Configure 1 tape for 1 day instead of two NB6.5

Hi,
I'm using veritas netbackup 6.5 LTO3..
Previously I have 1 tape running per day(daily backup).. but suddenly it change to two tapes per day..
the question is:
1. how can I configure for the backup just to have one tape instead of two?
2. is there a way that I can configure the tape to be running in sequential order? lets say I have a barcode AAA111, AAA112, AAA113, AAA114
sometimes the backup will be running at AAA113 and AAA114 instead of AAA111 or 112.. how can I configure that it should be running in sequential order instead of random.
Thanks.
Edited by: flekzout on Jan 8, 2009 8:08 AM

Thanks for the detailed procedure, it helped a lot!

Similar Messages

  • HT3916 When I order a movie from Apple TV for $4.99 I get charged $14.99 and it stays for 30 days instead of 24  hours - how do I change that setting?

    Hi - I just got my new Apple TV setup - when I order a movie for $4.99 - I get charged  $14.99, and instead of only staying for 24 hours, it now stays for 30 days - how do I change the setting so i'm only getting an overnight movie rental instead of buying it for 30 days? 

    Welcome to the Apple Community.
    It sounds as though you have purchased it to me, does it actually say anything about 30 days.
    Rentals will stay available for 30 days, but if you start watching them the 24/48 hour timer starts counting down. This is the standard rental model, there is no alternative.

  • Flex 2 14 - Two finger tap for Right-Click not working (Two finger double tap works)

    I bought my Flex 2 14 a couple of weeks back.
    I want to enable Two-finger tap (not click) for right click.. Unfortunately it does not work.
    Weirdly, Two-finger DOUBLE tap works for right click.. 
    How do I get a two-finger tap? 
    I tried the regitry hacks from here (https://forums.lenovo.com/t5/Yoga-Flex-Laptops-and/Yoga-2-Pro-Two-finger-tap-does-not-work/td-p/1406... but no luck yet. 
    Any help please. 

    I have found a solution but I am still annoyed I had to do my own tech work to get a common touch figure enabled. (By the way there's many threads out there on Synpatics drivers and touchpads not working right for many people on different machines.)
    Anyway, indeed the fastest fix is to modify a registry entry for Synaptics. Just open  the regisitry edit software on the Yoga and then go through the folders: HKEY LOCAL / Software / Synaptics / SynTP / Win8
    In "2FingerTapAction" all you need is to change the value from "0" to "2" - and presto two-finger tap is now a right click!
    Much easier than going through a driver install / uninstall routine or any other of the suggestions I've found out there.
    I wish Lenovo had this set up as a default. It's really a great gesture and it's quiet and fast.

  • Per Diem Calculations for Single Day and Multiple Days

    Hi Gurus
    I have just now confronted a weird calculation of Per Diems.
    I have configured Per Diems for 1 Day say $50 per Day, irrespective of the no.of hours.
    When I create a trip for a single day, the system is calculating $50 Per DIem for one day.
    Whereas, when I create a trip for 3 days, the system is calculating only for Two days i.e, $50x2=$100 and not $150 as expected, meaning the lfirst and seond day gets calculated and the last day is not getting calculated
    Please let me know where I am missing the little configuration in order to let the system calculate for multiple days correctly ?
    This is an urgent requirement please.....Need help.
    Thank you
    RRoy

    Hi,
    As I told you earlier that there could be serval options which needs to be checked again.
    For example:
    a)  V_T702N_D
    b) Your per diem table
    I think if you have checked 24 hours in V_T702N_D , then please verify the trip duration on PR05
    If it was working earlier then below might help you...
    For Example:
    Start date/time 23-July-2011 Time 00:00
    End date/time 25-July-2011 Time 00:00
    Here above number of days are three (23,24,25) but calculation for meals shall be done for two days, because for three days per diem calculation it shall be 48:01 Hours  above is 48 Hours..
    Please try in PR05 and check the results.
    Start date/time 23-July-2011 Time 00:00
    End date/time 25-July-2011 Time 00:01
    So please check again and let know in case of problem..
    Regards,
    Muhammad Umer

  • Free for a Day apps - Legal to use in Configurator?

    Today, several paid apps we have our eyes on to purchase for use on our classroom iPads through the VPP program are available free for the day, so I downloaded them and installed them in Apple Configurator, where they indeed show up as being free in the list of apps and can be installed on iDevices without problems.
    We are concerned that somehow this is not legal to do, but I cannot find any verbiage indicating this illegality. I'm assuming that if the app is free, it is truly free, no matter how and where we use it, as we use many free apps in Configurator.
    Using the same logic, if I paid for 10 copies of ComicLife through VPP yesterday, but today ComicLife is free, I could not ask for a refund.
    Does anybody have any definitive information?

