Configuration STMS on solaris

hi all,
i m using oracle db 10.2.4 with ecc 6 on solaris 5.10 system , now want to configure STMS from our DEV to PRD system.
can anyone tell me that how to configure stms . Is it the same process like stms configuratin on Win OS
rgds
imran khan

Hi,
To configure the Transport System SAP recommends to have Global Tranpsport Directory.
1. First decside which system will be Transport Domain Controler: - Generally Development System.
2. Share the /usr/sap/trans directory Transport Domain Controler using NFS.
3. Now Login in 000 client as DDIC user & execute the t-code STMS.
4. It will ask to configure the Transport Domain Controler click on Ok.
5. Set the parameter DIR_TRANS on Transport Domain Client (Production/Quality System) to the path of NFS mounted directory.
6. Login to 000 client as DDIC user on Transport Domain Client (Production/Quality System) & execute STMS.
7. It will ask to include the system in Transport Domain, click on OK.
8. Now login again on Transport Domain Controler in 000 client & Approve Request.
9. In Transport Domain Controler click on Overview--> Transport Routes
10. Click on Configuration> Standard Configuration-> Select Appropriate to your Landscape.
11. Now configure your transport router DEV>QAS>PRD
Thanks,
Shambo

Similar Messages

  • Error while configuring STMS

    Hi
    While configuring TMS ,
    I just entered STMS. in 000 client. it pops up a dialog box with details like DOMAIN_CFG and after that i tried to save same. It has give me error that  The password must contain at least 3 digits (0-9)
    Can any one help in this regard.

    HI Atul,
              When you enter STMS for the first time it will create the DOMAIN_CFG
              domain group and tp config file and all the required rfc's like
              tmsadm@domainname and other.It will not ask any password.
              Can u be clear with ur question exactly what problem ur getting?
              Is this the first time you are trying to configure stms or you want to move
              your domain controller to other system.
    Reward points if helpful.
    Regards,
    vamshi

  • How to configure CUPS in Solaris 10 X86 and SPARC

    Dears,
    I need help in configuring CUPS for Solaris 10 X86 as well as on SPARC.
    What i did?
    Downloaded the CUPS 1.5.0
    read the readme.txt
    read the INSTALL.txt
    Pre-req installation requires :-
    CFLAGS= -i /some/directory \
    CPPFLAGS = -i /some/directory \
    CXXFLAGS = -I /some/directory \
    DSOFLAGS = -L /some/directgry \
    LDFLAGS = -L /some/directory \
    ./configure --
    It errors out with
    checking for gawk ... no
    checking for mawk... no
    checking for nawk ...nawk
    chekcing for gcc ... no
    checking for cc ... no
    checking for cl.exe no
    Configure error: no acceptable C compiler found in $PATH
    see 'config.log' for more details
    I installed all the missing dependencies from www.sunfreeware.com and I have the same problem.
    I also tried to install the software packages from the operating system dvd... like for
    ls -lrt gcc
    gcc "SUNWgcc", "SUNWgccS", "SUNWgccruntime"
    ls -lrt cc
    cc "SUNWgccruntime", "SUNWlccom", "SUNWcctpx", "SUNWccisgn" , "SUNWccinv", "SUNWccfwctrl", " SUNWccfw", "SUNWccccrr", "SUNWccccr", "SUNWccccfg", "SUNWislcc",
    "SUNWaccu", "SUNWaccr", "IPLTccons", " SUWgccs", "SUNWgcc", "SUNWmccom", "SUNWmcc", "SUNWusbccids", "SUNWusbccid"
    ls -lrt gawk
    no results
    ls -lrt mawk
    no results
    ls -lrt cl.exe
    no results
    Is there any way should i follow apart from the above?
    Rgds,
    Mky

    Check pkginfo -l for each package.
    export the PATH variable where the packages are installed, like /usr/local/bin and etc.

