Configure Multiple App Servers to Use Same Files from Network Share?

Application Server v10.1.2
We're currently running Oracle Forms and Reports for a legacy application. It is served up by 8 app servers who pull the files from a single file server. We are beginning to transition pieces of this application to Java; how would we configure the OC4J instances on all 8 machines to pull the Java files from the single file server? In my experience I've always just logged into each app server, gone into the OC4J instance, pointed it to my ear file and let it install(course, I only had to manage one or two servers, never 8). That doesn't seem like that would work in this distributed configuration.
Any suggestions?

You can cluster your Application Servers, and then deploy your EAR to the cluster insted of deploying the EAR on a single OC4J.
Bye,
Andrea

Similar Messages

Excel 2013 hangs while trying to open a file from network share

Hi,
I am having issue opening excel file from a network share. it happens randomly, the file opens and hangs abruptly. Nothing happens after that ( we can only move the cursor), if we click on the excel sheet we get a beep sound. after i kill the excel process
and open it again ,it works fine.
Where did the member use the Excel file? Local disk, SharePoint, File server, or network shared disk?
       Network shared file and sometime locally
Does the issue occur in the special file or every file?
      it happens randomly and the whole excel freezes. i have to kill the excel session.
Which Office version is the file created? Excel 2013 or early? If it is XLS format, please try to convert to XLSX to test.
   Network file server has office 2010 and the user is trying to open it in excel 2013
Does the file have some macros?
Yes, they have macros in some files
Does the issue occur recently? If it is, have you installed some programs or update before you encountered it?
       it happened before too.
Do you get some error message when Excel crashed?
Yeah. Attaching the error message from event viewer. We get file corrupt errors and below too.
Please suggest

Hi Suren424,
Since your first image showed that "To see if more information about the problem is available, check the problem history in the Action Center control panel." Please go to this path (Control Panel\All Control Panel Items\Action Center\Problem Reports)
to check the detailed information, and you might upload the screenshot or info here.
Then, please try the following methods and check if they are helpful:
1. File --> Options --> Advanced --> uncheck "Ignore other applications that use Dynamic Data Exchange (DDE)"
2. Turn off "Protected View" --> (File –-> Options –-> Trust Center --> Protected View --> Uncheck all options
3. I notice that >>Network file server has office 2010 and the user is trying to open it in excel 2013 <<, it also might be caused by the Microsoft Office File Validation for Office 2010, please try to change setting in server with
the link:
http://support.microsoft.com/kb/2501584
If you have any update , please feel free let us know.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Issue opening files from Network Share

We have a new windows 7 PC x64 with Illustrator CS6, when we open a file from our server share, it only utilises 25% of the available network bandwidth to open the file.
On an older XP 32 bit machine it utilises the full bandwidth ie 100% so the file opens up to 6 times faster.
When I copy the file from the network to either machine machine it copies fine and uses 99% of the network speed.
What can I do to my new machine to speed the transfer of data in illustrator?

General advise on working directly on a server using Illustrator: Don't
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Reading Files From Network Share

I am attempting to read files on a shared volume of a Windows 2003 machine from a Forte client (win2k - 5.0.26). If doing this is possible, how does one reference a remote file?
Thanks,
-skynet-

Fortever,
Thanks for the quick response. Your code segment is what I thought it would be. However, when I try that, I get:
SYSTEM ERROR: System Error: No such file or directory, opening
'\\devServer\testDir\test.txt' with mode 'rb'
Class: qqos_FileResourceException
Error #: [101, 184]
Detected at: qqos_File::Open at 4
I'm using forte version 5.0.26. Is it possible that this is something that is corrected in a later version?
Thanks,
-skynet-

BSPs configuration with multiple apps servers

Hi Masters,
This is regrarding configure ICM and BSPs on our production box with multiple application servers.
We have our production box in a cluster environment.
The central instance is dbciSAP and apps servers are sapaps2 thru sapaps6. The database is on shared disks. Whenever the central instance fails sapaps2 takes the control and become as dbciSAP but the main dbciSAP never become a application server when ever sapaps2 acts as dbciSAP. Since we have configured load balancing concept in production environment the users can login to system thru any application server. This is waht our environment.
As part of our production box to SAP 4.7 upgrade from 4.6C, we are asked to configure the environment to deploy BSPs. We have successfully configured and deployed the BSPs in our DEV and QAS system (Both are central instances with no application servers) except production box which is due in the next month.
The process we follow to activate BSPs is as follows:
1.Define an ICM service port in /etc/services file.
2.Add the ICM related parameters in instance profiles.
3.Make sure the ICM status is active in SMICM tx.
4.Activate the BSP services in SICF as per OSS note 571484.
Now, the question is how to configure the same ICM service and activate the BSPs since we have multiple multiple application servers.
Subsequently What I am enquirying is:
Do I need to define ICM service ports on each and every hosts where the application servers are running?
Do I need to make changes to each and every instance profile of the application server?
What are the differences in configuring ICM services on central instance and application instances?
Appreciate any help in this regard.
Thanks and Regards
Murty Patchipala

Grasshopper,
I think what you should really read up on is the SAP WebDispatcher. If are serious about running BSP/ICM across multiple app servers, this is the key technology:
http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm This may also answer some of your questions about profile parameters.
Other than that I can share what we did. We did activate the ICM and services on all app servers and central instance. The service ports of the individual servers aren't that important now because of the WebDispatcher (at least they aren't visible to the user).
Yes we did make some of the ICM profile changes in each instance profile. If your settings are the same, consider using the default profile. Are their particular settings you are interested? I will look over ours, but I don't remember any huge differences from APP server to Central Instance.