    Hi Derek,
    Apple Configurator checks to see if the app is free at the moment you import the app into Apple Configurator. If a free app is imported and Apple Configurator finds that it is no longer free, you will be required to import VPP app codes for it. If the app is still free as you import it then it stays free forever on that particular computer. Each computer does this check independently.
    Hope this answers your question!
    ~Joe

  • RMAN Restore is asking for 3 days tapes in place of 1 day tape

    Hi All,
    I'm doing oracle disaster recovery through RMAN and VERITAS on Solaris machine. Version detail is as follows:
    Oracle: 8i (8.1.7.4)
    Veritas: 5.1
    Solaris: 8 (5.8)
    Script to restore and recover database
    run {
    allocate channel c1 type 'sbt_tape';
    restore database;
    recover database;
    Daily we are doing full RMAN backup (Level 0). I've restored the catalogs of veritas upto 16th Jan. Catalog Database (RMAN) is upto latest (16th). While restoring, its asking for 3 days tapes (12 Jan,13 Jan,14 Jan). Why it is asking for 3 days tapes and why not it asking only latest tapes that is of 15 th Jan. How can it possible for me to restrict it only one day and that is of choice means if I want to restore/recover until 13 then I should provide tape of 13th Jan only and If I want to recover upto 15th then I should provide tapes of 15th Jan only.
    Regards
    Rakesh

    What do you mean by doing disaster recovery through net vertias ? what made this situtation to accour at your end ? And what are the techniques you are using to accomplish disaster recovery , by seeing your commands i believe it is just a simple restore and recovery .one more thing i like to ask is What do you mean by saying the you restored the catalog to 16th of jan ?
    hare krishna
    Alok

  • HT1491 My daughter accidentally tap the HD version instead of the SD version because I have an older IPhone version.  Can I have a refund for the price difference?

    My daughter accidentally tap the HD version instead of the SD version of the tv episode we're downloading.  I have IPhone 3G.  Can we stop the download?  Also can we refund the price difference between HD & SD version?

    All sales are final.
    You can try contacting itunes support and asking for an exception:
    http://www.apple.com/support/itunes/contact/

  • I purchased a full album and as it was downloading it stopped out of nowhere and all the music that was downloading said download error. Tap to retry. So i taped all of them then it said it couldnt be downloaded at this time. Its been like this for 2 days

    I purchased a full album and as it was downloading it stopped out of nowhere and all the music that was downloading said download error. Tap to retry. So i tapped all of them then it said it couldnt be downloaded at this time. Its been like this for 2 days. Help me!!!

    Have you tried redownloading on computer and syncing?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Would it be possible to configure wi-fi airtime per day/week for my children. They have an iPhone/ipad device and trend to watch the screen every free moment of their time.....

    Good morning.
    Would it be possible to configure wi-fi airtime per day/week for my children. They have an iPhone/ipad device and trend to watch the screen every free moment of their time.....

    Hello rogier111
    Maybe this helps:
    Open AirPort Utility, select your AirPort Base Station and click Manual Setup.
    Select Access Control Tab.
    Pick Timed Access from the list.
    Now click on the "+" button, enter the MAC adress of the device you want and decide for the network time limits.
    Update your Airport.
    You can find the MAC adress of an iOS device by going to Settings/General/About.

  • Dunning interest calculation - taking 360 days instead of 365 days

    Dear Friends,
    I have done the dunning customization and forms are generating properly including the days in arrears.  But for the dunning interest calculation, it is taking only 360 days instead of 365 days. Because of this, there is a difference in interest amount in dunning (F150 tcode) and interest calculation (FINT tcode).
    Please guide me how to resolve this issue.
    Thanks in advance for your help.
    Regards,
    Dwarak.

    hi
    check the below configuration.
    spro-
    interest calculations- global settings-
    prepare item interest calculation/prepare balance interest calculations.
    here you select calender type : G(365 days)
    chandra

  • Multicast works for a day and then stops

    I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons.  It works consistently on 3 out of 6 WLAN's.  And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing.  I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC.  2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan.  I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day.  I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning.  It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on.  It started doing this after upgrading to 7.0.240.0.  We have very little amount of multicast traffic on wireless, and low channel utilization.  It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates.  When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller.  It shouldn't be wired config related since it's unicast mode.  I've tried with and without broadcasting enabled.  Any ideas?

