Must NI-DAQmx Configuration Support be included in Application Installer?

Hello.
I am using LabVIEW 2012 sp1 with Application Builder and am building an application installer. I have included the LabVIEW run time engine, DAQmx run time engine, and device driver for the USB-6009 that I am using. If I'm including the device driver and am only using this one device (i.e., not changing devices programatically), do I still need to include NI-DAQmx Configuration Support under the "Additional Installers" page of the Installer Properties Dialog Box? The description says that this "Contains NI-DAQmx drivers and support for configuring NI hardware via the Measurement & Automation Explorer (MAX)", so I'm thinking I don't need it on the target machines on which my application will be installed if I alread have the hardware identified and driver installed.
I'm trying to scale back the file size of the resulting application installer.
Thanks,
Paul

As long as your device will be the default device name (Dev1) in every instance the software will use, you should be fine. If you use a specific configuration other than the default that you set up in MAX, you will want to add MAX to the installer as well as the MAX configuration for that device.
www.movimed.com - Custom Imaging Solutions

Similar Messages

How to add NI-VISA Configuration Support to list of additional installers

I recently changed computers and now I am trying to use an installer that I made with the old computer, but one of the additional installers I had selected was the NI-VISA Configuration Support. How do get that installed to my new computer so it will available in the list of additional installers?

if it's not in your 'old' installer then you did not include it in the build.
You will have to download the correct version from NI ... this is the link for the 5.4
http://www.ni.com/download/ni-visa-run-time-engine-5.4/4231/en/
There is a good chance if you install the latest NI VISA your program will run again!

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

Problem with configuration supporting point in MD62

Hi,
well I have detected a problem with my planned independent requirements for some materials.
The materials that are concerned are semifinished product which have an active BOM.
Example :
material A composed with material B and C.
On the material A I have the strategy group 54. For these materials I have "VSE" PIR.
The problem is that for many materials, the VSE needs can not be seen by components.
Example, on material A, I have a VSE need on 15.02.2010, MRP generates a planned order on 15.02.2010 on material A. No problem but I have in MD04 an alert 52 for these PO.
I go to material B or C in MD04 and I don't see any needs ! The planned order needs have not been splitted to the components.
I have seen that if I go to MD62 for material A and if I click on "Configuration supporting point", everything is OK after next MRP Run but the problem seems to go back after few days.
The strange thing is that it works perfectly for some materials and it doesn't work for others materials although there is no differences between data of these materials !
Finally, I have to say that program RM60RR20 is turning every night and I have seen that there are some calls to function DELETE_SUPPOINT. Maybe this program is deleting the supporting point but it should recreate the supporting point after...
Is there anybody which know how this program is working or why sometimes my supporting point is deleted without being recreate ?
Thanks.

Hi Frederico,
Have you tried typing the query in query manager and are you sure you've selected the correct column? You can check the column name if you switch system information on and verifying the values in the database for that column.
Hope it helps,
Adele

I write digital port by 'DAQmx Configure Logging.vi' and receive TDMS file with 8 boolean channels. How can I write to 1 integer channel?

Hello!
I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
How can I write to 1integer channel?
Attachments:
1.JPG ‏27 KB

Hey Atrina,
The actual data stored on disk is just the raw data (that is, a byte per sample in your case). It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
Read back the TDMS file as a digital waveform. Then there's a conversion function in LabVIEW called DWDT Digital to Binary. This function will convert that set of digital channels into the "port format" that you're wanting. I've attached an example of what I mean.
Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files. It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
Message Edited by AndrewMc on 01-27-2010 11:21 AM
Thanks,
Andy McRorie
NI R&D
Attachments:
digitalconvert.vi ‏13 KB

Column value ' ' too long - must stop', probably configuration error

Hi Experts,
I have a Proxy to File Scenario when I execute it I get this error in RWB. Can you please help me on this:
Message processing failed. Cause: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long - must stop', probably configuration error in file adapter (XML parser error)''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long - must stop', probably configuration error in file adapter (XML parser error)'
Thanks
Srikanth E

Hi,
if there is any empty tag coming from source then target structure tag will not be created and because of which ur payload structure and FCC configuration is not matching.
To use map with default between source and target strcture so in case source tag dont have value target structure will be created because of mapwithdegfault fuction and ur FCC will not fail.
Open SXMB_MONI output payload and compare the structre with Data type u will se for no source value target tag is not created at all and FCC is failed.
please refer below thread,
0 byte txt file using receiver File Adapter
regards,
ganesh.

