Configuration Support, Will Pay

I am trying to set up a SOHO office web server. The server is directly connected to my CISCO 877M router. I am trying to use CISCO Configuration Professional 2.5 or CISCO Configuration Assistant to configure the router but have run into problems and the limit of my knowledge.
Currently when typing in the intended domain name of my server, the router is asking for login credentials to enter the router itself rather than forward the traffic to the web server...  Can anyone please suggest one of the following:
* Is there a good step by step guide for performing advanced configuration of the CISCO router using CISCO Configuration Professional suitable for novice users?
* Can someone recommend a good contractor / agency who could provide a decent fixed price to complete the configuration for me? It should only be an hours work for someone who knows what they're doing.  I have all the necessary information (for obvious reasons won't post here).
* If someone from CISCO is reading this post, could you please email me directly with a price to complete the configuration?
Background:
I bought the router from my ISP who have since shown absolutely no interest in helping me with software upgrades or configuration.  Also, I cannot obtain free support from CISCO because the device was not purchased direct from them.  IMHO this highlights a major issue with CISCO's current small business model for small business owners.  I have been extremely frustrated trying to get this router to do a very basic network topology.  I am not expert enough to do the configuration myself and am prepared to pay to have the job finished once and for all.  I am so frustrated with my ISP who sold me the router I am prepared to name and shame them to CISCO.

I don't see why not. I would be curious if the iPhone 6 will be Isis capable, too.

Similar Messages

  • I need to enable my password to make purchases from I tunes. It was disabled because I entered it incorrectly too many times.I reset it but that didn't help. The message is "your apple ID has been disabled". Customer support will only help if I pay $29.00

    I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pay $29.00. Help!

    Hi David , Contact your bank they may have disabled your credit/ debit card because of an unusual amount of small purchaches of APPS , ALBUMS etc....... Has your name been changed if so create a new Apple ID and RELAX. BANKS TREAT THIS AS FRAUD they may need you to confirm you purchased them APPS.
    davidfrommohrsville wrote:
    I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pay $29.00. Help!
    Jack
    <Edited by Host>

  • Will Verizon support Apple Pay NFC on iPhone 6?

    Will Verizon support Apple Pay NFC on iPhone 6?

    I don't see why not. I would be curious if the iPhone 6 will be Isis capable, too.

  • Ibought an ibook by mistake. I wanted an audiobook. I only have an ipad so cannot read large book on it. Can I transfer it to a Kobo Vox? If not, how do I go about switching the ibook for an audiobook. I will pay the difference, no problem.

    I bought an Ibook by mistake when I thought I was buying an audiobook. I only have an Ipod - can't read a big book like that on an Ipod. Is it possible to transfer it to a Kobo Vox? If not, how do I get hold of Itunes to exchange them (I will pay the difference)?

    " Is it possible to transfer it to a Kobo Vox? "
    No.
    " how do I get hold of Itunes to exchange them (I will pay the difference)?"
    There are no refunds/exchanges.  You can try contacting itunes support and asking for an exception:  Click Support at the top of the page, then click the link under Contact Us.

  • Must NI-DAQmx Configuration Support be included in Application Installer?

    Hello.
    I am using LabVIEW 2012 sp1 with Application Builder and am building an application installer.  I have included the LabVIEW run time engine, DAQmx run time engine, and device driver for the USB-6009 that I am using.  If I'm including the device driver and am only using this one device (i.e., not changing devices programatically), do I still need to include NI-DAQmx Configuration Support under the "Additional Installers" page of the Installer Properties Dialog Box?  The description says that this "Contains NI-DAQmx drivers and support for configuring NI hardware via the Measurement & Automation Explorer (MAX)", so I'm thinking I don't need it on the target machines on which my application will be installed if I alread have the hardware identified and driver installed.  
    I'm trying to scale back the file size of the resulting application installer. 
    Thanks,
    Paul

    As long as your device will be the default device name (Dev1) in every instance the software will use, you should be fine.  If you use a specific configuration other than the default that you set up in MAX, you will want to add MAX to the installer as well as the MAX configuration for that device.
    www.movimed.com - Custom Imaging Solutions

  • GRRRRRR I dont want a discussion I JUST WANT TECH SUPPORT - WILL SOMEBODY FROM ADOBE SORT THIS!!!