    Okay, so I discovered two things, but I still don't know what caused this problem.  When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug.  This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day.  When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day.  So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast. 
    What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power).  This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again.  Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those.  I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again.  Or maybe reboot after changing EAP-Broadcast Key interval.

  • The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

    The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • MRP Shipment day instead requirement day

    Good morning, we are implementing MRP and having problems with components since we have scheduling agreements for suppliers and already input the value of 5 days in planned delivery time in MRP2. But at the time or running MRP, the system is not considering this value for requirement of material. Do you know if Iu2019m missing something in order to let suppliers know about the shipment day instead of the requirement day at plant? Thanks!

    Dear ,
    Kindly compare both Info Record Set up and Material Master  in terms of planned delivery time :
    1.You maintain the non-vendor-specific planned delivery time in the material master (view "MRP 2"). You enter a vendor-specific planned delivery time in the purchasing info record or in the outline agreement. It is used in the planning run, if the indicator "Scheduling info record/agreement" in Customizing is maintained as a plant parameter (OPPQ) or MRP group parameter in 'external procurement' and if, in the area of automatic source determination, an individual vendor can be assigned.
    If you set this indicator, the system checks whether a planned delivery time is entered in the purchasing info record or in the outline agreement. This planned delivery time is then used to calculate the delivery date and the release date.
    2.In case of info record if you maintain the shed info record/agree in the configuration in plant parameters -OPPQ under the tab external procurement, then system will pick the time from Info Record Frist .Or elese it will take the Planned Delievery Time from Material Master .
    Regards
    JH
    Edited by: Jiaul Haque on Feb 16, 2010 6:51 AM

  • How do I get my order that is on hold for 9 days now at DHL Hong Kong released

    My order was made Oct 4, 2013. Filled and shipped on Oct 17, 18 2013. It went as per the DHL report as follows:
    7317364106 - Detailed Report
    Date
    Time
    Location Service Area
    Checkpoint Details
    Oct 26, 2013
    04:10
    Mnl - MNL
    Clearance delay - Mnl - MNL
    Oct 25, 2013
    02:37
    Mnl - MNL
    Clearance delay - Mnl - MNL
    Oct 24, 2013
    02:33
    Mnl - MNL
    Clearance delay - Mnl - MNL
    Oct 23, 2013
    03:04
    Mnl - MNL
    Clearance delay - Mnl - MNL
    Oct 22, 2013
    11:53
    Mnl - MNL
    Processed for clearance - Mnl - MNL
    Oct 22, 2013
    11:45
    Mnl - MNL
    Clearance delay - Mnl - MNL
    Oct 21, 2013
    08:27
    Hkg - HKG
    Shipment on hold - Hkg - HKG
    Oct 20, 2013
    08:48
    Hkg - HKG
    Shipment on hold - Hkg - HKG
    Oct 19, 2013
    08:56
    Hkg - HKG
    Shipment on hold - Hkg - HKG
    Oct 19, 2013
    06:15
    Hkg - HKG
    Clearance processing complete - Hkg - HKG
    Oct 18, 2013
    11:23
    Pvg - PVG
    Clearance processing complete - Pvg - PVG
    Oct 18, 2013
    08:11
    Pvg - PVG
    Clearance delay - Pvg - PVG
    Oct 17, 2013
    19:00
    Sha - SHA
    Departed from facility - Sha - SHA
    Oct 17, 2013
    18:56
    Sha - SHA
    Processed - Sha - SHA
    Oct 17, 2013
    18:12
    Sha - SHA
    Shipment picked up - Sha - SHA
    On Oct 24, 2013 I received a new invoice with a different ship date of Nov 12-14, 2013 and will be deleveried in 5 to 7 days after it is shipped.
    How can I have a iMac ordered, built to my configuration and shipped and made it half way to my home to be on delay and then be built again and shipped again?
    I ordered my Apple iMac and misc. other items that totaled $4200.00 and part of it has been delivered already. Now the main item is being delayed for the last 9 days and then I receive a new invoice? I don't get it. Why do they have it on delay for 9 days when it could have been delivered long ago. I should be enjoying the new iMac not being upset about the current events that are unfolding. I am loosing my confidence in Apple!
    Jwwpapa, DaddyJohn