Daqmx Configure Logging with Time Stamp

Hi All,
I was wondering if it is possible to use Daqmx Configure Logging to log both data, and a row of the exact time (not a relative one), or at least add the FIRST time and date to the information?
Thanks,
Lester

Hi,
I got it to work, I just forgot to put in the "Group Name" and "Channel Name" which is necessary to get the properties, I wasn't aware of that. The info can be seen at http://zone.ni.com/devzone/cda/tut/p/id/3539 .
I got the time stamp now, but the resolution is only to seconds. I tried using the "Format Date/Time String" vi to format the resolution to milliseconds, but that doesn't seem to work because all the decimals after the seconds is just ".000000". Does TDMS always start at .000 seconds, or does it just not go down to that resolution of timing?
Thanks for your help,
Lester

DAQmx configure logging (TDMS) and counter

Hi,
I'm trying to stream analog data jointly with counter data to one TDMS file with use of DAQmx configure logging vi. This is quite new but powerful function but I can't manage with it successfully. I'm able to acquire analog data only and display no. of counts simultaneously (attached diagram). I have no idea how attach counter data to TDMS stream as separate channel group.
It is important for me to stream data with this VI bacause I'm sampling analog data with 95kHz per channel (PCI-6143 board).
Could you post any ideas how to resolve this problem?
Best regards
Mark
Attachments:
acq_analog_and_contr.PNG ‏44 KB

Eric, hear is short info about DAQmx configure logging http://zone.ni.com/devzone/cda/tut/p/id/9574.
Yes I thought about producer/consumer structure, It is first alternative way.
There is also another very simple way - connecting encoder to analog input and acquire together with analog signals. Of course It will be neccasary to process sigal from encoder after recording. I'm also concerning such solution
Ok I have to sleep with this problem
Best regards
Mark

下载了DAQmx9.0,为什么找不到" vilib :\DAQmx\configure\task.llb\DAQmx Control Task.vi"等一些VI

下载了DAQmx9.0，但是在打开如SVL Calibrate Sensor VI时，为什么找不到"<vilib>:\DAQmx\configure\task.llb\DAQmx Control Task.vi"等一些VI

我的找不到DAQmx Configure Logging 这个VI

Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock

[svn:bz-trunk] 20725: Update the ClientConfigurationParser to match the ServerConfigurationParser changes that support destination-include directory-path attribute .

Revision: 20725
Revision: 20725
Author:   [email protected]
Date:     2011-03-09 10:56:05 -0800 (Wed, 09 Mar 2011)
Log Message:
Update the ClientConfigurationParser to match the ServerConfigurationParser changes that support destination-include directory-path attribute.
Remove the unchecked assignment in ServerConfigurationParser and just cast elements of the list.
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfigurationParser.java
    blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