  • Configuring networking on Solaris 10

    How do I configure networking on Solaris 10, is there a single command or must I edit each file individually?
    If so, what's the format of /etc/hostname.hme0

    turnstile:
    That advice will only work if the original poster has
    a Sun SPARC system with certain integrated 10/100 Ethernet.
    They didn't tell us what system they actually had.
    The device instance name applies to its associated chipset.
    HME is different from ERI, is different from DMFE, is different from DNET, is different from IPBR, etc, etc, etc.
    etcetra:
    Do the sys-unconfig procedure. If you have a recognized network controller,
    it will prompt you with sufficient questions to configure it,
    particularly if you do not know what actual chipset you might have,
    and want a setup that survives a reboot.

  • Install and configuring SAMBA in Solaris 8.0

    Hi
    Can any one help tme to install and configure SAMBA on solaris 8.0
    Thanks in advance

    We don't provide sudo for Solaris 8, but you can try with the package available there : http://www.sudo.ws/sudo/download.html#binary
    They don't provide a specific package for Solaris 8 but may be will the binary working correctly in your zone.
    An other package, and is builded for Solaris 8, is available on www.sunfreeware.com website.
    Regarding the configuration, the method can differ depending on which version you will use. You can find a lot of examples on Internet if you want for details.

  • Configuring IPSec in Solaris 9

    Hello Friends,
    I want to configure IPSec in solaris 9 so that a win2k/XP machine can communicate with that solaris m/c using IPSec. Could anybody help me regarding this. I have a basic idea of IPSec. I just want a step by step instructions for how to configure it. I have searched through google and found many docs which instructs how to configure IPSec between solaris only and also between windows only and I have succeeded to do so. But failed to configure it within solaris and windows.
    Thanks and Regards
    Dipta P Banerjee

    yes, you can use oracle thin driver.
    Your connection pool configuration is actually using datasource of oracle thin driver.
    1) download oracle thin driver from oracle
    2) .jar need to be kept in AS_INSTALL/domains/<domain-name>/lib/ext
    3) restart AS
    4) set all the necessary properties for Oracle thin driver - conn. pool (refer App Server Administration Guide > JDBC Resources > Config. for specific JDBC Drivers > Oracle thin type 4 driver
    5) Ping conn. pool
    If you are still getting the failure message, please post
    1) exception got during ping, from domains/<domain-name>/logs/server.log
    2) connection pool configuration
    Thanks,
    -Jagadish

  • Configure STMS

    Hello All:
    My system information
    OS:Windows Server 2003
    SAP System:ECC6.0 with ABAP+JAVA
    DB:SQL Server 2005
    When i Configure STMS there is an error message
    "errors occurred during distribution of tp configuration"
    Anyone who can give me some advice?
    Thanks

    Hi,
    You will get detailed information in attached note.
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=62739]
    Hope this helps.
    Manoj

  • CONFIGURE NFS ON SOLARIS ZONES

    I want steps to configure NFS on solaris Zones

    Hi,
    I installed unfs3 in zone, but can't mount unfs3 share from solaris client(Solaris 10 10/08 s10s_u6wos_07b SPARC):
    root@prod-db $ mount -F nfs -o rw 192.168.219.13:/software /mnt
    nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error
    nfs mount: retrying: /mnt
    nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error....
    Any suggestions? I cant find in internet any forum or mailing list about unfs3 :(

  • How to configure stms?

    Hi,
      Can anyone give me the procedure on how to configure stms. Im installing SAP Ecc 6.0.
    Regards

    Read the friendly manual.
    http://help.sap.com/saphelp_nw04s/helpdata/en/44/b4a09a7acc11d1899e0000e829fbbd/content.htm

  • Configure STMS & transports as a single system

    Hello,
    I configured STMS as a single DEV system, without QA and PRD. I have a requirement to import the transports into the DEV system, after copying cofiles and datafiles from another dev system.
    Is it possible to move another system transports into DEV System, configuring it as a single system landscape. If it is possible, kindly provide the steps.
    Thanks,
    Mohi