    Thank you Klaus1 for your reply. I have contacted DHL and for 5 days now they haven't replied to my request. Also I know the order will be released when they want to release it. That's the breaks I guess. The other part of my question was about the second invoice and shipment from Apple. Have they lost contact in their computer of the first shipment or what? If so they need to get it together and fix what could be a big problem not only for me but so many more.
    Thanks Daddy John

  • Exchange Admin Center 2013 SP1 worked for a day and then stopped working, possible OAB problems

    Here is a problem that has me confused. On a fresh Windows Server 2012 R2, I installed Exchange 2013 SP1. It was successful and for the first day everything was working well. I then installed all security updates. The next day, I could no longer log in to
    the Outlook Web App or Exchange Admin Center. I get the generic "something went wrong" message, and the only details are X-FEServer: LAKEVIEW-SERVER (our server name). Nothing else. In the event viewer, I have the logs below every time I try to log
    in. This is repeatable. Every time I attempt to log in the same 3 things appear in the Application Log.
    Event 1003, MSExchange Front End HTTP Proxy [Oab] An internal server error occurred. The unhandled exception was: System.Configuration.ConfigurationErrorsException: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
    does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
    type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Event 4999, MSExchange Common Watson report about to be sent for process id: 2460 (IIS Worker Process, w3wp.exe), with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangeOABAppPool, System.Web, S.W.C.HandlerFactoryCache.GetHandlerType,
    S.Configuration.ConfigurationErrorsException, e0bc, 04.00.30319.34009. ErrorReportingEnabled: True
    Event 1310, ASP.NET 4.0.30319.0 Event code: 3008 Event message: A configuration error has occurred. Event time: 5/8/2014 9:46:45 AM Event time (UTC): 5/8/2014 4:46:45 PM Event ID: 2c98a65728a7475db0212291e3934ab7
    Event sequence: 19 Event occurrence: 9 Event detail code: 0   Application information:     Application domain: /LM/W3SVC/1/ROOT/OAB-1-130440407246522811     Trust level: Full     Application Virtual Path: /OAB
        Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\OAB\     Machine name: LAKEVIEW-SERVER   Process information:     Process ID: 2460 (IIS Worker Process, w3wp.exe)
        Process name: w3wp.exe     Account name: NT AUTHORITY\SYSTEM   Exception information:     Exception type: ConfigurationErrorsException     Exception message: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
    does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
    type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    
    Request information:     Request URL: https://localhost:443/OAB/     Request path: /OAB/     User host address: ::1     User:       Is authenticated: False     Authentication
    Type:       Thread account name: NT AUTHORITY\SYSTEM   Thread information:     Thread ID: 18     Thread account name: NT AUTHORITY\SYSTEM     Is impersonating: False     Stack
    trace:    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String type)   
    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    My first guess is to reset the Outlook Address Book by using the Remove-OabVirtualDirectory Exchange commandlet. But I am not so sure this will work because Exchange worked for a day. Any help understanding what caused the problem (and thus help avoid it
    happening again) and how to fix it are appreciated. Thanks.

    hi,
    If nothing works try resetting the Virtual Directories.
    For  owa 
    Open Exchange Management Shell (EMS), and then run the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication:
    set-Owavirtualdirectory -identity "MBX\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false
    -Formsauthentication $false
    Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
    iisreset /noforce
    For  ECP
    Start Windows PowerShell.
    Type the following commands, and then press Enter after each line:
    Add-PSSnapin *exchange*
    Set-EcpVirtualDirectory -Identity "MBX\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
    Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
    iisreset /noforce
    For Ref: http://technet.microsoft.com/en-us/library/bb123752(v=exchg.150).aspx
    I did those commands. But remember, the original error I gave was related to the OAB virtual directory, not ECP or OWA. I also did the Remove-EcpVirtualDirectory, Remove-OabVirtualDirectory, and Remove-OwaVirtualDirectory commandlets and the corresponding
    EcpVirtualDirectoryOabOwaVirtualDirecoty ones. I still cannot log in to the Exchange Admin Center. And I still have the same original generic unhelpful error message.
    However, there are some changes. After I removed and re-added the virtual directories I no longer received the original error logs given above. I now get this log in the event viewer:
    Event 2001, MSExchange Front End HTTP Proxy
    [Owa] Failed to load SSL certificate.
    The first logs I gave above always appeared after attempting to log in. This log that I gave appears infrequently and is not connected to any log in events. This log occurs only
    after a similar log given below:
    Event 1001, MSExchange Front End HTTP Proxy
    [Owa] Application Starting.

Maybe you are looking for