"...installer has been mis-configured" issues - LOG INCLUDED

Hi all,
I have an Acer Aspire laptop running Windows 7 Home Premium 64 bit.
I am trying to udate Picaboo X and everytime I open the application I get this error message:
"Sorry an error has occured.
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
Here is my installation log from Adobe AIR:
[2013-11-21:11:33:35] Runtime Installer begin with version 3.9.0.1210 on Windows 7 x86
[2013-11-21:11:33:35] Commandline is:
[2013-11-21:11:33:35] No installed runtime detected
[2013-11-21:11:33:40] Relaunching with elevation
[2013-11-21:11:33:40] Launching subprocess with commandline c:\users\michael\appdata\local\temp\aire10d.tmp\adobe air installer.exe -ei
[2013-11-21:11:33:44] Runtime Installer begin with version 3.9.0.1210 on Windows 7 x86
[2013-11-21:11:33:44] Commandline is: -stdio \\.\pipe\AIR_6088_0 -ei
[2013-11-21:11:33:44] No installed runtime detected
[2013-11-21:11:33:44] Starting silent runtime install. Installing runtime version 3.9.0.1210
[2013-11-21:11:33:45] Installing msi at c:\users\michael\appdata\local\temp\aire10d.tmp\setup.msi with guid {52E225FC-FCB4-41F7-837B-6E37FB05BD7B}
[2013-11-21:11:33:49] Runtime Installer end with exit code 0
[2013-11-21:11:33:49] Elevated install completed
[2013-11-21:11:33:52] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2013-11-21:11:33:52] Runtime Installer end with exit code 0
[2013-11-21:11:33:53] Runtime Installer begin with version 3.9.0.1210 on Windows 7 x86
[2013-11-21:11:33:53] Commandline is: -installupdatecheck
[2013-11-21:11:33:53] Installed runtime (3.9.0.1210) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2013-11-21:11:33:55] Performing pingback request
[2013-11-21:11:33:55] Starting runtime background update check
[2013-11-21:11:33:55] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.9.0.1210/update
[2013-11-21:11:33:55] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.9.0.1210/update to C:\Users\Michael\AppData\Roaming\Adobe\AIR\Updater\Background
[2013-11-21:11:33:55] Runtime update not available
[2013-11-21:11:33:55] Unpackaging cancelled
[2013-11-21:11:33:55] Runtime Installer end with exit code 0
[2013-11-21:11:34:22] Application Installer begin with version 3.9.0.1210 on Windows 7 x86
[2013-11-21:11:34:22] Commandline is: -update "c:\program files (x86)\picaboo x\picaboo x.exe" "C:\Users\Michael\AppData\Roaming\com.picaboo.Picaboo.A382D4714709B456C4E0088DFC1F7243AF9 EBF75.1\Local Store\#ApplicationUpdater\update.air" 11.0P
[2013-11-21:11:34:22] Installed runtime (3.9.0.1210) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2013-11-21:11:34:23] Installed app (com.picaboo.Picaboo.A382D4714709B456C4E0088DFC1F7243AF9EBF75.1) located at c:\program files (x86)\picaboo x\picaboo x.exe
[2013-11-21:11:34:24] Unpackaging file:///C:/Users/Michael/AppData/Roaming/com.picaboo.Picaboo.A382D4714709B456C4E0088DFC1F 7243AF9EBF75.1/Local%20Store/%23ApplicationUpdater/update.air to C:\Users\Michael\AppData\Local\Temp\flaC025.tmp
[2013-11-21:11:34:25] Application signature verified
[2013-11-21:11:34:25] Unpackaging/validation complete
[2013-11-21:11:34:25] The certificate of the installed app fails to match either the signature or migration signature of the AIR file
[2013-11-21:11:34:41] Launching subprocess with commandline c:\program files (x86)\picaboo x\picaboo x.exe
[2013-11-21:11:34:41] Application Installer end with exit code 9
I wasn't sure if it was AIR messing up or Picaboo X messing up. Any help would be much appreciated.

Turns out it was the Picaboo. I uninstalled and reinstalled and things are working properly.

When creating an application installer in LV, what run-time engine or driver must be installed to install the VISA interactive control?

I've created an application installer using LabVIEW's application builder and use it to install NI MAX. However, after running the installer, the VISA interactive control is disabled in NI MAX.
The installer installs the following NI components: NI LabVIEW Run-Time 2014 SP-1(64-bit), NI LabWindows/CVI Shared Run-Time Engine 2013 SP2, NI Measurement & Automation Explorer 14.5, NI-488.2 Application Development Support (includes run-time), NI-VISA Configuration Support 14.0.1, NI-VISA Runtime 14.0.1, NI-VISA Server 14.0, NI Systems Configuration Runtime 14.5.0, vision run-time, dc-power run-time.
If I download and run the 488.2 installer, the VISA interactive control is enabled in NI MAX. But, the installer created with the application builder does not seem to install the necessary components.
What needs to be added to the installer to enable the VISA interactive control (VISAIC)?
Thanks.
Solved!
Go to Solution.

From Pedro Munoz, Applications Engineer, National Instruments
Sorry for the confusion with the forum post that Jon sent you. I did some research on our internal database and I found out the component will not be installed by any of the components added from the additional installers section on the configuration of the installer. As you have already found out you need to install the full installer in order to enable this feature.
I know that this might be an inconvenient for you because you wanted to have one installer to run. On this case may I suggest using the NI Batch Installer Builder.
The NI Batch Installer Builder allows building installers that contain National Instruments software from several products. That way you can create an installer for you application in LabVIEW (and not include the drivers in the additional installer section), then use NI Batch Installer Builder to include the installer for your application and the full version of the drivers that you mentioned.
Here is the download link:
http://www.ni.com/download/ni-batch-installer-builder-14.5/5193/en/
And in here you can find instructions on how to get started with it:
http://zone.ni.com/reference/en-XX/help/374206A-01/
Let me know if you have any question.
Regards
Pedro Munoz
Applications Engineer
National Instruments
http://www.ni.com/support

Ask the Expert: Configuration and Troubleshooting the Cisco Application Control Engine (ACE) load balancer

