and password when prompted and click OK.
Change your username to have Read & Write permissions.
Change admin to have Read & Write permissions.
Change Everyone to have Read & Write permissions.
Click the Gear icon and select Apply To Enclosed Item.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 6: Remove the SQLite journaling file.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
The journaling file exists only under specific circumstances where a client is accessing the database file with certain options enabled. If the file does not exist, continue to the next solution.
Using Finder, navigate to:
/Library/Application Support/Adobe/Adobe PCD/cache
If present, delete cache.db-journal.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 7: (Acrobat 9 only) Reinstall on a non-case-sensitive file system.
Adobe applications are not supported on an OS formatted with a case-sensitive file system. If you attempt to install an Adobe application on a case sensitive volume such as a UFS, HFS+ case sensitive (HFSX) or SMB formatted drive, you get an error that the file system of the setup drive is not supported. Only Acrobat 9 doesn't display such error message and allows you to install the application, but attempting to launch Acrobat 9 results in the error "Licensing for this product has stopped working (error code 130:9)." The drive needs to be reformatted to a non-case-sensitive file system.
To check if MAC OS X is formatted with a case-sensitive file system :
From the Apple menu select About this Mac.
Click More Info and under Hardware select Serial-ATA.
Select the drive Acrobat 9 has been installed on and check the file system in the list. Note if the file system is case sensitive.
Alternatively, use the Disk Utility to check the file system:
From Applications > Utilities, launch the Disk Utility
Select the disk Acrobat is installed on and check its format.
Solution 8: Contact Adobe Technical Support
Adobe Technical Support can obtain logs from your machine to determine additional information about the failure. Contact Adobe Technical Support if the information provided has not helped to resolve your issue.
Additional Information
The Flexnet folders/files required to run Adobe applications can get corrupted, or have permission settings problems, if moved from one machine to another, or through a system restore from Time Machine. Flexnet service licensing failures can't be resolved by re-installating the appliaction, nor will the Adobe CS3 or CS4 Clean Scripts solve this problem. If permissions issues prevented the FLEXnet licensing service from launching, accessing its data, or communicating with Adobe processes, the licensing failure is expected.

When I launch PH in CC, I get a window that pops up saying, PS has stopped working, this it shuts down. Is there a fix.

When I launch PH in CC, I get a window that pops up saying, PS has stopped working, this it shuts down. Is there a fix.

These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

ITunes has stopped launching when I plug in my iPhone via USB

Two things have stopped working with my iPhone recently.
1. iTunes no longer launches automatically when I plug in my iPhone to my iMac via USB.
2. The iPhone Notes app has stopped syncing via USB lead between the iPhone and the iMac.
I have tried closing applications, and rebooting both the iPhone and iMac, but this makes no difference.
I'm running OS X 10.6.8 on my iMac.
My iPhone is a 3G running iOS 4.2.1
Can anyone help?
This sounds like a bug introduced by a recent software update. Is anyone at Apple listening?

For point 1 have a look on your Mac:
Settings | System | Users & Groups | Your Account | Login Items
and see if iTunesHelper is there and ticked. If it has a yellow warning symbol next to it it has lost were to find this app which brings up iTunes when you connect devices.
It could have been messed up by an upgrade of iTunes. To set it up again you can add it to the 'Login Items' again. The iTunesHelper application is buried inside the iTunes application special folder:
Applications > iTunes > Contents > MacOS > iTunesHelper
you can navigate to it by looking at the package contents for iTunes (right click it). You can't add it by choosing the '+' button because you have to look inside iTunes.
Open Users & Groups, your account, Login Items then next to it
Open a Finder window navigate to iTunesHelper like above and then drag icon for it into the Login Items window.

Unable to launch Adobe Premiere Elements 10 - Says AdPrE10 has stopped working

I downloaded Adobe Premiere Elements and bought a product license via my workplace.
I was able to install successfully, but when I launch the program, it says Premiere Elements 10 has stopped working. I have not been able to launch the program. I was having the same issues when I was using the trial version. Please help,
I need to work on editing videos rightaway and it is ridiculous that a program that I have paid money to buy is not even launching to begin with. I can't even imagine the trouble I am going to have trying to use this version.
Please don't send me thousands of instructions on downloading and installation. I have been able to download and install and added my serial key number. I see the icon on the desktop, It just doesn't launch. See error image.
Thanks
VidishaP

I am not looking for sarcasm.
Let's address that for a moment.
I replied to your OP about 8 mins. after it was moved here. Much of that time was gathering the links to those articles, most of which I wrote, and have bookmarked. Each contains several links (one, probably 15 links).
In ~ 30 mins. you report that there was nothing helpful in any of those articles or the ones linked to, from them. Though I wrote the articles (most anyway), it would have taken me that long to read each article, and just open the links, with almost zero time to do any of the things suggested. Just tracking down error and warning messages in Event Viewer, and following the links in any of those, would have taken at least that long.
You state that you had the same issues with the trial version.
I had the same issue when I was trying to use the trial version.
In the world of troubleshooting, this is a pretty fair indicator that there is something wrong with your computer, or your OS. If nothing else, it indicates that a problem existed before your recent installation of PrE.
Now I will have to search for return/exchange options since it is not launching by double clicking like every program does.
Actually, Adobe makes this part very easy. Just return their software, within 30-days of purchase, and you get your money back.
Sorry that I could not help you,
Hunt

