Configuration setup forLow Value asset 'Investment support measures'

Hi all
User requested us to enable the u2018investment support measuresu2019 option for low value asset for that if any configuration setup is required to enable the option for low value asset.
Please help us to resolve the above issue and attached screen shot for your reference.
Note: In high value asset user is able to view the u2018investment support measuresu2019 option.
Regards
K.Gunasekar

Thanks
1. Our current requirement is adding new grant book leg to LVC Classs.
2. what will be the impact to our existing assets database?
if not can we follow the below step
we will need to create new LVA class so that grant book leg for LVA can be created. In this case, we will need to transfer assets from the existing LVA class to new LVA class. 
Please clarify

Similar Messages

  • You cannot post to asset 150000 0 (investment support measure)

    Hello All,
    I am getting Error while doing KO02 Order settlement
    I selected Cat - FXA and select asset (asset under construction)
    When I am trying to save
    You cannot post to asset 150000 0 (investment support measure)
    with Message Number Message no. AA311
    Regards,
    Kiran.

    Hi,
    You cannot directly include settlement rule for AUC. This is automatically included after settling.
    1. Create an Internal Order through KO01 and from that Extras --> Create AUC.
    2. Then you post expenses to AUC.
    3. You settle the IO through KO88. When you settle the internal order automatically it would be settled to AUC which is in IO.
    4. Check the IO you can see the settlement rule with AUC line item
    5. Now select FXA rule and select the final asset.
    This is will solve your problem and this is the procedure.
    Thanks & Regards,
    Giridhar Reddy

  • You can not post to asset xyz ( investment support measure) ??

    Hi Guru's,
    I am trying to post some spending reclassed to an already capitalized asset. So in order to do this I have reactivated the project, resettled the spending to the asset and now I am trying to finalize the settlement to the asset by using tcode: CJIC... but keep getting this a hard error message:
    You can not post to asset xyz ( investment support measure) .....
    Any idea how I can resolve this ?
    Please help !! Thank You
    Best Regards,
    Yasmeen

    hi,
    it would be better if you write error message number in thread.
    hope you are using im module. if so check the system stastus of appr.request and try to settle to auc.
    check and do revert.
    regards,

  • Amortisation adjustsment for Investment Support measures

    I wonder if you can help?
    We have been doing some asset reclassification and changing useful lives etc - we have no problem in adjusting the depreciation up and down using ABAA (unplanned depreciation) and ABZU (write-up i.e. reduce depreciation).
    However, we are struggling with amortisation on investment support measures!
    We can increase the amortision using ABAA no problem.
    BUT we seem unable to reduce it - we have tried lots of combinations under FB05 and although we can adjust the gross value (and therefore the net book value is OK) we need to adjust the cumulated amortisation.
    Has anyone got any ides?
    Thank you in advance.

    Hi,
    In your case you have to create a TTy like in note 67448 descibed  (Lxx (xx for the investment measure) like note 529678 'name convention')  and post the amount with ABIF.          
    Regards Bernhard

  • Investment Support Measure-Settlement of IO to AUC

    HI Gurus,
    I have created investment order and AUC asset through ko04. Also crated budget for this IO in k022. posted invoice through fb60 to this IO. Now i am trying to maintain settlement rule in IO master data. (Settelling to the AUC created for this IO)
    While maintaining settlement rule, system gives following error message:
    You cannot post to asset 900014 0 (investment support measure)
    Message no. AA311
    However if i do settlement through KO88 settlement is done automatically (Test Run).  I want to maintain seetlement rule in Ko04
    Please Advice.
    Regards,
    Shekhar
    Edited by: Shekhar Sonar on Mar 29, 2010 1:10 PM

    Hi,
    Your order is not statistical because you cannot maintain settlement rule for statistical order.
    Even you see all the entries are displayed, can you check the order balance?
    KO03 > Extras > Order Balance
    The message informs you that the settlement is done, and there is no balance.
    If you need to know when the settlement is done, please check the settlement rule > First used & Last used field.
    You can also check the cost analysis as below to see the cost movement for order.
    KO03 > Extras > Cost Analysis

  • Documentation on Investment Support Measures

    Hi All,
    Thanks In Advance
    Please I am in urgent need of Documentation on Investment Support Measures b'coz I have to configure the same in my US Project
    Regards,
    KAMAL KP