With Ajay Kumar and Telmo Pereira
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about configuration and troubleshooting the Cisco Application Control Engine (ACE) load balancer with Cisco expert Ajay Kumar and Telmo Pereira. The Cisco ACE Application Control Engine Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is a next-generation load-balancing and application-delivery solution. A member of the Cisco family of Data Center 3.0 solutions, the module: Helps ensure business continuity by increasing application availability Improves business productivity by accelerating application and server performance Reduces data center power, space, and cooling needs through a virtualized architecture Helps lower operational costs associated with application provisioning and scaling
Ajay Kumar is a customer support engineer in the Cisco Technical Assistance Center in Brussels, covering content delivery network technologies including Cisco Application Control Engine, Cisco Wide Area Application Services, Cisco Content Switching Module, Cisco Content Services Switches, and others. He has been with Cisco for more than four years, working with major customers to help resolve their issues related to content products. He holds DCASI and VCP certifications.
Telmo Pereira is a customer support engineer in the Cisco Technical Assistance Center in Brussels, where he covers all Cisco content delivery network technologies including Cisco Application Control Engine (ACE), Cisco Wide Area Application Services (WAAS), and Digital Media Suite. He has worked with multiple customers around the globe, helping them solve interesting and often highly complex issues. Pereira has worked in the networking field for more than 7 years. He holds a computer science degree as well as multiple certifications including CCNP, DCASI, DCUCI, and VCP
Remember to use the rating system to let Ajay know if you have received an adequate response.
Ajay and Telmo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum Application Networking shortly after the event.
This event lasts through July 26, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hello Krzysztof,
Another set of good/interesting questions posted. Thanks!
I will try to clarify your doubts.
In the output below both resources (proxy-connections and ssl-connections rate) are configured with a min percentage of resources (column Min), while 'Max' is set to equal to the min.
ACE/Context# show resource usage
                                                     Allocation
        Resource         Current       Peak        Min        Max       Denied
-- outputs omitted for brevity --
proxy-connections             0      16358      16358      16358      17872
ssl-connections rate          0        626        626        626      23204
Most columns are self explanatory, 'Current' is current usage, 'Peak' is the maximum value reached, and the most important counter to monitor 'Denied' represents the amount of packets denied/dropped due to exceeding the configured limits.
On the resources themselves, Proxy-connections is simply the amount of proxied connections, in other words all connections handled at layer 7 (SSL connections are proxied, as are any connections with layer 7 load balance policies, or inspection).
So in this particular case for the proxy-connections we see that Peak is equal to the Max allocated, and as we have denies we can conclude that you have surpassed the limits for this resource. We see there were 17872 connections dropped due to that.
ssl-connections rate should be read in the same manner, however all values for this resource are in bytes/s, except for Denied counter, that is simply the amount of packets that were dropped due to exceeding this resource.
For your particular tests you have allocated a min percentage and set max equal to min, this way you make sure that this context will not use any other additional resources.
If you had set the max to unlimited during resource allocation, ACE would be allowed to use additional resources on top of those guaranteed, if those resources were available.
This might sound a great idea, but resource planning on ACE should be done carefully to avoid any sort of oversubscription, specially if you have business critical contexts.
We have a good reference for ACE resource planning that contains also description of all resources (this will help to understand the output better):
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/virtualization/guide/config.html#wp1008224
1) When a resource is utilized to its maximum limit, the ACE denies additional requests made by any context for that resource. In other words, the action is to Drop. ACE should in theory silently drop (No RST is sent back to the client). So unless we changed something on the code, this is what you should see.
To give more context, seeing resets with SSL connections is not necessarily synonym of drops. As it is usual to see them during normal transactions.
For instance Microsoft servers are usually ungracefully terminating SSL connections with RESET. Also when there is renegotiation during an SSL transaction you may see RESETS, but this will pass unnoticed for end users.
2) ACE will simply drop/ignore new connections when we reach the maximum amount of proxied connections for that context. Exisiting connections will continue there.
As ACE doesn't respond back, client would simply retransmit, and if he is lucky maybe in the next attempt he will be able to establish the connection.
To overcome the denies, you will definitely have to increase the resource allocation. This of course, assuming you are not reaching any physical limit of the box.
As mentioned setting max as unlimited might work for you, assuming there are a lot of unused resources on the box.
3) If a new connection comes in with a sticky value, that matches the sticky entry of a real server, which is already in MAXCONNS state, then both the ACE module/appliance should reject the connection and that sticky entry would be removed.
The client would at that point reestablish a new connection and ACE would associate a new sticky entry with the flow for a new RSERVER after the loadbalancing decision.
I hope this makes things clearer! Uff...
Regards,
Telmo

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.

Hi,
In addition, please make sure that the port 443 is not blocked by the firewall.
Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
placed in front of the Web Application Proxy server.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Must NI-DAQmx Configuration Support be included in Application Installer?

Similar Messages

Maybe you are looking for