    GRRRRRR I dont want a discussion I JUST WANT TECH SUPPORT - WILL SOMEBODY FROM ADOBE SORT THIS!!!

    Just what I say Jeri.  I was persuaded to take up a montly sub for CS a year ago.  I pay every month but have never used any upgrade even once. We couldnt install it and despite spending hours trying to get support u just cant get anything - We are totally fed up with the whole time wasting excercise.
    Cant we simply get a set of discs for the current upgrade and go back to working sensibly.
    We could go bust here just mucking about with this stupid cloud thing - It could become a lifes work just trying to sort the ****** thing out. 
    To add insult to injury I now see that the D Debit is GBP46.88 /mnth for absolutely NOTHING.  Its a joke in bad taste.
    At one time it was Adobe that had the best cus service around and Quark that were the crooks.  Amazing how things turn around dont u think!!!

  • I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?

    I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?

    You are unable to register what ? If you are in China then you can only use the China iTunes store (you have to be in a country to use its store), if you want to contact China iTunes Support then you can do so via this page : http://www.apple.com/cn/support/itunes/contact/

  • How to add NI-VISA Configuration Support to list of additional installers

    I recently changed computers and now I am trying to use an installer that I made with the old computer, but one of the additional installers I had selected was the NI-VISA Configuration Support.  How do get that installed to my new computer so it will available in the list of additional installers?

    if it's not in your 'old' installer then you did not include it in the build.
    You will have to download the correct version from NI ... this is the link for the 5.4 
    http://www.ni.com/download/ni-visa-run-time-engine-5.4/4231/en/
    There is a good chance if you install the latest NI VISA your program will run again!

  • I will pay, who creates a method for importing tables from MS word

    I need a script or any other type of method, which will import the MSword document, which have tables and footnotes.
    WIth "Place" option (with "SHift"), it only imports the first page of word document, and even that first page is degraded and some part of  footnotes are moved to the second page of Indesign.
    for example,see such document: http://d2.minus.com/1342790256/zDuntjI5q2iNIJqkk5UPJA/dbjwjsXzUbRmjD/sample.rtf
    i will pay him, who will do that job (offer me your bid).
    my info:
    mail: selnomeria(*)yahoo.com
    skype: oceane.sa

    Hello!
    First of all:
    Indesign does not support footnotes in tables. There are some tricks i use, for example making a "hidden footnote reference" somwhere in the page (just assign a 0.1pt size and fillcolor of "None") but it's just a ugly hack and if you have to reformat the tables you will have to rebuild all teh footnotes. move them around etc.
    Second:
    If one of the cells in the table you are importing is larger (verticaly) than the page size the autoflow will stop. The table is imported in the story (check it out in the story editor) but indesign cannot display it. Enlage the frame until the cell fits (or make the cell smaller -decrease the text size?) and reflow the rest of the text.
    Third:
    If you are working with large tables and especialy large cells be prepared to have numerous crashes. And i mean NUMEROUS!! Every time you try to change something in the table.
    i am sorry to be the bearer of bad news but at the moment table and footnote support in indesign is crappy at best, and i don't think there's anyone besides the guys form Adobe that can do anything to help you.