    Hello Raghu
    Please read the overview from this SAP link and explore and the other topics.
    http://help.sap.com/saphelp_47x200/helpdata/en/2a/f9f273493111d182b70000e829fbfe/frameset.htm
    Reg
    assign points if useful

  • Investment support measure

    Hello!
    I defined measures for the investment support with the transaction ANVEST, and i put a maximum percentage rate for the investment support.
    When using the transaction ABIF to post an amount for the investment support, the system does not check the amount posted against this percentage.
    Can someone help me?
    Many thanks!
    Kind regards,
    Chiachen

    Is your problem solved? If not, have you defined a base area within your invst support measure? Which area you are posting this against.. area 41 or 51? SAP usually will not allow you to post investment support of more than 100% of the base area... if you post more than 100% of support means that your asset value is negative.
    Let me know if this helps.

  • Configuration of Low value assets

    Dear All,
       I have created a seperate asset class for low value assets. Assigned value based  maximum amount  check in  depriciation area and maximum limit in asset class for low value asstes.
      Stlii, when I am creating asset through AS01  for low value asset class, it s creating assets for greater values also.
      Kindly suggest
    Swati

    Hi Swati,
    By Low value Assets it is meant that if the Value of the Asset at the time of F-90 is equal to or less than the amount specified in configuration, provided the corresponding LVA indicator is set in the asset class.
    If the amount that you are trying to capitalize is more than the amount specified.. system will stop you in F-90. It does not stop you from creating an Asset Master record, because while creating a master record we do not have values of the Asset.
    Regards,
    SAPFICO

  • How to repay Investment Support on the asset? thru which TTY?

    Hello guys,
    Have anyone used TTY J01/J02 to repay investment support? Because SAP does not allow you to configure custom TTYs under tcode AO83 for repayment of invest. supprt. and J01/J02 uses TTy group 52 "Extraord. write-off invest supprt" which gets classified as unplanned depreciation under Area 41 instead of reducing the Investment support posted under same area 41. Is this the correct way of repaying/refunding?
    If not, what TTY to use to refund or repay the support (either partially or fully) and if there is any way to customize TTY specially for repaying/refunding this support.
    Open for any suggestions.
    Thanks,
    Kartik.

    Hi Kartik,
    You have first to Define Investment Support Measures. In the asset in the tab allocation you have to fill in the investment support  area.
    When you save this it will create direct a transaction type that you have to use:
    In our case I have:
    I1     Investment Support Area 81 US GAAP
    I2     Investment Support Area 82 LO GAAP
    Created the transaction types:
    EI1     Investment Support US and LOCAL GAAP
    EI2     Investment Support LOCAL GAAP
    With EI1 I post in I1 and I2 and with EI2 only in I2
    When you want I can sent you some screen shots (see me bussines card how to contact me)

  • Settle an AuC with investment support

    Hello Gurus,
    I have the following problem:
    I have some AuC with investment support measure assigned.
    If I settle the AuC created in prior-years the system settle the costs and the investment support to the final assets but If I try to settle an asset created this year, the system does not settle the investment support to the final asset.
    I need that when the asset under construction is created and settled to a final asset (within the same year), the investment support iis posted to the final asset aswell.
    Thanks alot for your help.
    Christine

    Normally settlement  needs to be performed twice, if the investment support measure is there.
    1) for Investment object to AUC ie WBS / IO to AUC. This called automatic /AUC settlement.
    2) From AUC to Final Asset: This is called final / periodic settlement.
    But both these settlement needs to be executed with KO88/ CJ88.

  • How to post a reduction of Investment support creted by ABIF?

    Hi All,
    in 2010 for an asset Iu2019ve posted an Investment support, by t.code ABIF.
    In 2011 a part of that Investment support has been revoked.
    Could anyone tell me how to post this reduction? Which t.code? Which transaction type?
    My investment support measure is u201CZIu201D. For this measure, SAP has created the tree follows transactions type:
    - IZI
    - JZI
    - KZI
    My SAP release is 6.0
    Thanks for your help.
    G.