    Hi
    What you meant by "transport do not move" ?
    Check here for Configuring Single Systems - Software Logistics - SAP Library
    Also as per Matt's  update, the same transport request also can be moved from command prompt  or shell (on any OS);
    log into sidadm
    from Command prompt,
    1) add request into buffer (this step may not be required if added earlier - as per Matt's update)
    tp addtobuffer <transport number> <SID>  pf=/usr/sap/trans/bin/<transport profile, i.e. TP_DOMAIN_<SINGLE SYSTEM SID>.PFL
    2) then use below tp command to import the specific requests;
    tp import <transport number> <SID> CLIENT=<client number> pf=/usr/sap/trans/bin/<transport profile, i.e. TP_DOMAIN_<SINGLE SYSTEM SID>.PFL
    regards
    Swami

  • Unable to configure STMS

    Hi,
    I am trying to configure STMS between my development (DEC) and Quality (QEC) server. DEC is my domain controller. I try to configure QEC in DOMAIN_DEC. But i get the error:
    18.02.09   16:13:21   TMSADM         TMS_PS_WRITE_PROFILE_TO_DISK                WRITE_PROFILE_FAILED                        QEC      000
    Please suggest.
    Regards,
    Sridevi

    Hi,
    Refer the following notes:
    117395 - Authorization problems for file I/O on Windows NT
    639045 - Using network disk drives
    Firstly the trans directory must be accessible.
    Regards,
    Vamshi.

  • Steps to Configure Sendmail in Solaris 9

    Can anyone provide me the SUN documents URL to configure sendmail in Solaris 9.
    Any other good link will also do.
    Thanks.

    I have some questions:
    The server in which I want to configure is running as a DNS client. and I want to configure a local mail so I think that i need to configure mail rather than configuring sendmail.
    I get a document for configuring mail in solaris from docs.sun.com. The doc name is "Mail Administration Guide for Solaris 7".
    This document has the steps to configure mail but my question is:
    The server is already running as DNS client, in this case Do I have to install a new naming service to configure it as mail server?
    Can we configure a server as NIS server when it is already a DNS client?
    Suppose there is only one server, how do you configure mail server and client server and host server..can all three be done on only one server. Here there is one server and a few PCs need to be connected to it as clients.
    Any suggestions?
    David

  • Configure STMS before applying SP?

    Hello All,
                  Why we need to Configure STMS before applying Support Packs??What is the relation of STMS with Support Packs application??

    Hi all,
    STMS is mandatory before applying support packages. If you have not configured STMS you are not allowed to import support packages.
    I hope you have  noticed while applying  support packages there are many phases like test import,DDIC activation,main port and so on.
    Only by transport request the support packages are applied in SAP. You can verify the same in Support packages log. Even if you want to check the same at OS level you can get more details in trans log. It means SP can be applied only using transport request.
    I will list out the actions while applying SP.
    2. Create cofile from datafile
    3. CMD Import
    4. Process Object list (All components listed)
    5. tp user check ok
    6. Add-on (All components listed)
    7. SPDD_SPAU_CHECK
    8. Compling SAP
    9. tp user check ok
    10. DD Import
    11. DD Activation
    12. Distribution of DD-Objects
    13. TBATG Convention of DD-Objects
    14. MOVE NAME TABS
    15. MAIN IMPORT
    16. Execution of Reports After Put.
    So If you configure STMS only it will create co and data file.
    I hope you would have clear understanding
    Regards
    Vijay

  • Configure Mozilla in Solaris 10

    I new in Solaris , the browser Mozilla does not recognize URL for example when I put www.google.pt
    browser tell me that (does not find the url). I logon in internet becouse the ping command is sucesseful , and I can enter in my router with (private address 192.168.1.1) and broser I have the turn on Icon correctly. Please tem me what is thr problem?

    I don't think you have configured DNS client on the system which made the mozilla could not resovle the URL.

  • Configure Network in Solaris Sparc 10

    Hi
    I installed Soalris 10 but Installation time i didn't select any service like DNS, NIS or LDAP
    Now I want to start Internet in MY Solaris workstation
    ethernet is hme0
    Now in which file I have to enter ipaddress of ethernet card ,
    Where I configure gateway , and DNS also
    pl. guide me
    Regards
    Satish

    You have same post in another forum. I answered this question in the other post. Please refere it there:
    http://forum.java.sun.com/thread.jspa?threadID=5265020&tstart=0

Maybe you are looking for