I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

Hey Todd Rubenson,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

"Skype has stopped working" upon launch (7.3) Windows 7

I have been using Skype for more than a year with no issues but today when I launched Skype it came up with a message saying that "Skype has stopped working" and asked me to send information to Microsoft. Skype will not open at all - this message appears a few seconds after opening it. I have tried opening using admin and reinstalling but Skype still refuses to open.
The error log is as below:
Log Name: Application
Source: Application Error
Date: 05-04-15 12:29:29 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: user-PC
Description:
Faulting application name: Skype.exe, version: 7.3.60.101, time stamp: 0x5512d489
Faulting module name: WININET.dll, version: 9.0.8112.16526, time stamp: 0x528551da
Exception code: 0xc0000005
Fault offset: 0x0003cb7a
Faulting process id: 0x11c0
Faulting application start time: 0x01d06f485486ef14
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\WININET.dll
Report Id: 954b0e64-db3b-11e4-8404-14dae9ceba14
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-05T02:29:29.000000000Z" />
<EventRecordID>35565</EventRecordID>
<Channel>Application</Channel>
<Computer>user-PC</Computer>
<Security />
</System>
<EventData>
<Data>Skype.exe</Data>
<Data>7.3.60.101</Data>
<Data>5512d489</Data>
<Data>WININET.dll</Data>
<Data>9.0.8112.16526</Data>
<Data>528551da</Data>
<Data>c0000005</Data>
<Data>0003cb7a</Data>
<Data>11c0</Data>
<Data>01d06f485486ef14</Data>
<Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
<Data>C:\Windows\syswow64\WININET.dll</Data>
<Data>954b0e64-db3b-11e4-8404-14dae9ceba14</Data>
</EventData>
</Event>

Try first to update your Internet Explorer to the currently latest IE11 version for Windows 7. http://www.microsoft.com/en-us/download/internet-explorer-11-for-windows-7-details.aspx If updating will still not help, then run this troubleshooting tool to fix connection issues in Internet Explorer. http://support.microsoft.com/en-us/kb/936211

"Skype has stopped working" upon launch (7.3) Wind...

I have been using Skype for more than a year with no issues but today when I launched Skype it came up with a message saying that "Skype has stopped working" and asked me to send information to Microsoft. Skype will not open at all - this message appears a few seconds after opening it. I have tried opening using admin and reinstalling but Skype still refuses to open.
The error log is as below:
Log Name: Application
Source: Application Error
Date: 05-04-15 12:29:29 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: user-PC
Description:
Faulting application name: Skype.exe, version: 7.3.60.101, time stamp: 0x5512d489
Faulting module name: WININET.dll, version: 9.0.8112.16526, time stamp: 0x528551da
Exception code: 0xc0000005
Fault offset: 0x0003cb7a
Faulting process id: 0x11c0
Faulting application start time: 0x01d06f485486ef14
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\WININET.dll
Report Id: 954b0e64-db3b-11e4-8404-14dae9ceba14
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-05T02:29:29.000000000Z" />
<EventRecordID>35565</EventRecordID>
<Channel>Application</Channel>
<Computer>user-PC</Computer>
<Security />
</System>
<EventData>
<Data>Skype.exe</Data>
<Data>7.3.60.101</Data>
<Data>5512d489</Data>
<Data>WININET.dll</Data>
<Data>9.0.8112.16526</Data>
<Data>528551da</Data>
<Data>c0000005</Data>
<Data>0003cb7a</Data>
<Data>11c0</Data>
<Data>01d06f485486ef14</Data>
<Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
<Data>C:\Windows\syswow64\WININET.dll</Data>
<Data>954b0e64-db3b-11e4-8404-14dae9ceba14</Data>
</EventData>
</Event>

Try first to update your Internet Explorer to the currently latest IE11 version for Windows 7.
http://www.microsoft.com/en-us/download/internet-explorer-11-for-windows-7-details.aspx
If updating will still not help, then run this troubleshooting tool to fix connection issues in Internet Explorer.
http://support.microsoft.com/en-us/kb/936211

I recently updated my iTunes to version 10.3.1.55 and when i launch the program it says 'iTunes has stopped working' then another window pop up saying me to close program.HELP!!! ME PLEASE!!

ok i installed new iTunes version 10.3.1.55 and when i launch itunes it says 'iTunes has stopped working' i get to my problem history this is whay i found
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.3.1.55
Application Timestamp:          4deec351
Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.7
Fault Module Timestamp:          4ddeb575
Exception Code:          c0000005
Exception Offset:          00250000
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          1033
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
PLEASE HELP ME!!!!

Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

Itunes launches fine however I cannot connect to the Itunes store. It says that Itunes has stopped working and windows is looking for a solution.

Everything seems fine until I try to access the ITunes store. Then I get a message that ITunes has stopped working and that Windows is looking for a solution. Then it tells me that no solution has been found and closes down Itunes.
I can still sync music / podcasts to my ipod and iphone. I am still getting podcast downloads automatically for the ones I have subscribed to.
This is the first time this issue with not being able to access the Itune stores has happened to me. I was just there 2 nights ago.

Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Has stopped providing A/V warning on launch

Similar Messages

Maybe you are looking for