  • How can i get a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

    I wish to request that a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

    You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
    But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there

  • Problem with configuration supporting point in MD62

    Hi,
    well I have detected a problem with my planned independent requirements for some materials.
    The materials that are concerned are semifinished product which have an active BOM.
    Example :
    material A composed with material B and C.
    On the material A I have the strategy group 54. For these materials I have "VSE" PIR.
    The problem is that for many materials, the VSE needs can not be seen by components.
    Example, on material A, I have a VSE need on 15.02.2010, MRP generates a planned order on 15.02.2010 on material A. No problem but I have in MD04 an alert 52 for these PO.
    I go to material B or C in MD04 and I don't see any needs ! The planned order needs have not been splitted to the components.
    I have seen that if I go to MD62 for material A and if I click on "Configuration supporting point", everything is OK after next MRP Run but the problem seems to go back after few days.
    The strange thing is that it works perfectly for some materials and it doesn't work for others materials although there is no differences between data of these materials !
    Finally, I have to say that program RM60RR20 is turning every night and I have seen that there are some calls to function DELETE_SUPPOINT. Maybe this program is deleting the supporting point but it should recreate the supporting point after...
    Is there anybody which know how this program is working or why sometimes my supporting point is deleted without being recreate ?
    Thanks.

    Hi Frederico,
    Have you tried typing the query in query manager and are you sure you've selected the correct column? You can check the column name if you switch system information on and verifying the values in the database for that column.
    Hope it helps,
    Adele

  • I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?

    I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?

    No, you can't do what you want. Apple will only ship a US iPhone to a verified billing/shipping address in the US.

  • Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

    Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

    If you are past the return date, you can sell the older iPad and put the money towards a new one.
    Plus, old iPads make great gifts ! ! !

  • I will pay you if you can help me with..

    Logic studio. I have tons of questions about everything and I dislike reading. If you would be so kind to 'teach' me the programs inside logic studio I will pay you $5 an hour. Reach me at: [email protected] or my aol instant messenger screen name: wut a lewser
    please and thank you.

    Let's do some math.
    20 sessions at $5 a piece is $100. The same cost for 52 sessions.
    Also, I think you might be hard pressed to get some one to teach you Logic for $5 an hour. Not to sound arrogant but for $5 I might answer 1 question for that. Not to say you can't find someone, just remember you get what you pay for.
    See what works for you or how you can learn the application. There are some great tutorial books from peachpit press that you could look into.

  • "Apple Mobile Device Support" will NOT uninstall from my computer, so I am still unable to upload iTunes

    "Apple Mobile Device Support" will NOT uninstall from my computer so I am still unable to upload iTunes.  I have tried it multiple times in multiple ways and after the uninstall always fails.  Solutions to this specific problem?

    I don't know... A link to the official repair advice is given at the top of my user tip. There was a new build of the iTunes 11.1.4.62 setup file released yesterday which is supposed to install cleanly on any system still back on iTunes 11.1.3.8, however they are still giving the same advice for problem systems that have already been upgraded. I.e. the new installer won't repair a currently borked install.
    You can download 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components, then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AMDS might not install right now, but you may get a more useful error message as to why not, and you might be able to run iTunes even if you can't update your devices at this stage.
    tt2

Maybe you are looking for

  • How do I save a photo and then find it again?

    Hi, I have 70 photos in my library. All I want to do is save one photo to put on ebay. I have tried everything to save it and then try to find it later, but I can't figure it out. You know how easy it is to just save a word document and then hit brow

  • N81 BUG: date jumps to nearest event entry(date) i...

    Hello folks, I have the following issue: After firmware update to 21.0.010 I found a weired bug: In may case I have a Calendar entry for 18 September of type "Anniversary" with alarm turned on for the same day (time 13:00) and I have noticed in the l

  • Getting dump SAPSQL_STMNT_TOO_LARGE.

    Hello all,     In my report i am calling one FM. in that i nee to pass tcode, date, bname(these all three are range tables). all these 3 range tables formate has, like                sigh = 'I',                option =  EQ,                low  =  val

  • Connect to Database through FORM builder

    I have configured 2 listeners to my database, both connect to the database ok but when I try to connect through my form builder I keep getting the error message "cannot resolve service_name" even though it's already connected through my net configura

  • Multiple Reports In A Single Region

    Hi, I've created a page with 4 regions with items in it that are grouped logically. I need to create a 5th region which should have multiple SQL reports in it. How can I acheive that ? | ---------------------------------------------------------------