    Hi : )
    I know this thread is quite old, but I recently had the same problem and was able to change an automatically created transaction Type eg. I, J and K using transaction AO73_INV.
    This allowed me to copy transaction type K and I was able to conigure my own transaction type for investment support which now allows posting of investment support refund without the retirement of the asset and reduces the amorisation as expected.
    Hope this helps : )
    Tanja

  • Investment support

    Hello,
    I'm having the following problem, I'm trying to create a new transaction type for investment support measure like K61 but with an inverse sign (instead of being a credit transaction it should be debit). Nevertheless I'm not succeeding because I can't find a way to create a new transaction type in support investment...
    Can anyone help me, please?
    Thank's in advance.

    Hi
    When you create  Define Investment Support Measures it create automatecly transaction types.
    You can manual make little changes on it.
    The transaction types that are created like:
    EI1 Capitalized asset Credit
    II1  Capitalized asset Credit
    JI1  Deactivate asset  Debit
    KI1 Credit transaction
    I never found a way to create new one's, i think these are direct linked with the Investment message and that when you found a way to create one you can't use

  • Error in Asset Master Creation for Low Value assets

    Hi,
    I am trying to create an asset under the asset class Low value asset. while saving the asset the system delivers the following Error:
    01 Book depreciation
    E614 Low value asset max.amount exceeded. No posting allowed
    02 Special tax depreciation for APC in fin.statement
    E614 Low value asset max.amount exceeded. No posting allowed
    I am using the standard Depreciation Key "GWG"  But when i change the depreciation key the system allows me to save the asset. Please guide me how to fix this and why system is giving this error.
    Regards,

    I suppose you need to check your configuration of Low Value Assets for each
    depreciation area.
    But before that, please tell me which class of Assets you are using ......Is
    it the *LVA Class 5000 ( individual management )* or* 5001 ( collective
    management)*. Either way, you need to assign a maximum value / maximum value
    over quantity, as the case may be. Unless and until you furnish a value cap,
    the asset class does not permit you to create asset master records.
    Please look into your IMG under the path:
    *IMG -> Financial Accounting -> Asset Accounting -> Valuation ->Amount
    Specifications(Company Code / Depreciation Area) ->
    Specify Maximum Amount for LVA + Asset Classes*
    You would see two activities listed.
    Under *Activity 1*, you need to select and assign value check (*represented
    by number 1*) if you are using *LVA Class 5000* ; alternatively, you need
    to select and assign Check Maximum Amount with Quantity (*represented by
    number 2*) if you are using *LVA class 5001*.
    You need to do this for each depreciation area you wish to apply this value
    cap to and save (using the floppy icon and look out for the confirmatory
    message at the bottom left of your screen).
    Under *Activity 2,* You need to furnish a value cap ( a ceiling in monetary
    units, currency-specifically) for each depreciation area ( a column for
    document value and another for Purchase order value ( possibly to
    accommodate any tax, as applicable). Please make sure that you do it for
    your company code and for each depreciation area wherein you want to control
    using a value cap.
    Save and look for the confirmatory message at the bottom left of the screen.
    Regards,
    Bharti

  • Low Value Asset Configuration

    Dear All,
    I have to Configure Low value assets for my Client.
    Pls tell me the Process for Low value assets configuration.
    I have given the Value of assets in OAYK but Pls tell me that whether I need to Create Separate Assets Class for Low value assets.
    Useful Points will be awarded.
    Thanks,
    Pankaj

    Hi,
    betetr  to  cretae alaways separate asset class for Low Value Assets.
    then follow the configuration steps as mentioned below.
    SPRO-IMG- Financial accounting-asset accounting-valuation---
    amount specification.
    1. OAY2-here you select what are all your low value asset clases.
    2.OAYK.-here you select teh low value assets maximum amount
    3
    chandra

  • What is the Differance Between AUC Assets & Investment Measure Assets?

    HI,
    1. What is the differance between AUC Assets & Investment Measure Assets? How to settle the Investment Measure AUC assets to main asset?
    2. When i create the Internal Order, The system should automatically creates the Settlement rule for the AUC asset. I dont want to create settlement Rule Manually.
    Kindly help me what should i do if the system wants to create the Settlement Rule Automatically? It would be a great help for me if you can provide some inputs..
    Thanks
    Kishore

    Hi,
    Would like to suggest, if you post this query in Asset Accounting Forum under SDN itself, you would get fast response.
    Regards,

Maybe you are looking for