How to configure multiple smtp servers per domain

Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

How to configure multiple report servers in Oracle 10 G R2?

I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

The Windows SMB feature has file locking if multiple users are accessing the same file. Does Snow Leopard Server File Sharing (AFP) provide similar features?

The Windows SMB feature has file locking if multiple users are accessing the same file. Does File Sharing (AFP) on Snow Leopard Server provide similar services?

Were you ever able to solve this problem. I'm having similar issues since upgrading to snow leopard. Four macs connect to a Windows Server 2003 for shared files. Each user has full permissions & when we "get info" it shows read & write permissions. Two of the computers were running 10.4, two were running 10.5. Everything worked properly until upgrading to snow leopard. Some files let me copy, move, delete. Others either just hang up or we get a "no permission" error. Also getting a "pdf is in use" error, even when the file/folder doesn't contain a pdf. We had our IT rep check the server who said everything is in working order. They don't represent macs any longer but feel that it's a mac problem. I would have to agree since this problem only started after the upgrade, and the one machine that was not upgraded (still running 10.5.8) is not dealing with these problems.
Lastly, I would install 10.5 back on all of the computers if I could, but the leopard disk that came with one of the computers wouldn't work with the 2 machines running 10.4 and I didn't see it available at the apple store. I'll buy it if it's still available, but why wouldn't the disks that I have work?
Thanks for any help

Photoshop CS4- Does anyone know how to tell if two people are using same file?

Photoshop CS4- Does anyone know how to tell if two people are using same file?

Hi,
Thanks for your response. I'm not the solution in the link.
The problem that I am having at work it that several people in our department want to be able to update a file, but we want to be sure that no one else is currently editing that file. If someone has the file open, it's helpful to know the user's name so we can talk about when the next person can edit the file. This works in Excel files that we use, and I would love to find out how to do it in Photoshop and Illustrator.
Thanks for the help!

TS1702 Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store its showing paid application in apps store with using same apple ID account. Please re

Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store its showing paid application in apps store with using same apple ID account.

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

How to use .mod files from a JVC camcorder?

Hi All,
I'm trying to find the proper workflow for using .mod files from a JVC Everio model camcorder. I was able to transfer the files onto my system by simply using the included usb cable from the unit. It simply mounted the camera's flash card on my desktop and I was able to drag all of the files from it.
As others have posted, the .mod files are not accessible using the Import function in FCP. I am able to open them with MPEGStreamClip as other have suggested. My question is, how should the files be converted to use with FCP and/or DVDSP? In MPEGStreamclip the file shows the video stream as: 224 MPEG-2, 720 × 480, 16:9, 29.97 fps, 8.40 Mbps, upper field first. I tried a few of the demux functions. The straight demux to .m2v & .ac3 yields a file that opens in QT, but it shows up as a 640x480 file and is noticably squeezed. Using the demux unscaled yields a file that opens in QT as a 720x480 file and looks somewhat better. And using the demux to headed yields as file that opens in QT as 720x404 and presumably is the correct 16:9 ratio.
Trying to use those same files in DVDSP didn't get me very far. If I create a new HD project in DVDSP I can import the straight demuxed file and the headed file. The unscaled file won't import. If I add the imported files to tracks the straight demuxed one will play in the simulator but the headed one simply shows a green screen.
I'm hoping that since MPEGStreamclip can play the files, its just a question of figuring out the proper export/conversion settings. My end goal is to produce a dvd of the footage (not exactly sure if I should be using an HD project or a SD project set to letterbox). I also need to produce a web-ready version of the footage. I haven't tried this yet but I'm assuming that one of the QT exports from MPEGStreamclip will get this done correctly.
Hopefully someone has a workable solution for these files.
Thanks,
Chris

Hi all,
I looked further on this forum and found others that had the same problem. One suggested connecting the cam corder first, then start iMovie, then wait for a few minutes. I did this and it worked!!!!!
Problem solved.
Thanks.

Can I use mp3 files from different domain as the feed?

Hi..
I have just created a new podcast here:
http://artistsofliving.com/?feed=podcast
I would like to submit the podcast to iTunes sometime soon...
However, I'm wondering if they will reject it because the feed lives on 'artistsofliving.com', whereas I keep the media mp3 files on 'livinginthepresent.com'... a different domain.
I own the mp3 content and both domains- I'm splitting the media from the website for bandwidth reasons.
Is this ok? If this causes a rejection straight out is there a way to indicate that I own the material fairly?
Thanks!
-rich

There's no problem about using media files from any source: the feed just has to reference them (the URLs have to be 'absolute' - i.e. including the http:// and the server name - even if the file is on the same server as the feed anyway). I don't see the fact that some files have different URLs leading to accusations of copyright breach.

What app do I use to print from iPad to a printer.

What app do I use to print from iPad to printer.

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

Call ggsci using batch file from windows- get error

i create a script to use ggsci, start manager, extract and replicat.
i have success doing this in my linux.
here is one of my script : start_ext1.sh
cd /u01/app/oracle/ggs
./ggsci <<EOF
start manager
start ext_s
exit
EOF
clear
i have an error when i do this using batch file from windows.
here is the batch file :
@echo off
cd C:\putty
plink.exe -ssh -2 -P 22 [email protected] -pw oracle "./start_ext1.sh"
every time i try to enter ggsci when i run that batch file, i get this error :
./ggsci: error while loading shared libraries: libnnz10.so: cannot open shared object file: No such file or directory
i didn't get this error when i run the script in linux.
is there anybody can help me?
thanks a lot!

problem solved!
add : . ./.bash_profile before enter ggsci.
it's worked! :)

Configure Multiple App Servers to Use Same Files from Network Share?

Similar Messages

Maybe you are looking for